#include "llvm/Constants.h"
#include "llvm/Instructions.h"
#include "llvm/IntrinsicInst.h"
+#include "llvm/LLVMContext.h"
#include "llvm/Type.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Analysis/Dominators.h"
/// StrengthReduceStridedIVUsers. It contains the stride, the common base, as
/// well as the PHI node and increment value created for rewrite.
struct VISIBILITY_HIDDEN IVExpr {
- SCEVHandle Stride;
- SCEVHandle Base;
+ const SCEV *Stride;
+ const SCEV *Base;
PHINode *PHI;
- IVExpr(const SCEVHandle &stride, const SCEVHandle &base, PHINode *phi)
+ IVExpr(const SCEV *const stride, const SCEV *const base, PHINode *phi)
: Stride(stride), Base(base), PHI(phi) {}
};
struct VISIBILITY_HIDDEN IVsOfOneStride {
std::vector<IVExpr> IVs;
- void addIV(const SCEVHandle &Stride, const SCEVHandle &Base, PHINode *PHI) {
+ void addIV(const SCEV *const Stride, const SCEV *const Base, PHINode *PHI) {
IVs.push_back(IVExpr(Stride, Base, PHI));
}
};
/// IVsByStride - Keep track of all IVs that have been inserted for a
/// particular stride.
- std::map<SCEVHandle, IVsOfOneStride> IVsByStride;
+ std::map<const SCEV *, IVsOfOneStride> IVsByStride;
/// StrideNoReuse - Keep track of all the strides whose ivs cannot be
/// reused (nor should they be rewritten to reuse other strides).
- SmallSet<SCEVHandle, 4> StrideNoReuse;
+ SmallSet<const SCEV *, 4> StrideNoReuse;
/// DeadInsts - Keep track of instructions we may have made dead, so that
/// we can remove them after we are done working.
private:
ICmpInst *ChangeCompareStride(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse,
- const SCEVHandle* &CondStride);
+ const SCEV *const * &CondStride);
void OptimizeIndvars(Loop *L);
void OptimizeLoopCountIV(Loop *L);
IVStrideUse* &CondUse);
bool FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse,
- const SCEVHandle *&CondStride);
+ const SCEV *const * &CondStride);
bool RequiresTypeConversion(const Type *Ty, const Type *NewTy);
- SCEVHandle CheckForIVReuse(bool, bool, bool, const SCEVHandle&,
+ const SCEV *CheckForIVReuse(bool, bool, bool, const SCEV *const&,
IVExpr&, const Type*,
const std::vector<BasedUser>& UsersToProcess);
bool ValidScale(bool, int64_t,
const std::vector<BasedUser>& UsersToProcess);
bool ValidOffset(bool, int64_t, int64_t,
const std::vector<BasedUser>& UsersToProcess);
- SCEVHandle CollectIVUsers(const SCEVHandle &Stride,
+ const SCEV *CollectIVUsers(const SCEV *const &Stride,
IVUsersOfOneStride &Uses,
Loop *L,
bool &AllUsesAreAddresses,
const std::vector<BasedUser> &UsersToProcess,
const Loop *L,
bool AllUsesAreAddresses,
- SCEVHandle Stride);
+ const SCEV *Stride);
void PrepareToStrengthReduceFully(
std::vector<BasedUser> &UsersToProcess,
- SCEVHandle Stride,
- SCEVHandle CommonExprs,
+ const SCEV *Stride,
+ const SCEV *CommonExprs,
const Loop *L,
SCEVExpander &PreheaderRewriter);
void PrepareToStrengthReduceFromSmallerStride(
Instruction *PreInsertPt);
void PrepareToStrengthReduceWithNewPhi(
std::vector<BasedUser> &UsersToProcess,
- SCEVHandle Stride,
- SCEVHandle CommonExprs,
+ const SCEV *Stride,
+ const SCEV *CommonExprs,
Value *CommonBaseV,
Instruction *IVIncInsertPt,
const Loop *L,
SCEVExpander &PreheaderRewriter);
- void StrengthReduceStridedIVUsers(const SCEVHandle &Stride,
+ void StrengthReduceStridedIVUsers(const SCEV *const &Stride,
IVUsersOfOneStride &Uses,
Loop *L);
void DeleteTriviallyDeadInstructions();
/// containsAddRecFromDifferentLoop - Determine whether expression S involves a
/// subexpression that is an AddRec from a loop other than L. An outer loop
/// of L is OK, but not an inner loop nor a disjoint loop.
-static bool containsAddRecFromDifferentLoop(SCEVHandle S, Loop *L) {
+static bool containsAddRecFromDifferentLoop(const SCEV *S, Loop *L) {
// This is very common, put it first.
if (isa<SCEVConstant>(S))
return false;
if (newLoop == L)
return false;
// if newLoop is an outer loop of L, this is OK.
- if (!LoopInfoBase<BasicBlock>::isNotAlreadyContainedIn(L, newLoop))
+ if (!LoopInfo::isNotAlreadyContainedIn(L, newLoop))
return false;
}
return true;
/// this use. As the use is processed, information gets moved from this
/// field to the Imm field (below). BasedUser values are sorted by this
/// field.
