/// corresponds to X86::PSRLDQ.
FSRL,
- /// FILD, FILD_FLAG - This instruction implements SINT_TO_FP with the
- /// integer source in memory and FP reg result. This corresponds to the
- /// X86::FILD*m instructions. It has three inputs (token chain, address,
- /// and source type) and two outputs (FP value and token chain). FILD_FLAG
- /// also produces a flag).
- FILD,
- FILD_FLAG,
-
- /// FP_TO_INT*_IN_MEM - This instruction implements FP_TO_SINT with the
- /// integer destination in memory and a FP reg source. This corresponds
- /// to the X86::FIST*m instructions and the rounding mode change stuff. It
- /// has two inputs (token chain and address) and two outputs (int value
- /// and token chain).
- FP_TO_INT16_IN_MEM,
- FP_TO_INT32_IN_MEM,
- FP_TO_INT64_IN_MEM,
-
- /// FLD - This instruction implements an extending load to FP stack slots.
- /// This corresponds to the X86::FLD32m / X86::FLD64m. It takes a chain
- /// operand, ptr to load from, and a ValueType node indicating the type
- /// to load to.
- FLD,
-
- /// FST - This instruction implements a truncating store to FP stack
- /// slots. This corresponds to the X86::FST32m / X86::FST64m. It takes a
- /// chain operand, value to store, address, and a ValueType to store it
- /// as.
- FST,
-
/// CALL - These operations represent an abstract X86 call
/// instruction, which includes a bunch of information. In particular the
/// operands of these node are:
///
CALL,
- /// RDTSC_DAG - This operation implements the lowering for
+ /// RDTSC_DAG - This operation implements the lowering for
/// readcyclecounter
RDTSC_DAG,
/// X86 bit-test instructions.
BT,
- /// X86 SetCC. Operand 0 is condition code, and operand 1 is the flag
- /// operand produced by a CMP instruction.
+ /// X86 SetCC. Operand 0 is condition code, and operand 1 is the EFLAGS
+ /// operand, usually produced by a CMP instruction.
SETCC,
// Same as SETCC except it's materialized with a sbb and the value is all
// one's or all zero's.
- SETCC_CARRY,
+ SETCC_CARRY, // R = carry_bit ? ~0 : 0
/// X86 conditional moves. Operand 0 and operand 1 are the two values
/// to select from. Operand 2 is the condition code, and operand 3 is the
/// relative displacements.
WrapperRIP,
- /// MOVQ2DQ - Copies a 64-bit value from a vector to another vector.
- /// Can be used to move a vector value from a MMX register to a XMM
- /// register.
+ /// MOVQ2DQ - Copies a 64-bit value from an MMX vector to the low word
+ /// of an XMM vector, with the high word zero filled.
MOVQ2DQ,
+ /// MOVDQ2Q - Copies a 64-bit value from the low word of an XMM vector
+ /// to an MMX vector. If you think this is too close to the previous
+ /// mnemonic, so do I; blame Intel.
+ MOVDQ2Q,
+
/// PEXTRB - Extract an 8-bit value from a vector and zero extend it to
/// i32, corresponds to X86::PEXTRB.
PEXTRB,
/// PINSRW - Insert the lower 16-bits of a 32-bit value to a vector,
/// corresponds to X86::PINSRW.
- PINSRW,
+ PINSRW, MMX_PINSRW,
/// PSHUFB - Shuffle 16 8-bit values within a vector.
PSHUFB,
-
+
+ /// PANDN - and with not'd value.
+ PANDN,
+
+ /// PSIGNB/W/D - Copy integer sign.
+ PSIGNB, PSIGNW, PSIGND,
+
+ /// PBLENDVB - Variable blend
+ PBLENDVB,
+
/// FMAX, FMIN - Floating point max and min.
///
FMAX, FMIN,
// TLSADDR - Thread Local Storage.
TLSADDR,
- // SegmentBaseAddress - The address segment:0
- SegmentBaseAddress,
+ // TLSCALL - Thread Local Storage. When calling to an OS provided
+ // thunk at the address from an earlier relocation.
+ TLSCALL,
// EH_RETURN - Exception Handling helpers.
EH_RETURN,
-
+
/// TC_RETURN - Tail call return.
/// operand #0 chain
/// operand #1 callee (register or absolute)
/// operand #3 optional in flag
TC_RETURN,
- // LCMPXCHG_DAG, LCMPXCHG8_DAG - Compare and swap.
