#include "llvm/ADT/StringExtras.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/AliasSetTracker.h"
+#include "llvm/Analysis/AssumptionCache.h"
#include "llvm/Analysis/BlockFrequencyInfo.h"
+#include "llvm/Analysis/CodeMetrics.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopIterator.h"
#include "llvm/Analysis/LoopPass.h"
cl::desc("Sets the SIMD width. Zero is autoselect."));
static cl::opt<unsigned>
-VectorizationUnroll("force-vector-unroll", cl::init(0), cl::Hidden,
- cl::desc("Sets the vectorization unroll count. "
+VectorizationInterleave("force-vector-interleave", cl::init(0), cl::Hidden,
+ cl::desc("Sets the vectorization interleave count. "
"Zero is autoselect."));
static cl::opt<bool>
"force-target-num-vector-regs", cl::init(0), cl::Hidden,
cl::desc("A flag that overrides the target's number of vector registers."));
-/// Maximum vectorization unroll count.
-static const unsigned MaxUnrollFactor = 16;
+/// Maximum vectorization interleave count.
+static const unsigned MaxInterleaveFactor = 16;
-static cl::opt<unsigned> ForceTargetMaxScalarUnrollFactor(
- "force-target-max-scalar-unroll", cl::init(0), cl::Hidden,
- cl::desc("A flag that overrides the target's max unroll factor for scalar "
- "loops."));
+static cl::opt<unsigned> ForceTargetMaxScalarInterleaveFactor(
+ "force-target-max-scalar-interleave", cl::init(0), cl::Hidden,
+ cl::desc("A flag that overrides the target's max interleave factor for "
+ "scalar loops."));
-static cl::opt<unsigned> ForceTargetMaxVectorUnrollFactor(
- "force-target-max-vector-unroll", cl::init(0), cl::Hidden,
- cl::desc("A flag that overrides the target's max unroll factor for "
+static cl::opt<unsigned> ForceTargetMaxVectorInterleaveFactor(
+ "force-target-max-vector-interleave", cl::init(0), cl::Hidden,
+ cl::desc("A flag that overrides the target's max interleave factor for "
"vectorized loops."));
static cl::opt<unsigned> ForceTargetInstructionCost(
"enable-cond-stores-vec", cl::init(false), cl::Hidden,
cl::desc("Enable if predication of stores during vectorization."));
+static cl::opt<unsigned> MaxNestedScalarReductionUF(
+ "max-nested-scalar-reduction-unroll", cl::init(2), cl::Hidden,
+ cl::desc("The maximum unroll factor to use when unrolling a scalar "
+ "reduction in a nested loop."));
+
namespace {
// Forward declarations.
/// element.
virtual Value *getBroadcastInstrs(Value *V);
- /// This function adds 0, 1, 2 ... to each vector element, starting at zero.
- /// If Negate is set then negative numbers are added e.g. (0, -1, -2, ...).
- /// The sequence starts at StartIndex.
- virtual Value *getConsecutiveVector(Value* Val, int StartIdx, bool Negate);
+ /// This function adds (StartIdx, StartIdx + Step, StartIdx + 2*Step, ...)
+ /// to each vector element of Val. The sequence starts at StartIndex.
+ virtual Value *getStepVector(Value *Val, int StartIdx, Value *Step);
/// When we go over instructions in the basic block we rely on previous
/// values within the current basic block or on loop invariant values.
bool IfPredicateStore = false) override;
void vectorizeMemoryInstruction(Instruction *Instr) override;
Value *getBroadcastInstrs(Value *V) override;
- Value *getConsecutiveVector(Value* Val, int StartIdx, bool Negate) override;
+ Value *getStepVector(Value *Val, int StartIdx, Value *Step) override;
Value *reverseVector(Value *Vec) override;
};
LoopVectorizationLegality(Loop *L, ScalarEvolution *SE, const DataLayout *DL,
DominatorTree *DT, TargetLibraryInfo *TLI,
- AliasAnalysis *AA, Function *F)
+ AliasAnalysis *AA, Function *F,
+ const TargetTransformInfo *TTI)
: NumLoads(0), NumStores(0), NumPredStores(0), TheLoop(L), SE(SE), DL(DL),
- DT(DT), TLI(TLI), AA(AA), TheFunction(F), Induction(nullptr),
+ DT(DT), TLI(TLI), AA(AA), TheFunction(F), TTI(TTI), Induction(nullptr),
WidestIndTy(nullptr), HasFunNoNaNAttr(false), MaxSafeDepDistBytes(-1U) {
}
/// This enum represents the kinds of inductions that we support.
enum InductionKind {
- IK_NoInduction, ///< Not an induction variable.
- IK_IntInduction, ///< Integer induction variable. Step = 1.
- IK_ReverseIntInduction, ///< Reverse int induction variable. Step = -1.
- IK_PtrInduction, ///< Pointer induction var. Step = sizeof(elem).
- IK_ReversePtrInduction ///< Reverse ptr indvar. Step = - sizeof(elem).
+ IK_NoInduction, ///< Not an induction variable.
+ IK_IntInduction, ///< Integer induction variable. Step = C.
+ IK_PtrInduction ///< Pointer induction var. Step = C / sizeof(elem).
};
// This enum represents the kind of minmax reduction.
/// A struct for saving information about induction variables.
struct InductionInfo {
- InductionInfo(Value *Start, InductionKind K) : StartValue(Start), IK(K) {}
- InductionInfo() : StartValue(nullptr), IK(IK_NoInduction) {}
+ InductionInfo(Value *Start, InductionKind K, ConstantInt *Step)
+ : StartValue(Start), IK(K), StepValue(Step) {
+ assert(IK != IK_NoInduction && "Not an induction");
+ assert(StartValue && "StartValue is null");
+ assert(StepValue && !StepValue->isZero() && "StepValue is zero");
+ assert((IK != IK_PtrInduction || StartValue->getType()->isPointerTy()) &&
+ "StartValue is not a pointer for pointer induction");
+ assert((IK != IK_IntInduction || StartValue->getType()->isIntegerTy()) &&
+ "StartValue is not an integer for integer induction");
+ assert(StepValue->getType()->isIntegerTy() &&
+ "StepValue is not an integer");
+ }
+ InductionInfo()
+ : StartValue(nullptr), IK(IK_NoInduction), StepValue(nullptr) {}
+
+ /// Get the consecutive direction. Returns:
+ /// 0 - unknown or non-consecutive.
+ /// 1 - consecutive and increasing.
+ /// -1 - consecutive and decreasing.
+ int getConsecutiveDirection() const {
+ if (StepValue && (StepValue->isOne() || StepValue->isMinusOne()))
+ return StepValue->getSExtValue();
+ return 0;
+ }
+
+ /// Compute the transformed value of Index at offset StartValue using step
+ /// StepValue.
+ /// For integer induction, returns StartValue + Index * StepValue.
+ /// For pointer induction, returns StartValue[Index * StepValue].
+ /// FIXME: The newly created binary instructions should contain nsw/nuw
+ /// flags, which can be found from the original scalar operations.
+ Value *transform(IRBuilder<> &B, Value *Index) const {
+ switch (IK) {
+ case IK_IntInduction:
+ assert(Index->getType() == StartValue->getType() &&
+ "Index type does not match StartValue type");
+ if (StepValue->isMinusOne())
+ return B.CreateSub(StartValue, Index);
+ if (!StepValue->isOne())
+ Index = B.CreateMul(Index, StepValue);
+ return B.CreateAdd(StartValue, Index);
+
+ case IK_PtrInduction:
+ if (StepValue->isMinusOne())
+ Index = B.CreateNeg(Index);
+ else if (!StepValue->isOne())
+ Index = B.CreateMul(Index, StepValue);
+ return B.CreateGEP(StartValue, Index);
+
+ case IK_NoInduction:
+ return nullptr;
+ }
+ llvm_unreachable("invalid enum");
+ }
+
/// Start value.
TrackingVH<Value> StartValue;
/// Induction kind.
InductionKind IK;
+ /// Step value.
+ ConstantInt *StepValue;
};
/// ReductionList contains the reduction descriptors for all
}
SmallPtrSet<Value *, 8>::iterator strides_end() { return StrideSet.end(); }
+ /// Returns true if the target machine supports masked store operation
+ /// for the given \p DataType and kind of access to \p Ptr.
+ bool isLegalMaskedStore(Type *DataType, Value *Ptr) {
+ return TTI->isLegalMaskedStore(DataType, isConsecutivePtr(Ptr));
+ }
+ /// Returns true if the target machine supports masked load operation
+ /// for the given \p DataType and kind of access to \p Ptr.
+ bool isLegalMaskedLoad(Type *DataType, Value *Ptr) {
+ return TTI->isLegalMaskedLoad(DataType, isConsecutivePtr(Ptr));
+ }
+ /// Returns true if vector representation of the instruction \p I
+ /// requires mask.
+ bool isMaskRequired(const Instruction* I) {
+ return (MaskedOp.count(I) != 0);
+ }
private:
/// Check if a single basic block loop is vectorizable.
/// At this point we know that this is a loop with a constant trip count
/// Return true if all of the instructions in the block can be speculatively
/// executed. \p SafePtrs is a list of addresses that are known to be legal
/// and we know that we can read from them without segfault.