- SCEVHandle Base;
+ const SCEV *Base;
/// Inst - The instruction using the induction variable.
Instruction *Inst;
/// before Inst, because it will be folded into the imm field of the
/// instruction. This is also sometimes used for loop-variant values that
/// must be added inside the loop.
- SCEVHandle Imm;
+ const SCEV *Imm;
/// Phi - The induction variable that performs the striding that
/// should be used for this user.
// Once we rewrite the code to insert the new IVs we want, update the
// operands of Inst to use the new expression 'NewBase', with 'Imm' added
// to it.
- void RewriteInstructionToUseNewBase(const SCEVHandle &NewBase,
+ void RewriteInstructionToUseNewBase(const SCEV *const &NewBase,
Instruction *InsertPt,
SCEVExpander &Rewriter, Loop *L, Pass *P,
LoopInfo &LI,
SmallVectorImpl<WeakVH> &DeadInsts);
- Value *InsertCodeForBaseAtPosition(const SCEVHandle &NewBase,
+ Value *InsertCodeForBaseAtPosition(const SCEV *const &NewBase,
const Type *Ty,
SCEVExpander &Rewriter,
Instruction *IP, Loop *L,
cerr << " Inst: " << *Inst;
}
-Value *BasedUser::InsertCodeForBaseAtPosition(const SCEVHandle &NewBase,
+Value *BasedUser::InsertCodeForBaseAtPosition(const SCEV *const &NewBase,
const Type *Ty,
SCEVExpander &Rewriter,
Instruction *IP, Loop *L,
Value *Base = Rewriter.expandCodeFor(NewBase, 0, BaseInsertPt);
- SCEVHandle NewValSCEV = SE->getUnknown(Base);
+ const SCEV *NewValSCEV = SE->getUnknown(Base);
- // If there is no immediate value, skip the next part.
- if (!Imm->isZero()) {
- // If we are inserting the base and imm values in the same block, make sure
- // to adjust the IP position if insertion reused a result.
- if (IP == BaseInsertPt)
- IP = Rewriter.getInsertionPoint();
-
- // Always emit the immediate (if non-zero) into the same block as the user.
- NewValSCEV = SE->getAddExpr(NewValSCEV, Imm);
- }
+ // Always emit the immediate into the same block as the user.
+ NewValSCEV = SE->getAddExpr(NewValSCEV, Imm);
return Rewriter.expandCodeFor(NewValSCEV, Ty, IP);
}
// value of NewBase in the case that it's a diffferent instruction from
// the PHI that NewBase is computed from, or null otherwise.
//
-void BasedUser::RewriteInstructionToUseNewBase(const SCEVHandle &NewBase,
+void BasedUser::RewriteInstructionToUseNewBase(const SCEV *const &NewBase,
Instruction *NewBasePt,
SCEVExpander &Rewriter, Loop *L, Pass *P,
LoopInfo &LI,
/// fitsInAddressMode - Return true if V can be subsumed within an addressing
/// mode, and does not need to be put in a register first.
-static bool fitsInAddressMode(const SCEVHandle &V, const Type *AccessTy,
+static bool fitsInAddressMode(const SCEV *const &V, const Type *AccessTy,
const TargetLowering *TLI, bool HasBaseReg) {
if (const SCEVConstant *SC = dyn_cast<SCEVConstant>(V)) {
int64_t VC = SC->getValue()->getSExtValue();
/// MoveLoopVariantsToImmediateField - Move any subexpressions from Val that are
/// loop varying to the Imm operand.
-static void MoveLoopVariantsToImmediateField(SCEVHandle &Val, SCEVHandle &Imm,
+static void MoveLoopVariantsToImmediateField(const SCEV *&Val, const SCEV *&Imm,
Loop *L, ScalarEvolution *SE) {
if (Val->isLoopInvariant(L)) return; // Nothing to do.
if (const SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) {
- SmallVector<SCEVHandle, 4> NewOps;
+ SmallVector<const SCEV *, 4> NewOps;
NewOps.reserve(SAE->getNumOperands());
for (unsigned i = 0; i != SAE->getNumOperands(); ++i)
Val = SE->getAddExpr(NewOps);
} else if (const SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) {
// Try to pull immediates out of the start value of nested addrec's.
- SCEVHandle Start = SARE->getStart();
+ const SCEV *Start = SARE->getStart();
MoveLoopVariantsToImmediateField(Start, Imm, L, SE);
- SmallVector<SCEVHandle, 4> Ops(SARE->op_begin(), SARE->op_end());
+ SmallVector<const SCEV *, 4> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Start;
Val = SE->getAddRecExpr(Ops, SARE->getLoop());
} else {
/// Accumulate these immediate values into the Imm value.
static void MoveImmediateValues(const TargetLowering *TLI,
const Type *AccessTy,
- SCEVHandle &Val, SCEVHandle &Imm,
+ const SCEV *&Val, const SCEV *&Imm,
bool isAddress, Loop *L,
ScalarEvolution *SE) {
if (const SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) {
- SmallVector<SCEVHandle, 4> NewOps;
+ SmallVector<const SCEV *, 4> NewOps;
NewOps.reserve(SAE->getNumOperands());
for (unsigned i = 0; i != SAE->getNumOperands(); ++i) {
- SCEVHandle NewOp = SAE->getOperand(i);
+ const SCEV *NewOp = SAE->getOperand(i);
MoveImmediateValues(TLI, AccessTy, NewOp, Imm, isAddress, L, SE);
if (!NewOp->isLoopInvariant(L)) {
return;
} else if (const SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) {
// Try to pull immediates out of the start value of nested addrec's.
