//===- X86InstructionInfo.h - X86 Instruction Information ---------*-C++-*-===//
//
-// This file contains the X86 implementation of the MInstructionInfo class.
+// This file contains the X86 implementation of the TargetInstrInfo class.
//
//===----------------------------------------------------------------------===//
#ifndef X86INSTRUCTIONINFO_H
#define X86INSTRUCTIONINFO_H
-#include "llvm/Target/MachineInstrInfo.h"
+#include "llvm/Target/TargetInstrInfo.h"
#include "X86RegisterInfo.h"
-class X86InstructionInfo : public MachineInstrInfo {
+/// X86II - This namespace holds all of the target specific flags that
+/// instruction info tracks.
+///
+namespace X86II {
+ enum {
+ //===------------------------------------------------------------------===//
+ // Instruction types. These are the standard/most common forms for X86
+ // instructions.
+ //
+
+ // PseudoFrm - This represents an instruction that is a pseudo instruction
+ // or one that has not been implemented yet. It is illegal to code generate
+ // it, but tolerated for intermediate implementation stages.
+ Pseudo = 0,
+
+ /// Raw - This form is for instructions that don't have any operands, so
+ /// they are just a fixed opcode value, like 'leave'.
+ RawFrm = 1,
+
+ /// AddRegFrm - This form is used for instructions like 'push r32' that have
+ /// their one register operand added to their opcode.
+ AddRegFrm = 2,
+
+ /// MRMDestReg - This form is used for instructions that use the Mod/RM byte
+ /// to specify a destination, which in this case is a register.
+ ///
+ MRMDestReg = 3,
+
+ /// MRMDestMem - This form is used for instructions that use the Mod/RM byte
+ /// to specify a destination, which in this case is memory.
+ ///
+ MRMDestMem = 4,
+
+ /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte
+ /// to specify a source, which in this case is a register.
+ ///
+ MRMSrcReg = 5,
+
+ /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte
+ /// to specify a source, which in this case is memory.
+ ///
+ MRMSrcMem = 6,
+
+ /// MRMS[0-7][rm] - These forms are used to represent instructions that use
+ /// a Mod/RM byte, and use the middle field to hold extended opcode
+ /// information. In the intel manual these are represented as /0, /1, ...
+ ///
+
+ // First, instructions that operate on a register r/m operand...
+ MRMS0r = 16, MRMS1r = 17, MRMS2r = 18, MRMS3r = 19, // Format /0 /1 /2 /3
+ MRMS4r = 20, MRMS5r = 21, MRMS6r = 22, MRMS7r = 23, // Format /4 /5 /6 /7
+
+ // Next, instructions that operate on a memory r/m operand...
+ MRMS0m = 24, MRMS1m = 25, MRMS2m = 26, MRMS3m = 27, // Format /0 /1 /2 /3
+ MRMS4m = 28, MRMS5m = 29, MRMS6m = 30, MRMS7m = 31, // Format /4 /5 /6 /7
+
+ FormMask = 31,
+
+ //===------------------------------------------------------------------===//
+ // Actual flags...
+
+ /// Void - Set if this instruction produces no value
+ Void = 1 << 5,
+
+ // OpSize - Set if this instruction requires an operand size prefix (0x66),
+ // which most often indicates that the instruction operates on 16 bit data
+ // instead of 32 bit data.
+ OpSize = 1 << 6,
+
+ // Op0Mask - There are several prefix bytes that are used to form two byte
+ // opcodes. These are currently 0x0F, and 0xD8-0xDF. This mask is used to
+ // obtain the setting of this field. If no bits in this field is set, there
+ // is no prefix byte for obtaining a multibyte opcode.
+ //
+ Op0Mask = 0xF << 7,
+ Op0Shift = 7,
+
+ // TB - TwoByte - Set if this instruction has a two byte opcode, which
+ // starts with a 0x0F byte before the real opcode.
+ TB = 1 << 7,
+
+ // D8-DF - These escape opcodes are used by the floating point unit. These
+ // values must remain sequential.
+ D8 = 2 << 7, D9 = 3 << 7, DA = 4 << 7, DB = 5 << 7,
+ DC = 6 << 7, DD = 7 << 7, DE = 8 << 7, DF = 9 << 7,
+
+ //===------------------------------------------------------------------===//
+ // This three-bit field describes the size of a memory operand. Zero is
+ // unused so that we can tell if we forgot to set a value.