- bool blockCanBePredicated(BasicBlock *BB, SmallPtrSet<Value *, 8>& SafePtrs);
+ bool blockCanBePredicated(BasicBlock *BB, SmallPtrSetImpl<Value *> &SafePtrs);
/// Returns True, if 'Phi' is the kind of reduction variable for type
/// 'Kind'. If this is a reduction variable, it adds it to ReductionList.
/// pattern corresponding to a min(X, Y) or max(X, Y).
static ReductionInstDesc isMinMaxSelectCmpPattern(Instruction *I,
ReductionInstDesc &Prev);
- /// Returns the induction kind of Phi. This function may return NoInduction
- /// if the PHI is not an induction variable.
- InductionKind isInductionVariable(PHINode *Phi);
+ /// Returns the induction kind of Phi and record the step. This function may
+ /// return NoInduction if the PHI is not an induction variable.
+ InductionKind isInductionVariable(PHINode *Phi, ConstantInt *&StepValue);
/// \brief Collect memory access with loop invariant strides.
///
/// Looks for accesses like "a[i * StrideA]" where "StrideA" is loop
/// invariant.
- void collectStridedAcccess(Value *LoadOrStoreInst);
+ void collectStridedAccess(Value *LoadOrStoreInst);
/// Report an analysis message to assist the user in diagnosing loops that are
/// not vectorized.
AliasAnalysis *AA;
/// Parent function
Function *TheFunction;
+ /// Target Transform Info
+ const TargetTransformInfo *TTI;
// --- vectorization state --- //
ValueToValueMap Strides;
SmallPtrSet<Value *, 8> StrideSet;
+
+ /// While vectorizing these instructions we have to generate a
+ /// call to the appropriate masked intrinsic
+ SmallPtrSet<const Instruction*, 8> MaskedOp;
};
/// LoopVectorizationCostModel - estimates the expected speedups due to
LoopVectorizationLegality *Legal,
const TargetTransformInfo &TTI,
const DataLayout *DL, const TargetLibraryInfo *TLI,
- const Function *F, const LoopVectorizeHints *Hints)
- : TheLoop(L), SE(SE), LI(LI), Legal(Legal), TTI(TTI), DL(DL), TLI(TLI), TheFunction(F), Hints(Hints) {}
+ AssumptionCache *AC, const Function *F,
+ const LoopVectorizeHints *Hints)
+ : TheLoop(L), SE(SE), LI(LI), Legal(Legal), TTI(TTI), DL(DL), TLI(TLI),
+ TheFunction(F), Hints(Hints) {
+ CodeMetrics::collectEphemeralValues(L, AC, EphValues);
+ }
/// Information about vectorization costs
struct VectorizationFactor {
*TheFunction, DL, Message.str());
}
+ /// Values used only by @llvm.assume calls.
+ SmallPtrSet<const Value *, 32> EphValues;
+
/// The loop that we evaluate.
Loop *TheLoop;
/// Scev analysis.
/// Utility class for getting and setting loop vectorizer hints in the form
/// of loop metadata.
+/// This class keeps a number of loop annotations locally (as member variables)
+/// and can, upon request, write them back as metadata on the loop. It will
+/// initially scan the loop for existing metadata, and will update the local
+/// values based on information in the loop.
+/// We cannot write all values to metadata, as the mere presence of some info,
+/// for example 'force', means a decision has been made. So, we need to be
+/// careful NOT to add them if the user hasn't specifically asked so.
class LoopVectorizeHints {
+ enum HintKind {
+ HK_WIDTH,
+ HK_UNROLL,
+ HK_FORCE
+ };
+
+ /// Hint - associates name and validation with the hint value.
+ struct Hint {
+ const char * Name;
+ unsigned Value; // This may have to change for non-numeric values.
+ HintKind Kind;
+
+ Hint(const char * Name, unsigned Value, HintKind Kind)
+ : Name(Name), Value(Value), Kind(Kind) { }
+
+ bool validate(unsigned Val) {
+ switch (Kind) {
+ case HK_WIDTH:
+ return isPowerOf2_32(Val) && Val <= MaxVectorWidth;
+ case HK_UNROLL:
+ return isPowerOf2_32(Val) && Val <= MaxInterleaveFactor;
+ case HK_FORCE:
+ return (Val <= 1);
+ }
+ return false;
+ }
+ };
+
+ /// Vectorization width.
+ Hint Width;
+ /// Vectorization interleave factor.
+ Hint Interleave;
+ /// Vectorization forced
+ Hint Force;
+
+ /// Return the loop metadata prefix.
+ static StringRef Prefix() { return "llvm.loop."; }
+
public:
enum ForceKind {
FK_Undefined = -1, ///< Not selected.
FK_Enabled = 1, ///< Forcing enabled.
};
- LoopVectorizeHints(const Loop *L, bool DisableUnrolling)
- : Width(VectorizationFactor),
- Unroll(DisableUnrolling),
- Force(FK_Undefined),
- LoopID(L->getLoopID()) {
- getHints(L);
- // force-vector-unroll overrides DisableUnrolling.
- if (VectorizationUnroll.getNumOccurrences() > 0)
- Unroll = VectorizationUnroll;
-
- DEBUG(if (DisableUnrolling && Unroll == 1) dbgs()
- << "LV: Unrolling disabled by the pass manager\n");
- }
+ LoopVectorizeHints(const Loop *L, bool DisableInterleaving)
+ : Width("vectorize.width", VectorizationFactor, HK_WIDTH),
+ Interleave("interleave.count", DisableInterleaving, HK_UNROLL),
+ Force("vectorize.enable", FK_Undefined, HK_FORCE),
+ TheLoop(L) {
+ // Populate values with existing loop metadata.
+ getHintsFromMetadata();
- /// Return the loop metadata prefix.
- static StringRef Prefix() { return "llvm.loop."; }
+ // force-vector-interleave overrides DisableInterleaving.
+ if (VectorizationInterleave.getNumOccurrences() > 0)
+ Interleave.Value = VectorizationInterleave;
- MDNode *createHint(LLVMContext &Context, StringRef Name, unsigned V) const {
- SmallVector<Value*, 2> Vals;
- Vals.push_back(MDString::get(Context, Name));
- Vals.push_back(ConstantInt::get(Type::getInt32Ty(Context), V));
- return MDNode::get(Context, Vals);
+ DEBUG(if (DisableInterleaving && Interleave.Value == 1) dbgs()
+ << "LV: Interleaving disabled by the pass manager\n");
}
/// Mark the loop L as already vectorized by setting the width to 1.
- void setAlreadyVectorized(Loop *L) {
- LLVMContext &Context = L->getHeader()->getContext();
-
- Width = 1;
-
- // Create a new loop id with one more operand for the already_vectorized
- // hint. If the loop already has a loop id then copy the existing operands.
- SmallVector<Value*, 4> Vals(1);
- if (LoopID)
- for (unsigned i = 1, ie = LoopID->getNumOperands(); i < ie; ++i)
- Vals.push_back(LoopID->getOperand(i));
-
- Vals.push_back(
- createHint(Context, Twine(Prefix(), "vectorize.width").str(), Width));
- Vals.push_back(
- createHint(Context, Twine(Prefix(), "interleave.count").str(), 1));
-
- MDNode *NewLoopID = MDNode::get(Context, Vals);
- // Set operand 0 to refer to the loop id itself.
- NewLoopID->replaceOperandWith(0, NewLoopID);
-
- L->setLoopID(NewLoopID);
- if (LoopID)
- LoopID->replaceAllUsesWith(NewLoopID);
-
- LoopID = NewLoopID;
+ void setAlreadyVectorized() {
+ Width.Value = Interleave.Value = 1;
+ Hint Hints[] = {Width, Interleave};
+ writeHintsToMetadata(Hints);
}
+ /// Dumps all the hint information.
std::string emitRemark() const {
Report R;
- if (Force == LoopVectorizeHints::FK_Disabled)
+ if (Force.Value == LoopVectorizeHints::FK_Disabled)
R << "vectorization is explicitly disabled";
else {
R << "use -Rpass-analysis=loop-vectorize for more info";
- if (Force == LoopVectorizeHints::FK_Enabled) {
+ if (Force.Value == LoopVectorizeHints::FK_Enabled) {
R << " (Force=true";
- if (Width != 0)
- R << ", Vector Width=" << Width;
- if (Unroll != 0)
- R << ", Interleave Count=" << Unroll;
+ if (Width.Value != 0)
+ R << ", Vector Width=" << Width.Value;
+ if (Interleave.Value != 0)
+ R << ", Interleave Count=" << Interleave.Value;
R << ")";
}
}
return R.str();
}
- unsigned getWidth() const { return Width; }
- unsigned getUnroll() const { return Unroll; }
- enum ForceKind getForce() const { return Force; }
- MDNode *getLoopID() const { return LoopID; }
+ unsigned getWidth() const { return Width.Value; }
+ unsigned getInterleave() const { return Interleave.Value; }
+ enum ForceKind getForce() const { return (ForceKind)Force.Value; }
private:
- /// Find hints specified in the loop metadata.
- void getHints(const Loop *L) {
+ /// Find hints specified in the loop metadata and update local values.
+ void getHintsFromMetadata() {
+ MDNode *LoopID = TheLoop->getLoopID();
if (!LoopID)
return;
for (unsigned i = 1, ie = LoopID->getNumOperands(); i < ie; ++i) {
const MDString *S = nullptr;
- SmallVector<Value*, 4> Args;
+ SmallVector<Metadata *, 4> Args;
// The expected hint is either a MDString or a MDNode with the first
// operand a MDString.
continue;
// Check if the hint starts with the loop metadata prefix.
