//
//===----------------------------------------------------------------------===//
-#define DEBUG_TYPE "scalarrepl"
#include "llvm/Transforms/Scalar.h"
#include "llvm/ADT/SetVector.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/Transforms/Utils/SSAUpdater.h"
using namespace llvm;
+#define DEBUG_TYPE "scalarrepl"
+
STATISTIC(NumReplaced, "Number of allocas broken up");
STATISTIC(NumPromoted, "Number of allocas promoted");
STATISTIC(NumAdjusted, "Number of scalar allocas adjusted to allow promotion");
explicit ConvertToScalarInfo(unsigned Size, const DataLayout &DL,
unsigned SLT)
: AllocaSize(Size), DL(DL), ScalarLoadThreshold(SLT), IsNotTrivial(false),
- ScalarKind(Unknown), VectorTy(0), HadNonMemTransferAccess(false),
+ ScalarKind(Unknown), VectorTy(nullptr), HadNonMemTransferAccess(false),
HadDynamicAccess(false) { }
AllocaInst *TryConvert(AllocaInst *AI);
AllocaInst *ConvertToScalarInfo::TryConvert(AllocaInst *AI) {
// If we can't convert this scalar, or if mem2reg can trivially do it, bail
// out.
- if (!CanConvertToScalar(AI, 0, 0) || !IsNotTrivial)
- return 0;
+ if (!CanConvertToScalar(AI, 0, nullptr) || !IsNotTrivial)
+ return nullptr;
// If an alloca has only memset / memcpy uses, it may still have an Unknown
// ScalarKind. Treat it as an Integer below.
// Do not convert to scalar integer if the alloca size exceeds the
// scalar load threshold.
if (BitWidth > ScalarLoadThreshold)
- return 0;
+ return nullptr;
if ((ScalarKind == ImplicitVector || ScalarKind == Integer) &&
!HadNonMemTransferAccess && !DL.fitsInLegalInteger(BitWidth))
- return 0;
+ return nullptr;
// Dynamic accesses on integers aren't yet supported. They need us to shift
// by a dynamic amount which could be difficult to work out as we might not
// know whether to use a left or right shift.
if (ScalarKind == Integer && HadDynamicAccess)
- return 0;
+ return nullptr;
DEBUG(dbgs() << "CONVERT TO SCALAR INTEGER: " << *AI << "\n");
// Create and insert the integer alloca.
NewTy = IntegerType::get(AI->getContext(), BitWidth);
}
- AllocaInst *NewAI = new AllocaInst(NewTy, 0, "", AI->getParent()->begin());
- ConvertUsesToScalar(AI, NewAI, 0, 0);
+ AllocaInst *NewAI = new AllocaInst(NewTy, nullptr, "",
+ AI->getParent()->begin());
+ ConvertUsesToScalar(AI, NewAI, 0, nullptr);
return NewAI;
}
// Compute the offset that this GEP adds to the pointer.
SmallVector<Value*, 8> Indices(GEP->op_begin()+1, GEP->op_end());
- Value *GEPNonConstantIdx = 0;
+ Value *GEPNonConstantIdx = nullptr;
if (!GEP->hasAllConstantIndices()) {
if (!isa<VectorType>(PtrTy->getElementType()))
return false;
if (NonConstantIdx)
return false;
ConstantInt *Len = dyn_cast<ConstantInt>(MTI->getLength());
- if (Len == 0 || Len->getZExtValue() != AllocaSize || Offset != 0)
+ if (!Len || Len->getZExtValue() != AllocaSize || Offset != 0)
return false;
IsNotTrivial = true; // Can't be mem2reg'd.
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(User)) {
// Compute the offset that this GEP adds to the pointer.
