X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=Documentation%2Fnetworking%2Fip-sysctl.txt;h=05915be862356cf75230851920af5d4738b095b5;hb=14c79092909a52b6fd6394b6ad5e7756c4f9565e;hp=99838259e2e67fa4203ed9685ccd4818b532a2dc;hpb=81c1f74de3b6a9be0006a734d3584150f9c2e295;p=firefly-linux-kernel-4.4.55.git

diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 99838259e2e6..05915be86235 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -384,6 +384,14 @@ tcp_mem - vector of 3 INTEGERs: min, pressure, max
 	Defaults are calculated at boot time from amount of available
 	memory.
 
+tcp_min_rtt_wlen - INTEGER
+	The window length of the windowed min filter to track the minimum RTT.
+	A shorter window lets a flow more quickly pick up new (higher)
+	minimum RTT when it is moved to a longer path (e.g., due to traffic
+	engineering). A longer window makes the filter more resistant to RTT
+	inflations such as transient congestion. The unit is seconds.
+	Default: 300
+
 tcp_moderate_rcvbuf - BOOLEAN
 	If set, TCP performs receive buffer auto-tuning, attempting to
 	automatically size the buffer (no greater than tcp_rmem[2]) to
@@ -425,6 +433,15 @@ tcp_orphan_retries - INTEGER
 	you should think about lowering this value, such sockets
 	may consume significant resources. Cf. tcp_max_orphans.
 
+tcp_recovery - INTEGER
+	This value is a bitmap to enable various experimental loss recovery
+	features.
+
+	RACK: 0x1 enables the RACK loss detection for fast detection of lost
+	      retransmissions and tail drops.
+
+	Default: 0x1
+
 tcp_reordering - INTEGER
 	Initial reordering level of packets in a TCP stream.
 	TCP stack can then dynamically adjust flow reordering level
@@ -884,8 +901,8 @@ icmp_ignore_bogus_error_responses - BOOLEAN
 
 icmp_errors_use_inbound_ifaddr - BOOLEAN
 
-	If zero, icmp error messages except redirects are sent with the primary
-	address of the exiting interface.
+	If zero, icmp error messages are sent with the primary address of
+	the exiting interface.
 
 	If non-zero, the message will be sent with the primary address of
 	the interface that received the packet that caused the icmp error.
@@ -897,23 +914,8 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN
 	then the primary address of the first non-loopback interface that
 	has one will be used regardless of this setting.
 
-	The source address selection of icmp redirect messages is controlled by
-	icmp_errors_use_inbound_ifaddr.
 	Default: 0
 
-icmp_redirects_use_orig_daddr - BOOLEAN
-
-	If zero, icmp redirect messages are sent using the address specified for
-	other icmp errors by icmp_errors_use_inbound_ifaddr.
-
-	If non-zero, the message will be sent with the destination address of
-	the packet that caused the icmp redirect.
-	This behaviour is the preferred one on VRRP routers (see RFC 5798
-	section 8.1.1).
-
-	Default: 0
-
-
 igmp_max_memberships - INTEGER
 	Change the maximum number of multicast groups we can subscribe to.
 	Default: 20
@@ -1214,7 +1216,8 @@ tag - INTEGER
 xfrm4_gc_thresh - INTEGER
 	The threshold at which we will start garbage collecting for IPv4
 	destination cache entries.  At twice this value the system will
-	refuse new allocations.
+	refuse new allocations. The value must be set below the flowcache
+	limit (4096 * number of online cpus) to take effect.
 
 igmp_link_local_mcast_reports - BOOLEAN
 	Enable IGMP reports for link local multicast groups in the
@@ -1660,7 +1663,8 @@ ratelimit - INTEGER
 xfrm6_gc_thresh - INTEGER
 	The threshold at which we will start garbage collecting for IPv6
 	destination cache entries.  At twice this value the system will
-	refuse new allocations.
+	refuse new allocations. The value must be set below the flowcache
+	limit (4096 * number of online cpus) to take effect.
 
 
 IPv6 Update by: