//===----------------------------------------------------------------------===//
//
// This pass reassociates commutative expressions in an order that is designed
-// to promote better constant propagation, GCSE, LICM, PRE...
+// to promote better constant propagation, GCSE, LICM, PRE, etc.
//
// For example: 4 + (x + 5) -> x + (4 + 5)
//
///
static void PrintOps(Instruction *I, const SmallVectorImpl<ValueEntry> &Ops) {
Module *M = I->getParent()->getParent()->getParent();
- errs() << Instruction::getOpcodeName(I->getOpcode()) << " "
+ dbgs() << Instruction::getOpcodeName(I->getOpcode()) << " "
<< *Ops[0].Op->getType() << '\t';
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
- errs() << "[ ";
- WriteAsOperand(errs(), Ops[i].Op, false, M);
- errs() << ", #" << Ops[i].Rank << "] ";
+ dbgs() << "[ ";
+ WriteAsOperand(dbgs(), Ops[i].Op, false, M);
+ dbgs() << ", #" << Ops[i].Rank << "] ";
}
}
#endif
(!BinaryOperator::isNot(I) && !BinaryOperator::isNeg(I)))
++Rank;
- //DEBUG(errs() << "Calculated Rank[" << V->getName() << "] = "
+ //DEBUG(dbgs() << "Calculated Rank[" << V->getName() << "] = "
// << Rank << "\n");
return ValueRankMap[I] = Rank;
isReassociableOp(RHS, I->getOpcode()) &&
"Not an expression that needs linearization?");
- DEBUG(errs() << "Linear" << *LHS << '\n' << *RHS << '\n' << *I << '\n');
+ DEBUG(dbgs() << "Linear" << *LHS << '\n' << *RHS << '\n' << *I << '\n');
// Move the RHS instruction to live immediately before I, avoiding breaking
// dominator properties.
++NumLinear;
MadeChange = true;
- DEBUG(errs() << "Linearized: " << *I << '\n');
+ DEBUG(dbgs() << "Linearized: " << *I << '\n');
// If D is part of this expression tree, tail recurse.
if (isReassociableOp(I->getOperand(1), I->getOpcode()))
if (I->getOperand(0) != Ops[i].Op ||
I->getOperand(1) != Ops[i+1].Op) {
Value *OldLHS = I->getOperand(0);
- DEBUG(errs() << "RA: " << *I << '\n');
+ DEBUG(dbgs() << "RA: " << *I << '\n');
I->setOperand(0, Ops[i].Op);
I->setOperand(1, Ops[i+1].Op);
- DEBUG(errs() << "TO: " << *I << '\n');
+ DEBUG(dbgs() << "TO: " << *I << '\n');
MadeChange = true;
++NumChanged;
assert(i+2 < Ops.size() && "Ops index out of range!");
if (I->getOperand(1) != Ops[i].Op) {
- DEBUG(errs() << "RA: " << *I << '\n');
+ DEBUG(dbgs() << "RA: " << *I << '\n');
I->setOperand(1, Ops[i].Op);
- DEBUG(errs() << "TO: " << *I << '\n');
+ DEBUG(dbgs() << "TO: " << *I << '\n');
MadeChange = true;
++NumChanged;
}
// X = -(A+12+C+D) into X = -A + -12 + -C + -D = -12 + -A + -C + -D
// so that later, a: Y = 12+X could get reassociated with the -12 to eliminate
// the constants. We assume that instcombine will clean up the mess later if
- // we introduce tons of unnecessary negation instructions...
+ // we introduce tons of unnecessary negation instructions.
//
if (Instruction *I = dyn_cast<Instruction>(V))
if (I->getOpcode() == Instruction::Add && I->hasOneUse()) {
// non-instruction value) or right after the definition. These negates will
// be zapped by reassociate later, so we don't need much finesse here.
BinaryOperator *TheNeg = cast<BinaryOperator>(*UI);
+
+ // Verify that the negate is in this function, V might be a constant expr.
+ if (TheNeg->getParent()->getParent() != BI->getParent()->getParent())
+ continue;
BasicBlock::iterator InsertPt;
if (Instruction *InstInput = dyn_cast<Instruction>(V)) {
/// reassociation.
static Instruction *BreakUpSubtract(Instruction *Sub,
DenseMap<AssertingVH<>, unsigned> &ValueRankMap) {
- // Convert a subtract into an add and a neg instruction... so that sub
- // instructions can be commuted with other add instructions...
+ // Convert a subtract into an add and a neg instruction. This allows sub
+ // instructions to be commuted with other add instructions.
//
- // Calculate the negative value of Operand 1 of the sub instruction...
- // and set it as the RHS of the add instruction we just made...
+ // Calculate the negative value of Operand 1 of the sub instruction,
+ // and set it as the RHS of the add instruction we just made.