- StringRef Hint = S->getString();
- if (!Hint.startswith(Prefix()))
- continue;
- // Remove the prefix.
- Hint = Hint.substr(Prefix().size(), StringRef::npos);
-
+ StringRef Name = S->getString();
if (Args.size() == 1)
- getHint(Hint, Args[0]);
+ setHint(Name, Args[0]);
}
}
- // Check string hint with one operand.
- void getHint(StringRef Hint, Value *Arg) {
- const ConstantInt *C = dyn_cast<ConstantInt>(Arg);
+ /// Checks string hint with one operand and set value if valid.
+ void setHint(StringRef Name, Metadata *Arg) {
+ if (!Name.startswith(Prefix()))
+ return;
+ Name = Name.substr(Prefix().size(), StringRef::npos);
+
+ const ConstantInt *C = mdconst::dyn_extract<ConstantInt>(Arg);
if (!C) return;
unsigned Val = C->getZExtValue();
- if (Hint == "vectorize.width") {
- if (isPowerOf2_32(Val) && Val <= MaxVectorWidth)
- Width = Val;
- else
- DEBUG(dbgs() << "LV: ignoring invalid width hint metadata\n");
- } else if (Hint == "vectorize.enable") {
- if (C->getBitWidth() == 1)
- Force = Val == 1 ? LoopVectorizeHints::FK_Enabled
- : LoopVectorizeHints::FK_Disabled;
- else
- DEBUG(dbgs() << "LV: ignoring invalid enable hint metadata\n");
- } else if (Hint == "interleave.count") {
- if (isPowerOf2_32(Val) && Val <= MaxUnrollFactor)
- Unroll = Val;
- else
- DEBUG(dbgs() << "LV: ignoring invalid unroll hint metadata\n");
- } else {
- DEBUG(dbgs() << "LV: ignoring unknown hint " << Hint << '\n');
+ Hint *Hints[] = {&Width, &Interleave, &Force};
+ for (auto H : Hints) {
+ if (Name == H->Name) {
+ if (H->validate(Val))
+ H->Value = Val;
+ else
+ DEBUG(dbgs() << "LV: ignoring invalid hint '" << Name << "'\n");
+ break;
+ }
}
}
- /// Vectorization width.
- unsigned Width;
- /// Vectorization unroll factor.
- unsigned Unroll;
- /// Vectorization forced
- enum ForceKind Force;
+ /// Create a new hint from name / value pair.
+ MDNode *createHintMetadata(StringRef Name, unsigned V) const {
+ LLVMContext &Context = TheLoop->getHeader()->getContext();
+ Metadata *MDs[] = {MDString::get(Context, Name),
+ ConstantAsMetadata::get(
+ ConstantInt::get(Type::getInt32Ty(Context), V))};
+ return MDNode::get(Context, MDs);
+ }
+
+ /// Matches metadata with hint name.
+ bool matchesHintMetadataName(MDNode *Node, ArrayRef<Hint> HintTypes) {
+ MDString* Name = dyn_cast<MDString>(Node->getOperand(0));
+ if (!Name)
+ return false;
+
+ for (auto H : HintTypes)
+ if (Name->getString().endswith(H.Name))
+ return true;
+ return false;
+ }
- MDNode *LoopID;
+ /// Sets current hints into loop metadata, keeping other values intact.
+ void writeHintsToMetadata(ArrayRef<Hint> HintTypes) {
+ if (HintTypes.size() == 0)
+ return;
+
+ // Reserve the first element to LoopID (see below).
+ SmallVector<Metadata *, 4> MDs(1);
+ // If the loop already has metadata, then ignore the existing operands.
+ MDNode *LoopID = TheLoop->getLoopID();
+ if (LoopID) {
+ for (unsigned i = 1, ie = LoopID->getNumOperands(); i < ie; ++i) {
+ MDNode *Node = cast<MDNode>(LoopID->getOperand(i));
+ // If node in update list, ignore old value.
+ if (!matchesHintMetadataName(Node, HintTypes))
+ MDs.push_back(Node);
+ }
+ }
+
+ // Now, add the missing hints.
+ for (auto H : HintTypes)
+ MDs.push_back(createHintMetadata(Twine(Prefix(), H.Name).str(), H.Value));
+
+ // Replace current metadata node with new one.
+ LLVMContext &Context = TheLoop->getHeader()->getContext();
+ MDNode *NewLoopID = MDNode::get(Context, MDs);
+ // Set operand 0 to refer to the loop id itself.
+ NewLoopID->replaceOperandWith(0, NewLoopID);
+
+ TheLoop->setLoopID(NewLoopID);
+ }
+
+ /// The loop these hints belong to.
+ const Loop *TheLoop;
};
static void emitMissedWarning(Function *F, Loop *L,
emitLoopVectorizeWarning(
F->getContext(), *F, L->getStartLoc(),
"failed explicitly specified loop vectorization");
- else if (LH.getUnroll() != 1)
+ else if (LH.getInterleave() != 1)
emitLoopInterleaveWarning(
F->getContext(), *F, L->getStartLoc(),
"failed explicitly specified loop interleaving");
BlockFrequencyInfo *BFI;
TargetLibraryInfo *TLI;
AliasAnalysis *AA;
+ AssumptionCache *AC;
bool DisableUnrolling;
bool AlwaysVectorize;
SE = &getAnalysis<ScalarEvolution>();
DataLayoutPass *DLP = getAnalysisIfAvailable<DataLayoutPass>();
DL = DLP ? &DLP->getDataLayout() : nullptr;
- LI = &getAnalysis<LoopInfo>();
- TTI = &getAnalysis<TargetTransformInfo>();
+ LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
+ TTI = &getAnalysis<TargetTransformInfoWrapperPass>().getTTI();
DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
BFI = &getAnalysis<BlockFrequencyInfo>();
- TLI = getAnalysisIfAvailable<TargetLibraryInfo>();
+ auto *TLIP = getAnalysisIfAvailable<TargetLibraryInfoWrapperPass>();
+ TLI = TLIP ? &TLIP->getTLI() : nullptr;
AA = &getAnalysis<AliasAnalysis>();
+ AC = &getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F);
// Compute some weights outside of the loop over the loops. Compute this
// using a BranchProbability to re-use its scaling math.
: (Hints.getForce() == LoopVectorizeHints::FK_Enabled
? "enabled"
: "?")) << " width=" << Hints.getWidth()
- << " unroll=" << Hints.getUnroll() << "\n");
+ << " unroll=" << Hints.getInterleave() << "\n");
// Function containing loop
Function *F = L->getHeader()->getParent();
return false;
}
- if (Hints.getWidth() == 1 && Hints.getUnroll() == 1) {
+ if (Hints.getWidth() == 1 && Hints.getInterleave() == 1) {
DEBUG(dbgs() << "LV: Not vectorizing: Disabled/already vectorized.\n");
emitOptimizationRemarkAnalysis(
F->getContext(), DEBUG_TYPE, *F, L->getStartLoc(),
// Check the loop for a trip count threshold:
// do not vectorize loops with a tiny trip count.
- BasicBlock *Latch = L->getLoopLatch();
- const unsigned TC = SE->getSmallConstantTripCount(L, Latch);
+ const unsigned TC = SE->getSmallConstantTripCount(L);
if (TC > 0u && TC < TinyTripCountVectorThreshold) {
DEBUG(dbgs() << "LV: Found a loop with a very small trip count. "
<< "This loop is not worth vectorizing.");
}
// Check if it is legal to vectorize the loop.
- LoopVectorizationLegality LVL(L, SE, DL, DT, TLI, AA, F);
+ LoopVectorizationLegality LVL(L, SE, DL, DT, TLI, AA, F, TTI);
if (!LVL.canVectorize()) {
DEBUG(dbgs() << "LV: Not vectorizing: Cannot prove legality.\n");
emitMissedWarning(F, L, Hints);
}
// Use the cost model.
- LoopVectorizationCostModel CM(L, SE, LI, &LVL, *TTI, DL, TLI, F, &Hints);
+ LoopVectorizationCostModel CM(L, SE, LI, &LVL, *TTI, DL, TLI, AC, F,
+ &Hints);
// Check the function attributes to find out if this function should be
// optimized for size.
}
// Mark the loop as already vectorized to avoid vectorizing again.
- Hints.setAlreadyVectorized(L);
+ Hints.setAlreadyVectorized();
DEBUG(verifyFunction(*L->getHeader()->getParent()));
return true;
}
void getAnalysisUsage(AnalysisUsage &AU) const override {
+ AU.addRequired<AssumptionCacheTracker>();
AU.addRequiredID(LoopSimplifyID);
AU.addRequiredID(LCSSAID);
AU.addRequired<BlockFrequencyInfo>();
AU.addRequired<DominatorTreeWrapperPass>();
- AU.addRequired<LoopInfo>();
+ AU.addRequired<LoopInfoWrapperPass>();
AU.addRequired<ScalarEvolution>();
- AU.addRequired<TargetTransformInfo>();
+ AU.addRequired<TargetTransformInfoWrapperPass>();
AU.addRequired<AliasAnalysis>();
- AU.addPreserved<LoopInfo>();
+ AU.addPreserved<LoopInfoWrapperPass>();
AU.addPreserved<DominatorTreeWrapperPass>();
AU.addPreserved<AliasAnalysis>();
}
return Shuf;
}
-Value *InnerLoopVectorizer::getConsecutiveVector(Value* Val, int StartIdx,
- bool Negate) {
+Value *InnerLoopVectorizer::getStepVector(Value *Val, int StartIdx,
+ Value *Step) {
assert(Val->getType()->isVectorTy() && "Must be a vector");
assert(Val->getType()->getScalarType()->isIntegerTy() &&
"Elem must be an integer");
+ assert(Step->getType() == Val->getType()->getScalarType() &&
+ "Step has wrong type");
// Create the types.