- SCEVHandle Start = SARE->getStart();
+ const SCEV *Start = SARE->getStart();
MoveImmediateValues(TLI, AccessTy, Start, Imm, isAddress, L, SE);
if (Start != SARE->getStart()) {
- SmallVector<SCEVHandle, 4> Ops(SARE->op_begin(), SARE->op_end());
+ SmallVector<const SCEV *, 4> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Start;
Val = SE->getAddRecExpr(Ops, SARE->getLoop());
}
fitsInAddressMode(SME->getOperand(0), AccessTy, TLI, false) &&
SME->getNumOperands() == 2 && SME->isLoopInvariant(L)) {
- SCEVHandle SubImm = SE->getIntegerSCEV(0, Val->getType());
- SCEVHandle NewOp = SME->getOperand(1);
+ const SCEV *SubImm = SE->getIntegerSCEV(0, Val->getType());
+ const SCEV *NewOp = SME->getOperand(1);
MoveImmediateValues(TLI, AccessTy, NewOp, SubImm, isAddress, L, SE);
// If we extracted something out of the subexpressions, see if we can
static void MoveImmediateValues(const TargetLowering *TLI,
Instruction *User,
- SCEVHandle &Val, SCEVHandle &Imm,
+ const SCEV *&Val, const SCEV *&Imm,
bool isAddress, Loop *L,
ScalarEvolution *SE) {
const Type *AccessTy = getAccessType(User);
/// SeparateSubExprs - Decompose Expr into all of the subexpressions that are
/// added together. This is used to reassociate common addition subexprs
/// together for maximal sharing when rewriting bases.
-static void SeparateSubExprs(SmallVector<SCEVHandle, 16> &SubExprs,
- SCEVHandle Expr,
+static void SeparateSubExprs(SmallVector<const SCEV *, 16> &SubExprs,
+ const SCEV *Expr,
ScalarEvolution *SE) {
if (const SCEVAddExpr *AE = dyn_cast<SCEVAddExpr>(Expr)) {
for (unsigned j = 0, e = AE->getNumOperands(); j != e; ++j)
SeparateSubExprs(SubExprs, AE->getOperand(j), SE);
} else if (const SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Expr)) {
- SCEVHandle Zero = SE->getIntegerSCEV(0, Expr->getType());
+ const SCEV *Zero = SE->getIntegerSCEV(0, Expr->getType());
if (SARE->getOperand(0) == Zero) {
SubExprs.push_back(Expr);
} else {
// Compute the addrec with zero as its base.
- SmallVector<SCEVHandle, 4> Ops(SARE->op_begin(), SARE->op_end());
+ SmallVector<const SCEV *, 4> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Zero; // Start with zero base.
SubExprs.push_back(SE->getAddRecExpr(Ops, SARE->getLoop()));
/// not remove anything. This looks for things like (a+b+c) and
/// (a+c+d) and computes the common (a+c) subexpression. The common expression
/// is *removed* from the Bases and returned.
-static SCEVHandle
+static const SCEV *
RemoveCommonExpressionsFromUseBases(std::vector<BasedUser> &Uses,
ScalarEvolution *SE, Loop *L,
const TargetLowering *TLI) {
// Only one use? This is a very common case, so we handle it specially and
// cheaply.
- SCEVHandle Zero = SE->getIntegerSCEV(0, Uses[0].Base->getType());
- SCEVHandle Result = Zero;
- SCEVHandle FreeResult = Zero;
+ const SCEV *Zero = SE->getIntegerSCEV(0, Uses[0].Base->getType());
+ const SCEV *Result = Zero;
+ const SCEV *FreeResult = Zero;
if (NumUses == 1) {
// If the use is inside the loop, use its base, regardless of what it is:
// it is clearly shared across all the IV's. If the use is outside the loop
// Also track whether all uses of each expression can be moved into an
// an addressing mode "for free"; such expressions are left within the loop.
// struct SubExprUseData { unsigned Count; bool notAllUsesAreFree; };
- std::map<SCEVHandle, SubExprUseData> SubExpressionUseData;
+ std::map<const SCEV *, SubExprUseData> SubExpressionUseData;
// UniqueSubExprs - Keep track of all of the subexpressions we see in the
// order we see them.
- SmallVector<SCEVHandle, 16> UniqueSubExprs;
+ SmallVector<const SCEV *, 16> UniqueSubExprs;
- SmallVector<SCEVHandle, 16> SubExprs;
+ SmallVector<const SCEV *, 16> SubExprs;
unsigned NumUsesInsideLoop = 0;
for (unsigned i = 0; i != NumUses; ++i) {
// If the user is outside the loop, just ignore it for base computation.
// Now that we know how many times each is used, build Result. Iterate over
// UniqueSubexprs so that we have a stable ordering.
for (unsigned i = 0, e = UniqueSubExprs.size(); i != e; ++i) {
- std::map<SCEVHandle, SubExprUseData>::iterator I =
+ std::map<const SCEV *, SubExprUseData>::iterator I =
SubExpressionUseData.find(UniqueSubExprs[i]);
assert(I != SubExpressionUseData.end() && "Entry not found?");
if (I->second.Count == NumUsesInsideLoop) { // Found CSE!
if (FreeResult != Zero) {
SeparateSubExprs(SubExprs, FreeResult, SE);
for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) {
- std::map<SCEVHandle, SubExprUseData>::iterator I =
+ std::map<const SCEV *, SubExprUseData>::iterator I =
SubExpressionUseData.find(SubExprs[j]);
SubExpressionUseData.erase(I);
}
/// be folded into the addressing mode, nor even that the factor be constant;
/// a multiply (executed once) outside the loop is better than another IV
/// within. Well, usually.
-SCEVHandle LoopStrengthReduce::CheckForIVReuse(bool HasBaseReg,
+const SCEV *LoopStrengthReduce::CheckForIVReuse(bool HasBaseReg,
bool AllUsesAreAddresses,
bool AllUsesAreOutsideLoop,
- const SCEVHandle &Stride,
+ const SCEV *const &Stride,
IVExpr &IV, const Type *Ty,
const std::vector<BasedUser>& UsersToProcess) {
if (StrideNoReuse.count(Stride))
int64_t SInt = SC->getValue()->getSExtValue();
for (unsigned NewStride = 0, e = IU->StrideOrder.size();
NewStride != e; ++NewStride) {
- std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
+ std::map<const SCEV *, IVsOfOneStride>::iterator SI =
IVsByStride.find(IU->StrideOrder[NewStride]);
if (SI == IVsByStride.end() || !isa<SCEVConstant>(SI->first) ||
StrideNoReuse.count(SI->first))
// an existing IV if we can.
for (unsigned NewStride = 0, e = IU->StrideOrder.size();
NewStride != e; ++NewStride) {
- std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
+ std::map<const SCEV *, IVsOfOneStride>::iterator SI =
IVsByStride.find(IU->StrideOrder[NewStride]);
if (SI == IVsByStride.end() || !isa<SCEVConstant>(SI->first))
continue;
// -1*old.
for (unsigned NewStride = 0, e = IU->StrideOrder.size();
NewStride != e; ++NewStride) {
- std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
+ std::map<const SCEV *, IVsOfOneStride>::iterator SI =
IVsByStride.find(IU->StrideOrder[NewStride]);
if (SI == IVsByStride.end())
continue;
/// isNonConstantNegative - Return true if the specified scev is negated, but
/// not a constant.
-static bool isNonConstantNegative(const SCEVHandle &Expr) {
+static bool isNonConstantNegative(const SCEV *const &Expr) {
const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(Expr);
if (!Mul) return false;
/// of the strided accesses, as well as the old information from Uses. We
/// progressively move information from the Base field to the Imm field, until
/// we eventually have the full access expression to rewrite the use.
-SCEVHandle LoopStrengthReduce::CollectIVUsers(const SCEVHandle &Stride,
+const SCEV *LoopStrengthReduce::CollectIVUsers(const SCEV *const &Stride,
IVUsersOfOneStride &Uses,
Loop *L,
bool &AllUsesAreAddresses,
// for the strides (e.g. if we have "A+C+B" and "A+B+D" as our bases, find
// "A+B"), emit it to the preheader, then remove the expression from the
// UsersToProcess base values.
- SCEVHandle CommonExprs =
+ const SCEV *CommonExprs =
RemoveCommonExpressionsFromUseBases(UsersToProcess, SE, L, TLI);
// Next, figure out what we can represent in the immediate fields of
const std::vector<BasedUser> &UsersToProcess,
const Loop *L,
bool AllUsesAreAddresses,
- SCEVHandle Stride) {
+ const SCEV *Stride) {
if (!EnableFullLSRMode)
return false;
if (!Imm) Imm = SE->getIntegerSCEV(0, Stride->getType());
const Instruction *Inst = UsersToProcess[i].Inst;
const Type *AccessTy = getAccessType(Inst);
- SCEVHandle Diff = SE->getMinusSCEV(UsersToProcess[i].Imm, Imm);
+ const SCEV *Diff = SE->getMinusSCEV(UsersToProcess[i].Imm, Imm);
if (!Diff->isZero() &&
(!AllUsesAreAddresses ||
!fitsInAddressMode(Diff, AccessTy, TLI, /*HasBaseReg=*/true)))
///
/// Return the created phi node.