//
Value *NegVal = NegateValue(Sub->getOperand(1), Sub);
Instruction *New =
Sub->replaceAllUsesWith(New);
Sub->eraseFromParent();
- DEBUG(errs() << "Negated: " << *New << '\n');
+ DEBUG(dbgs() << "Negated: " << *New << '\n');
return New;
}
}
// Scan backwards and forwards among values with the same rank as element i to
-// see if X exists. If X does not exist, return i.
+// see if X exists. If X does not exist, return i. This is useful when
+// scanning for 'x' when we see '-x' because they both get the same rank.
static unsigned FindInOperandList(SmallVectorImpl<ValueEntry> &Ops, unsigned i,
Value *X) {
unsigned XRank = Ops[i].Rank;
for (unsigned j = i+1; j != e && Ops[j].Rank == XRank; ++j)
if (Ops[j].Op == X)
return j;
- // Scan backwards
+ // Scan backwards.
for (unsigned j = i-1; j != ~0U && Ops[j].Rank == XRank; --j)
if (Ops[j].Op == X)
return j;
LinearizeExprTree(BO, Factors);
bool FoundFactor = false;
- for (unsigned i = 0, e = Factors.size(); i != e; ++i)
+ bool NeedsNegate = false;
+ for (unsigned i = 0, e = Factors.size(); i != e; ++i) {
if (Factors[i].Op == Factor) {
FoundFactor = true;
Factors.erase(Factors.begin()+i);
break;
}
+
+ // If this is a negative version of this factor, remove it.
+ if (ConstantInt *FC1 = dyn_cast<ConstantInt>(Factor))
+ if (ConstantInt *FC2 = dyn_cast<ConstantInt>(Factors[i].Op))
+ if (FC1->getValue() == -FC2->getValue()) {
+ FoundFactor = NeedsNegate = true;
+ Factors.erase(Factors.begin()+i);
+ break;
+ }
+ }
+
if (!FoundFactor) {
// Make sure to restore the operands to the expression tree.
RewriteExprTree(BO, Factors);
return 0;
}
+ BasicBlock::iterator InsertPt = BO; ++InsertPt;
+
// If this was just a single multiply, remove the multiply and return the only
// remaining operand.
if (Factors.size() == 1) {
ValueRankMap.erase(BO);
BO->eraseFromParent();
- return Factors[0].Op;
+ V = Factors[0].Op;
+ } else {
+ RewriteExprTree(BO, Factors);
+ V = BO;
}
- RewriteExprTree(BO, Factors);
- return BO;
+ if (NeedsNegate)
+ V = BinaryOperator::CreateNeg(V, "neg", InsertPt);
+
+ return V;
}
/// FindSingleUseMultiplyFactors - If V is a single-use multiply, recursively
if (e == 2)
return Constant::getNullValue(Ops[0].Op->getType());
- // ... X^X -> ...
+ // Y ^ X^X -> Y
Ops.erase(Ops.begin()+i, Ops.begin()+i+2);
i -= 1; e -= 2;
++NumAnnihil;
// Scan the operand lists looking for X and -X pairs. If we find any, we
// can simplify the expression. X+-X == 0. While we're at it, scan for any
// duplicates. We want to canonicalize Y+Y+Y+Z -> 3*Y+Z.
+ //
+ // TODO: We could handle "X + ~X" -> "-1" if we wanted, since "-X = ~X+1".
+ //
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
Value *TheOp = Ops[i].Op;
// Check to see if we've seen this operand before. If so, we factor all
assert(Factors.size() > 1 && "Bad linearize!");
// Add one to FactorOccurrences for each unique factor in this op.
- if (Factors.size() == 2) {
- unsigned Occ = ++FactorOccurrences[Factors[0]];
- if (Occ > MaxOcc) { MaxOcc = Occ; MaxOccVal = Factors[0]; }
- if (Factors[0] != Factors[1]) { // Don't double count A*A.
- Occ = ++FactorOccurrences[Factors[1]];
- if (Occ > MaxOcc) { MaxOcc = Occ; MaxOccVal = Factors[1]; }
- }
- } else {
- SmallPtrSet<Value*, 4> Duplicates;
- for (unsigned i = 0, e = Factors.size(); i != e; ++i) {
- if (!Duplicates.insert(Factors[i])) continue;
-
- unsigned Occ = ++FactorOccurrences[Factors[i]];
- if (Occ > MaxOcc) { MaxOcc = Occ; MaxOccVal = Factors[i]; }
- }
+ SmallPtrSet<Value*, 8> Duplicates;
+ for (unsigned i = 0, e = Factors.size(); i != e; ++i) {
+ Value *Factor = Factors[i];
+ if (!Duplicates.insert(Factor)) continue;
+
+ unsigned Occ = ++FactorOccurrences[Factor];
+ if (Occ > MaxOcc) { MaxOcc = Occ; MaxOccVal = Factor; }
+
+ // If Factor is a negative constant, add the negated value as a factor
+ // because we can percolate the negate out. Watch for minint, which
+ // cannot be positivified.
