X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.common;h=c3f5af220113ed0f94c024a2b6f12e4e190e44b7;hb=8d4221eeaa14541d998a73854af7a5ef0dd9524b;hp=eb33df935263263e1442ec2f583f74b9454e25b0;hpb=1d1e5b598e760a8fefb1e484cbd052ab73076c59;p=oota-llvm.git diff --git a/Makefile.common b/Makefile.common index eb33df93526..c3f5af22011 100644 --- a/Makefile.common +++ b/Makefile.common @@ -26,42 +26,118 @@ # in the current directory. Also, if you want to build files in addition # to the local files, you can use the ExtraSource variable # +# 5. SourceDir - If specified, this specifies a directory that the source files +# are in, if they are not in the current directory. This should include a +# trailing / character. +# +# 6. LLVM_SRC_ROOT - If specified, points to the top of the LLVM source tree. +# +# 7. LLVM_OBJ_ROOT - If specified, points to the top directory where LLVM +# object files are placed. +# +# 8. BUILD_SRC_DIR - The directory which contains the current set of Makefiles +# and usually the source code too (unless SourceDir is set). +# +# 9. BUILD_SRC_ROOT - The root directory of the source code being compiled. +# +# 10. BUILD_OBJ_DIR - The directory where object code should be placed. +# +# 11. BUILD_OBJ_ROOT - The root directory for where object code should be +# placed. +# +# For building, +# LLVM, LLVM_SRC_ROOT = BUILD_SRC_ROOT, and +# LLVM_OBJ_ROOT = BUILD_OBJ_ROOT. #===-----------------------------------------------------------------------==== +# # Configuration file to set paths specific to local installation of LLVM # include $(LEVEL)/Makefile.config -# These are options that can either be enabled here, or can be enabled on the -# make command line (ie, make ENABLE_PROFILING=1) +########################################################################### +# Directory Configuration +# This section of the Makefile determines what is where. To be +# specific, there are several locations that need to be defined: +# +# o LLVM_SRC_ROOT : The root directory of the LLVM source code. +# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code. # +# o BUILD_SRC_DIR : The directory containing the code to build. +# o BUILD_SRC_ROOT : The root directory of the code to build. +# +# o BUILD_OBJ_DIR : The directory in which compiled code will be placed. +# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed. +# +########################################################################### -# When ENABLE_PROFILING is enabled, the llvm source base is built with profile -# information to allow gprof to be used to get execution frequencies. # -#ENABLE_PROFILING = 1 +# Set the source build directory. That is almost always the current directory. +# +ifndef BUILD_SRC_DIR +BUILD_SRC_DIR = $(shell pwd) +endif + +# +# Set the source root directory. +# +ifndef BUILD_SRC_ROOT +BUILD_SRC_ROOT = $(shell cd $(BUILD_SRC_DIR)/$(LEVEL); pwd) +endif -# When ENABLE_PURIFY is enabled, the LLVM tools are linked with purify (which -# must be locally installed) to allow for some automated memory error debugging. # -#ENABLE_PURIFY = 1 +# Determine the path of the source tree relative from $HOME (the mythical +# home directory). +# +HOME_OBJ_ROOT := $(OBJ_ROOT)$(patsubst $(HOME)%,%,$(BUILD_SRC_ROOT)) + +# +# Set the object build directory. Its location depends upon the source path +# and where object files should go. +# +ifndef BUILD_OBJ_DIR +ifeq ($(OBJ_ROOT),.) +BUILD_OBJ_DIR = $(BUILD_SRC_DIR) +else +BUILD_OBJ_DIR := $(HOME_OBJ_ROOT)$(patsubst $(BUILD_SRC_ROOT)%,%,$(BUILD_SRC_DIR)) +endif +endif -# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are -# turned on, and Debug builds are turned off. # -#ENABLE_OPTIMIZED = 1 +# Set the root of the object directory. +# +ifndef BUILD_OBJ_ROOT +ifeq ($(OBJ_ROOT),.) +BUILD_OBJ_ROOT = $(BUILD_SRC_ROOT) +else +BUILD_OBJ_ROOT := $(HOME_OBJ_ROOT) +endif +endif +# +# Set the LLVM source directory. +# It is typically the root directory of what we're compiling now. +# +ifndef LLVM_SRC_ROOT +LLVM_SRC_ROOT = $(BUILD_SRC_ROOT) +endif -# Figure out how to do platform specific stuff on this platform. This is really -# gross and should be autoconfiscated (automake actually), but should hopefully -# work on Linux and solaris (SunOS). # -UNAME := $(shell uname) -include $(LEVEL)/Makefile.