X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;ds=sidebyside;f=Makefile.rules;h=88cdd97c00ad647ff2ab321d11251ad382590497;hb=060c1f816cdb15f3d1ce926cf48f89d3535ab412;hp=5770ada82720a19a418d39343e666e22629bdab9;hpb=f8d630a0fa5dfdbf64ab875372fe83a3742926dc;p=oota-llvm.git diff --git a/Makefile.rules b/Makefile.rules index 5770ada8272..88cdd97c00a 100644 --- a/Makefile.rules +++ b/Makefile.rules @@ -5,45 +5,120 @@ # These are platform dependant, so this is the file used to specify these # system dependant operations. # -# The following functionality may be set by setting incoming variables: +# The following functionality can be set by setting incoming variables. +# The variable $(LEVEL) *must* be set: # # 1. LEVEL - The level of the current subdirectory from the top of the # MagicStats view. This level should be expressed as a path, for # example, ../.. for two levels deep. # # 2. DIRS - A list of subdirectories to be built. Fake targets are set up -# so that each of the targets "all", "install", and "clean" each build. -# the subdirectories before the local target. +# so that each of the targets "all", "install", and "clean" each build +# the subdirectories before the local target. DIRS are guaranteed to be +# built in order. # -# 3. Source - If specified, this sets the source code filenames. If this +# 3. PARALLEL_DIRS - A list of subdirectories to be built, but that may be +# built in any order. All DIRS are built in order before PARALLEL_DIRS are +# built, which are then built in any order. +# +# 4. Source - If specified, this sets the source code filenames. If this # is not set, it defaults to be all of the .cpp, .c, .y, and .l files # in the current directory. Also, if you want to build files in addition # to the local files, you can use the ExtraSource variable # +# 5. SourceDir - If specified, this specifies a directory that the source files +# are in, if they are not in the current directory. This should include a +# trailing / character. +# +# 6. PROJ_COMPILE - If set to 1, then this makefile can also be used to +# compile other projects using llvm. Note if this option is set then the +# following *must* hold +# PROJLEVEL should be set to the top of the source directory for the +# project files +# LEVEL should be set to the top of LLVM source tree +# LLVM_LIB_DIR should be set to the top of the LLVM build tree +# #===-----------------------------------------------------------------------==== -# These are options that can either be enabled here, or can be enabled on the -# make command line (ie, make ENABLE_PROFILING=1) # +# Configuration file to set paths specific to local installation of LLVM +# +include $(LEVEL)/Makefile.config + +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: +# +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. +# +# o BUILD_SRC_DIR : The directory containing the code to build. +# o BUILD_SRC_ROOT : The root directory of the code to build. +# +# o BUILD_OBJ_DIR : The directory in which compiled code will be placed. +# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. +# +########################################################################### + +# +# Set the source build directory. That is almost always the current directory. +# +ifndef BUILD_SRC_DIR +BUILD_SRC_DIR = $(shell pwd) +endif + +# +# Set the source root directory. +# +ifndef BUILD_SRC_ROOT +BUILD_SRC_ROOT = $(shell cd $(BUILD_SRC_DIR)/$(LEVEL); pwd) +endif -# When ENABLE_PROFILING is enabled, the llvm source base is built with profile -# information to allow gprof to be used to get execution frequencies. # -#ENABLE_PROFILING = 1 +# Set the object build directory. Its location depends upon the source path +# and where object files should go. +# +ifndef BUILD_OBJ_DIR +ifeq ($(OBJ_ROOT),.) +BUILD_OBJ_DIR = $(shell pwd) +else +BUILD_OBJ_DIR := $(OBJ_ROOT)$(patsubst $(shell dirname $(BUILD_SRC_ROOT))%,%,$(shell cd $(BUILD_SRC_DIR); pwd)) +endif +endif + +# +# Set the root of the object directory. +# +ifndef BUILD_OBJ_ROOT +ifeq ($(OBJ_ROOT),.) +BUILD_OBJ_ROOT = $(shell cd $(LEVEL); pwd) +else +BUILD_OBJ_ROOT := $(OBJ_ROOT)$(patsubst $(shell dirname $(BUILD_SRC_ROOT))%,%,$(shell cd $(BUILD_SRC_ROOT); pwd)) +endif +endif -# When ENABLE_PURIFY is enabled, the LLVM tools are linked with purify (which -# must be locally installed) to allow for some automated memory error debugging. # -#ENABLE_PURIFY = 1 +# Set the LLVM source directory. +# It is typically the root directory of what we're compiling now. +# +ifndef LLVM_SRC_ROOT +LLVM_SRC_ROOT = $(BUILD_SRC_ROOT) +endif -# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are -# turned on, and Debug builds are turned off. # -#ENABLE_OPTIMIZED = 1 +# Set the LLVM object directory. +# +ifndef LLVM_OBJ_ROOT +LLVM_OBJ_ROOT = $(BUILD_OBJ_ROOT) +endif -# If you do not want to build into /shared, uncomment this +# Figure out how to do platform specific stuff on this platform. This is really +# gross and should be autoconfiscated (automake actually), but should hopefully +# work on Linux and solaris (SunOS). # -#BUILD_ROOT = . +UNAME := $(shell uname) +include $(LLVM_SRC_ROOT)/Makefile.