- LCMPXCHG_DAG,
- LCMPXCHG8_DAG,
-
- // FNSTCW16m - Store FP control world into i16 memory.
- FNSTCW16m,
-
// VZEXT_MOVL - Vector move low and zero extend.
VZEXT_MOVL,
- // VZEXT_LOAD - Load, scalar_to_vector, and zero extend.
- VZEXT_LOAD,
-
// VSHL, VSRL - Vector logical left / right shift.
VSHL, VSRL,
// CMPPD, CMPPS - Vector double/float comparison.
// CMPPD, CMPPS - Vector double/float comparison.
CMPPD, CMPPS,
-
+
// PCMP* - Vector integer comparisons.
PCMPEQB, PCMPEQW, PCMPEQD, PCMPEQQ,
PCMPGTB, PCMPGTW, PCMPGTD, PCMPGTQ,
- // ADD, SUB, SMUL, UMUL, etc. - Arithmetic operations with FLAGS results.
- ADD, SUB, SMUL, UMUL,
+ // ADD, SUB, SMUL, etc. - Arithmetic operations with FLAGS results.
+ ADD, SUB, ADC, SBB, SMUL,
INC, DEC, OR, XOR, AND,
+
+ UMUL, // LOW, HI, FLAGS = umul LHS, RHS
// MUL_IMM - X86 specific multiply by immediate.
MUL_IMM,
-
+
// PTEST - Vector bitwise comparisons
PTEST,
+ // TESTP - Vector packed fp sign bitwise comparisons
+ TESTP,
+
+ // Several flavors of instructions with vector shuffle behaviors.
+ PALIGN,
+ PSHUFD,
+ PSHUFHW,
+ PSHUFLW,
+ PSHUFHW_LD,
+ PSHUFLW_LD,
+ SHUFPD,
+ SHUFPS,
+ MOVDDUP,
+ MOVSHDUP,
+ MOVSLDUP,
+ MOVSHDUP_LD,
+ MOVSLDUP_LD,
+ MOVLHPS,
+ MOVLHPD,
+ MOVHLPS,
+ MOVHLPD,
+ MOVLPS,
+ MOVLPD,
+ MOVSD,
+ MOVSS,
+ UNPCKLPS,
+ UNPCKLPD,
+ UNPCKHPS,
+ UNPCKHPD,
+ PUNPCKLBW,
+ PUNPCKLWD,
+ PUNPCKLDQ,
+ PUNPCKLQDQ,
+ PUNPCKHBW,
+ PUNPCKHWD,
+ PUNPCKHDQ,
+ PUNPCKHQDQ,
+
// VASTART_SAVE_XMM_REGS - Save xmm argument registers to the stack,
// according to %al. An operator is needed so that this can be expanded
// with control flow.
VASTART_SAVE_XMM_REGS,
- // ATOMADD64_DAG, ATOMSUB64_DAG, ATOMOR64_DAG, ATOMAND64_DAG,
- // ATOMXOR64_DAG, ATOMNAND64_DAG, ATOMSWAP64_DAG -
+ // WIN_ALLOCA - Windows's _chkstk call to do stack probing.
+ WIN_ALLOCA,
+
+ // Memory barrier
+ MEMBARRIER,
+ MFENCE,
+ SFENCE,
+ LFENCE,
+
+ // ATOMADD64_DAG, ATOMSUB64_DAG, ATOMOR64_DAG, ATOMAND64_DAG,
+ // ATOMXOR64_DAG, ATOMNAND64_DAG, ATOMSWAP64_DAG -
// Atomic 64-bit binary operations.
ATOMADD64_DAG = ISD::FIRST_TARGET_MEMORY_OPCODE,
ATOMSUB64_DAG,
ATOMXOR64_DAG,
ATOMAND64_DAG,
ATOMNAND64_DAG,
- ATOMSWAP64_DAG
+ ATOMSWAP64_DAG,
+
+ // LCMPXCHG_DAG, LCMPXCHG8_DAG - Compare and swap.
+ LCMPXCHG_DAG,
+ LCMPXCHG8_DAG,
+
+ // VZEXT_LOAD - Load, scalar_to_vector, and zero extend.
+ VZEXT_LOAD,
+
+ // FNSTCW16m - Store FP control world into i16 memory.