Type *ITy = Val->getType()->getScalarType();
VectorType *Ty = cast<VectorType>(Val->getType());
SmallVector<Constant*, 8> Indices;
// Create a vector of consecutive numbers from zero to VF.
- for (int i = 0; i < VLen; ++i) {
- int64_t Idx = Negate ? (-i) : i;
- Indices.push_back(ConstantInt::get(ITy, StartIdx + Idx, Negate));
- }
+ for (int i = 0; i < VLen; ++i)
+ Indices.push_back(ConstantInt::get(ITy, StartIdx + i));
// Add the consecutive indices to the vector value.
Constant *Cv = ConstantVector::get(Indices);
assert(Cv->getType() == Val->getType() && "Invalid consecutive vec");
- return Builder.CreateAdd(Val, Cv, "induction");
+ Step = Builder.CreateVectorSplat(VLen, Step);
+ assert(Step->getType() == Val->getType() && "Invalid step vec");
+ // FIXME: The newly created binary instructions should contain nsw/nuw flags,
+ // which can be found from the original scalar operations.
+ Step = Builder.CreateMul(Cv, Step);
+ return Builder.CreateAdd(Val, Step, "induction");
}
/// \brief Find the operand of the GEP that should be checked for consecutive
PHINode *Phi = dyn_cast_or_null<PHINode>(Ptr);
if (Phi && Inductions.count(Phi)) {
InductionInfo II = Inductions[Phi];
- if (IK_PtrInduction == II.IK)
- return 1;
- else if (IK_ReversePtrInduction == II.IK)
- return -1;
+ return II.getConsecutiveDirection();
}
GetElementPtrInst *Gep = dyn_cast_or_null<GetElementPtrInst>(Ptr);
return 0;
InductionInfo II = Inductions[Phi];
- if (IK_PtrInduction == II.IK)
- return 1;
- else if (IK_ReversePtrInduction == II.IK)
- return -1;
+ return II.getConsecutiveDirection();
}
unsigned InductionOperand = getGEPInductionOperand(DL, Gep);
unsigned ScalarAllocatedSize = DL->getTypeAllocSize(ScalarDataTy);
unsigned VectorElementSize = DL->getTypeStoreSize(DataTy)/VF;
- if (SI && Legal->blockNeedsPredication(SI->getParent()))
+ if (SI && Legal->blockNeedsPredication(SI->getParent()) &&
+ !Legal->isMaskRequired(SI))
return scalarizeInstruction(Instr, true);
if (ScalarAllocatedSize != VectorElementSize)
Ptr = Builder.CreateExtractElement(PtrVal[0], Zero);
}
+ VectorParts Mask = createBlockInMask(Instr->getParent());
// Handle Stores:
if (SI) {
assert(!Legal->isUniform(SI->getPointerOperand()) &&
// We don't want to update the value in the map as it might be used in
// another expression. So don't use a reference type for "StoredVal".
VectorParts StoredVal = getVectorValue(SI->getValueOperand());
-
+
for (unsigned Part = 0; Part < UF; ++Part) {
// Calculate the pointer for the specific unroll-part.
Value *PartPtr = Builder.CreateGEP(Ptr, Builder.getInt32(Part * VF));
// wide store needs to start at the last vector element.
PartPtr = Builder.CreateGEP(Ptr, Builder.getInt32(-Part * VF));
PartPtr = Builder.CreateGEP(PartPtr, Builder.getInt32(1 - VF));
+ Mask[Part] = reverseVector(Mask[Part]);
}
Value *VecPtr = Builder.CreateBitCast(PartPtr,
DataTy->getPointerTo(AddressSpace));
- StoreInst *NewSI =
- Builder.CreateAlignedStore(StoredVal[Part], VecPtr, Alignment);
+
+ Instruction *NewSI;
+ if (Legal->isMaskRequired(SI))
+ NewSI = Builder.CreateMaskedStore(StoredVal[Part], VecPtr, Alignment,
+ Mask[Part]);
+ else
+ NewSI = Builder.CreateAlignedStore(StoredVal[Part], VecPtr, Alignment);
propagateMetadata(NewSI, SI);
}
return;
if (Reverse) {
// If the address is consecutive but reversed, then the
- // wide store needs to start at the last vector element.
+ // wide load needs to start at the last vector element.
PartPtr = Builder.CreateGEP(Ptr, Builder.getInt32(-Part * VF));
PartPtr = Builder.CreateGEP(PartPtr, Builder.getInt32(1 - VF));
+ Mask[Part] = reverseVector(Mask[Part]);
}
+ Instruction* NewLI;
Value *VecPtr = Builder.CreateBitCast(PartPtr,
DataTy->getPointerTo(AddressSpace));
- LoadInst *NewLI = Builder.CreateAlignedLoad(VecPtr, Alignment, "wide.load");
+ if (Legal->isMaskRequired(LI))
+ NewLI = Builder.CreateMaskedLoad(VecPtr, Alignment, Mask[Part],
+ UndefValue::get(DataTy),
+ "wide.masked.load");
+ else
+ NewLI = Builder.CreateAlignedLoad(VecPtr, Alignment, "wide.load");
propagateMetadata(NewLI, LI);
Entry[Part] = Reverse ? reverseVector(NewLI) : NewLI;
}
Cmp = Builder.CreateICmp(ICmpInst::ICMP_EQ, Cmp, ConstantInt::get(Cmp->getType(), 1));
CondBlock = IfBlock->splitBasicBlock(InsertPt, "cond.store");
LoopVectorBody.push_back(CondBlock);
- VectorLp->addBasicBlockToLoop(CondBlock, LI->getBase());
+ VectorLp->addBasicBlockToLoop(CondBlock, *LI);
// Update Builder with newly created basic block.
Builder.SetInsertPoint(InsertPt);
}
if (IfPredicateStore) {
BasicBlock *NewIfBlock = CondBlock->splitBasicBlock(InsertPt, "else");
LoopVectorBody.push_back(NewIfBlock);
- VectorLp->addBasicBlockToLoop(NewIfBlock, LI->getBase());
+ VectorLp->addBasicBlockToLoop(NewIfBlock, *LI);
Builder.SetInsertPoint(InsertPt);
Instruction *OldBr = IfBlock->getTerminator();
BranchInst::Create(CondBlock, NewIfBlock, Cmp, OldBr);
// before calling any utilities such as SCEV that require valid LoopInfo.
if (ParentLoop) {
ParentLoop->addChildLoop(Lp);
- ParentLoop->addBasicBlockToLoop(ScalarPH, LI->getBase());
- ParentLoop->addBasicBlockToLoop(VectorPH, LI->getBase());
- ParentLoop->addBasicBlockToLoop(MiddleBlock, LI->getBase());
+ ParentLoop->addBasicBlockToLoop(ScalarPH, *LI);
+ ParentLoop->addBasicBlockToLoop(VectorPH, *LI);
+ ParentLoop->addBasicBlockToLoop(MiddleBlock, *LI);
} else {
LI->addTopLevelLoop(Lp);
}
- Lp->addBasicBlockToLoop(VecBody, LI->getBase());
+ Lp->addBasicBlockToLoop(VecBody, *LI);
// Use this IR builder to create the loop instructions (Phi, Br, Cmp)
// inside the loop.
BasicBlock *CheckBlock =
LastBypassBlock->splitBasicBlock(PastOverflowCheck, "overflow.checked");
if (ParentLoop)
- ParentLoop->addBasicBlockToLoop(CheckBlock, LI->getBase());
+ ParentLoop->addBasicBlockToLoop(CheckBlock, *LI);
LoopBypassBlocks.push_back(CheckBlock);
Instruction *OldTerm = LastBypassBlock->getTerminator();
BranchInst::Create(ScalarPH, CheckBlock, CheckBCOverflow, OldTerm);
BasicBlock *CheckBlock =
LastBypassBlock->splitBasicBlock(FirstCheckInst, "vector.stridecheck");
if (ParentLoop)
- ParentLoop->addBasicBlockToLoop(CheckBlock, LI->getBase());
+ ParentLoop->addBasicBlockToLoop(CheckBlock, *LI);
LoopBypassBlocks.push_back(CheckBlock);
// Replace the branch into the memory check block with a conditional branch
BasicBlock *CheckBlock =
LastBypassBlock->splitBasicBlock(MemRuntimeCheck, "vector.memcheck");
if (ParentLoop)
- ParentLoop->addBasicBlockToLoop(CheckBlock, LI->getBase());
+ ParentLoop->addBasicBlockToLoop(CheckBlock, *LI);
LoopBypassBlocks.push_back(CheckBlock);
// Replace the branch into the memory check block with a conditional branch
Value *CRD = BypassBuilder.CreateSExtOrTrunc(CountRoundDown,
II.StartValue->getType(),
"cast.crd");
- EndValue = BypassBuilder.CreateAdd(CRD, II.StartValue , "ind.end");
- break;
- }
- case LoopVectorizationLegality::IK_ReverseIntInduction: {
- // Convert the CountRoundDown variable to the PHI size.
