//
// The LLVM Compiler Infrastructure
//
-// This file was developed by the LLVM research group and is distributed under
-// the University of Illinois Open Source License. See LICENSE.TXT for details.
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
#include "CodeEmitterGen.h"
#include "CodeGenTarget.h"
#include "Record.h"
+#include "llvm/ADT/StringExtras.h"
#include "llvm/Support/Debug.h"
using namespace llvm;
-void CodeEmitterGen::emitInstrOpBits(std::ostream &o,
- const std::vector<RecordVal> &Vals,
- std::map<std::string, unsigned> &OpOrder,
- std::map<std::string, bool> &OpContinuous)
-{
- for (unsigned f = 0, e = Vals.size(); f != e; ++f) {
- if (Vals[f].getPrefix()) {
- BitsInit *FieldInitializer = (BitsInit*)Vals[f].getValue();
+void CodeEmitterGen::reverseBits(std::vector<Record*> &Insts) {
+ for (std::vector<Record*>::iterator I = Insts.begin(), E = Insts.end();
+ I != E; ++I) {
+ Record *R = *I;
+ if (R->getName() == "PHI" ||
+ R->getName() == "INLINEASM" ||
+ R->getName() == "DBG_LABEL" ||
+ R->getName() == "EH_LABEL" ||
+ R->getName() == "GC_LABEL" ||
+ R->getName() == "DECLARE" ||
+ R->getName() == "EXTRACT_SUBREG" ||
+ R->getName() == "INSERT_SUBREG" ||
+ R->getName() == "IMPLICIT_DEF" ||
+ R->getName() == "SUBREG_TO_REG" ||
+ R->getName() == "COPY_TO_REGCLASS") continue;
- // Scan through the field looking for bit initializers of the current
- // variable...
- for (int i = FieldInitializer->getNumBits()-1; i >= 0; --i) {
- Init *I = FieldInitializer->getBit(i);
- if (BitInit *BI = dynamic_cast<BitInit*>(I)) {
- DEBUG(o << " // bit init: f: " << f << ", i: " << i << "\n");
- } else if (UnsetInit *UI = dynamic_cast<UnsetInit*>(I)) {
- DEBUG(o << " // unset init: f: " << f << ", i: " << i << "\n");
- } else if (VarBitInit *VBI = dynamic_cast<VarBitInit*>(I)) {
- TypedInit *TI = VBI->getVariable();
- if (VarInit *VI = dynamic_cast<VarInit*>(TI)) {
- // If the bits of the field are laid out consecutively in the
- // instruction, then instead of separately ORing in bits, just
- // mask and shift the entire field for efficiency.
- if (OpContinuous[VI->getName()]) {
- // already taken care of in the loop above, thus there is no
- // need to individually OR in the bits
+ BitsInit *BI = R->getValueAsBitsInit("Inst");
- // for debugging, output the regular version anyway, commented
- DEBUG(o << " // Value |= getValueBit(op"
- << OpOrder[VI->getName()] << ", " << VBI->getBitNum()
- << ")" << " << " << i << ";\n");
- } else {
- o << " Value |= getValueBit(op" << OpOrder[VI->getName()]
- << ", " << VBI->getBitNum()
- << ")" << " << " << i << ";\n";
- }
- } else if (FieldInit *FI = dynamic_cast<FieldInit*>(TI)) {
- // FIXME: implement this!
- std::cerr << "Error: FieldInit not implemented!\n";
- abort();
- } else {
- std::cerr << "Error: unimplemented case in "
- << "CodeEmitterGen::emitInstrOpBits()\n";
- abort();
- }
- }
- }
+ unsigned numBits = BI->getNumBits();
+ BitsInit *NewBI = new BitsInit(numBits);
+ for (unsigned bit = 0, end = numBits / 2; bit != end; ++bit) {
+ unsigned bitSwapIdx = numBits - bit - 1;
+ Init *OrigBit = BI->getBit(bit);
+ Init *BitSwap = BI->getBit(bitSwapIdx);
+ NewBI->setBit(bit, BitSwap);
+ NewBI->setBit(bitSwapIdx, OrigBit);
+ }
+ if (numBits % 2) {
+ unsigned middle = (numBits + 1) / 2;
+ NewBI->setBit(middle, BI->getBit(middle));
}
+
+ // Update the bits in reversed order so that emitInstrOpBits will get the
+ // correct endianness.