$(UNAME) +# Set the LLVM object directory. +# +ifndef LLVM_OBJ_ROOT +LLVM_OBJ_ROOT = $(BUILD_OBJ_ROOT) +endif + +########################################################################### +# Default Targets: +# The following targets are the standard top level targets for +# building. +########################################################################### ifdef SHARED_LIBRARY # if SHARED_LIBRARY is specified, the default is to build the dynamic lib -dynamic :: +all:: dynamic endif # Default Rule: Make sure it's also a :: rule @@ -70,82 +146,168 @@ all :: # Default for install is to at least build everything... install :: +# Default rule for test. It ensures everything has a test rule +test:: -# Figure out which directory to build stuff into. We want to build into the -# /shared directory by default because it is guaranteed to be local to the -# current machine. -# -ifeq ($(LLVM_OBJ_DIR),.) -BUILD_ROOT = $(LLVM_OBJ_DIR) -BUILD_ROOT_TOP = $(LEVEL) -else +# Default rule for building only bytecode. +bytecode:: -BUILD_ROOT := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(shell pwd)) +# Print out the directories used for building +prdirs:: + echo "Home Offset : " $(HOME_OBJ_ROOT); + echo "Build Source Root: " $(BUILD_SRC_ROOT); + echo "Build Source Dir : " $(BUILD_SRC_DIR); + echo "Build Object Root: " $(BUILD_OBJ_ROOT); + echo "Build Object Dir : " $(BUILD_OBJ_DIR); + echo "LLVM Source Root: " $(LLVM_SRC_ROOT); + echo "LLVM Object Root: " $(LLVM_OBJ_ROOT); -# Calculate the BUILD_ROOT_TOP variable, which is the top of the llvm/ tree. -# Note that although this is just equal to $(BUILD_ROOT)/$(LEVEL), we cannot use -# this expression because some of the directories on the source tree may not -# exist in the build tree (for example the test/ heirarchy). Thus we evaluate -# the directory to eliminate the ../'s # -TOP_DIRECTORY := $(shell cd $(LEVEL); pwd) -BUILD_ROOT_TOP := $(LLVM_OBJ_DIR)$(patsubst $(HOME)%,%,$(TOP_DIRECTORY)) -endif +# Mark all of these targets as phony. This will hopefully speed up builds +# slightly since GNU Make will not try to find implicit rules for targets +# which are marked as Phony. +# +.PHONY: all dynamic clean distclean install test bytecode prdirs + +########################################################################### +# Miscellaneous paths and commands: +# This section defines various configuration macros, such as where +# to find burg, tblgen, and libtool. +########################################################################### #-------------------------------------------------------------------- # Variables derived from configuration options... #-------------------------------------------------------------------- #BinInstDir=/usr/local/bin -#LibInstDir=/usrl/local/lib/xxx +#LibInstDir=/usr/local/lib/xxx #DocInstDir=/usr/doc/xxx BURG_OPTS = -I -PURIFY := $(PURIFY) -cache-dir="$(BUILD_ROOT_TOP)/../purifycache" -chain-length="30" -messages=all - -# Shorthand for commonly accessed directories -LIBDEBUG := $(BUILD_ROOT_TOP)/lib/Debug -LIBRELEASE := $(BUILD_ROOT_TOP)/lib/Release -LIBPROFILE := $(BUILD_ROOT_TOP)/lib/Profile -TOOLDEBUG := $(BUILD_ROOT_TOP)/tools/Debug -TOOLRELEASE := $(BUILD_ROOT_TOP)/tools/Release -TOOLPROFILE := $(BUILD_ROOT_TOP)/tools/Profile +PURIFY := $(PURIFY) -cache-dir="$(BUILD_OBJ_ROOT)/../purifycache" -chain-length="30" -messages=all -# Verbosity levels -ifdef VERBOSE -VERB := +ifdef ENABLE_PROFILING + ENABLE_OPTIMIZED = 1 + CONFIGURATION := Profile else -VERB := @ + ifdef ENABLE_OPTIMIZED + CONFIGURATION := Release + else + CONFIGURATION := Debug + endif endif -#--------------------------------------------------------- -# Compilation options... -#--------------------------------------------------------- - -# Special tools used while building the LLVM tree. Burg is built as part of the -# utils directory. # -BURG := $(TOOLDEBUG)/burg -RunBurg := $(BURG) $(BURG_OPTS) - - # Enable this for profiling support with 'gprof' # This automatically enables optimized builds. +# ifdef ENABLE_PROFILING PROFILE = -pg - ENABLE_OPTIMIZED = 1 +endif + +# +# Suffixes for library compilation rules +# +.SUFFIXES: .so + +########################################################################### +# Library Locations: +# These variables describe