- Value *CRD = BypassBuilder.CreateSExtOrTrunc(CountRoundDown,
- II.StartValue->getType(),
- "cast.crd");
- // Handle reverse integer induction counter.
- EndValue = BypassBuilder.CreateSub(II.StartValue, CRD, "rev.ind.end");
+ EndValue = II.transform(BypassBuilder, CRD);
+ EndValue->setName("ind.end");
break;
}
case LoopVectorizationLegality::IK_PtrInduction: {
- // For pointer induction variables, calculate the offset using
- // the end index.
- EndValue = BypassBuilder.CreateGEP(II.StartValue, CountRoundDown,
- "ptr.ind.end");
- break;
- }
- case LoopVectorizationLegality::IK_ReversePtrInduction: {
- // The value at the end of the loop for the reverse pointer is calculated
- // by creating a GEP with a negative index starting from the start value.
- Value *Zero = ConstantInt::get(CountRoundDown->getType(), 0);
- Value *NegIdx = BypassBuilder.CreateSub(Zero, CountRoundDown,
- "rev.ind.end");
- EndValue = BypassBuilder.CreateGEP(II.StartValue, NegIdx,
- "rev.ptr.ind.end");
+ EndValue = II.transform(BypassBuilder, CountRoundDown);
+ EndValue->setName("ptr.ind.end");
break;
}
}// end of case
LoopScalarBody = OldBasicBlock;
LoopVectorizeHints Hints(Lp, true);
- Hints.setAlreadyVectorized(Lp);
+ Hints.setAlreadyVectorized();
}
/// This function returns the identity element (or neutral element) for
}
// Fix the vector-loop phi.
- // We created the induction variable so we know that the
- // preheader is the first entry.
- BasicBlock *VecPreheader = Induction->getIncomingBlock(0);
// Reductions do not have to start at zero. They can start with
// any loop invariant values.
// Make sure to add the reduction stat value only to the
// first unroll part.
Value *StartVal = (part == 0) ? VectorStart : Identity;
- cast<PHINode>(VecRdxPhi[part])->addIncoming(StartVal, VecPreheader);
+ cast<PHINode>(VecRdxPhi[part])->addIncoming(StartVal,
+ LoopVectorPreHeader);
cast<PHINode>(VecRdxPhi[part])->addIncoming(Val[part],
LoopVectorBody.back());
}
LCSSAPhi->addIncoming(UndefValue::get(LCSSAPhi->getType()),
LoopMiddleBlock);
}
-}
+}
InnerLoopVectorizer::VectorParts
InnerLoopVectorizer::createEdgeMask(BasicBlock *Src, BasicBlock *Dst) {
LoopVectorizationLegality::InductionInfo II =
Legal->getInductionVars()->lookup(P);
+ // FIXME: The newly created binary instructions should contain nsw/nuw flags,
+ // which can be found from the original scalar operations.
switch (II.IK) {
case LoopVectorizationLegality::IK_NoInduction:
llvm_unreachable("Unknown induction");
Value *NormalizedIdx = Builder.CreateSub(Induction, ExtendedIdx,
"normalized.idx");
NormalizedIdx = Builder.CreateSExtOrTrunc(NormalizedIdx, PhiTy);
- Broadcasted = Builder.CreateAdd(II.StartValue, NormalizedIdx,
- "offset.idx");
+ Broadcasted = II.transform(Builder, NormalizedIdx);
+ Broadcasted->setName("offset.idx");
}
Broadcasted = getBroadcastInstrs(Broadcasted);
// After broadcasting the induction variable we need to make the vector
// consecutive by adding 0, 1, 2, etc.
for (unsigned part = 0; part < UF; ++part)
- Entry[part] = getConsecutiveVector(Broadcasted, VF * part, false);
+ Entry[part] = getStepVector(Broadcasted, VF * part, II.StepValue);
return;
}
- case LoopVectorizationLegality::IK_ReverseIntInduction:
case LoopVectorizationLegality::IK_PtrInduction:
- case LoopVectorizationLegality::IK_ReversePtrInduction:
- // Handle reverse integer and pointer inductions.
- Value *StartIdx = ExtendedIdx;
- // This is the normalized GEP that starts counting at zero.
- Value *NormalizedIdx = Builder.CreateSub(Induction, StartIdx,
- "normalized.idx");
-
- // Handle the reverse integer induction variable case.
- if (LoopVectorizationLegality::IK_ReverseIntInduction == II.IK) {
- IntegerType *DstTy = cast<IntegerType>(II.StartValue->getType());
- Value *CNI = Builder.CreateSExtOrTrunc(NormalizedIdx, DstTy,
- "resize.norm.idx");
- Value *ReverseInd = Builder.CreateSub(II.StartValue, CNI,
- "reverse.idx");
-
- // This is a new value so do not hoist it out.
- Value *Broadcasted = getBroadcastInstrs(ReverseInd);
- // After broadcasting the induction variable we need to make the
- // vector consecutive by adding ... -3, -2, -1, 0.
- for (unsigned part = 0; part < UF; ++part)
- Entry[part] = getConsecutiveVector(Broadcasted, -(int)VF * part,
- true);
- return;
- }
-
// Handle the pointer induction variable case.
assert(P->getType()->isPointerTy() && "Unexpected type.");
-
- // Is this a reverse induction ptr or a consecutive induction ptr.
- bool Reverse = (LoopVectorizationLegality::IK_ReversePtrInduction ==
- II.IK);
-
+ // This is the normalized GEP that starts counting at zero.
+ Value *NormalizedIdx =
+ Builder.CreateSub(Induction, ExtendedIdx, "normalized.idx");
// This is the vector of results. Notice that we don't generate
// vector geps because scalar geps result in better code.
for (unsigned part = 0; part < UF; ++part) {
if (VF == 1) {
- int EltIndex = (part) * (Reverse ? -1 : 1);
+ int EltIndex = part;
Constant *Idx = ConstantInt::get(Induction->getType(), EltIndex);
- Value *GlobalIdx;
- if (Reverse)
- GlobalIdx = Builder.CreateSub(Idx, NormalizedIdx, "gep.ridx");
- else
- GlobalIdx = Builder.CreateAdd(NormalizedIdx, Idx, "gep.idx");
-
- Value *SclrGep = Builder.CreateGEP(II.StartValue, GlobalIdx,
- "next.gep");
+ Value *GlobalIdx = Builder.CreateAdd(NormalizedIdx, Idx);
+ Value *SclrGep = II.transform(Builder, GlobalIdx);
+ SclrGep->setName("next.gep");
Entry[part] = SclrGep;
continue;
}
Value *VecVal = UndefValue::get(VectorType::get(P->getType(), VF));
for (unsigned int i = 0; i < VF; ++i) {
- int EltIndex = (i + part * VF) * (Reverse ? -1 : 1);
+ int EltIndex = i + part * VF;
Constant *Idx = ConstantInt::get(Induction->getType(), EltIndex);
- Value *GlobalIdx;
- if (!Reverse)
- GlobalIdx = Builder.CreateAdd(NormalizedIdx, Idx, "gep.idx");
- else
- GlobalIdx = Builder.CreateSub(Idx, NormalizedIdx, "gep.ridx");
-
- Value *SclrGep = Builder.CreateGEP(II.StartValue, GlobalIdx,
- "next.gep");
+ Value *GlobalIdx = Builder.CreateAdd(NormalizedIdx, Idx);
+ Value *SclrGep = II.transform(Builder, GlobalIdx);
+ SclrGep->setName("next.gep");
VecVal = Builder.CreateInsertElement(VecVal, SclrGep,
Builder.getInt32(i),
"insert.gep");
// Nothing to do for PHIs and BR, since we already took care of the
// loop control flow instructions.
continue;
- case Instruction::PHI:{
+ case Instruction::PHI: {
// Vectorize PHINodes.
widenPHIInstruction(it, Entry, UF, VF, PV);
continue;
for (unsigned Part = 0; Part < UF; ++Part) {
Value *V = Builder.CreateBinOp(BinOp->getOpcode(), A[Part], B[Part]);
- // Update the NSW, NUW and Exact flags. Notice: V can be an Undef.
- BinaryOperator *VecOp = dyn_cast<BinaryOperator>(V);
- if (VecOp && isa<OverflowingBinaryOperator>(BinOp)) {
- VecOp->setHasNoSignedWrap(BinOp->hasNoSignedWrap());
- VecOp->setHasNoUnsignedWrap(BinOp->hasNoUnsignedWrap());
- }
- if (VecOp && isa<PossiblyExactOperator>(VecOp))
- VecOp->setIsExact(BinOp->isExact());
-
- // Copy the fast-math flags.