+ if (ConstantInt *CI = dyn_cast<ConstantInt>(Factor))
+ if (CI->getValue().isNegative() && !CI->getValue().isMinSignedValue()) {
+ Factor = ConstantInt::get(CI->getContext(), -CI->getValue());
+ assert(!Duplicates.count(Factor) &&
+ "Shouldn't have two constant factors, missed a canonicalize");
+
+ unsigned Occ = ++FactorOccurrences[Factor];
+ if (Occ > MaxOcc) { MaxOcc = Occ; MaxOccVal = Factor; }
+ }
}
}
Instruction *DummyInst = BinaryOperator::CreateAdd(MaxOccVal, MaxOccVal);
SmallVector<Value*, 4> NewMulOps;
for (unsigned i = 0, e = Ops.size(); i != e; ++i) {
+ // Only try to remove factors from expressions we're allowed to.
+ BinaryOperator *BOp = dyn_cast<BinaryOperator>(Ops[i].Op);
+ if (BOp == 0 || BOp->getOpcode() != Instruction::Mul || !BOp->use_empty())
+ continue;
+
if (Value *V = RemoveFactorFromExpression(Ops[i].Op, MaxOccVal)) {
NewMulOps.push_back(V);
Ops.erase(Ops.begin()+i);
// No need for extra uses anymore.
delete DummyInst;
-
+
unsigned NumAddedValues = NewMulOps.size();
Value *V = EmitAddTreeOfValues(I, NewMulOps);
-
+
// Now that we have inserted the add tree, optimize it. This allows us to
// handle cases that require multiple factoring steps, such as this:
// A*A*B + A*A*C --> A*(A*B+A*C) --> A*(A*(B+C))
assert(NumAddedValues > 1 && "Each occurrence should contribute a value");
+ (void)NumAddedValues;
V = ReassociateExpression(cast<BinaryOperator>(V));
// Create the multiply.
switch (Opcode) {
default: break;
case Instruction::And:
- if (CstVal->isZero()) // ... & 0 -> 0
+ if (CstVal->isZero()) // X & 0 -> 0
return CstVal;
- if (CstVal->isAllOnesValue()) // ... & -1 -> ...
+ if (CstVal->isAllOnesValue()) // X & -1 -> X
Ops.pop_back();
break;
case Instruction::Mul:
- if (CstVal->isZero()) { // ... * 0 -> 0
+ if (CstVal->isZero()) { // X * 0 -> 0
++NumAnnihil;
return CstVal;
}
if (cast<ConstantInt>(CstVal)->isOne())
- Ops.pop_back(); // ... * 1 -> ...
+ Ops.pop_back(); // X * 1 -> X
break;
case Instruction::Or:
- if (CstVal->isAllOnesValue()) // ... | -1 -> -1
+ if (CstVal->isAllOnesValue()) // X | -1 -> -1
return CstVal;
// FALLTHROUGH!
case Instruction::Add:
case Instruction::Xor:
- if (CstVal->isZero()) // ... [|^+] 0 -> ...
+ if (CstVal->isZero()) // X [|^+] 0 -> X
Ops.pop_back();
break;
}
if (BI->getOpcode() == Instruction::Sub) {
if (ShouldBreakUpSubtract(BI)) {
BI = BreakUpSubtract(BI, ValueRankMap);
+ // Reset the BBI iterator in case BreakUpSubtract changed the
+ // instruction it points to.
+ BBI = BI;
+ ++BBI;
MadeChange = true;
} else if (BinaryOperator::isNeg(BI)) {
// Otherwise, this is a negation. See if the operand is a multiply tree
SmallVector<ValueEntry, 8> Ops;
LinearizeExprTree(I, Ops);
- DEBUG(errs() << "RAIn:\t"; PrintOps(I, Ops); errs() << '\n');
+ DEBUG(dbgs() << "RAIn:\t"; PrintOps(I, Ops); dbgs() << '\n');
// Now that we have linearized the tree to a list and have gathered all of
// the operands and their ranks, sort the operands by their rank. Use a
if (Value *V = OptimizeExpression(I, Ops)) {
// This expression tree simplified to something that isn't a tree,
// eliminate it.
- DEBUG(errs() << "Reassoc to scalar: " << *V << '\n');
+ DEBUG(dbgs() << "Reassoc to scalar: " << *V << '\n');
I->replaceAllUsesWith(V);
RemoveDeadBinaryOp(I);
++NumAnnihil;
Ops.insert(Ops.begin(), Tmp);
}
- DEBUG(errs() << "RAOut:\t"; PrintOps(I, Ops); errs() << '\n');
+ DEBUG(dbgs() << "RAOut:\t"; PrintOps(I, Ops); dbgs() << '\n');
if (Ops.size() == 1) {
// This expression tree simplified to something that isn't a tree,