+ FNSTCW16m,
+
+ /// FP_TO_INT*_IN_MEM - This instruction implements FP_TO_SINT with the
+ /// integer destination in memory and a FP reg source. This corresponds
+ /// to the X86::FIST*m instructions and the rounding mode change stuff. It
+ /// has two inputs (token chain and address) and two outputs (int value
+ /// and token chain).
+ FP_TO_INT16_IN_MEM,
+ FP_TO_INT32_IN_MEM,
+ FP_TO_INT64_IN_MEM,
+
+ /// FILD, FILD_FLAG - This instruction implements SINT_TO_FP with the
+ /// integer source in memory and FP reg result. This corresponds to the
+ /// X86::FILD*m instructions. It has three inputs (token chain, address,
+ /// and source type) and two outputs (FP value and token chain). FILD_FLAG
+ /// also produces a flag).
+ FILD,
+ FILD_FLAG,
+
+ /// FLD - This instruction implements an extending load to FP stack slots.
+ /// This corresponds to the X86::FLD32m / X86::FLD64m. It takes a chain
+ /// operand, ptr to load from, and a ValueType node indicating the type
+ /// to load to.
+ FLD,
+
+ /// FST - This instruction implements a truncating store to FP stack
+ /// slots. This corresponds to the X86::FST32m / X86::FST64m. It takes a
+ /// chain operand, value to store, address, and a ValueType to store it
+ /// as.
+ FST,
+
+ /// VAARG_64 - This instruction grabs the address of the next argument
+ /// from a va_list. (reads and modifies the va_list in memory)
+ VAARG_64
+
+ // WARNING: Do not add anything in the end unless you want the node to
+ // have memop! In fact, starting from ATOMADD64_DAG all opcodes will be
+ // thought as target memory ops!
};
}
/// fit into displacement field of the instruction.
bool isOffsetSuitableForCodeModel(int64_t Offset, CodeModel::Model M,
bool hasSymbolicDisplacement = true);
-
- /// IsEligibleForTailCallOpt - Return true if it's legal to perform tail call
- /// optimization for the given calling convention.
- bool IsEligibleForTailCallOpt(CallingConv::ID CC);
}
//===--------------------------------------------------------------------===//
// X86TargetLowering - X86 Implementation of the TargetLowering interface
class X86TargetLowering : public TargetLowering {
- int VarArgsFrameIndex; // FrameIndex for start of varargs area.
- int RegSaveFrameIndex; // X86-64 vararg func register save area.
- unsigned VarArgsGPOffset; // X86-64 vararg func int reg offset.
- unsigned VarArgsFPOffset; // X86-64 vararg func fp reg offset.
- int BytesToPopOnReturn; // Number of arg bytes ret should pop.
-
public:
explicit X86TargetLowering(X86TargetMachine &TM);
- /// getPICBaseSymbol - Return the X86-32 PIC base.
- MCSymbol *getPICBaseSymbol(const MachineFunction *MF, MCContext &Ctx) const;
-
virtual unsigned getJumpTableEncoding() const;
virtual const MCExpr *
LowerCustomJumpTableEntry(const MachineJumpTableInfo *MJTI,
const MachineBasicBlock *MBB, unsigned uid,
MCContext &Ctx) const;
-
+
/// getPICJumpTableRelocaBase - Returns relocation base for the given PIC
/// jumptable.
virtual SDValue getPICJumpTableRelocBase(SDValue Table,
virtual const MCExpr *
getPICJumpTableRelocBaseExpr(const MachineFunction *MF,
unsigned JTI, MCContext &Ctx) const;
-
- // Return the number of bytes that a function should pop when it returns (in
- // addition to the space used by the return address).
- //
- unsigned getBytesToPopOnReturn() const { return BytesToPopOnReturn; }
/// getStackPtrReg - Return the stack pointer register we are using: either
/// ESP or RSP.
/// getOptimalMemOpType - Returns the target specific optimal type for load
/// and store operations as a result of memset, memcpy, and memmove
- /// lowering. It returns EVT::iAny if SelectionDAG should be responsible for
- /// determining it.
- virtual EVT getOptimalMemOpType(uint64_t Size, unsigned Align,
- bool isSrcConst, bool isSrcStr,
- SelectionDAG &DAG) const;
+ /// lowering. If DstAlign is zero that means it's safe to destination
+ /// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
+ /// means there isn't a need to check it against alignment requirement,
+ /// probably because the source does not need to be loaded. If
+ /// 'NonScalarIntSafe' is true, that means it's safe to return a
+ /// non-scalar-integer type, e.g. empty string source, constant, or loaded
+ /// from memory. 'MemcpyStrSrc' indicates whether the memcpy source is
+ /// constant so it does not need to be loaded.