- if (VecOp && isa<FPMathOperator>(V))
- VecOp->setFastMathFlags(it->getFastMathFlags());
+ if (BinaryOperator *VecOp = dyn_cast<BinaryOperator>(V))
+ VecOp->copyIRFlags(BinOp);
Entry[Part] = V;
}
Value *ScalarCast = Builder.CreateCast(CI->getOpcode(), Induction,
CI->getType());
Value *Broadcasted = getBroadcastInstrs(ScalarCast);
+ LoopVectorizationLegality::InductionInfo II =
+ Legal->getInductionVars()->lookup(OldInduction);
+ Constant *Step =
+ ConstantInt::getSigned(CI->getType(), II.StepValue->getSExtValue());
for (unsigned Part = 0; Part < UF; ++Part)
- Entry[Part] = getConsecutiveVector(Broadcasted, VF * Part, false);
+ Entry[Part] = getStepVector(Broadcasted, VF * Part, Step);
propagateMetadata(Entry, it);
break;
}
Intrinsic::ID ID = getIntrinsicIDForCall(CI, TLI);
assert(ID && "Not an intrinsic call!");
switch (ID) {
+ case Intrinsic::assume:
case Intrinsic::lifetime_end:
case Intrinsic::lifetime_start:
scalarizeInstruction(it);
DT->addNewBlock(LoopMiddleBlock, LoopBypassBlocks[1]);
DT->addNewBlock(LoopScalarPreHeader, LoopBypassBlocks[0]);
DT->changeImmediateDominator(LoopScalarBody, LoopScalarPreHeader);
- DT->changeImmediateDominator(LoopExitBlock, LoopMiddleBlock);
+ DT->changeImmediateDominator(LoopExitBlock, LoopBypassBlocks[0]);
DEBUG(DT->verifyDomTree());
}
}
// We can only vectorize innermost loops.
- if (TheLoop->getSubLoopsVector().size()) {
+ if (!TheLoop->getSubLoopsVector().empty()) {
emitAnalysis(Report() << "loop is not the innermost loop");
return false;
}
return false;
}
+ // We only handle bottom-tested loops, i.e. loop in which the condition is
+ // checked at the end of each iteration. With that we can assume that all
+ // instructions in the loop are executed the same number of times.
+ if (TheLoop->getExitingBlock() != TheLoop->getLoopLatch()) {
+ emitAnalysis(
+ Report() << "loop control flow is not understood by vectorizer");
+ return false;
+ }
+
// We need to have a loop header.
DEBUG(dbgs() << "LV: Found a loop: " <<
TheLoop->getHeader()->getName() << '\n');
/// \brief Check that the instruction has outside loop users and is not an
/// identified reduction variable.
static bool hasOutsideLoopUser(const Loop *TheLoop, Instruction *Inst,
- SmallPtrSet<Value *, 4> &Reductions) {
+ SmallPtrSetImpl<Value *> &Reductions) {
// Reduction instructions are allowed to have exit users. All other
// instructions must not have external users.
if (!Reductions.count(Inst))
return false;
}
- // We only allow if-converted PHIs with more than two incoming values.
+ // We only allow if-converted PHIs with exactly two incoming values.
if (Phi->getNumIncomingValues() != 2) {
emitAnalysis(Report(it)
<< "control flow not understood by vectorizer");
// This is the value coming from the preheader.
Value *StartValue = Phi->getIncomingValueForBlock(PreHeader);
+ ConstantInt *StepValue = nullptr;
// Check if this is an induction variable.
- InductionKind IK = isInductionVariable(Phi);
+ InductionKind IK = isInductionVariable(Phi, StepValue);
if (IK_NoInduction != IK) {
// Get the widest type.
WidestIndTy = getWiderType(*DL, PhiTy, WidestIndTy);
// Int inductions are special because we only allow one IV.
- if (IK == IK_IntInduction) {
+ if (IK == IK_IntInduction && StepValue->isOne()) {
// Use the phi node with the widest type as induction. Use the last
// one if there are multiple (no good reason for doing this other
// than it is expedient).
}
DEBUG(dbgs() << "LV: Found an induction variable.\n");
- Inductions[Phi] = InductionInfo(StartValue, IK);
+ Inductions[Phi] = InductionInfo(StartValue, IK, StepValue);
// Until we explicitly handle the case of an induction variable with
// an outside loop user we have to give up vectorizing this loop.
return false;
}
if (EnableMemAccessVersioning)
- collectStridedAcccess(ST);
+ collectStridedAccess(ST);
}
if (EnableMemAccessVersioning)
if (LoadInst *LI = dyn_cast<LoadInst>(it))
- collectStridedAcccess(LI);
+ collectStridedAccess(LI);
// Reduction instructions are allowed to have exit users.
// All other instructions must not have external users.
return Stride;
}
-void LoopVectorizationLegality::collectStridedAcccess(Value *MemAccess) {
+void LoopVectorizationLegality::collectStridedAccess(Value *MemAccess) {
Value *Ptr = nullptr;
if (LoadInst *LI = dyn_cast<LoadInst>(MemAccess))
Ptr = LI->getPointerOperand();
if (I->getType()->isPointerTy() && isConsecutivePtr(I))
Worklist.insert(Worklist.end(), I->op_begin(), I->op_end());
- while (Worklist.size()) {
+ while (!Worklist.empty()) {
Instruction *I = dyn_cast<Instruction>(Worklist.back());
Worklist.pop_back();
bool UseDeferred = SetIteration > 0;
PtrAccessSet &S = UseDeferred ? DeferredAccesses : Accesses;
- for (auto A : AS) {
- Value *Ptr = A.getValue();
- bool IsWrite = S.count(MemAccessInfo(Ptr, true));
+ for (auto AV : AS) {
+ Value *Ptr = AV.getValue();
- // If we're using the deferred access set, then it contains only reads.
- bool IsReadOnlyPtr = ReadOnlyPtr.count(Ptr) && !IsWrite;
- if (UseDeferred && !IsReadOnlyPtr)
- continue;
- // Otherwise, the pointer must be in the PtrAccessSet, either as a read
- // or a write.
- assert(((IsReadOnlyPtr && UseDeferred) || IsWrite ||
- S.count(MemAccessInfo(Ptr, false))) &&
- "Alias-set pointer not in the access set?");
-
- MemAccessInfo Access(Ptr, IsWrite);
- DepCands.insert(Access);
-
- // Memorize read-only pointers for later processing and skip them in the
- // first round (they need to be checked after we have seen all write
- // pointers). Note: we also mark pointer that are not consecutive as
- // "read-only" pointers (so that we check "a[b[i]] +="). Hence, we need
- // the second check for "!IsWrite".
- if (!UseDeferred && IsReadOnlyPtr) {
- DeferredAccesses.insert(Access);
- continue;
- }
+ // For a single memory access in AliasSetTracker, Accesses may contain
+ // both read and write, and they both need to be handled for CheckDeps.
+ for (auto AC : S) {
+ if (AC.getPointer() != Ptr)
+ continue;
- // If this is a write - check other reads and writes for conflicts. If
- // this is a read only check other writes for conflicts (but only if
- // there is no other write to the ptr - this is an optimization to
- // catch "a[i] = a[i] + " without having to do a dependence check).
- if ((IsWrite || IsReadOnlyPtr) && SetHasWrite) {
- CheckDeps.insert(Access);
- IsRTCheckNeeded = true;
- }
+ bool IsWrite = AC.getInt();
+
+ // If we're using the deferred access set, then it contains only
+ // reads.
+ bool IsReadOnlyPtr = ReadOnlyPtr.count(Ptr) && !IsWrite;
+ if (UseDeferred && !IsReadOnlyPtr)
+ continue;
+ // Otherwise, the pointer must be in the PtrAccessSet, either as a
+ // read or a write.
+ assert(((IsReadOnlyPtr && UseDeferred) || IsWrite ||
+ S.count(MemAccessInfo(Ptr, false))) &&
+ "Alias-set pointer not in the access set?");
+
+ MemAccessInfo Access(Ptr, IsWrite);
+ DepCands.insert(Access);
+
+ // Memorize read-only pointers for later processing and skip them in
+ // the first round (they need to be checked after we have seen all
+ // write pointers). Note: we also mark pointer that are not
+ // consecutive as "read-only" pointers (so that we check
+ // "a[b[i]] +="). Hence, we need the second check for "!IsWrite".
+ if (!UseDeferred && IsReadOnlyPtr) {
+ DeferredAccesses.insert(Access);
+ continue;
+ }
- if (IsWrite)
- SetHasWrite = true;
-
- // Create sets of pointers connected by a shared alias set and
- // underlying object.
- typedef SmallVector<Value*, 16> ValueVector;
- ValueVector TempObjects;
- GetUnderlyingObjects(Ptr, TempObjects, DL);
- for (Value *UnderlyingObj : TempObjects) {
- UnderlyingObjToAccessMap::iterator Prev =
- ObjToLastAccess.find(UnderlyingObj);
- if (Prev != ObjToLastAccess.end())
- DepCands.unionSets(Access, Prev->second);
-
- ObjToLastAccess[UnderlyingObj] = Access;
+ // If this is a write - check other reads and writes for conflicts. If
+ // this is a read only check other writes for conflicts (but only if
+ // there is no other write to the ptr - this is an optimization to
+ // catch "a[i] = a[i] + " without having to do a dependence check).
+ if ((IsWrite || IsReadOnlyPtr) && SetHasWrite) {
+ CheckDeps.insert(Access);
+ IsRTCheckNeeded = true;
+ }
+
+ if (IsWrite)
+ SetHasWrite = true;
+
+ // Create sets of pointers connected by a shared alias set and
+ // underlying object.