$(UNAME) ifdef SHARED_LIBRARY # if SHARED_LIBRARY is specified, the default is to build the dynamic lib @@ -56,94 +131,177 @@ all :: # Default for install is to at least build everything... install :: - -# Figure out which directory to build stuff into. We want to build into the -# /shared directory by default because it is guaranteed to be local to the -# current machine. -# -ifdef BUILD_ROOT -BUILD_ROOT_TOP := $(LEVEL) -else - -LOGIN_NAME := $(shell whoami) -CUR_DIRECTORY := $(shell pwd) -BUILD_ROOT := /shared/$(LOGIN_NAME)$(patsubst $(HOME)%,%,$(CUR_DIRECTORY)) - -# Calculate the BUILD_ROOT_TOP variable, which is the top of the llvm/ tree. -# Note that although this is just equal to $(BUILD_ROOT)/$(LEVEL), we cannot use -# this expression because some of the directories on the source tree may not -# exist in the build tree (for example the test/ heirarchy). Thus we evaluate -# the directory to eliminate the ../'s -# -TOP_DIRECTORY := $(shell cd $(LEVEL); pwd) -BUILD_ROOT_TOP := /shared/$(LOGIN_NAME)$(patsubst $(HOME)%,%,$(TOP_DIRECTORY)) -endif +# Default rule for test. It ensures everything has a test rule +test:: #-------------------------------------------------------------------- -# Installation configuration options... +# Variables derived from configuration options... #-------------------------------------------------------------------- #BinInstDir=/usr/local/bin -#LibInstDir=/usrl/local/lib/xxx +#LibInstDir=/usr/local/lib/xxx #DocInstDir=/usr/doc/xxx -BURG = /home/vadve/vadve/Research/DynOpt/Burg/burg BURG_OPTS = -I +PURIFY := $(PURIFY) -cache-dir="$(BUILD_OBJ_ROOT)/../purifycache" -chain-length="30" -messages=all -PURIFY = /usr/dcs/applications/purify/bin/purify -cache-dir="$(BUILD_ROOT_TOP)/../purifycache" -chain-length="30" -messages=all +ifdef ENABLE_PROFILING + ENABLE_OPTIMIZED = 1 + CONFIGURATION := Profile +else + ifdef ENABLE_OPTIMIZED + CONFIGURATION := Release + else + CONFIGURATION := Debug + endif +endif -# Shorthand for commonly accessed directories -LIBDEBUG := $(BUILD_ROOT_TOP)/lib/Debug -LIBRELEASE := $(BUILD_ROOT_TOP)/lib/Release -TOOLDEBUG := $(BUILD_ROOT_TOP)/tools/Debug -TOOLRELEASE := $(BUILD_ROOT_TOP)/tools/Release +########################################################################### +# Library Locations +# These variables describe various library locations: +# +# DEST* = Location of where libraries that are built will be placed. +# LLVM* = Location of LLVM libraries used for linking. +# PROJ* = Location of previously built libraries used for linking. +########################################################################### + +# Libraries that are being built +DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug +DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release +DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile +DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) + +# LLVM libraries used for linking +LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug +LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release +LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile +LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) + +# Libraries that were built that will now be used for linking +PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug +PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release +PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile +PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) + +########################################################################### +# Tool Locations +# These variables describe various tool locations: +# +# DEST* = Location of where tools that are built will be placed. +# LLVM* = Location of LLVM tools used for building. +# PROJ* = Location of previously built tools used for linking. +########################################################################### + +DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug +DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release +DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile +DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) + +LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug +LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release +LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile +LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) + +PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug +PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release +PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile +PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) + +# Verbosity levels +ifndef VERBOSE +VERB := @ +endif #--------------------------------------------------------- # Compilation options... #--------------------------------------------------------- -# Special tools used while building -RunBurg := $(BURG) $(BURG_OPTS) +########################################################################### +# Special tools used while building the LLVM tree. Burg is built as part of the +# utils directory. +########################################################################### +BURG := $(LLVMTOOLCURRENT)/burg +RunBurg := $(BURG) $(BURG_OPTS) + +TBLGEN := $(LLVMTOOLCURRENT)/tblgen # Enable this for profiling support with 'gprof' +# This automatically enables optimized builds. ifdef ENABLE_PROFILING -PROFILE = -pg -else -PROFILE = + PROFILE = -pg +endif + +########################################################################### +# Compile Time Flags +########################################################################### + +# +# Include both the project headers and the LLVM headers for compilation +# +CPPFLAGS += -I$(BUILD_SRC_ROOT)/include -I$(LLVM_SRC_ROOT)/include + +# By default, strip symbol information from executable +ifndef KEEP_SYMBOLS +STRIP = $(PLATFORMSTRIPOPTS) +STRIP_WARN_MSG = "(without symbols) " endif +# Allow gnu extensions... +CPPFLAGS += -D_GNU_SOURCE + # -Wno-unused-parameter -CompileCommonOpts := $(PROFILE) -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include +CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include +CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions -fshort-enums -# Compile a file, don't link... +# Compile a cpp file, don't link... Compile := $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) CompileG := $(Compile) -g -D_DEBUG -CompileO := $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fnonnull-objects -freg-struct-return -fshort-enums +CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer +CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE) + +# Compile a c file, don't link... +CompileC := $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts) +CompileCG := $(CompileC) -g -D_DEBUG +CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer +CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE) + # Link final executable ifdef ENABLE_PURIFY # To enable purify, build with 'gmake ENABLE_PURIFY=1' -Link := $(PURIFY) $(CXX) $(PROFILE) -static +Link := $(PURIFY) $(CXX) -static else -Link := $(CXX) $(PROFILE) +Link := $(CXX) +endif + +ifdef PROJ_COMPILE +# include both projlib source and llvmlib source +LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP) +LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE) +LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE) +else +LinkG := $(Link) -g -L$(LLVMLIBDEBUGSOURCE) $(STRIP) +LinkO := $(Link) -O3 -L$(LLVMLIBRELEASESOURCE) +LinkP := $(Link) -O3 -L$(LLVMLIBPROFILESOURCE) $(PROFILE) endif -LinkG := $(Link) -g -L $(LIBDEBUG) -LinkO := $(Link) -O3 -L $(LIBRELEASE) -# Create a .so file from a .o files... -#MakeSO := $(CXX) -shared $(PROFILE) -MakeSO := $(CXX) -G $(PROFILE) -MakeSOO := $(MakeSO) -O3 + # Create one .o file from a bunch of .o files... -Relink = ld -r +Relink = ${LD} -r + +# MakeSO - Create a .so file from a .o files... +MakeSO := $(CXX) $(MakeSharedObjectOption) +MakeSOO := $(MakeSO) -O3 +MakeSOP := $(MakeSOO) $(PROFILE) # Create dependancy file from CPP file, send to stdout. Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS) +DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS) # Archive a bunch of .o files into a .a file... -AR = ar cq +AR = ${AR_PATH} cq #---------------------------------------------------------- @@ -151,25 +309,46 @@ AR = ar cq # source files... # The local Makefile can list other Source files via ExtraSource = ... # +ifndef Source Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l) +endif -Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source))))) -ObjectsO = $(addprefix $(BUILD_ROOT)/Release/,$(Objs))) -ObjectsG = $(addprefix $(BUILD_ROOT)/Debug/,$(Objs)) +Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(notdir $(basename $(Source)))))) +ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs)) +ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs)) +ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs)) #--------------------------------------------------------- -# Handle the DIRS option +# Handle the DIRS and PARALLEL_DIRS options #--------------------------------------------------------- -ifdef DIRS # Only do this if we're using DIRS! +ifdef DIRS +all install clean test :: + $(VERB) for dir in ${DIRS}; do \ + (cd $$dir; $(MAKE) $@) || exit 1; \ + done +endif + +# Handle PARALLEL_DIRS +ifdef PARALLEL_DIRS +all :: $(addsuffix /.makeall , $(PARALLEL_DIRS)) +install :: $(addsuffix /.makeinstall, $(PARALLEL_DIRS)) +clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS)) +test :: $(addsuffix /.maketest , $(PARALLEL_DIRS)) -all :: $(addsuffix /.makeall , $(DIRS)) -install :: $(addsuffix /.makeinstall, $(DIRS)) -clean :: $(addsuffix /.makeclean , $(DIRS)) +%/.makeall %/.makeinstall %/.makeclean %/.maketest: + $(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@) +endif -%/.makeall %/.makeclean %/.makeinstall: - cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@) +ifdef OPTIONAL_DIRS +all install clean test :: + $(VERB) for dir in ${OPTIONAL_DIRS}; do \ + if [ -d $$dir ]; \ + then\ + (cd $$dir; $(MAKE) $@) || exit 1; \ + fi \ + done endif #--------------------------------------------------------- @@ -191,62 +370,70 @@ endif ifdef LIBRARYNAME -LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so -LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so -LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a -LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a -LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o -LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o +# Make sure there isn't any extranous whitespace on the LIBRARYNAME option +LIBRARYNAME := $(strip $(LIBRARYNAME)) +LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so +LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so +LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so +LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a +LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a +LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a +LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o +LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o +LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o -ifndef ENABLE_OPTIMIZED -BUILD_LIBNAME_G := $(LIBNAME_G) -ifndef DONT_BUILD_RELINKED -BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG) -endif -ifdef BUILD_ARCHIVE -BUILD_LIBNAME_AG := $(LIBNAME_AG) -endif -endif +# dynamic target builds a shared object version of the library... +dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so -# If optimized builds are enabled... -ifdef ENABLE_OPTIMIZED -BUILD_LIBNAME_O := $(LIBNAME_O) +# Does the library want a .o version built? ifndef DONT_BUILD_RELINKED -BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO) +all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o endif + +# Does the library want an archive version built? ifdef BUILD_ARCHIVE -BUILD_LIBNAME_AO := $(LIBNAME_AO) +all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a endif -endif - -all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug -all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release -dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) # .so files -$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir +$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir @echo ======= Linking $(LIBRARYNAME) release library ======= - $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts) + $(VERB) $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts) + +$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir + @echo ======= Linking $(LIBRARYNAME) profile library ======= + $(VERB) $(MakeSOP) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts) -$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir +$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir @echo ======= Linking $(LIBRARYNAME) debug library ======= - $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts) + $(VERB) $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts) -$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir +$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir @echo ======= Linking $(LIBRARYNAME) release library ======= @rm -f $@ - $(AR) $@ $(ObjectsO) $(LibSubDirs) + $(VERB) $(AR) $@ $(ObjectsO) $(LibSubDirs) -$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir +$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir + @echo ======= Linking $(LIBRARYNAME) profile library ======= + @rm -f $@ + $(VERB) $(AR) $@ $(ObjectsP) $(LibSubDirs) + +$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir @echo ======= Linking $(LIBRARYNAME) debug library ======= @rm -f $@ - $(AR) $@ $(ObjectsG) $(LibSubDirs) + $(VERB) $(AR) $@ $(ObjectsG) $(LibSubDirs) + +$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir + @echo "Linking $@" + $(VERB) $(Relink) -o $@ $(ObjectsO) $(LibSubDirs) -$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir - $(Relink) -o $@ $(ObjectsO) $(LibSubDirs) +$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir + @echo "Linking $@" + $(VERB) $(Relink) -o $@ $(ObjectsP) $(LibSubDirs) -$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir - $(Relink) -o $@ $(ObjectsG) $(LibSubDirs) +$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir + @echo "Linking $@" + $(VERB) $(Relink) -o $@ $(ObjectsG) $(LibSubDirs) endif @@ -272,92 +459,157 @@ endif ifdef TOOLNAME # TOOLEXENAME* - These compute the output filenames to generate... -TOOLEXENAME_G := $(BUILD_ROOT_TOP)/tools/Debug/$(TOOLNAME) -TOOLEXENAME_O := $(BUILD_ROOT_TOP)/tools/Release/$(TOOLNAME) -TOOLEXENAMES := $(TOOLEXENAME_G) -ifdef ENABLE_OPTIMIZED -TOOLEXENAMES += $(TOOLEXENAME_O) -endif +TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME) +TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME) +TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME) +TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME) # USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc. -USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) -USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS)) -USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) +PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) + +LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) +LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS)) +LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) +LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) +LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G) +LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O) +LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P) # USED_LIB_PATHS - Compute the path of the libraries used so that tools are # rebuilt if libraries change. This has to make sure to handle .a/.so and .o # files seperately. # STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) -USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS)) +USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS)) +USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS)) +USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS)) +LINK_OPTS := $(TOOLLINKOPTS) $(PLATFORMLINKOPTS) + + + + + + +# Tell make that we need to rebuild subdirectories before we can link the tool. +# This affects things like LLI which has library subdirectories. +$(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \ + $(addsuffix /.makeall, $(PARALLEL_DIRS)) all:: $(TOOLEXENAMES) + clean:: - rm -f $(TOOLEXENAMES) + $(VERB) rm -f $(TOOLEXENAMES) + +$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir + @echo ======= Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG)======= + $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) -$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(BUILD_ROOT_TOP)/tools/Debug/.dir - $(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(TOOLLINKOPTS) +$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir + @echo ======= Linking $(TOOLNAME) release executable ======= + $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) -$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(BUILD_ROOT_TOP)/tools/Release/.dir - $(LinkO) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_O) $(TOOLLINKOPTS) +$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir + @echo ======= Linking $(TOOLNAME) profile executable ======= + $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) endif #--------------------------------------------------------- -.PRECIOUS: $(BUILD_ROOT)/Depend/.dir -.PRECIOUS: $(BUILD_ROOT)/Debug/.dir $(BUILD_ROOT)/Release/.dir +.