+ /// It returns EVT::Other if the type should be determined using generic
+ /// target-independent logic.
+ virtual EVT
+ getOptimalMemOpType(uint64_t Size, unsigned DstAlign, unsigned SrcAlign,
+ bool NonScalarIntSafe, bool MemcpyStrSrc,
+ MachineFunction &MF) const;
/// allowsUnalignedMemoryAccesses - Returns true if the target allows
/// unaligned memory accesses. of the specified type.
/// LowerOperation - Provide custom lowering hooks for some operations.
///
- virtual SDValue LowerOperation(SDValue Op, SelectionDAG &DAG);
+ virtual SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const;
/// ReplaceNodeResults - Replace the results of node with an illegal result
/// type with new values built out of custom code.
///
virtual void ReplaceNodeResults(SDNode *N, SmallVectorImpl<SDValue>&Results,
- SelectionDAG &DAG);
+ SelectionDAG &DAG) const;
+
-
virtual SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
- virtual MachineBasicBlock *EmitInstrWithCustomInserter(MachineInstr *MI,
- MachineBasicBlock *MBB,
- DenseMap<MachineBasicBlock*, MachineBasicBlock*> *EM) const;
+ /// isTypeDesirableForOp - Return true if the target has native support for
+ /// the specified value type and it is 'desirable' to use the type for the
+ /// given node type. e.g. On x86 i16 is legal, but undesirable since i16
+ /// instruction encodings are longer and some i16 instructions are slow.
+ virtual bool isTypeDesirableForOp(unsigned Opc, EVT VT) const;
+
+ /// isTypeDesirable - Return true if the target has native support for the
+ /// specified value type and it is 'desirable' to use the type. e.g. On x86
+ /// i16 is legal, but undesirable since i16 instruction encodings are longer
+ /// and some i16 instructions are slow.
+ virtual bool IsDesirableToPromoteOp(SDValue Op, EVT &PVT) const;
+
+ virtual MachineBasicBlock *
+ EmitInstrWithCustomInserter(MachineInstr *MI,
+ MachineBasicBlock *MBB) const;
+
-
/// getTargetNodeName - This method returns the name of a target specific
/// DAG node.
virtual const char *getTargetNodeName(unsigned Opcode) const;
/// getSetCCResultType - Return the ISD::SETCC ValueType
virtual MVT::SimpleValueType getSetCCResultType(EVT VT) const;
- /// computeMaskedBitsForTargetNode - Determine which of the bits specified
- /// in Mask are known to be either zero or one and return them in the
+ /// computeMaskedBitsForTargetNode - Determine which of the bits specified
+ /// in Mask are known to be either zero or one and return them in the
/// KnownZero/KnownOne bitsets.
virtual void computeMaskedBitsForTargetNode(const SDValue Op,
const APInt &Mask,
- APInt &KnownZero,
+ APInt &KnownZero,
APInt &KnownOne,
const SelectionDAG &DAG,
unsigned Depth = 0) const;
+ // ComputeNumSignBitsForTargetNode - Determine the number of bits in the
+ // operation that are sign bits.
+ virtual unsigned ComputeNumSignBitsForTargetNode(SDValue Op,
+ unsigned Depth) const;
+
virtual bool
- isGAPlusOffset(SDNode *N, GlobalValue* &GA, int64_t &Offset) const;
-
- SDValue getReturnAddressFrameIndex(SelectionDAG &DAG);
+ isGAPlusOffset(SDNode *N, const GlobalValue* &GA, int64_t &Offset) const;
+
+ SDValue getReturnAddressFrameIndex(SelectionDAG &DAG) const;
virtual bool ExpandInlineAsm(CallInst *CI) const;
-
+
ConstraintType getConstraintType(const std::string &Constraint) const;
-
- std::vector<unsigned>
+
+ /// Examine constraint string and operand type and determine a weight value.
+ /// The operand object must already have been set up with the operand type.