///
-static PHINode *InsertAffinePhi(SCEVHandle Start, SCEVHandle Step,
+static PHINode *InsertAffinePhi(const SCEV *Start, const SCEV *Step,
Instruction *IVIncInsertPt,
const Loop *L,
SCEVExpander &Rewriter) {
// If the stride is negative, insert a sub instead of an add for the
// increment.
bool isNegative = isNonConstantNegative(Step);
- SCEVHandle IncAmount = Step;
+ const SCEV *IncAmount = Step;
if (isNegative)
IncAmount = Rewriter.SE.getNegativeSCEV(Step);
// loop before users outside of the loop with a particular base.
//
// We would like to use stable_sort here, but we can't. The problem is that
- // SCEVHandle's don't have a deterministic ordering w.r.t to each other, so
+ // const SCEV *'s don't have a deterministic ordering w.r.t to each other, so
// we don't have anything to do a '<' comparison on. Because we think the
// number of uses is small, do a horrible bubble sort which just relies on
// ==.
for (unsigned i = 0, e = UsersToProcess.size(); i != e; ++i) {
// Get a base value.
- SCEVHandle Base = UsersToProcess[i].Base;
+ const SCEV *Base = UsersToProcess[i].Base;
// Compact everything with this base to be consecutive with this one.
for (unsigned j = i+1; j != e; ++j) {
void
LoopStrengthReduce::PrepareToStrengthReduceFully(
std::vector<BasedUser> &UsersToProcess,
- SCEVHandle Stride,
- SCEVHandle CommonExprs,
+ const SCEV *Stride,
+ const SCEV *CommonExprs,
const Loop *L,
SCEVExpander &PreheaderRewriter) {
DOUT << " Fully reducing all users\n";
// TODO: The uses are grouped by base, but not sorted. We arbitrarily
// pick the first Imm value here to start with, and adjust it for the
// other uses.
- SCEVHandle Imm = UsersToProcess[i].Imm;
- SCEVHandle Base = UsersToProcess[i].Base;
- SCEVHandle Start = SE->getAddExpr(CommonExprs, Base, Imm);
+ const SCEV *Imm = UsersToProcess[i].Imm;
+ const SCEV *Base = UsersToProcess[i].Base;
+ const SCEV *Start = SE->getAddExpr(CommonExprs, Base, Imm);
PHINode *Phi = InsertAffinePhi(Start, Stride, IVIncInsertPt, L,
PreheaderRewriter);
// Loop over all the users with the same base.
void
LoopStrengthReduce::PrepareToStrengthReduceWithNewPhi(
std::vector<BasedUser> &UsersToProcess,
- SCEVHandle Stride,
- SCEVHandle CommonExprs,
+ const SCEV *Stride,
+ const SCEV *CommonExprs,
Value *CommonBaseV,
Instruction *IVIncInsertPt,
const Loop *L,
/// StrengthReduceStridedIVUsers - Strength reduce all of the users of a single
/// stride of IV. All of the users may have different starting values, and this
/// may not be the only stride.
-void LoopStrengthReduce::StrengthReduceStridedIVUsers(const SCEVHandle &Stride,
+void LoopStrengthReduce::StrengthReduceStridedIVUsers(const SCEV *const &Stride,
IVUsersOfOneStride &Uses,
Loop *L) {
// If all the users are moved to another stride, then there is nothing to do.
// move information from the Base field to the Imm field, until we eventually
// have the full access expression to rewrite the use.
std::vector<BasedUser> UsersToProcess;
- SCEVHandle CommonExprs = CollectIVUsers(Stride, Uses, L, AllUsesAreAddresses,
+ const SCEV *CommonExprs = CollectIVUsers(Stride, Uses, L, AllUsesAreAddresses,
AllUsesAreOutsideLoop,
UsersToProcess);
// If all uses are addresses, consider sinking the immediate part of the
// common expression back into uses if they can fit in the immediate fields.
if (TLI && HaveCommonExprs && AllUsesAreAddresses) {
- SCEVHandle NewCommon = CommonExprs;
- SCEVHandle Imm = SE->getIntegerSCEV(0, ReplacedTy);
+ const SCEV *NewCommon = CommonExprs;
+ const SCEV *Imm = SE->getIntegerSCEV(0, ReplacedTy);
MoveImmediateValues(TLI, Type::VoidTy, NewCommon, Imm, true, L, SE);
if (!Imm->isZero()) {
bool DoSink = true;
BasicBlock *LatchBlock = L->getLoopLatch();
Instruction *IVIncInsertPt = LatchBlock->getTerminator();
- Value *CommonBaseV = Constant::getNullValue(ReplacedTy);
+ LLVMContext &Context = Preheader->getContext();
+
+ Value *CommonBaseV = Context.getNullValue(ReplacedTy);
- SCEVHandle RewriteFactor = SE->getIntegerSCEV(0, ReplacedTy);
+ const SCEV *RewriteFactor = SE->getIntegerSCEV(0, ReplacedTy);
IVExpr ReuseIV(SE->getIntegerSCEV(0, Type::Int32Ty),
SE->getIntegerSCEV(0, Type::Int32Ty),
0);
// strength-reduced forms. This outer loop handles all bases, the inner
// loop handles all users of a particular base.
while (!UsersToProcess.empty()) {
- SCEVHandle Base = UsersToProcess.back().Base;
+ const SCEV *Base = UsersToProcess.back().Base;
Instruction *Inst = UsersToProcess.back().Inst;
// Emit the code for Base into the preheader.