+ Arg8 = 1 << 11,
+ Arg16 = 2 << 11,
+ Arg32 = 3 << 11,
+ Arg64 = 4 << 11, // 64 bit int argument for FILD64
+ ArgF32 = 5 << 11,
+ ArgF64 = 6 << 11,
+ ArgF80 = 7 << 11,
+ ArgMask = 7 << 11,
+
+ //===------------------------------------------------------------------===//
+ // FP Instruction Classification... Zero is non-fp instruction.
+
+ // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0
+ ZeroArgFP = 1 << 14,
+
+ // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst
+ OneArgFP = 2 << 14,
+
+ // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a
+ // result back to ST(0). For example, fcos, fsqrt, etc.
+ //
+ OneArgFPRW = 3 << 14,
+
+ // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an
+ // explicit argument, storing the result to either ST(0) or the implicit
+ // argument. For example: fadd, fsub, fmul, etc...
+ TwoArgFP = 4 << 14,
+
+ // SpecialFP - Special instruction forms. Dispatch by opcode explicitly.
+ SpecialFP = 5 << 14,
+
+ // FPTypeMask - Mask for all of the FP types...
+ FPTypeMask = 7 << 14,
+
+ // Bits 17 -> 31 are unused
+ };
+}
+
+class X86InstrInfo : public TargetInstrInfo {
const X86RegisterInfo RI;
public:
- X86InstructionInfo();
+ X86InstrInfo();
- /// getRegisterInfo - MInstructionInfo is a superset of MRegister info. As
+ /// getRegisterInfo - TargetInstrInfo is a superset of MRegister info. As
/// such, whenever a client has an instance of instruction info, it should
/// always be able to get register info as well (through this method).
///
virtual const MRegisterInfo &getRegisterInfo() const { return RI; }
- /// print - Print out an x86 instruction in GAS syntax
+ /// createNOPinstr - returns the target's implementation of NOP, which is
+ /// usually a pseudo-instruction, implemented by a degenerate version of
+ /// another instruction, e.g. X86: `xchg ax, ax'; SparcV9: `sethi r0, r0, r0'
///
- virtual void print(const MachineInstr *MI, std::ostream &O) const;
+ MachineInstr* createNOPinstr() const;
+ /// isNOPinstr - not having a special NOP opcode, we need to know if a given
+ /// instruction is interpreted as an `official' NOP instr, i.e., there may be
+ /// more than one way to `do nothing' but only one canonical way to slack off.
+ ///
+ bool isNOPinstr(const MachineInstr &MI) const;
- //===--------------------------------------------------------------------===//
- //
- // These are stubs for pure virtual methods that should be factored out of
- // MachineInstrInfo. We never call them, we don't want them, but we need
- // stubs so that we can instatiate our class.
+ /// print - Print out an x86 instruction in intel syntax
+ ///
+ virtual void print(const MachineInstr *MI, std::ostream &O,
+ const TargetMachine &TM) const;
+
+ // getBaseOpcodeFor - This function returns the "base" X86 opcode for the
+ // specified opcode number.
//
- MachineOpCode getNOPOpCode() const { abort(); }
- void CreateCodeToLoadConst(const TargetMachine& target, Function* F,
- Value *V, Instruction *I,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const { abort(); }
- void CreateCodeToCopyIntToFloat(const TargetMachine& target,
- Function* F, Value* val, Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const {
- abort();
- }
- void CreateCodeToCopyFloatToInt(const TargetMachine& target, Function* F,
- Value* val, Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi)const {
- abort();
- }
- void CreateCopyInstructionsByType(const TargetMachine& target,
- Function* F, Value* src,
- Instruction* dest,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi)const {
- abort();
- }
-
- void CreateSignExtensionInstructions(const TargetMachine& target,
- Function* F, Value* srcVal,
- Value* destVal, unsigned numLowBits,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const {
- abort();
- }
-
- void CreateZeroExtensionInstructions(const TargetMachine& target,
- Function* F, Value* srcVal,
- Value* destVal, unsigned srcSizeInBits,
- std::vector<MachineInstr*>& mvec,
- MachineCodeForInstruction& mcfi) const {
- abort();
- }
+ unsigned char getBaseOpcodeFor(unsigned Opcode) const;
};