+ R->getValue("Inst")->setValue(NewBI);
}
}
-void CodeEmitterGen::run(std::ostream &o) {
+// If the VarBitInit at position 'bit' matches the specified variable then
+// return the variable bit position. Otherwise return -1.
+int CodeEmitterGen::getVariableBit(const std::string &VarName,
+ BitsInit *BI, int bit) {
+ if (VarBitInit *VBI = dynamic_cast<VarBitInit*>(BI->getBit(bit))) {
+ TypedInit *TI = VBI->getVariable();
+
+ if (VarInit *VI = dynamic_cast<VarInit*>(TI)) {
+ if (VI->getName() == VarName) return VBI->getBitNum();
+ }
+ }
+
+ return -1;
+}
+
+
+void CodeEmitterGen::run(raw_ostream &o) {
CodeGenTarget Target;
std::vector<Record*> Insts = Records.getAllDerivedDefinitions("Instruction");
+
+ // For little-endian instruction bit encodings, reverse the bit order
+ if (Target.isLittleEndianEncoding()) reverseBits(Insts);
EmitSourceFileHeader("Machine Code Emitter", o);
std::string Namespace = Insts[0]->getValueAsString("Namespace") + "::";
// Emit function declaration
o << "unsigned " << Target.getName() << "CodeEmitter::"
- << "getBinaryCodeForInstr(MachineInstr &MI) {\n";
+ << "getBinaryCodeForInstr(const MachineInstr &MI) {\n";
// Emit instruction base values
o << " static const unsigned InstBits[] = {\n";
const CodeGenInstruction *CGI = *IN;
Record *R = CGI->TheDef;
- if (IN != NumberedInstructions.begin()) o << ",\n";
-
- if (R->getName() == "PHI" || R->getName() == "INLINEASM") {
- o << " 0U";
+ if (R->getName() == "PHI" ||
+ R->getName() == "INLINEASM" ||
+ R->getName() == "DBG_LABEL" ||
+ R->getName() == "EH_LABEL" ||
+ R->getName() == "GC_LABEL" ||
+ R->getName() == "DECLARE" ||
+ R->getName() == "EXTRACT_SUBREG" ||
+ R->getName() == "INSERT_SUBREG" ||
+ R->getName() == "IMPLICIT_DEF" ||
+ R->getName() == "SUBREG_TO_REG" ||
+ R->getName() == "COPY_TO_REGCLASS") {
+ o << " 0U,\n";
continue;
}
BitsInit *BI = R->getValueAsBitsInit("Inst");
- // For little-endian instruction bit encodings, reverse the bit order
- if (Target.isLittleEndianEncoding()) {
- unsigned numBits = BI->getNumBits();
- BitsInit *NewBI = new BitsInit(numBits);
- for (unsigned bit = 0, end = numBits / 2; bit != end; ++bit) {
- unsigned bitSwapIdx = numBits - bit - 1;
- Init *OrigBit = BI->getBit(bit);
- Init *BitSwap = BI->getBit(bitSwapIdx);
- NewBI->setBit(bit, BitSwap);
- NewBI->setBit(bitSwapIdx, OrigBit);
- }
- if (numBits % 2) {
- unsigned middle = (numBits + 1) / 2;
- NewBI->setBit(middle, BI->getBit(middle));
- }
- BI = NewBI;
-
- // Update the bits in reversed order so that emitInstrOpBits will get the
- // correct endianness.
- R->getValue("Inst")->setValue(NewBI);
- }
-
- unsigned Value = 0;
- const std::vector<RecordVal> &Vals = R->getValues();
-
// Start by filling in fixed values...
+ unsigned Value = 0;
for (unsigned i = 0, e = BI->getNumBits(); i != e; ++i) {
if (BitInit *B = dynamic_cast<BitInit*>(BI->getBit(e-i-1))) {
Value |= B->getValue() << (e-i-1);
}
}
- o << " " << Value << "U";
+ o << " " << Value << "U," << '\t' << "// " << R->getName() << "\n";
}
- o << "\n };\n";
-
- // Emit initial function code
- o << " const unsigned opcode = MI.getOpcode();\n"
- << " unsigned Value = InstBits[opcode];\n"
- << " switch (opcode) {\n";
-
- // Emit a case statement for each opcode
- for (std::vector<Record*>::iterator I = Insts.begin(), E = Insts.end();
- I != E; ++I) {
- Record *R = *I;
- if (R->getName() == "PHI" || R->getName() == "INLINEASM") continue;
+ o << " 0U\n };\n";
+
+ // Map to accumulate all the cases.