+ typedef SmallVector<Value *, 16> ValueVector;
+ ValueVector TempObjects;
+ GetUnderlyingObjects(Ptr, TempObjects, DL);
+ for (Value *UnderlyingObj : TempObjects) {
+ UnderlyingObjToAccessMap::iterator Prev =
+ ObjToLastAccess.find(UnderlyingObj);
+ if (Prev != ObjToLastAccess.end())
+ DepCands.unionSets(Access, Prev->second);
+
+ ObjToLastAccess[UnderlyingObj] = Access;
+ }
}
}
}
// Bail out early if passed-in parameters make vectorization not feasible.
unsigned ForcedFactor = VectorizationFactor ? VectorizationFactor : 1;
- unsigned ForcedUnroll = VectorizationUnroll ? VectorizationUnroll : 1;
+ unsigned ForcedUnroll = VectorizationInterleave ? VectorizationInterleave : 1;
// The distance must be bigger than the size needed for a vectorized version
// of the operation and the size of the vectorized operation must not be
// If we did *not* see this pointer before, insert it to the read-write
// list. At this phase it is only a 'write' list.
- if (Seen.insert(Ptr)) {
+ if (Seen.insert(Ptr).second) {
++NumReadWrites;
AliasAnalysis::Location Loc = AA->getLocation(ST);
// read a few words, modify, and write a few words, and some of the
// words may be written to the same address.
bool IsReadOnlyPtr = false;
- if (Seen.insert(Ptr) || !isStridedPtr(SE, DL, Ptr, TheLoop, Strides)) {
+ if (Seen.insert(Ptr).second ||
+ !isStridedPtr(SE, DL, Ptr, TheLoop, Strides)) {
++NumReads;
IsReadOnlyPtr = true;
}
}
static bool hasMultipleUsesOf(Instruction *I,
- SmallPtrSet<Instruction *, 8> &Insts) {
+ SmallPtrSetImpl<Instruction *> &Insts) {
unsigned NumUses = 0;
for(User::op_iterator Use = I->op_begin(), E = I->op_end(); Use != E; ++Use) {
if (Insts.count(dyn_cast<Instruction>(*Use)))
return false;
}
-static bool areAllUsesIn(Instruction *I, SmallPtrSet<Instruction *, 8> &Set) {
+static bool areAllUsesIn(Instruction *I, SmallPtrSetImpl<Instruction *> &Set) {
for(User::op_iterator Use = I->op_begin(), E = I->op_end(); Use != E; ++Use)
if (!Set.count(dyn_cast<Instruction>(*Use)))
return false;
// value must only be used once, except by phi nodes and min/max
// reductions which are represented as a cmp followed by a select.
ReductionInstDesc IgnoredVal(false, nullptr);
- if (VisitedInsts.insert(UI)) {
+ if (VisitedInsts.insert(UI).second) {
if (isa<PHINode>(UI))
PHIs.push_back(UI);
else
ReductionKind Kind,
ReductionInstDesc &Prev) {
bool FP = I->getType()->isFloatingPointTy();
- bool FastMath = (FP && I->isCommutative() && I->isAssociative());
+ bool FastMath = FP && I->hasUnsafeAlgebra();
switch (I->getOpcode()) {
default:
return ReductionInstDesc(false, I);
return ReductionInstDesc(Kind == RK_IntegerXor, I);
case Instruction::FMul:
return ReductionInstDesc(Kind == RK_FloatMult && FastMath, I);
+ case Instruction::FSub:
case Instruction::FAdd:
return ReductionInstDesc(Kind == RK_FloatAdd && FastMath, I);
case Instruction::FCmp:
}
LoopVectorizationLegality::InductionKind
-LoopVectorizationLegality::isInductionVariable(PHINode *Phi) {
+LoopVectorizationLegality::isInductionVariable(PHINode *Phi,
+ ConstantInt *&StepValue) {
Type *PhiTy = Phi->getType();
// We only handle integer and pointer inductions variables.
if (!PhiTy->isIntegerTy() && !PhiTy->isPointerTy())
DEBUG(dbgs() << "LV: PHI is not a poly recurrence.\n");
return IK_NoInduction;
}
- const SCEV *Step = AR->getStepRecurrence(*SE);
-
- // Integer inductions need to have a stride of one.
- if (PhiTy->isIntegerTy()) {
- if (Step->isOne())
- return IK_IntInduction;
- if (Step->isAllOnesValue())
- return IK_ReverseIntInduction;
- return IK_NoInduction;
- }
+ const SCEV *Step = AR->getStepRecurrence(*SE);
// Calculate the pointer stride and check if it is consecutive.
const SCEVConstant *C = dyn_cast<SCEVConstant>(Step);
if (!C)
return IK_NoInduction;
+ ConstantInt *CV = C->getValue();
+ if (PhiTy->isIntegerTy()) {
+ StepValue = CV;
+ return IK_IntInduction;
+ }
+
assert(PhiTy->isPointerTy() && "The PHI must be a pointer");
- uint64_t Size = DL->getTypeAllocSize(PhiTy->getPointerElementType());
- if (C->getValue()->equalsInt(Size))
- return IK_PtrInduction;
- else if (C->getValue()->equalsInt(0 - Size))
- return IK_ReversePtrInduction;
+ Type *PointerElementType = PhiTy->getPointerElementType();
+ // The pointer stride cannot be determined if the pointer element type is not
+ // sized.
+ if (!PointerElementType->isSized())
+ return IK_NoInduction;
- return IK_NoInduction;
+ int64_t Size = static_cast<int64_t>(DL->getTypeAllocSize(PointerElementType));
+ int64_t CVSize = CV->getSExtValue();
+ if (CVSize % Size)
+ return IK_NoInduction;
+ StepValue = ConstantInt::getSigned(CV->getType(), CVSize / Size);
+ return IK_PtrInduction;
}
bool LoopVectorizationLegality::isInductionVariable(const Value *V) {
}
bool LoopVectorizationLegality::blockCanBePredicated(BasicBlock *BB,
- SmallPtrSet<Value *, 8>& SafePtrs) {
+ SmallPtrSetImpl<Value *> &SafePtrs) {
+
for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
+ // Check that we don't have a constant expression that can trap as operand.
+ for (Instruction::op_iterator OI = it->op_begin(), OE = it->op_end();
+ OI != OE; ++OI) {
+ if (Constant *C = dyn_cast<Constant>(*OI))
+ if (C->canTrap())
+ return false;
+ }
// We might be able to hoist the load.
if (it->mayReadFromMemory()) {
LoadInst *LI = dyn_cast<LoadInst>(it);
- if (!LI || !SafePtrs.count(LI->getPointerOperand()))
+ if (!LI)
+ return false;
+ if (!SafePtrs.count(LI->getPointerOperand())) {
+ if (isLegalMaskedLoad(LI->getType(), LI->getPointerOperand())) {
+ MaskedOp.insert(LI);
+ continue;
+ }
return false;
+ }
}
// We don't predicate stores at the moment.
StoreInst *SI = dyn_cast<StoreInst>(it);
// We only support predication of stores in basic blocks with one
// predecessor.
- if (!SI || ++NumPredStores > NumberOfStoresToPredicate ||
- !SafePtrs.count(SI->getPointerOperand()) ||
- !SI->getParent()->getSinglePredecessor())
+ if (!SI)
return false;
+
+ bool isSafePtr = (SafePtrs.count(SI->getPointerOperand()) != 0);
+ bool isSinglePredecessor = SI->getParent()->getSinglePredecessor();
+
+ if (++NumPredStores > NumberOfStoresToPredicate || !isSafePtr ||
+ !isSinglePredecessor) {
+ // Build a masked store if it is legal for the target, otherwise scalarize
+ // the block.
+ bool isLegalMaskedOp =
+ isLegalMaskedStore(SI->getValueOperand()->getType(),
+ SI->getPointerOperand());
+ if (isLegalMaskedOp) {
+ --NumPredStores;
+ MaskedOp.insert(SI);
+ continue;
+ }
+ return false;
+ }
}
if (it->mayThrow())
return false;
- // Check that we don't have a constant expression that can trap as operand.
- for (Instruction::op_iterator OI = it->op_begin(), OE = it->op_end();
- OI != OE; ++OI) {
- if (Constant *C = dyn_cast<Constant>(*OI))
- if (C->canTrap())
- return false;
- }
-
// The instructions below can trap.
switch (it->getOpcode()) {
default: continue;
case Instruction::SDiv:
case Instruction::URem:
case Instruction::SRem:
- return false;
+ return false;
}
}
}
// Find the trip count.
- unsigned TC = SE->getSmallConstantTripCount(TheLoop, TheLoop->getLoopLatch());
+ unsigned TC = SE->getSmallConstantTripCount(TheLoop);
DEBUG(dbgs() << "LV: Found trip count: " << TC << '\n');
unsigned WidestType = getWidestType();
MaxVectorSize = 1;
}
- assert(MaxVectorSize <= 32 && "Did not expect to pack so many elements"
+ assert(MaxVectorSize <= 64 && "Did not expect to pack so many elements"
" into one vector!");
unsigned VF = MaxVectorSize;
// If the trip count that we found modulo the vectorization factor is not
// zero then we require a tail.
if (VF < 2) {
- emitAnalysis(Report() << "cannot optimize for size and vectorize at the same time. Enable vectorization of this loop with '#pragma clang loop vectorize(enable)' when compiling with -Os");
+ emitAnalysis(Report() << "cannot optimize for size and vectorize at the "
+ "same time. Enable vectorization of this loop "
+ "with '#pragma clang loop vectorize(enable)' "
+ "when compiling with -Os");
DEBUG(dbgs() << "LV: Aborting. A tail loop is required in Os.\n");
return Factor;
}
for (BasicBlock::iterator it = BB->begin(), e = BB->end(); it != e; ++it) {
Type *T = it->getType();
+ // Ignore ephemeral values.