various library locations: +# +# DEST* = Location of where libraries that are built will be placed. +# LLVM* = Location of LLVM libraries used for linking. +# PROJ* = Location of previously built libraries used for linking. +########################################################################### + +# Libraries that are being built +DESTLIBDEBUG := $(BUILD_OBJ_ROOT)/lib/Debug +DESTLIBRELEASE := $(BUILD_OBJ_ROOT)/lib/Release +DESTLIBPROFILE := $(BUILD_OBJ_ROOT)/lib/Profile +DESTLIBCURRENT := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) + +# LLVM libraries used for linking +LLVMLIBDEBUGSOURCE := $(LLVM_OBJ_ROOT)/lib/Debug +LLVMLIBRELEASESOURCE := $(LLVM_OBJ_ROOT)/lib/Release +LLVMLIBPROFILESOURCE := $(LLVM_OBJ_ROOT)/lib/Profile +LLVMLIBCURRENTSOURCE := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) + +# Libraries that were built that will now be used for linking +PROJLIBDEBUGSOURCE := $(BUILD_OBJ_ROOT)/lib/Debug +PROJLIBRELEASESOURCE := $(BUILD_OBJ_ROOT)/lib/Release +PROJLIBPROFILESOURCE := $(BUILD_OBJ_ROOT)/lib/Profile +PROJLIBCURRENTSOURCE := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) + +########################################################################### +# Tool Locations +# These variables describe various tool locations: +# +# DEST* = Location of where tools that are built will be placed. +# LLVM* = Location of LLVM tools used for building. +# PROJ* = Location of previously built tools used for linking. +########################################################################### + +DESTTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug +DESTTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release +DESTTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile +DESTTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) + +LLVMTOOLDEBUG := $(LLVM_OBJ_ROOT)/tools/Debug +LLVMTOOLRELEASE := $(LLVM_OBJ_ROOT)/tools/Release +LLVMTOOLPROFILE := $(LLVM_OBJ_ROOT)/tools/Profile +LLVMTOOLCURRENT := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) + +PROJTOOLDEBUG := $(BUILD_OBJ_ROOT)/tools/Debug +PROJTOOLRELEASE := $(BUILD_OBJ_ROOT)/tools/Release +PROJTOOLPROFILE := $(BUILD_OBJ_ROOT)/tools/Profile +PROJTOOLCURRENT := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) + +# +# Libtool is found in the current directory. +# +ifdef VERBOSE +LIBTOOL=$(LLVM_SRC_ROOT)/mklib else - PROFILE = +LIBTOOL=$(LLVM_SRC_ROOT)/mklib --silent endif +# +# Verbosity levels +# +ifndef VERBOSE +VERB := @ +endif + +########################################################################### +# Miscellaneous paths and commands (part deux): +# This section defines various configuration macros, such as where +# to find burg, tblgen, and libtool. +########################################################################### + +#-------------------------------------------------------------------------- +# Special tools used while building the LLVM tree. Burg is built as part +# of the utils directory. +#-------------------------------------------------------------------------- +BURG := $(LLVMTOOLCURRENT)/burg +RunBurg := $(BURG) $(BURG_OPTS) + +TBLGEN := $(LLVMTOOLCURRENT)/tblgen + + +########################################################################### +# Compile Time Flags +########################################################################### + +# +# Include both the project headers and the LLVM headers for compilation and +# dependency computation. +# +CPPFLAGS += -I$(BUILD_SRC_ROOT)/include -I$(LLVM_SRC_ROOT)/include + # By default, strip symbol information from executable -ifdef KEEP_SYMBOLS -STRIP = -STRIP_WARN_MSG = -else +ifndef KEEP_SYMBOLS STRIP = $(PLATFORMSTRIPOPTS) -STRIP_WARN_MSG = "(without symbols) " +STRIP_WARN_MSG = "(without symbols)" endif # Allow gnu extensions... @@ -155,45 +317,78 @@ CPPFLAGS += -D_GNU_SOURCE CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions -fshort-enums +# +# Compile commands with libtool. +# +Compile := $(LIBTOOL) --mode=compile $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) +CompileC := $(LIBTOOL) --mode=compile $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts) + +# +# Add the LLVM specific "-only-static" option so that we only compile .o files +# once when not building a shared library. +# +# For