/dts-v1/;
-/include/ "danube.dtsi"
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
/ {
model = "ARV7510PW22 - Astoria Networks";
- chosen {
- bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
- };
-
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-internet = &internet;
+ led-usb = &umts;
led-wifi = &wlan;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
- gpios = <&gpio 9 0>;
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
ifxhcd@E101000 {
status = "okay";
- gpios = <&gpio 8 0>;
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
-
- pci@E105400 {
- status = "okay";
- lantiq,external-clock;
- interrupt-map = <
- 0x7000 0 0 1 &icu0 30
- 0x7800 0 0 1 &icu0 135
- 0x7800 0 0 2 &icu0 135
- 0x7800 0 0 3 &icu0 135
- >;
- gpio-reset = <&gpio 21 0>;
- req-mask = <0x3>;
- };
- };
-
- ralink_eep {
- compatible = "ralink,eeprom";
- ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
rfkill {
label = "rfkill";
- gpios = <&gpio 11 1>;
- linux,code = <0xf7>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
};
restart {
label = "restart";
- gpios = <&gpio 12 1>;
- linux,code = <0x100>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
};
reset {
label = "reset";
- gpios = <&gpio 28 1>;
- linux,code = <0x198>;
+ gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
compatible = "gpio-leds";
power: power {
label = "power";
- gpios = <&gpio 2 1>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
internet: internet {
label = "internet";
- gpios = <&gpio 4 1>;
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
wlan: wlan {
label = "wlan";
- gpios = <&gpio 10 1>;
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
- 3g {
+ umts: 3g {
label = "3g";
- gpios = <&gpio 15 1>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
message {
label = "message";
- gpios = <&gpio 20 1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
};
};
+
+&pci0 {
+ status = "okay";
+ lantiq,external-clock;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 30
+ 0x7800 0 0 1 &icu0 135
+ 0x7800 0 0 2 &icu0 135
+ 0x7800 0 0 3 &icu0 135
+ >;
+ gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+ req-mask = <0x3>;
+
+ wifi@1814,3592 {
+ compatible = "pci1814,3592";
+ reg = <0x7000 0 0 0 0>;
+ ralink,mtd-eeprom = <&boardconfig 0x410>;
+ ralink,mtd-eeprom-swap;
+ };
+};