+ if (EphValues.count(it))
+ continue;
+
// Only examine Loads, Stores and PHINodes.
if (!isa<LoadInst>(it) && !isa<StoreInst>(it) && !isa<PHINode>(it))
continue;
// -- The unroll heuristics --
// We unroll the loop in order to expose ILP and reduce the loop overhead.
// There are many micro-architectural considerations that we can't predict
- // at this level. For example frontend pressure (on decode or fetch) due to
+ // at this level. For example, frontend pressure (on decode or fetch) due to
// code size, or the number and capabilities of the execution ports.
//
// We use the following heuristics to select the unroll factor:
- // 1. If the code has reductions the we unroll in order to break the cross
+ // 1. If the code has reductions, then we unroll in order to break the cross
// iteration dependency.
- // 2. If the loop is really small then we unroll in order to reduce the loop
+ // 2. If the loop is really small, then we unroll in order to reduce the loop
// overhead.
// 3. We don't unroll if we think that we will spill registers to memory due
// to the increased register pressure.
// Use the user preference, unless 'auto' is selected.
- int UserUF = Hints->getUnroll();
+ int UserUF = Hints->getInterleave();
if (UserUF != 0)
return UserUF;
- // When we optimize for size we don't unroll.
+ // When we optimize for size, we don't unroll.
if (OptForSize)
return 1;
return 1;
// Do not unroll loops with a relatively small trip count.
- unsigned TC = SE->getSmallConstantTripCount(TheLoop,
- TheLoop->getLoopLatch());
+ unsigned TC = SE->getSmallConstantTripCount(TheLoop);
if (TC > 1 && TC < TinyTripCountUnrollThreshold)
return 1;
std::max(1U, (R.MaxLocalUsers - 1)));
// Clamp the unroll factor ranges to reasonable factors.
- unsigned MaxUnrollSize = TTI.getMaximumUnrollFactor();
+ unsigned MaxInterleaveSize = TTI.getMaxInterleaveFactor();
// Check if the user has overridden the unroll max.
if (VF == 1) {
- if (ForceTargetMaxScalarUnrollFactor.getNumOccurrences() > 0)
- MaxUnrollSize = ForceTargetMaxScalarUnrollFactor;
+ if (ForceTargetMaxScalarInterleaveFactor.getNumOccurrences() > 0)
+ MaxInterleaveSize = ForceTargetMaxScalarInterleaveFactor;
} else {
- if (ForceTargetMaxVectorUnrollFactor.getNumOccurrences() > 0)
- MaxUnrollSize = ForceTargetMaxVectorUnrollFactor;
+ if (ForceTargetMaxVectorInterleaveFactor.getNumOccurrences() > 0)
+ MaxInterleaveSize = ForceTargetMaxVectorInterleaveFactor;
}
// If we did not calculate the cost for VF (because the user selected the VF)
// Clamp the calculated UF to be between the 1 and the max unroll factor
// that the target allows.
- if (UF > MaxUnrollSize)
- UF = MaxUnrollSize;
+ if (UF > MaxInterleaveSize)
+ UF = MaxInterleaveSize;
else if (UF < 1)
UF = 1;
unsigned StoresUF = UF / (Legal->NumStores ? Legal->NumStores : 1);
unsigned LoadsUF = UF / (Legal->NumLoads ? Legal->NumLoads : 1);
+ // If we have a scalar reduction (vector reductions are already dealt with
+ // by this point), we can increase the critical path length if the loop
+ // we're unrolling is inside another loop. Limit, by default to 2, so the
+ // critical path only gets increased by one reduction operation.
+ if (Legal->getReductionVars()->size() &&
+ TheLoop->getLoopDepth() > 1) {
+ unsigned F = static_cast<unsigned>(MaxNestedScalarReductionUF);
+ SmallUF = std::min(SmallUF, F);
+ StoresUF = std::min(StoresUF, F);
+ LoadsUF = std::min(LoadsUF, F);
+ }
+
if (EnableLoadStoreRuntimeUnroll && std::max(StoresUF, LoadsUF) > SmallUF) {
DEBUG(dbgs() << "LV: Unrolling to saturate store or load ports.\n");
return std::max(StoresUF, LoadsUF);
// Ignore instructions that are never used within the loop.
if (!Ends.count(I)) continue;
+ // Ignore ephemeral values.
+ if (EphValues.count(I))
+ continue;
+
// Remove all of the instructions that end at this location.
InstrList &List = TransposeEnds[i];
for (unsigned int j=0, e = List.size(); j < e; ++j)
if (isa<DbgInfoIntrinsic>(it))
continue;
+ // Ignore ephemeral values.
+ if (EphValues.count(it))
+ continue;
+
unsigned C = getInstructionCost(it, VF);
// Check if we should override the cost.
TargetTransformInfo::OK_AnyValue;
TargetTransformInfo::OperandValueKind Op2VK =
TargetTransformInfo::OK_AnyValue;
+ TargetTransformInfo::OperandValueProperties Op1VP =
+ TargetTransformInfo::OP_None;
+ TargetTransformInfo::OperandValueProperties Op2VP =
+ TargetTransformInfo::OP_None;
Value *Op2 = I->getOperand(1);
// Check for a splat of a constant or for a non uniform vector of constants.
- if (isa<ConstantInt>(Op2))
+ if (isa<ConstantInt>(Op2)) {
+ ConstantInt *CInt = cast<ConstantInt>(Op2);
+ if (CInt && CInt->getValue().isPowerOf2())
+ Op2VP = TargetTransformInfo::OP_PowerOf2;
Op2VK = TargetTransformInfo::OK_UniformConstantValue;
- else if (isa<ConstantVector>(Op2) || isa<ConstantDataVector>(Op2)) {
+ } else if (isa<ConstantVector>(Op2) || isa<ConstantDataVector>(Op2)) {
Op2VK = TargetTransformInfo::OK_NonUniformConstantValue;
- if (cast<Constant>(Op2)->getSplatValue() != nullptr)
+ Constant *SplatValue = cast<Constant>(Op2)->getSplatValue();
+ if (SplatValue) {
+ ConstantInt *CInt = dyn_cast<ConstantInt>(SplatValue);
+ if (CInt && CInt->getValue().isPowerOf2())
+ Op2VP = TargetTransformInfo::OP_PowerOf2;
Op2VK = TargetTransformInfo::OK_UniformConstantValue;
+ }
}
- return TTI.getArithmeticInstrCost(I->getOpcode(), VectorTy, Op1VK, Op2VK);
+ return TTI.getArithmeticInstrCost(I->getOpcode(), VectorTy, Op1VK, Op2VK,
+ Op1VP, Op2VP);
}
case Instruction::Select: {
SelectInst *SI = cast<SelectInst>(I);
char LoopVectorize::ID = 0;
static const char lv_name[] = "Loop Vectorization";
INITIALIZE_PASS_BEGIN(LoopVectorize, LV_NAME, lv_name, false, false)
-INITIALIZE_AG_DEPENDENCY(TargetTransformInfo)
+INITIALIZE_PASS_DEPENDENCY(TargetTransformInfoWrapperPass)
INITIALIZE_AG_DEPENDENCY(AliasAnalysis)
+INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
INITIALIZE_PASS_DEPENDENCY(BlockFrequencyInfo)
INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
INITIALIZE_PASS_DEPENDENCY(LCSSA)
-INITIALIZE_PASS_DEPENDENCY(LoopInfo)
+INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
INITIALIZE_PASS_END(LoopVectorize, LV_NAME, lv_name, false, false)
ConstantInt::get(Cond[Part]->getType(), 1));
CondBlock = IfBlock->splitBasicBlock(InsertPt, "cond.store");
LoopVectorBody.push_back(CondBlock);
- VectorLp->addBasicBlockToLoop(CondBlock, LI->getBase());
+ VectorLp->addBasicBlockToLoop(CondBlock, *LI);
// Update Builder with newly created basic block.
Builder.SetInsertPoint(InsertPt);
}
if (IfPredicateStore) {
BasicBlock *NewIfBlock = CondBlock->splitBasicBlock(InsertPt, "else");
LoopVectorBody.push_back(NewIfBlock);
- VectorLp->addBasicBlockToLoop(NewIfBlock, LI->getBase());
+ VectorLp->addBasicBlockToLoop(NewIfBlock, *LI);
Builder.SetInsertPoint(InsertPt);
Instruction *OldBr = IfBlock->getTerminator();
BranchInst::Create(CondBlock, NewIfBlock, Cmp, OldBr);
return V;
}
-Value *InnerLoopUnroller::getConsecutiveVector(Value* Val, int StartIdx,
- bool Negate) {
+Value *InnerLoopUnroller::getStepVector(Value *Val, int StartIdx, Value *Step) {
// When unrolling and the VF is 1, we only need to add a simple scalar.
Type *ITy = Val->getType();
assert(!ITy->isVectorTy() && "Val must be a scalar");
- Constant *C = ConstantInt::get(ITy, StartIdx, Negate);
- return Builder.CreateAdd(Val, C, "induction");
+ Constant *C = ConstantInt::get(ITy, StartIdx);
+ return Builder.CreateAdd(Val, Builder.CreateMul(C, Step), "induction");
}