+ std::map<std::string, std::vector<std::string> > CaseMap;
+
+ // Construct all cases statement for each opcode
+ for (std::vector<Record*>::iterator IC = Insts.begin(), EC = Insts.end();
+ IC != EC; ++IC) {
+ Record *R = *IC;
+ const std::string &InstName = R->getName();
+ std::string Case("");
- o << " case " << Namespace << R->getName() << ": {\n";
+ if (InstName == "PHI" ||
+ InstName == "INLINEASM" ||
+ InstName == "DBG_LABEL"||
+ InstName == "EH_LABEL"||
+ InstName == "GC_LABEL"||
+ InstName == "DECLARE"||
+ InstName == "EXTRACT_SUBREG" ||
+ InstName == "INSERT_SUBREG" ||
+ InstName == "IMPLICIT_DEF" ||
+ InstName == "SUBREG_TO_REG" ||
+ InstName == "COPY_TO_REGCLASS") continue;
BitsInit *BI = R->getValueAsBitsInit("Inst");
const std::vector<RecordVal> &Vals = R->getValues();
-
+ CodeGenInstruction &CGI = Target.getInstruction(InstName);
+
// Loop over all of the fields in the instruction, determining which are the
// operands to the instruction.
unsigned op = 0;
- std::map<std::string, unsigned> OpOrder;
- std::map<std::string, bool> OpContinuous;
for (unsigned i = 0, e = Vals.size(); i != e; ++i) {
if (!Vals[i].getPrefix() && !Vals[i].getValue()->isComplete()) {
// Is the operand continuous? If so, we can just mask and OR it in
// instead of doing it bit-by-bit, saving a lot in runtime cost.
- BitsInit *InstInit = BI;
- int beginBitInVar = -1, endBitInVar = -1;
- int beginBitInInst = -1, endBitInInst = -1;
- bool continuous = true;
-
- for (int bit = InstInit->getNumBits()-1; bit >= 0; --bit) {
- if (VarBitInit *VBI =
- dynamic_cast<VarBitInit*>(InstInit->getBit(bit))) {
- TypedInit *TI = VBI->getVariable();
- if (VarInit *VI = dynamic_cast<VarInit*>(TI)) {
- // only process the current variable
- if (VI->getName() != Vals[i].getName())
- continue;
-
- if (beginBitInVar == -1)
- beginBitInVar = VBI->getBitNum();
-
- if (endBitInVar == -1)
- endBitInVar = VBI->getBitNum();
- else {
- if (endBitInVar == (int)VBI->getBitNum() + 1)
- endBitInVar = VBI->getBitNum();
- else {
- continuous = false;
- break;
- }
- }
-
- if (beginBitInInst == -1)
- beginBitInInst = bit;
- if (endBitInInst == -1)
- endBitInInst = bit;
- else {
- if (endBitInInst == bit + 1)
- endBitInInst = bit;
- else {
- continuous = false;
- break;
- }
- }
+ const std::string &VarName = Vals[i].getName();
+ bool gotOp = false;
+
+ for (int bit = BI->getNumBits()-1; bit >= 0; ) {
+ int varBit = getVariableBit(VarName, BI, bit);
+
+ if (varBit == -1) {
+ --bit;
+ } else {
+ int beginInstBit = bit;
+ int beginVarBit = varBit;
+ int N = 1;
+
+ for (--bit; bit >= 0;) {
+ varBit = getVariableBit(VarName, BI, bit);
+ if (varBit == -1 || varBit != (beginVarBit - N)) break;
+ ++N;
+ --bit;
+ }
- // maintain same distance between bits in field and bits in
- // instruction. if the relative distances stay the same
- // throughout,
- if (beginBitInVar - (int)VBI->getBitNum() !=
- beginBitInInst - bit) {
- continuous = false;
- break;
- }
+ if (!gotOp) {
+ /// If this operand is not supposed to be emitted by the generated
+ /// emitter, skip it.