SmallVector<Value*, 8> Indices(GEP->op_begin()+1, GEP->op_end());
- Value* GEPNonConstantIdx = 0;
+ Value* GEPNonConstantIdx = nullptr;
if (!GEP->hasAllConstantIndices()) {
assert(!NonConstantIdx &&
"Dynamic GEP reading from dynamic GEP unsupported");
Instruction *Old = Builder.CreateLoad(NewAI, NewAI->getName()+".in");
Value *New = ConvertScalar_InsertValue(
ConstantInt::get(User->getContext(), APVal),
- Old, Offset, 0, Builder);
+ Old, Offset, nullptr, Builder);
Builder.CreateStore(New, NewAI);
// If the load we just inserted is now dead, then the memset overwrote
for (unsigned i = 0, e = ST->getNumElements(); i != e; ++i) {
Value *Elt = ConvertScalar_ExtractValue(FromVal, ST->getElementType(i),
Offset+Layout.getElementOffsetInBits(i),
- 0, Builder);
+ nullptr, Builder);
Res = Builder.CreateInsertValue(Res, Elt, i);
}
return Res;
Value *Res = UndefValue::get(AT);
for (unsigned i = 0, e = AT->getNumElements(); i != e; ++i) {
Value *Elt = ConvertScalar_ExtractValue(FromVal, AT->getElementType(),
- Offset+i*EltSize, 0, Builder);
+ Offset+i*EltSize, nullptr,
+ Builder);
Res = Builder.CreateInsertValue(Res, Elt, i);
}
return Res;
Value *Elt = Builder.CreateExtractValue(SV, i);
Old = ConvertScalar_InsertValue(Elt, Old,
Offset+Layout.getElementOffsetInBits(i),
- 0, Builder);
+ nullptr, Builder);
}
return Old;
}
uint64_t EltSize = DL.getTypeAllocSizeInBits(AT->getElementType());
for (unsigned i = 0, e = AT->getNumElements(); i != e; ++i) {
Value *Elt = Builder.CreateExtractValue(SV, i);
- Old = ConvertScalar_InsertValue(Elt, Old, Offset+i*EltSize, 0, Builder);
+ Old = ConvertScalar_InsertValue(Elt, Old, Offset+i*EltSize, nullptr,
+ Builder);
}
return Old;
}
return false;
DataLayoutPass *DLP = getAnalysisIfAvailable<DataLayoutPass>();
- DL = DLP ? &DLP->getDataLayout() : 0;
+ DL = DLP ? &DLP->getDataLayout() : nullptr;
bool Changed = performPromotion(F);
public:
AllocaPromoter(const SmallVectorImpl<Instruction*> &Insts, SSAUpdater &S,
DIBuilder *DB)
- : LoadAndStorePromoter(Insts, S), AI(0), DIB(DB) {}
+ : LoadAndStorePromoter(Insts, S), AI(nullptr), DIB(DB) {}
void run(AllocaInst *AI, const SmallVectorImpl<Instruction*> &Insts) {
// Remember which alloca we're promoting (for isInstInList).
for (SmallVectorImpl<DbgValueInst *>::const_iterator I = DVIs.begin(),
E = DVIs.end(); I != E; ++I) {
DbgValueInst *DVI = *I;
- Value *Arg = NULL;
+ Value *Arg = nullptr;
if (StoreInst *SI = dyn_cast<StoreInst>(Inst)) {
// If an argument is zero extended then use argument directly. The ZExt
// may be zapped by an optimization pass in future.
/// We can do this to a select if its only uses are loads and if the operand to
/// the select can be loaded unconditionally.
static bool isSafeSelectToSpeculate(SelectInst *SI, const DataLayout *DL) {
- bool TDerefable = SI->getTrueValue()->isDereferenceablePointer();
- bool FDerefable = SI->getFalseValue()->isDereferenceablePointer();
+ bool TDerefable = SI->getTrueValue()->isDereferenceablePointer(DL);
+ bool FDerefable = SI->getFalseValue()->isDereferenceablePointer(DL);
for (User *U : SI->users()) {
LoadInst *LI = dyn_cast<LoadInst>(U);
- if (LI == 0 || !LI->isSimple()) return false;
+ if (!LI || !LI->isSimple()) return false;
// Both operands to the select need to be dereferencable, either absolutely
// (e.g. allocas) or at this point because we can see other accesses to it.
unsigned MaxAlign = 0;
for (User *U : PN->users()) {
LoadInst *LI = dyn_cast<LoadInst>(U);
- if (LI == 0 || !LI->isSimple()) return false;
+ if (!LI || !LI->isSimple()) return false;
// For now we only allow loads in the same block as the PHI. This is a
// common case that happens when instcombine merges two loads through a PHI.
