STATISTIC(NumLinearMaps, "Number of switch instructions turned into linear mapping");
STATISTIC(NumLookupTables, "Number of switch instructions turned into lookup tables");
STATISTIC(NumLookupTablesHoles, "Number of switch instructions turned into lookup tables (holes checked)");
+STATISTIC(NumTableCmpReuses, "Number of reused switch table lookup compares");
STATISTIC(NumSinkCommons, "Number of common instructions sunk down to the end block");
STATISTIC(NumSpeculations, "Number of speculative executed instructions");
if (HasWeight)
for (unsigned MD_i = 1, MD_e = MD->getNumOperands(); MD_i < MD_e;
++MD_i) {
- ConstantInt* CI = dyn_cast<ConstantInt>(MD->getOperand(MD_i));
- assert(CI);
+ ConstantInt *CI = mdconst::extract<ConstantInt>(MD->getOperand(MD_i));
Weights.push_back(CI->getValue().getZExtValue());
}
for (SwitchInst::CaseIt i = SI->case_end(), e = SI->case_begin(); i != e;) {
MDNode *MD = TI->getMetadata(LLVMContext::MD_prof);
assert(MD);
for (unsigned i = 1, e = MD->getNumOperands(); i < e; ++i) {
- ConstantInt *CI = cast<ConstantInt>(MD->getOperand(i));
+ ConstantInt *CI = mdconst::extract<ConstantInt>(MD->getOperand(i));
Weights.push_back(CI->getValue().getZExtValue());
}
"Looking for probabilities on unconditional branch?");
MDNode *ProfileData = BI->getMetadata(LLVMContext::MD_prof);
if (!ProfileData || ProfileData->getNumOperands() != 3) return false;
- ConstantInt *CITrue = dyn_cast<ConstantInt>(ProfileData->getOperand(1));
- ConstantInt *CIFalse = dyn_cast<ConstantInt>(ProfileData->getOperand(2));
+ ConstantInt *CITrue =
+ mdconst::dyn_extract<ConstantInt>(ProfileData->getOperand(1));
+ ConstantInt *CIFalse =
+ mdconst::dyn_extract<ConstantInt>(ProfileData->getOperand(2));
if (!CITrue || !CIFalse) return false;
ProbTrue = CITrue->getValue().getZExtValue();
ProbFalse = CIFalse->getValue().getZExtValue();
return SI->getNumCases() * 10 >= TableSize * 4;
}
+/// Try to reuse the switch table index compare. Following pattern:
+/// \code
+/// if (idx < tablesize)
+/// r = table[idx]; // table does not contain default_value
+/// else
+/// r = default_value;
+/// if (r != default_value)
+/// ...
+/// \endcode
+/// Is optimized to:
+/// \code
+/// cond = idx < tablesize;
+/// if (cond)
+/// r = table[idx];
+/// else
+/// r = default_value;
+/// if (cond)
+/// ...
+/// \endcode
+/// Jump threading will then eliminate the second if(cond).
+static void reuseTableCompare(User *PhiUser, BasicBlock *PhiBlock,
+ BranchInst *RangeCheckBranch, Constant *DefaultValue,
+ const SmallVectorImpl<std::pair<ConstantInt*, Constant*> >& Values) {
+
+ ICmpInst *CmpInst = dyn_cast<ICmpInst>(PhiUser);
+ if (!CmpInst)
+ return;
+
+ // We require that the compare is in the same block as the phi so that jump
+ // threading can do its work afterwards.
+ if (CmpInst->getParent() != PhiBlock)
+ return;
+
+ Constant *CmpOp1 = dyn_cast<Constant>(CmpInst->getOperand(1));
+ if (!CmpOp1)
+ return;
+
+ Value *RangeCmp = RangeCheckBranch->getCondition();
+ Constant *TrueConst = ConstantInt::getTrue(RangeCmp->getType());
+ Constant *FalseConst = ConstantInt::getFalse(RangeCmp->getType());
+
+ // Check if the compare with the default value is constant true or false.
+ Constant *DefaultConst = ConstantExpr::getICmp(CmpInst->getPredicate(),
+ DefaultValue, CmpOp1, true);
+ if (DefaultConst != TrueConst && DefaultConst != FalseConst)
+ return;
+
+ // Check if the compare with the case values is distinct from the default
+ // compare result.