+ while (CGI.isFlatOperandNotEmitted(op))
+ ++op;
+
+ Case += " // op: " + VarName + "\n"
+ + " op = getMachineOpValue(MI, MI.getOperand("
+ + utostr(op++) + "));\n";
+ gotOp = true;
+ }
+
+ unsigned opMask = ~0U >> (32-N);
+ int opShift = beginVarBit - N + 1;
+ opMask <<= opShift;
+ opShift = beginInstBit - beginVarBit;
+
+ if (opShift > 0) {
+ Case += " Value |= (op & " + utostr(opMask) + "U) << "
+ + itostr(opShift) + ";\n";
+ } else if (opShift < 0) {
+ Case += " Value |= (op & " + utostr(opMask) + "U) >> "
+ + itostr(-opShift) + ";\n";
+ } else {
+ Case += " Value |= op & " + utostr(opMask) + "U;\n";
}
}
}
+ }
+ }
- // If we have found no bit in "Inst" which comes from this field, then
- // this is not an operand!!
- if (beginBitInInst != -1) {
- o << " // op" << op << ": " << Vals[i].getName() << "\n"
- << " int op" << op
- <<" = getMachineOpValue(MI, MI.getOperand("<<op<<"));\n";
- //<< " MachineOperand &op" << op <<" = MI.getOperand("<<op<<");\n";
- OpOrder[Vals[i].getName()] = op++;
-
- DEBUG(o << " // Var: begin = " << beginBitInVar
- << ", end = " << endBitInVar
- << "; Inst: begin = " << beginBitInInst
- << ", end = " << endBitInInst << "\n");
-
- if (continuous) {
- DEBUG(o << " // continuous: op" << OpOrder[Vals[i].getName()]
- << "\n");
-
- // Mask off the right bits
- // Low mask (ie. shift, if necessary)
- assert(endBitInVar >= 0 && "Negative shift amount in masking!");
- if (endBitInVar != 0) {
- o << " op" << OpOrder[Vals[i].getName()]
- << " >>= " << endBitInVar << ";\n";
- beginBitInVar -= endBitInVar;
- endBitInVar = 0;
- }
+ std::vector<std::string> &InstList = CaseMap[Case];
+ InstList.push_back(InstName);
+ }
- // High mask
- o << " op" << OpOrder[Vals[i].getName()]
- << " &= (1<<" << beginBitInVar+1 << ") - 1;\n";
- // Shift the value to the correct place (according to place in inst)
- assert(endBitInInst >= 0 && "Negative shift amount!");
- if (endBitInInst != 0)
- o << " op" << OpOrder[Vals[i].getName()]
- << " <<= " << endBitInInst << ";\n";
+ // Emit initial function code
+ o << " const unsigned opcode = MI.getOpcode();\n"
+ << " unsigned Value = InstBits[opcode];\n"
+ << " unsigned op = 0;\n"
+ << " op = op; // suppress warning\n"
+ << " switch (opcode) {\n";
- // Just OR in the result
- o << " Value |= op" << OpOrder[Vals[i].getName()] << ";\n";
- }
+ // Emit each case statement
+ std::map<std::string, std::vector<std::string> >::iterator IE, EE;
+ for (IE = CaseMap.begin(), EE = CaseMap.end(); IE != EE; ++IE) {
+ const std::string &Case = IE->first;
+ std::vector<std::string> &InstList = IE->second;
- // otherwise, will be taken care of in the loop below using this
- // value:
- OpContinuous[Vals[i].getName()] = continuous;
- }
- }
+ for (int i = 0, N = InstList.size(); i < N; i++) {
+ if (i) o << "\n";
+ o << " case " << Namespace << InstList[i] << ":";
}
-
- emitInstrOpBits(o, Vals, OpOrder, OpContinuous);
-
+ o << " {\n";
+ o << Case;
o << " break;\n"
<< " }\n";
}
// Default case: unhandled opcode
o << " default:\n"
- << " std::cerr << \"Not supported instr: \" << MI << \"\\n\";\n"
- << " abort();\n"
+ << " std::string msg;\n"
+ << " raw_string_ostream Msg(msg);\n"
+ << " Msg << \"Not supported instr: \" << MI;\n"
+ << " llvm_report_error(Msg.str());\n"
<< " }\n"
<< " return Value;\n"
<< "}\n\n";