if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= val_len) {
+ buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
snd_usb_autosuspend(cval->mixer->chip);
return 0;
ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size, 1000);
+ buf, size);
snd_usb_autosuspend(chip);
if (ret < 0) {
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len, 100) >= 0) {
+ buf, val_len) >= 0) {
snd_usb_autosuspend(chip);
return 0;
}
* interface to ALSA control for feature/mixer units
*/
+/* volume control quirks */
+static void volume_control_quirks(struct usb_mixer_elem_info *cval,
+ struct snd_kcontrol *kctl)
+{
+ switch (cval->mixer->chip->usb_id) {
+ case USB_ID(0x0471, 0x0101):
+ case USB_ID(0x0471, 0x0104):
+ case USB_ID(0x0471, 0x0105):
+ case USB_ID(0x0672, 0x1041):
+ /* quirk for UDA1321/N101.
+ * note that detection between firmware 2.1.1.7 (N101)
+ * and later 2.1.1.21 is not very clear from datasheets.
+ * I hope that the min value is -15360 for newer firmware --jk
+ */
+ if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
+ cval->min == -15616) {
+ snd_printk(KERN_INFO
+ "set volume quirk for UDA1321/N101 chip\n");
+ cval->max = -256;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x09a4):
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set volume quirk for QuickCam E3500\n");
+ cval->min = 6080;
+ cval->max = 8768;
+ cval->res = 192;
+ }
+ break;
+
+ case USB_ID(0x046d, 0x0808):
+ case USB_ID(0x046d, 0x0809):
+ case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
+ case USB_ID(0x046d, 0x0991):
+ /* Most audio usb devices lie about volume resolution.
+ * Most Logitech webcams have res = 384.
+ * Proboly there is some logitech magic behind this number --fishor
+ */
+ if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+ snd_printk(KERN_INFO
+ "set resolution quirk: cval->res = 384\n");
+ cval->res = 384;
+ }
+ break;
+
+ }
+}
+
/*
* retrieve the minimum and maximum values for the specified control
*/
-static int get_min_max(struct usb_mixer_elem_info *cval, int default_min)
+static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
+ int default_min, struct snd_kcontrol *kctl)
{
/* for failsafe */
cval->min = default_min;
cval->initialized = 1;
}
+ if (kctl)
+ volume_control_quirks(cval, kctl);
+
/* USB descriptions contain the dB scale in 1/256 dB unit
* while ALSA TLV contains in 1/100 dB unit
*/
return 0;
}
+#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL)
/* get a feature/mixer unit info */
static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
uinfo->value.integer.min = 0;
uinfo->value.integer.max = 1;
} else {
- if (! cval->initialized)
- get_min_max(cval, 0);
+ if (!cval->initialized) {
+ get_min_max_with_quirks(cval, 0, kcontrol);
+ if (cval->initialized && cval->dBmin >= cval->dBmax) {
+ kcontrol->vd[0].access &=
+ ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK);
+ snd_ctl_notify(cval->mixer->chip->card,
+ SNDRV_CTL_EVENT_MASK_INFO,
+ &kcontrol->id);
+ }
+ }
uinfo->value.integer.min = 0;
uinfo->value.integer.max =
(cval->max - cval->min + cval->res - 1) / cval->res;
cval->ch_readonly = readonly_mask;
}
- /* get min/max values */
- get_min_max(cval, 0);
-
/* if all channels in the mask are marked read-only, make the control
* read-only. set_cur_mix_value() will check the mask again and won't
* issue write commands to read-only channels. */
len = snd_usb_copy_string_desc(state, nameid,
kctl->id.name, sizeof(kctl->id.name));
+ /* get min/max values */
+ get_min_max_with_quirks(cval, 0, kctl);
+
switch (control) {
case UAC_FU_MUTE:
case UAC_FU_VOLUME:
break;
}
- /* volume control quirks */
- switch (state->chip->usb_id) {
- case USB_ID(0x0471, 0x0101):
- case USB_ID(0x0471, 0x0104):
- case USB_ID(0x0471, 0x0105):
- case USB_ID(0x0672, 0x1041):
- /* quirk for UDA1321/N101.
- * note that detection between firmware 2.1.1.7 (N101)
- * and later 2.1.1.21 is not very clear from datasheets.
- * I hope that the min value is -15360 for newer firmware --jk
- */
- if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
- cval->min == -15616) {
- snd_printk(KERN_INFO
- "set volume quirk for UDA1321/N101 chip\n");
- cval->max = -256;
- }
- break;
-
- case USB_ID(0x046d, 0x09a4):
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set volume quirk for QuickCam E3500\n");
- cval->min = 6080;
- cval->max = 8768;
- cval->res = 192;
- }
- break;
-
- case USB_ID(0x046d, 0x0808):
- case USB_ID(0x046d, 0x0809):
- case USB_ID(0x046d, 0x0991):
- /* Most audio usb devices lie about volume resolution.
- * Most Logitech webcams have res = 384.
- * Proboly there is some logitech magic behind this number --fishor
- */
- if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
- "set resolution quirk: cval->res = 384\n");
- cval->res = 384;
- }
- break;
-
- }
-
range = (cval->max - cval->min) / cval->res;
/* Are there devices with volume range more than 255? I use a bit more
* to be sure. 384 is a resolution magic number found on Logitech
build_feature_ctl(state, _ftr, 0, i, &iterm, unitid, 0);
}
} else { /* UAC_VERSION_2 */
- for (i = 0; i < 30/2; i++) {
+ for (i = 0; i < ARRAY_SIZE(audio_feature_info); i++) {
unsigned int ch_bits = 0;
unsigned int ch_read_only = 0;
projects / firefly-linux-kernel-4.4.55.git / blobdiff