+ virtual ConstraintWeight getSingleConstraintMatchWeight(
+ AsmOperandInfo &info, const char *constraint) const;
+
+ std::vector<unsigned>
getRegClassForInlineAsmConstraint(const std::string &Constraint,
EVT VT) const;
/// being processed is 'm'.
virtual void LowerAsmOperandForConstraint(SDValue Op,
char ConstraintLetter,
- bool hasMemory,
std::vector<SDValue> &Ops,
SelectionDAG &DAG) const;
-
+
/// getRegForInlineAsmConstraint - Given a physical register constraint
/// (e.g. {edx}), return the register number and the register class for the
/// register. This should only be used for C_Register constraints. On
/// error, this returns a register number of 0.
- std::pair<unsigned, const TargetRegisterClass*>
+ std::pair<unsigned, const TargetRegisterClass*>
getRegForInlineAsmConstraint(const std::string &Constraint,
EVT VT) const;
-
+
/// isLegalAddressingMode - Return true if the addressing mode represented
/// by AM is legal for this target, for a load/store of the specified type.
virtual bool isLegalAddressingMode(const AddrMode &AM, const Type *Ty)const;
// shrink long double fp constant since fldt is very slow.
return !X86ScalarSSEf64 || VT == MVT::f80;
}
-
- /// IsEligibleForTailCallOptimization - Check whether the call is eligible
- /// for tail call optimization. Targets which want to do tail call
- /// optimization should implement this function.
- virtual bool
- IsEligibleForTailCallOptimization(SDValue Callee,
- CallingConv::ID CalleeCC,
- bool isVarArg,
- const SmallVectorImpl<ISD::InputArg> &Ins,
- SelectionDAG& DAG) const;
- virtual const X86Subtarget* getSubtarget() {
+ const X86Subtarget* getSubtarget() const {
return Subtarget;
}
(VT == MVT::f32 && X86ScalarSSEf32); // f32 is when SSE1
}
- /// getWidenVectorType: given a vector type, returns the type to widen
- /// to (e.g., v7i8 to v8i8). If the vector type is legal, it returns itself.
- /// If there is no vector type that we want to widen to, returns EVT::Other
- /// When and were to widen is target dependent based on the cost of
- /// scalarizing vs using the wider vector type.
- virtual EVT getWidenVectorType(EVT VT) const;
-
/// createFastISel - This method returns a target specific FastISel object,
/// or null if the target does not support "fast" ISel.
- virtual FastISel *
- createFastISel(MachineFunction &mf,
- MachineModuleInfo *mmi, DwarfWriter *dw,
- DenseMap<const Value *, unsigned> &,
- DenseMap<const BasicBlock *, MachineBasicBlock *> &,
- DenseMap<const AllocaInst *, int> &
-#ifndef NDEBUG
- , SmallSet<Instruction*, 8> &
-#endif
- );
+ virtual FastISel *createFastISel(FunctionLoweringInfo &funcInfo) const;
/// getFunctionAlignment - Return the Log2 alignment of this function.
virtual unsigned getFunctionAlignment(const Function *F) const;
+ unsigned getRegPressureLimit(const TargetRegisterClass *RC,
+ MachineFunction &MF) const;
+
+ /// getStackCookieLocation - Return true if the target stores stack
+ /// protector cookies at a fixed offset in some non-standard address
+ /// space, and populates the address space and offset as
+ /// appropriate.
+ virtual bool getStackCookieLocation(unsigned &AddressSpace, unsigned &Offset) const;
+
+ protected:
+ std::pair<const TargetRegisterClass*, uint8_t>
+ findRepresentativeClass(EVT VT) const;
+
private:
/// Subtarget - Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
/// X86StackPtr - X86 physical register used as stack ptr.
unsigned X86StackPtr;
-
- /// X86ScalarSSEf32, X86ScalarSSEf64 - Select between SSE or x87
+
+ /// X86ScalarSSEf32, X86ScalarSSEf64 - Select between SSE or x87
/// floating point ops.
/// When SSE is available, use it for f32 operations.
/// When SSE2 is available, use it for f64 operations.
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::InputArg> &Ins,
DebugLoc dl, SelectionDAG &DAG,
- SmallVectorImpl<SDValue> &InVals);
+ SmallVectorImpl<SDValue> &InVals) const;
SDValue LowerMemArgument(SDValue Chain,
CallingConv::ID CallConv,
const SmallVectorImpl<ISD::InputArg> &ArgInfo,
DebugLoc dl, SelectionDAG &DAG,
const CCValAssign &VA, MachineFrameInfo *MFI,
- unsigned i);
+ unsigned i) const;
SDValue LowerMemOpCallTo(SDValue Chain, SDValue StackPtr, SDValue Arg,
DebugLoc dl, SelectionDAG &DAG,
const CCValAssign &VA,
- ISD::ArgFlagsTy Flags);
+ ISD::ArgFlagsTy Flags) const;
// Call lowering helpers.
- bool IsCalleePop(bool isVarArg, CallingConv::ID CallConv);
+
+ /// IsEligibleForTailCallOptimization - Check whether the call is eligible
+ /// for tail call optimization. Targets which want to do tail call
+ /// optimization should implement this function.
+ bool IsEligibleForTailCallOptimization(SDValue Callee,
+ CallingConv::ID CalleeCC,
+ bool isVarArg,
+ bool isCalleeStructRet,
+ bool isCallerStructRet,
+ const SmallVectorImpl<ISD::OutputArg> &Outs,
+ const SmallVectorImpl<SDValue> &OutVals,
+ const SmallVectorImpl<ISD::InputArg> &Ins,
+ SelectionDAG& DAG) const;
+ bool IsCalleePop(bool isVarArg, CallingConv::ID CallConv) const;
SDValue EmitTailCallLoadRetAddr(SelectionDAG &DAG, SDValue &OutRetAddr,
SDValue Chain, bool IsTailCall, bool Is64Bit,
- int FPDiff, DebugLoc dl);
+ int FPDiff, DebugLoc dl) const;
- CCAssignFn *CCAssignFnForNode(CallingConv::ID CallConv) const;
- NameDecorationStyle NameDecorationForCallConv(CallingConv::ID CallConv);
- unsigned GetAlignedArgumentStackSize(unsigned StackSize, SelectionDAG &DAG);
+ unsigned GetAlignedArgumentStackSize(unsigned StackSize,
+ SelectionDAG &DAG) const;
std::pair<SDValue,SDValue> FP_TO_INTHelper(SDValue Op, SelectionDAG &DAG,
- bool isSigned);
+ bool isSigned) const;
SDValue LowerAsSplatVectorLoad(SDValue SrcOp, EVT VT, DebugLoc dl,
- SelectionDAG &DAG);
- SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG);
- SDValue LowerCONCAT_VECTORS(SDValue Op, SelectionDAG &DAG);
- SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG);
- SDValue LowerEXTRACT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG);
- SDValue LowerEXTRACT_VECTOR_ELT_SSE4(SDValue Op, SelectionDAG &DAG);
- SDValue LowerINSERT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG);
- SDValue LowerINSERT_VECTOR_ELT_SSE4(SDValue Op, SelectionDAG &DAG);
- SDValue LowerSCALAR_TO_VECTOR(SDValue Op, SelectionDAG &DAG);
- SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG);
- SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG);
+ SelectionDAG &DAG) const;
+ SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerCONCAT_VECTORS(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerEXTRACT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerEXTRACT_VECTOR_ELT_SSE4(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerINSERT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerINSERT_VECTOR_ELT_SSE4(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerSCALAR_TO_VECTOR(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerGlobalAddress(const GlobalValue *GV, DebugLoc dl,
int64_t Offset, SelectionDAG &DAG) const;
- SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG);
- SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG);
- SDValue LowerExternalSymbol(SDValue Op, SelectionDAG &DAG);
- SDValue LowerShift(SDValue Op, SelectionDAG &DAG);
+ SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerExternalSymbol(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerShift(SDValue Op, SelectionDAG &DAG) const;
SDValue BuildFILD(SDValue Op, EVT SrcVT, SDValue Chain, SDValue StackSlot,
- SelectionDAG &DAG);
- SDValue LowerSINT_TO_FP(SDValue Op, SelectionDAG &DAG);
- SDValue LowerUINT_TO_FP(SDValue Op, SelectionDAG &DAG);
- SDValue LowerUINT_TO_FP_i64(SDValue Op, SelectionDAG &DAG);
- SDValue LowerUINT_TO_FP_i32(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFP_TO_SINT(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFP_TO_UINT(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFABS(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFNEG(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFCOPYSIGN(SDValue Op, SelectionDAG &DAG);
- SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG);
- SDValue LowerVSETCC(SDValue Op, SelectionDAG &DAG);
- SDValue LowerSELECT(SDValue Op, SelectionDAG &DAG);
- SDValue LowerBRCOND(SDValue Op, SelectionDAG &DAG);
- SDValue LowerMEMSET(SDValue Op, SelectionDAG &DAG);
- SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG);
- SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG);
- SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG);
- SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG);
- SDValue LowerVACOPY(SDValue Op, SelectionDAG &DAG);
- SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG);
- SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFRAME_TO_ARGS_OFFSET(SDValue Op, SelectionDAG &DAG);
