#define WL351_GPIO_BUTTON_RESET 10
#define WL351_GPIO_BUTTON_WPS 0
-#define WL351_BUTTONS_POLL_INTERVAL 20
-
+#define WL351_KEYS_POLL_INTERVAL 20
+#define WL351_KEYS_DEBOUNCE_INTERVAL (3 * WL351_KEYS_POLL_INTERVAL)
static struct gpio_led wl351_leds_gpio[] __initdata = {
{
};
-static struct gpio_button wl351_gpio_buttons[] __initdata = {
+static struct gpio_keys_button wl351_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
- .threshold = 3,
+ .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL,
.gpio = WL351_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
- .threshold = 3,
+ .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL,
.gpio = WL351_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
-static struct mtd_partition wl351_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "factory",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x050000,
- .size = 0x110000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x230000,
- }, {
- .name = "user (jffs2)",
- .offset = 0x3F0000,
- .size = 0x010000,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x3a0000,
- }
-};
-
-static struct physmap_flash_data wl351_flash_data = {
- .nr_parts = ARRAY_SIZE(wl351_partitions),
- .parts = wl351_partitions,
-};
-
-
static struct rtl8366_platform_data wl351_switch_data = {
.gpio_sda = RT305X_GPIO_I2C_SD,
.gpio_sck = RT305X_GPIO_I2C_SCLK,
RT305X_GPIO_MODE_I2C |
RT305X_GPIO_MODE_SPI |
RT305X_GPIO_MODE_MDIO);
- rt305x_register_flash(0, &wl351_flash_data);
+
+ rt305x_register_flash(0);
+
ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio),
wl351_leds_gpio);
- ramips_register_gpio_buttons(-1, WL351_BUTTONS_POLL_INTERVAL,
+ ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wl351_gpio_buttons),
wl351_gpio_buttons);
- // external rtl8366rb
- rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS;
+ /* External RTL8366RB. */
+ rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
rt305x_esw_data.reg_initval_fct2 = 0x0002500c;
+ /*
+ * ext phy base addr 31, rx/tx clock skew 0,
+ * turbo mii off, rgmi 3.3v off, port 5 polling off
+ * port5: enabled, gige, full-duplex, rx/tx-flow-control
+ * port6: enabled, gige, full-duplex, rx/tx-flow-control
+ */
rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff;
rt305x_register_ethernet();
platform_device_register(&wl351_switch);