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir +.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir -# Create dependencies for the *.cpp files... -$(BUILD_ROOT)/Depend/%.d: %.cpp $(BUILD_ROOT)/Depend/.dir - $(Depend) $< | sed 's|$*\.o *|$(BUILD_ROOT)/Release/& $(BUILD_ROOT)/Debug/& $(BUILD_ROOT)/Depend/$(@F)|g' > $@ +# Create .o files in the ObjectFiles directory from the .cpp and .c files... +$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir + @echo "Compiling $<" + $(VERB) $(CompileO) $< -o $@ -# Create dependencies for the *.c files... -$(BUILD_ROOT)/Depend/%.d: %.c $(BUILD_ROOT)/Depend/.dir - $(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@ +$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir + $(VERB) $(CompileCO) $< -o $@ -# Create .o files in the ObjectFiles directory from the .cpp and .c files... -$(BUILD_ROOT)/Release/%.o: %.cpp $(BUILD_ROOT)/Release/.dir - $(CompileO) $< -o $@ +$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir + @echo "Compiling $<" + $(VERB) $(CompileP) $< -o $@ + +$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir + @echo "Compiling $<" + $(VERB) $(CompileCP) $< -o $@ -#Release/%.o: %.c Release/.dir Depend/.dir -# $(CompileOC) $< -o $@ +$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir + @echo "Compiling $<" + $(VERB) $(CompileG) $< -o $@ -$(BUILD_ROOT)/Debug/%.o: %.cpp $(BUILD_ROOT)/Debug/.dir - $(CompileG) $< -o $@ +$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir + $(VERB) $(CompileCG) $< -o $@ -#Debug/%.o: %.c Debug/.dir -# $(CompileGC) $< -o $@ +# +# Rules for building lex/yacc files +# +LEX_FILES = $(filter %.l, $(Source)) +LEX_OUTPUT = $(LEX_FILES:%.l=%.cpp) +YACC_FILES = $(filter %.y, $(Source)) +YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output) +.PRECIOUS: $(LEX_OUTPUT) $(YACC_OUTPUT) # Create a .cpp source file from a flex input file... this uses sed to cut down # on the warnings emited by GCC... +# +# The last line is a gross hack to work around flex aparently not being able to +# resize the buffer on a large token input. Currently, for uninitialized string +# buffers in LLVM we can generate very long tokens, so this is a hack around it. +# FIXME. (f.e. char Buffer[10000]; ) +# %.cpp: %.l - flex -t $< | sed '/^find_rule/d' | sed 's/void yyunput/inline void yyunput/' | sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' > $@ + $(FLEX) -t $< | sed '/^find_rule/d' | \ + sed 's/void yyunput/inline void yyunput/' | \ + sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ + sed 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' > $@ # Rule for building the bison parsers... - +%.c: %.y # Cancel built-in rules for yacc +%.h: %.y # Cancel built-in rules for yacc %.cpp %.h : %.y - bison -v -d -p $(<:%Parser.y=%) $(basename $@).y - mv -f $(basename $@).tab.c $(basename $@).cpp - mv -f $(basename $@).tab.h $(basename $@).h + @echo Bison\'ing $<... + $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $*.y + $(VERB) mv -f $*.tab.c $*.cpp + $(VERB) mv -f $*.tab.h $*.h # To create the directories... %/.dir: - mkdir -p $(@D) + $(VERB) mkdir -p $* @date > $@ -# Clean nukes the tree +# To create postscript files from dot files... +%.ps: %.dot + dot -Tps < $< > $@ + +# 'make clean' nukes the tree clean:: - rm -rf $(BUILD_ROOT)/Debug $(BUILD_ROOT)/Release $(BUILD_ROOT)/Depend - rm -f core *.o *.d *.so *~ *.flc + $(VERB) rm -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend + $(VERB) rm -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc + $(VERB) rm -f $(LEX_OUTPUT) $(YACC_OUTPUT) -# If dependancies were generated for the file that included this file, +# If dependencies were generated for the file that included this file, # include the dependancies now... # -SourceDepend := $(addsuffix .d,$(addprefix $(BUILD_ROOT)/Depend/,$(basename $(filter-out Debug/%, $(Source))))) +SourceBaseNames := $(basename $(notdir $(filter-out Debug/%, $(Source)))) +SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d) + +# Create dependencies for the *.cpp files... +#$(SourceDepend): \x +$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Depend/.dir + $(VERB) $(Depend) $< | sed 's|$*\.o *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ + +# Create dependencies for the *.c files... +#$(SourceDepend): \x +$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Depend/.dir + $(VERB) $(DependC) $< | sed 's|$*\.o *|Release/& Profile/& Debug/& Depend/$(@F)|g' > $@ + ifneq ($(SourceDepend),) -include $(SourceDepend) +-include $(SourceDepend) endif