- SDValue LowerEH_RETURN(SDValue Op, SelectionDAG &DAG);
- SDValue LowerTRAMPOLINE(SDValue Op, SelectionDAG &DAG);
- SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG);
- SDValue LowerCTLZ(SDValue Op, SelectionDAG &DAG);
- SDValue LowerCTTZ(SDValue Op, SelectionDAG &DAG);
- SDValue LowerMUL_V2I64(SDValue Op, SelectionDAG &DAG);
- SDValue LowerXALUO(SDValue Op, SelectionDAG &DAG);
-
- SDValue LowerCMP_SWAP(SDValue Op, SelectionDAG &DAG);
- SDValue LowerLOAD_SUB(SDValue Op, SelectionDAG &DAG);
- SDValue LowerREADCYCLECOUNTER(SDValue Op, SelectionDAG &DAG);
+ SelectionDAG &DAG) const;
+ SDValue LowerBITCAST(SDValue op, SelectionDAG &DAG) const;
+ SDValue LowerSINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerUINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerUINT_TO_FP_i64(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerUINT_TO_FP_i32(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFP_TO_SINT(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFP_TO_UINT(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFABS(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFNEG(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFCOPYSIGN(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerToBT(SDValue And, ISD::CondCode CC,
+ DebugLoc dl, SelectionDAG &DAG) const;
+ SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerVSETCC(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerSELECT(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerBRCOND(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerMEMSET(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerVACOPY(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFRAME_TO_ARGS_OFFSET(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerEH_RETURN(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerTRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerCTLZ(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerCTTZ(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerMUL_V2I64(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerSHL(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerXALUO(SDValue Op, SelectionDAG &DAG) const;
+
+ SDValue LowerCMP_SWAP(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerLOAD_SUB(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerREADCYCLECOUNTER(SDValue Op, SelectionDAG &DAG) const;
+ SDValue LowerMEMBARRIER(SDValue Op, SelectionDAG &DAG) const;
+
+ // Utility functions to help LowerVECTOR_SHUFFLE
+ SDValue LowerVECTOR_SHUFFLEv8i16(SDValue Op, SelectionDAG &DAG) const;
virtual SDValue
LowerFormalArguments(SDValue Chain,
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::InputArg> &Ins,
DebugLoc dl, SelectionDAG &DAG,
- SmallVectorImpl<SDValue> &InVals);
+ SmallVectorImpl<SDValue> &InVals) const;
virtual SDValue
LowerCall(SDValue Chain, SDValue Callee,
- CallingConv::ID CallConv, bool isVarArg, bool isTailCall,
+ CallingConv::ID CallConv, bool isVarArg, bool &isTailCall,
const SmallVectorImpl<ISD::OutputArg> &Outs,
+ const SmallVectorImpl<SDValue> &OutVals,
const SmallVectorImpl<ISD::InputArg> &Ins,
DebugLoc dl, SelectionDAG &DAG,
- SmallVectorImpl<SDValue> &InVals);
+ SmallVectorImpl<SDValue> &InVals) const;
virtual SDValue
LowerReturn(SDValue Chain,
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::OutputArg> &Outs,
- DebugLoc dl, SelectionDAG &DAG);
+ const SmallVectorImpl<SDValue> &OutVals,
+ DebugLoc dl, SelectionDAG &DAG) const;
+
+ virtual bool isUsedByReturnOnly(SDNode *N) const;
virtual bool
CanLowerReturn(CallingConv::ID CallConv, bool isVarArg,
- const SmallVectorImpl<EVT> &OutTys,
- const SmallVectorImpl<ISD::ArgFlagsTy> &ArgsFlags,
- SelectionDAG &DAG);
+ const SmallVectorImpl<ISD::OutputArg> &Outs,
+ LLVMContext &Context) const;
void ReplaceATOMIC_BINARY_64(SDNode *N, SmallVectorImpl<SDValue> &Results,
- SelectionDAG &DAG, unsigned NewOp);
-
- SDValue EmitTargetCodeForMemset(SelectionDAG &DAG, DebugLoc dl,
- SDValue Chain,
- SDValue Dst, SDValue Src,
- SDValue Size, unsigned Align,
- const Value *DstSV, uint64_t DstSVOff);
- SDValue EmitTargetCodeForMemcpy(SelectionDAG &DAG, DebugLoc dl,
- SDValue Chain,
- SDValue Dst, SDValue Src,
- SDValue Size, unsigned Align,
- bool AlwaysInline,
- const Value *DstSV, uint64_t DstSVOff,
- const Value *SrcSV, uint64_t SrcSVOff);
-
+ SelectionDAG &DAG, unsigned NewOp) const;
+
/// Utility function to emit string processing sse4.2 instructions
/// that return in xmm0.