// If this pointer is always safe to load, or if we can prove that there is
// already a load in the block, then we can move the load to the pred block.
- if (InVal->isDereferenceablePointer() ||
+ if (InVal->isDereferenceablePointer(DL) ||
isSafeToLoadUnconditionally(InVal, Pred->getTerminator(), MaxAlign, DL))
continue;
LoadInst *FalseLoad =
Builder.CreateLoad(SI->getFalseValue(), LI->getName()+".f");
- // Transfer alignment and TBAA info if present.
+ // Transfer alignment and AA info if present.
TrueLoad->setAlignment(LI->getAlignment());
FalseLoad->setAlignment(LI->getAlignment());
- if (MDNode *Tag = LI->getMetadata(LLVMContext::MD_tbaa)) {
- TrueLoad->setMetadata(LLVMContext::MD_tbaa, Tag);
- FalseLoad->setMetadata(LLVMContext::MD_tbaa, Tag);
+
+ AAMDNodes Tags;
+ LI->getAAMetadata(Tags);
+ if (Tags) {
+ TrueLoad->setAAMetadata(Tags);
+ FalseLoad->setAAMetadata(Tags);
}
Value *V = Builder.CreateSelect(SI->getCondition(), TrueLoad, FalseLoad);
PHINode *NewPN = PHINode::Create(LoadTy, PN->getNumIncomingValues(),
PN->getName()+".ld", PN);
- // Get the TBAA tag and alignment to use from one of the loads. It doesn't
+ // Get the AA tags and alignment to use from one of the loads. It doesn't
// matter which one we get and if any differ, it doesn't matter.
LoadInst *SomeLoad = cast<LoadInst>(PN->user_back());
- MDNode *TBAATag = SomeLoad->getMetadata(LLVMContext::MD_tbaa);
+
+ AAMDNodes AATags;
+ SomeLoad->getAAMetadata(AATags);
unsigned Align = SomeLoad->getAlignment();
// Rewrite all loads of the PN to use the new PHI.
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
BasicBlock *Pred = PN->getIncomingBlock(i);
LoadInst *&Load = InsertedLoads[Pred];
- if (Load == 0) {
+ if (!Load) {
Load = new LoadInst(PN->getIncomingValue(i),
PN->getName() + "." + Pred->getName(),
Pred->getTerminator());
Load->setAlignment(Align);
- if (TBAATag) Load->setMetadata(LLVMContext::MD_tbaa, TBAATag);
+ if (AATags) Load->setAAMetadata(AATags);
}
NewPN->addIncoming(Load, Pred);
bool SROA::performPromotion(Function &F) {
std::vector<AllocaInst*> Allocas;
- DominatorTree *DT = 0;
+ DominatorTree *DT = nullptr;
if (HasDomTree)
DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
if (StructType *ST = dyn_cast<StructType>(AI->getAllocatedType())) {
ElementAllocas.reserve(ST->getNumContainedTypes());
for (unsigned i = 0, e = ST->getNumContainedTypes(); i != e; ++i) {
- AllocaInst *NA = new AllocaInst(ST->getContainedType(i), 0,
+ AllocaInst *NA = new AllocaInst(ST->getContainedType(i), nullptr,
AI->getAlignment(),
AI->getName() + "." + Twine(i), AI);
ElementAllocas.push_back(NA);
ElementAllocas.reserve(AT->getNumElements());
Type *ElTy = AT->getElementType();
for (unsigned i = 0, e = AT->getNumElements(); i != e; ++i) {
- AllocaInst *NA = new AllocaInst(ElTy, 0, AI->getAlignment(),
+ AllocaInst *NA = new AllocaInst(ElTy, nullptr, AI->getAlignment(),
AI->getName() + "." + Twine(i), AI);
ElementAllocas.push_back(NA);
WorkList.push_back(NA); // Add to worklist for recursive processing
// Zero out the operand and see if it becomes trivially dead.