+ for (auto ValuePair : Values) {
+ Constant *CaseConst = ConstantExpr::getICmp(CmpInst->getPredicate(),
+ ValuePair.second, CmpOp1, true);
+ if (!CaseConst || CaseConst == DefaultConst)
+ return;
+ assert((CaseConst == TrueConst || CaseConst == FalseConst) &&
+ "Expect true or false as compare result.");
+ }
+
+ // Check if the branch instruction dominates the phi node. It's a simple
+ // dominance check, but sufficient for our needs.
+ // Although this check is invariant in the calling loops, it's better to do it
+ // at this late stage. Practically we do it at most once for a switch.
+ BasicBlock *BranchBlock = RangeCheckBranch->getParent();
+ for (auto PI = pred_begin(PhiBlock), E = pred_end(PhiBlock); PI != E; ++PI) {
+ BasicBlock *Pred = *PI;
+ if (Pred != BranchBlock && Pred->getUniquePredecessor() != BranchBlock)
+ return;
+ }
+
+ if (DefaultConst == FalseConst) {
+ // The compare yields the same result. We can replace it.
+ CmpInst->replaceAllUsesWith(RangeCmp);
+ ++NumTableCmpReuses;
+ } else {
+ // The compare yields the same result, just inverted. We can replace it.
+ Value *InvertedTableCmp = BinaryOperator::CreateXor(RangeCmp,
+ ConstantInt::get(RangeCmp->getType(), 1), "inverted.cmp",
+ RangeCheckBranch);
+ CmpInst->replaceAllUsesWith(InvertedTableCmp);
+ ++NumTableCmpReuses;
+ }
+}
+
/// SwitchToLookupTable - If the switch is only used to initialize one or more
/// phi nodes in a common successor block with different constant values,
/// replace the switch with lookup tables.
// If the table has holes, we need a constant result for the default case
// or a bitmask that fits in a register.
SmallVector<std::pair<PHINode*, Constant*>, 4> DefaultResultsList;
- bool HasDefaultResults = false;
- if (TableHasHoles) {
- HasDefaultResults = GetCaseResults(SI, nullptr, SI->getDefaultDest(),
+ bool HasDefaultResults = GetCaseResults(SI, nullptr, SI->getDefaultDest(),
&CommonDest, DefaultResultsList, DL);
- }
bool NeedMask = (TableHasHoles && !HasDefaultResults);
if (NeedMask) {
// lookup table BB. Otherwise, check if the condition value is within the case
// range. If it is so, branch to the new BB. Otherwise branch to SI's default
// destination.
+ BranchInst *RangeCheckBranch = nullptr;
+
const bool GeneratingCoveredLookupTable = MaxTableSize == TableSize;
if (GeneratingCoveredLookupTable) {
Builder.CreateBr(LookupBB);
} else {
Value *Cmp = Builder.CreateICmpULT(TableIndex, ConstantInt::get(
MinCaseVal->getType(), TableSize));
- Builder.CreateCondBr(Cmp, LookupBB, SI->getDefaultDest());
+ RangeCheckBranch = Builder.CreateCondBr(Cmp, LookupBB, SI->getDefaultDest());
}
// Populate the BB that does the lookups.
bool ReturnedEarly = false;
for (size_t I = 0, E = PHIs.size(); I != E; ++I) {
PHINode *PHI = PHIs[I];
+ const ResultListTy &ResultList = ResultLists[PHI];
// If using a bitmask, use any value to fill the lookup table holes.
Constant *DV = NeedMask ? ResultLists[PHI][0].second : DefaultResults[PHI];
- SwitchLookupTable Table(Mod, TableSize, MinCaseVal, ResultLists[PHI],
- DV, DL);
+ SwitchLookupTable Table(Mod, TableSize, MinCaseVal, ResultList, DV, DL);
Value *Result = Table.BuildLookup(TableIndex, Builder);
break;
}
+ // Do a small peephole optimization: re-use the switch table compare if
+ // possible.
+ if (!TableHasHoles && HasDefaultResults && RangeCheckBranch) {
+ BasicBlock *PhiBlock = PHI->getParent();
+ // Search for compare instructions which use the phi.
+ for (auto *User : PHI->users()) {
+ reuseTableCompare(User, PhiBlock, RangeCheckBranch, DV, ResultList);
+ }
+ }
+
PHI->addIncoming(Result, LookupBB);
}
projects / oota-llvm.git / blobdiff