/// This takes the instruction to expand, the associated machine basic
/// block, the number of args, and whether or not the second arg is
/// in memory or not.
MachineBasicBlock *EmitPCMP(MachineInstr *BInstr, MachineBasicBlock *BB,
- unsigned argNum, bool inMem) const;
+ unsigned argNum, bool inMem) const;
+
+ /// Utility functions to emit monitor and mwait instructions. These
+ /// need to make sure that the arguments to the intrinsic are in the
+ /// correct registers.
+ MachineBasicBlock *EmitMonitor(MachineInstr *MI,
+ MachineBasicBlock *BB) const;
+ MachineBasicBlock *EmitMwait(MachineInstr *MI, MachineBasicBlock *BB) const;
/// Utility function to emit atomic bitwise operations (and, or, xor).
/// It takes the bitwise instruction to expand, the associated machine basic
unsigned immOpc,
unsigned loadOpc,
unsigned cxchgOpc,
- unsigned copyOpc,
unsigned notOpc,
unsigned EAXreg,
TargetRegisterClass *RC,
unsigned immOpcL,
unsigned immOpcH,
bool invSrc = false) const;
-
+
/// Utility function to emit atomic min and max. It takes the min/max
/// instruction to expand, the associated basic block, and the associated
/// cmov opcode for moving the min or max value.
MachineBasicBlock *BB,
unsigned cmovOpc) const;
+ // Utility function to emit the low-level va_arg code for X86-64.
+ MachineBasicBlock *EmitVAARG64WithCustomInserter(
+ MachineInstr *MI,
+ MachineBasicBlock *MBB) const;
+
/// Utility function to emit the xmm reg save portion of va_start.
MachineBasicBlock *EmitVAStartSaveXMMRegsWithCustomInserter(
MachineInstr *BInstr,
MachineBasicBlock *BB) const;
MachineBasicBlock *EmitLoweredSelect(MachineInstr *I,
- MachineBasicBlock *BB,
- DenseMap<MachineBasicBlock*, MachineBasicBlock*> *EM) const;
-
+ MachineBasicBlock *BB) const;
+
+ MachineBasicBlock *EmitLoweredWinAlloca(MachineInstr *MI,
+ MachineBasicBlock *BB) const;
+
+ MachineBasicBlock *EmitLoweredTLSCall(MachineInstr *MI,
+ MachineBasicBlock *BB) const;
+
+ MachineBasicBlock *emitLoweredTLSAddr(MachineInstr *MI,
+ MachineBasicBlock *BB) const;
+
/// Emit nodes that will be selected as "test Op0,Op0", or something
/// equivalent, for use with the given x86 condition code.
- SDValue EmitTest(SDValue Op0, unsigned X86CC, SelectionDAG &DAG);
+ SDValue EmitTest(SDValue Op0, unsigned X86CC, SelectionDAG &DAG) const;
/// Emit nodes that will be selected as "cmp Op0,Op1", or something
/// equivalent, for use with the given x86 condition code.
SDValue EmitCmp(SDValue Op0, SDValue Op1, unsigned X86CC,
- SelectionDAG &DAG);
+ SelectionDAG &DAG) const;
};
namespace X86 {
- FastISel *createFastISel(MachineFunction &mf,
- MachineModuleInfo *mmi, DwarfWriter *dw,
- DenseMap<const Value *, unsigned> &,
- DenseMap<const BasicBlock *, MachineBasicBlock *> &,
- DenseMap<const AllocaInst *, int> &
-#ifndef NDEBUG
- , SmallSet<Instruction*, 8> &
-#endif
- );
+ FastISel *createFastISel(FunctionLoweringInfo &funcInfo);
}
}