// the preheader, instead of being forward substituted into the uses. We
// do this by forcing a BitCast (noop cast) to be inserted into the
// preheader in this case.
- if (!fitsInAddressMode(Base, getAccessType(Inst), TLI, false)) {
+ if (!fitsInAddressMode(Base, getAccessType(Inst), TLI, false) &&
+ !isa<Instruction>(BaseV)) {
// We want this constant emitted into the preheader! This is just
// using cast as a copy so BitCast (no-op cast) is appropriate
BaseV = new BitCastInst(BaseV, BaseV->getType(), "preheaderinsert",
User.Inst->moveBefore(IVIncInsertPt);
}
- SCEVHandle RewriteExpr = SE->getUnknown(RewriteOp);
+ const SCEV *RewriteExpr = SE->getUnknown(RewriteOp);
if (SE->getEffectiveSCEVType(RewriteOp->getType()) !=
SE->getEffectiveSCEVType(ReplacedTy)) {
// The base has been used to initialize the PHI node but we don't want
// it here.
if (!ReuseIV.Base->isZero()) {
- SCEVHandle typedBase = ReuseIV.Base;
+ const SCEV *typedBase = ReuseIV.Base;
if (SE->getEffectiveSCEVType(RewriteExpr->getType()) !=
SE->getEffectiveSCEVType(ReuseIV.Base->getType())) {
// It's possible the original IV is a larger type than the new IV,
/// set the IV user and stride information and return true, otherwise return
/// false.
bool LoopStrengthReduce::FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse,
- const SCEVHandle *&CondStride) {
+ const SCEV *const * &CondStride) {
for (unsigned Stride = 0, e = IU->StrideOrder.size();
Stride != e && !CondUse; ++Stride) {
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator SI =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
IU->IVUsesByStride.find(IU->StrideOrder[Stride]);
assert(SI != IU->IVUsesByStride.end() && "Stride doesn't exist!");
const ScalarEvolution *SE;
explicit StrideCompare(const ScalarEvolution *se) : SE(se) {}
- bool operator()(const SCEVHandle &LHS, const SCEVHandle &RHS) {
+ bool operator()(const SCEV *const &LHS, const SCEV *const &RHS) {
const SCEVConstant *LHSC = dyn_cast<SCEVConstant>(LHS);
const SCEVConstant *RHSC = dyn_cast<SCEVConstant>(RHS);
if (LHSC && RHSC) {
/// if (v1 < 30) goto loop
ICmpInst *LoopStrengthReduce::ChangeCompareStride(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse,
- const SCEVHandle* &CondStride) {
+ const SCEV *const* &CondStride) {
// If there's only one stride in the loop, there's nothing to do here.
if (IU->StrideOrder.size() < 2)
return Cond;
// If there are other users of the condition's stride, don't bother
// trying to change the condition because the stride will still
// remain.
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator I =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator I =
IU->IVUsesByStride.find(*CondStride);
if (I == IU->IVUsesByStride.end() ||
I->second->Users.size() != 1)
const SCEVConstant *SC = dyn_cast<SCEVConstant>(*CondStride);
if (!SC) return Cond;
+ LLVMContext &Context = Cond->getContext();
+
ICmpInst::Predicate Predicate = Cond->getPredicate();
int64_t CmpSSInt = SC->getValue()->getSExtValue();
unsigned BitWidth = SE->getTypeSizeInBits((*CondStride)->getType());
const Type *NewCmpTy = NULL;
unsigned TyBits = SE->getTypeSizeInBits(CmpTy);
unsigned NewTyBits = 0;
- SCEVHandle *NewStride = NULL;
+ const SCEV **NewStride = NULL;
Value *NewCmpLHS = NULL;
Value *NewCmpRHS = NULL;
int64_t Scale = 1;
- SCEVHandle NewOffset = SE->getIntegerSCEV(0, CmpTy);
+ const SCEV *NewOffset = SE->getIntegerSCEV(0, CmpTy);
if (ConstantInt *C = dyn_cast<ConstantInt>(Cond->getOperand(1))) {
int64_t CmpVal = C->getValue().getSExtValue();
// Look for a suitable stride / iv as replacement.
for (unsigned i = 0, e = IU->StrideOrder.size(); i != e; ++i) {
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator SI =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
IU->IVUsesByStride.find(IU->StrideOrder[i]);
if (!isa<SCEVConstant>(SI->first))
continue;
NewCmpTy = NewCmpLHS->getType();
NewTyBits = SE->getTypeSizeInBits(NewCmpTy);
- const Type *NewCmpIntTy = IntegerType::get(NewTyBits);
+ const Type *NewCmpIntTy = Context.getIntegerType(NewTyBits);
if (RequiresTypeConversion(NewCmpTy, CmpTy)) {
// Check if it is possible to rewrite it using
// an iv / stride of a smaller integer type.