// (But, don't add allocas to the dead instruction list -- they are
// already on the worklist and will be deleted separately.)
- *OI = 0;
+ *OI = nullptr;
if (isInstructionTriviallyDead(U) && !isa<AllocaInst>(U))
DeadInsts.push_back(U);
}
isSafeForScalarRepl(GEPI, GEPOffset, Info);
} else if (MemIntrinsic *MI = dyn_cast<MemIntrinsic>(User)) {
ConstantInt *Length = dyn_cast<ConstantInt>(MI->getLength());
- if (Length == 0)
- return MarkUnsafe(Info, User);
- if (Length->isNegative())
+ if (!Length || Length->isNegative())
return MarkUnsafe(Info, User);
- isSafeMemAccess(Offset, Length->getZExtValue(), 0,
+ isSafeMemAccess(Offset, Length->getZExtValue(), nullptr,
U.getOperandNo() == 0, Info, MI,
true /*AllowWholeAccess*/);
} else if (LoadInst *LI = dyn_cast<LoadInst>(User)) {
Type *&EltTy) {
if (ArrayType *AT = dyn_cast<ArrayType>(T)) {
NumElts = AT->getNumElements();
- EltTy = (NumElts == 0 ? 0 : AT->getElementType());
+ EltTy = (NumElts == 0 ? nullptr : AT->getElementType());
return true;
}
if (StructType *ST = dyn_cast<StructType>(T)) {
NumElts = ST->getNumContainedTypes();
- EltTy = (NumElts == 0 ? 0 : ST->getContainedType(0));
+ EltTy = (NumElts == 0 ? nullptr : ST->getContainedType(0));
for (unsigned n = 1; n < NumElts; ++n) {
if (ST->getContainedType(n) != EltTy)
return false;
// In this case, it must be the last GEP operand which is dynamic so keep that
// aside until we've found the constant GEP offset then add it back in at the
// end.
- Value* NonConstantIdx = 0;
+ Value* NonConstantIdx = nullptr;
if (!GEPI->hasAllConstantIndices())
NonConstantIdx = Indices.pop_back_val();
Offset += DL->getIndexedOffset(GEPI->getPointerOperandType(), Indices);
if (NewOffset) {
// Splice the first element and index 'NewOffset' bytes in. SROA will
// split the alloca again later.
- Value *V = Builder.CreateBitCast(NewElts[Idx], Builder.getInt8PtrTy());
+ unsigned AS = AI->getType()->getAddressSpace();
+ Value *V = Builder.CreateBitCast(NewElts[Idx], Builder.getInt8PtrTy(AS));
V = Builder.CreateGEP(V, Builder.getInt64(NewOffset));
IdxTy = NewElts[Idx]->getAllocatedType();
// appropriate type. The "Other" pointer is the pointer that goes to memory
// that doesn't have anything to do with the alloca that we are promoting. For
// memset, this Value* stays null.
- Value *OtherPtr = 0;
+ Value *OtherPtr = nullptr;
unsigned MemAlignment = MI->getAlignment();
if (MemTransferInst *MTI = dyn_cast<MemTransferInst>(MI)) { // memmove/memcopy
if (Inst == MTI->getRawDest())
for (unsigned i = 0, e = NewElts.size(); i != e; ++i) {
// If this is a memcpy/memmove, emit a GEP of the other element address.
- Value *OtherElt = 0;
+ Value *OtherElt = nullptr;
unsigned OtherEltAlign = MemAlignment;
if (OtherPtr) {
// There are two forms here: AI could be an array or struct. Both cases
// have different ways to compute the element offset.
- const StructLayout *Layout = 0;
+ const StructLayout *Layout = nullptr;
uint64_t ArrayEltBitOffset = 0;
if (StructType *EltSTy = dyn_cast<StructType>(AllocaEltTy)) {
Layout = DL->getStructLayout(EltSTy);
projects / oota-llvm.git / blobdiff