bool AllUsesAreAddresses = true;
bool AllUsesAreOutsideLoop = true;
std::vector<BasedUser> UsersToProcess;
- SCEVHandle CommonExprs = CollectIVUsers(SI->first, *SI->second, L,
+ const SCEV *CommonExprs = CollectIVUsers(SI->first, *SI->second, L,
AllUsesAreAddresses,
AllUsesAreOutsideLoop,
UsersToProcess);
NewCmpRHS = ConstantInt::get(NewCmpTy, NewCmpVal);
else {
Constant *CI = ConstantInt::get(NewCmpIntTy, NewCmpVal);
- NewCmpRHS = ConstantExpr::getIntToPtr(CI, NewCmpTy);
+ NewCmpRHS = Context.getConstantExprIntToPtr(CI, NewCmpTy);
}
NewOffset = TyBits == NewTyBits
? SE->getMulExpr(CondUse->getOffset(),
// Create a new compare instruction using new stride / iv.
ICmpInst *OldCond = Cond;
// Insert new compare instruction.
- Cond = new ICmpInst(Predicate, NewCmpLHS, NewCmpRHS,
- L->getHeader()->getName() + ".termcond",
- OldCond);
+ Cond = new ICmpInst(OldCond, Predicate, NewCmpLHS, NewCmpRHS,
+ L->getHeader()->getName() + ".termcond");
// Remove the old compare instruction. The old indvar is probably dead too.
DeadInsts.push_back(CondUse->getOperandValToReplace());
SelectInst *Sel = dyn_cast<SelectInst>(Cond->getOperand(1));
if (!Sel || !Sel->hasOneUse()) return Cond;
- SCEVHandle BackedgeTakenCount = SE->getBackedgeTakenCount(L);
+ const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
if (isa<SCEVCouldNotCompute>(BackedgeTakenCount))
return Cond;
- SCEVHandle One = SE->getIntegerSCEV(1, BackedgeTakenCount->getType());
+ const SCEV *One = SE->getIntegerSCEV(1, BackedgeTakenCount->getType());
// Add one to the backedge-taken count to get the trip count.
- SCEVHandle IterationCount = SE->getAddExpr(BackedgeTakenCount, One);
+ const SCEV *IterationCount = SE->getAddExpr(BackedgeTakenCount, One);
// Check for a max calculation that matches the pattern.
if (!isa<SCEVSMaxExpr>(IterationCount) && !isa<SCEVUMaxExpr>(IterationCount))
const SCEVNAryExpr *Max = cast<SCEVNAryExpr>(IterationCount);
if (Max != SE->getSCEV(Sel)) return Cond;
- // Two handle a max with more than two operands, this optimization would
+ // To handle a max with more than two operands, this optimization would
// require additional checking and setup.
if (Max->getNumOperands() != 2)
return Cond;
- SCEVHandle MaxLHS = Max->getOperand(0);
- SCEVHandle MaxRHS = Max->getOperand(1);
+ const SCEV *MaxLHS = Max->getOperand(0);
+ const SCEV *MaxRHS = Max->getOperand(1);
if (!MaxLHS || MaxLHS != One) return Cond;
// Check the relevant induction variable for conformance to
// the pattern.
- SCEVHandle IV = SE->getSCEV(Cond->getOperand(0));
+ const SCEV *IV = SE->getSCEV(Cond->getOperand(0));
const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(IV);
if (!AR || !AR->isAffine() ||
AR->getStart() != One ||
// Ok, everything looks ok to change the condition into an SLT or SGE and
// delete the max calculation.
ICmpInst *NewCond =
- new ICmpInst(Pred, Cond->getOperand(0), NewRHS, "scmp", Cond);
+ new ICmpInst(Cond, Pred, Cond->getOperand(0), NewRHS, "scmp");
// Delete the max calculation instructions.
Cond->replaceAllUsesWith(NewCond);
/// inside the loop then try to eliminate the cast opeation.
void LoopStrengthReduce::OptimizeShadowIV(Loop *L) {
- SCEVHandle BackedgeTakenCount = SE->getBackedgeTakenCount(L);
+ const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
if (isa<SCEVCouldNotCompute>(BackedgeTakenCount))
return;
+
+ LLVMContext &Context = L->getHeader()->getContext();
for (unsigned Stride = 0, e = IU->StrideOrder.size(); Stride != e;
++Stride) {
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator SI =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
IU->IVUsesByStride.find(IU->StrideOrder[Stride]);
assert(SI != IU->IVUsesByStride.end() && "Stride doesn't exist!");
if (!isa<SCEVConstant>(SI->first))
ConstantInt *Init = dyn_cast<ConstantInt>(PH->getIncomingValue(Entry));
if (!Init) continue;
- Constant *NewInit = ConstantFP::get(DestTy, Init->getZExtValue());
+ Constant *NewInit = Context.getConstantFP(DestTy, Init->getZExtValue());
BinaryOperator *Incr =
dyn_cast<BinaryOperator>(PH->getIncomingValue(Latch));
PHINode *NewPH = PHINode::Create(DestTy, "IV.S.", PH);
/* create new increment. '++d' in above example. */
- Constant *CFP = ConstantFP::get(DestTy, C->getZExtValue());
+ Constant *CFP = Context.getConstantFP(DestTy, C->getZExtValue());
BinaryOperator *NewIncr =
BinaryOperator::Create(Incr->getOpcode() == Instruction::Add ?
Instruction::FAdd : Instruction::FSub,
// induction variable, to allow coalescing the live ranges for the IV into
// one register value.
BasicBlock *LatchBlock = L->getLoopLatch();
- BasicBlock *ExitBlock = L->getExitingBlock();
- if (!ExitBlock)
+ BasicBlock *ExitingBlock = L->getExitingBlock();
+ LLVMContext &Context = LatchBlock->getContext();
+
+ if (!ExitingBlock)
// Multiple exits, just look at the exit in the latch block if there is one.
- ExitBlock = LatchBlock;
- BranchInst *TermBr = dyn_cast<BranchInst>(ExitBlock->getTerminator());
+ ExitingBlock = LatchBlock;
+ BranchInst *TermBr = dyn_cast<BranchInst>(ExitingBlock->getTerminator());
if (!TermBr)
return;
if (TermBr->isUnconditional() || !isa<ICmpInst>(TermBr->getCondition()))
// Search IVUsesByStride to find Cond's IVUse if there is one.
IVStrideUse *CondUse = 0;
- const SCEVHandle *CondStride = 0;
+ const SCEV *const *CondStride = 0;
ICmpInst *Cond = cast<ICmpInst>(TermBr->getCondition());
if (!FindIVUserForCond(Cond, CondUse, CondStride))
return; // setcc doesn't use the IV.
- if (ExitBlock != LatchBlock) {
+ if (ExitingBlock != LatchBlock) {
if (!Cond->hasOneUse())
// See below, we don't want the condition to be cloned.
return;
int64_t SInt = SC->getValue()->getSExtValue();
for (unsigned NewStride = 0, ee = IU->StrideOrder.size(); NewStride != ee;
++NewStride) {
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator SI =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
IU->IVUsesByStride.find(IU->StrideOrder[NewStride]);
if (!isa<SCEVConstant>(SI->first) || SI->first == *CondStride)
continue;
bool AllUsesAreAddresses = true;
bool AllUsesAreOutsideLoop = true;
std::vector<BasedUser> UsersToProcess;
- SCEVHandle CommonExprs = CollectIVUsers(SI->first, *SI->second, L,
+ const SCEV *CommonExprs = CollectIVUsers(SI->first, *SI->second, L,
AllUsesAreAddresses,
AllUsesAreOutsideLoop,
UsersToProcess);
// If possible, change stride and operands of the compare instruction to
// eliminate one stride.
- if (ExitBlock == LatchBlock)
+ if (ExitingBlock == LatchBlock)
Cond = ChangeCompareStride(L, Cond, CondUse, CondStride);
// It's possible for the setcc instruction to be anywhere in the loop, and
Cond->moveBefore(TermBr);
} else {
// Otherwise, clone the terminating condition and insert into the loopend.
- Cond = cast<ICmpInst>(Cond->clone());
+ Cond = cast<ICmpInst>(Cond->clone(Context));
Cond->setName(L->getHeader()->getName() + ".termcond");
LatchBlock->getInstList().insert(TermBr, Cond);
void LoopStrengthReduce::OptimizeLoopCountIV(Loop *L) {
// If the number of times the loop is executed isn't computable, give up.
- SCEVHandle BackedgeTakenCount = SE->getBackedgeTakenCount(L);
+ const SCEV *BackedgeTakenCount = SE->getBackedgeTakenCount(L);
if (isa<SCEVCouldNotCompute>(BackedgeTakenCount))
return;
// Handle only tests for equality for the moment, and only stride 1.
if (Cond->getPredicate() != CmpInst::ICMP_EQ)
return;
- SCEVHandle IV = SE->getSCEV(Cond->getOperand(0));
+ const SCEV *IV = SE->getSCEV(Cond->getOperand(0));
const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(IV);
- SCEVHandle One = SE->getIntegerSCEV(1, BackedgeTakenCount->getType());
+ const SCEV *One = SE->getIntegerSCEV(1, BackedgeTakenCount->getType());
if (!AR || !AR->isAffine() || AR->getStepRecurrence(*SE) != One)
return;
// If the RHS of the comparison is defined inside the loop, the rewrite
// strides deterministic - not dependent on map order.
for (unsigned Stride = 0, e = IU->StrideOrder.size();
Stride != e; ++Stride) {
- std::map<SCEVHandle, IVUsersOfOneStride *>::iterator SI =
+ std::map<const SCEV *, IVUsersOfOneStride *>::iterator SI =
IU->IVUsesByStride.find(IU->StrideOrder[Stride]);
assert(SI != IU->IVUsesByStride.end() && "Stride doesn't exist!");
// FIXME: Generalize to non-affine IV's.
projects / oota-llvm.git / blobdiff