shared libraries, we will end up building twice, but that doesn't happen +# very often, so we'll let it go. +# +ifndef SHARED_LIBRARY +Compile := $(Compile) -only-static +CompileC := $(CompileC) -only-static +endif + # Compile a cpp file, don't link... -Compile := $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) CompileG := $(Compile) -g -D_DEBUG CompileO := $(Compile) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer CompileP := $(Compile) $(CompileOptimizeOpts) -felide-constructors $(PROFILE) # Compile a c file, don't link... -CompileC := $(CC) -c $(CPPFLAGS) $(CCFLAGS) $(CompileCommonOpts) CompileCG := $(CompileC) -g -D_DEBUG -CompileCO := $(CompileC) $(CompileOptimizeOpts) -felide-constructors -fomit-frame-pointer -CompileCP := $(CompileC) $(CompileOptimizeOpts) -felide-constructors $(PROFILE) +CompileCO := $(CompileC) $(CompileOptimizeOpts) -fomit-frame-pointer +CompileCP := $(CompileC) $(CompileOptimizeOpts) $(PROFILE) +########################################################################### +# Link Time Options +########################################################################### +# # Link final executable - +# (Note that we always link with the C++ compiler). +# ifdef ENABLE_PURIFY # To enable purify, build with 'gmake ENABLE_PURIFY=1' -Link := $(PURIFY) $(CXX) -static +Link := $(PURIFY) $(LIBTOOL) --mode=link $(CXX) -static else -Link := $(CXX) +Link := $(LIBTOOL) --mode=link $(CXX) endif -LinkG := $(Link) -g -L$(LIBDEBUG) $(STRIP) -LinkO := $(Link) -O3 -L$(LIBRELEASE) -LinkP := $(Link) -O3 -L$(LIBPROFILE) $(PROFILE) + +# link both projlib and llvmlib libraries +LinkG := $(Link) -g -L$(PROJLIBDEBUGSOURCE) -L$(LLVMLIBDEBUGSOURCE) $(STRIP) +LinkO := $(Link) -O3 -L$(PROJLIBRELEASESOURCE) -L$(LLVMLIBRELEASESOURCE) +LinkP := $(Link) -O3 -L$(PROJLIBPROFILESOURCE) -L$(LLVMLIBPROFILESOURCE) $(PROFILE) # Create one .o file from a bunch of .o files... -Relink = ld -r +Relink = ${LIBTOOL} --mode=link $(CXX) # MakeSO - Create a .so file from a .o files... -MakeSO := $(CXX) $(MakeSharedObjectOption) -MakeSOO := $(MakeSO) -O3 -MakeSOP := $(MakeSOO) $(PROFILE) +#MakeSO := $(LIBTOOL) --mode=link $(CXX) $(MakeSharedObjectOption) +#MakeSOO := $(MakeSO) -O3 +#MakeSOP := $(MakeSOO) $(PROFILE) + +# +# Configure where the item being compiled should go. +# +ifdef SHARED_LIBRARY +Link := $(Link) -rpath $(DESTLIBCURRENT) +endif + +ifdef TOOLNAME +Link := $(Link) -rpath $(DESTTOOLCURRENT) +endif # Create dependancy file from CPP file, send to stdout. Depend := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS) DependC := $(CC) -MM -I$(LEVEL)/include $(CPPFLAGS) # Archive a bunch of .o files into a .a file... -AR = ar cq -BISON = bison +AR = ${AR_PATH} cq #---------------------------------------------------------- @@ -205,18 +400,17 @@ ifndef Source Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l) endif -Objs := $(sort $(patsubst Debug/%.o, %.o, $(addsuffix .o,$(basename $(Source))))) -ObjectsO := $(addprefix $(BUILD_ROOT)/Release/,$(Objs)) -ObjectsP := $(addprefix $(BUILD_ROOT)/Profile/,$(Objs)) -ObjectsG := $(addprefix $(BUILD_ROOT)/Debug/,$(Objs)) - +Objs := $(sort $(patsubst Debug/%.lo, %.lo, $(addsuffix .lo,$(notdir $(basename $(Source)))))) +ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs)) +ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs)) +ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs)) #--------------------------------------------------------- # Handle the DIRS and PARALLEL_DIRS options #--------------------------------------------------------- ifdef DIRS -all install clean test :: +all install clean test bytecode :: $(VERB) for dir in ${DIRS}; do \ (cd $$dir; $(MAKE) $@) || exit 1; \ done @@ -224,15 +418,30 @@ endif # Handle PARALLEL_DIRS ifdef PARALLEL_DIRS -all :: $(addsuffix /.makeall , $(PARALLEL_DIRS)) -install :: $(addsuffix /.makeinstall, $(PARALLEL_DIRS)) -clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS)) -test :: $(addsuffix /.maketest , $(PARALLEL_DIRS)) +all :: $(addsuffix /.makeall , $(PARALLEL_DIRS)) +install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS)) +clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS)) +test :: $(addsuffix /.maketest , $(PARALLEL_DIRS)) +bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS)) -%/.makeall %/.makeinstall %/.makeclean %/.maketest: +%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode: $(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@) endif +# Handle directories that may or may not exist +ifdef OPTIONAL_DIRS +all install clean test bytecode :: + $(VERB) for dir in ${OPTIONAL_DIRS}; do \ + if [ -d $$dir ]; \ + then\ + (cd $$dir; $(MAKE) $@) || exit 1; \ + fi \ + done +endif + +########################################################################### +# Library Build Rules: +# #--------------------------------------------------------- # Handle the LIBRARYNAME option - used when building libs... #--------------------------------------------------------- @@ -249,95 +458,93 @@ endif # it's built as a .o file, then all of the constituent .o files in it will be # linked into tools (for example gccas) even if they only use one of the parts # of it. For this reason, sometimes it's useful to use libraries as .a files. +########################################################################### ifdef LIBRARYNAME # Make sure there isn't any extranous whitespace on the LIBRARYNAME option LIBRARYNAME := $(strip $(LIBRARYNAME)) -LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so -LIBNAME_P := $(LIBPROFILE)/lib$(LIBRARYNAME).so -LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so -LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a -LIBNAME_AP := $(LIBPROFILE)/lib$(LIBRARYNAME).a -LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a -LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o -LIBNAME_OBJP := $(LIBPROFILE)/$(LIBRARYNAME).o -LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o +LIBNAME_O := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so +LIBNAME_P := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so +LIBNAME_G := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so +LIBNAME_AO := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a +LIBNAME_AP := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a +LIBNAME_AG := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a +LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o +LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o +LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o + +#-------------------------------------------------------------------- +# Library Targets +# Modify the top level targets to build the desired libraries. +#-------------------------------------------------------------------- +# dynamic target builds a shared object version of the library... +dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so -ifndef ENABLE_OPTIMIZED -BUILD_LIBNAME_G := $(LIBNAME_G) +# Does the library want a .o version built? ifndef DONT_BUILD_RELINKED -BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG) -endif -ifdef BUILD_ARCHIVE -BUILD_LIBNAME_AG := $(LIBNAME_AG) -endif +all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o endif -# If optimized builds are enabled... -ifdef ENABLE_OPTIMIZED - ifdef ENABLE_PROFILING - BUILD_LIBNAME_O := $(LIBNAME_P) - ifndef DONT_BUILD_RELINKED - BUILD_LIBNAME_OBJO := $(LIBNAME_OBJP) - endif - ifdef BUILD_ARCHIVE - BUILD_LIBNAME_AO := $(LIBNAME_AP) - endif - else - BUILD_LIBNAME_O := $(LIBNAME_O) - ifndef DONT_BUILD_RELINKED - BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO) - endif - ifdef BUILD_ARCHIVE - BUILD_LIBNAME_AO := $(LIBNAME_AO) - endif - endif +# Does the library want an archive version built? +ifdef BUILD_ARCHIVE +all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a endif -all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug -all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release -all:: $(BUILD_LIBNAME_AP) $(BUILD_LIBNAME_OBJP) # Profile -dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) $(BUILD_LIBNAME_P) # .so files +#-------------------------------------------------------------------- +# Rules for building libraries +#-------------------------------------------------------------------- -$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir - @echo ======= Linking $(LIBRARYNAME) release library ======= - $(VERB) $(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts) +# +# Rules for building dynamically linked libraries. +# +$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir + @echo ======= Linking $(LIBRARYNAME) dynamic release library ======= + $(VERB) $(Link) -o $*.la $(ObjectsO) $(LibSubDirs) $(LibLinkOpts); + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); -$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir - @echo ======= Linking $(LIBRARYNAME) profile library ======= - $(VERB) $(MakeSOP) -o $@ $(ObjectsP) $(LibSubDirs) $(LibLinkOpts) +$(LIBNAME_P): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir + @echo ======= Linking $(LIBRARYNAME) dynamic profile library ======= + $(VERB) $(Link) -o $*.la $(ObjectsP) $(LibSubDirs) $(LibLinkOpts); + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); -$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir - @echo ======= Linking $(LIBRARYNAME) debug library ======= - $(VERB) $(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts) +$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir + @echo ======= Linking $(LIBRARYNAME) dynamic debug library ======= + $(VERB) $(Link) -o $*.la $(ObjectsG) $(LibSubDirs) $(LibLinkOpts); + $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT); -$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir - @echo ======= Linking $(LIBRARYNAME) release library ======= - @rm -f $@ - $(VERB) $(AR) $@ $(ObjectsO) $(LibSubDirs) +# +# Rules for building static archive libraries. +# +$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir + @echo ======= Linking $(LIBRARYNAME) archive release library ======= + @$(RM) -f $@ + $(VERB) $(Link) -03 -o $@ $(ObjectsO) $(LibSubDirs) -static -$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir - @echo ======= Linking $(LIBRARYNAME) profile library ======= - @rm -f $@ - $(VERB) $(AR) $@ $(ObjectsP) $(LibSubDirs) +$(LIBNAME_AP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir + @echo ======= Linking $(LIBRARYNAME) archive profile library ======= + @$(RM) -f $@ + $(VERB) $(Link) -03 $(PROFILE) -o $@ $(ObjectsP) $(LibSubDirs) -static -$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir - @echo ======= Linking $(LIBRARYNAME) debug library ======= - @rm -f $@ - $(VERB) $(AR) $@ $(ObjectsG) $(LibSubDirs) +$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir + @echo ======= Linking $(LIBRARYNAME) archive debug library ======= + @$(RM) -f $@ + $(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static -$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir +# +# Rules for building .o libraries. +# +$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(DESTLIBRELEASE)/.dir @echo "Linking $@" $(VERB) $(Relink) -o $@ $(ObjectsO) $(LibSubDirs) -$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(LIBPROFILE)/.dir +$(LIBNAME_OBJP): $(ObjectsP) $(LibSubDirs) $(DESTLIBPROFILE)/.dir @echo "Linking $@" $(VERB) $(Relink) -o $@ $(ObjectsP) $(LibSubDirs) -$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir +$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir @echo "Linking $@" $(VERB) $(Relink) -o $@ $(ObjectsG) $(LibSubDirs) @@ -347,11 +554,16 @@ endif # Create a TAGS database for emacs #------------------------------------------------------------------------ +ifdef ETAGS ifeq ($(LEVEL), .) tags: - etags -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'` + $(ETAGS) -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'` all:: tags endif +else +tags: + ${ECHO} "Cannot build $@: The program etags is not installed" +endif #------------------------------------------------------------------------ # Handle the TOOLNAME option - used when building tool executables... @@ -365,36 +577,45 @@ endif ifdef TOOLNAME # TOOLEXENAME* - These compute the output filenames to generate... -TOOLEXENAME_G := $(BUILD_ROOT_TOP)/tools/Debug/$(TOOLNAME) -TOOLEXENAME_O := $(BUILD_ROOT_TOP)/tools/Release/$(TOOLNAME) -TOOLEXENAME_P := $(BUILD_ROOT_TOP)/tools/Profile/$(TOOLNAME) - -ifndef ENABLE_OPTIMIZED - TOOLEXENAMES := $(TOOLEXENAME_G) -else - ifdef ENABLE_PROFILING - TOOLEXENAMES := $(TOOLEXENAME_P) - else - TOOLEXENAMES := $(TOOLEXENAME_O) - endif -endif +TOOLEXENAME_G := $(DESTTOOLDEBUG)/$(TOOLNAME) +TOOLEXENAME_O := $(DESTTOOLRELEASE)/$(TOOLNAME) +TOOLEXENAME_P := $(DESTTOOLPROFILE)/$(TOOLNAME) +TOOLEXENAMES := $(DESTTOOLCURRENT)/$(TOOLNAME) # USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc. -USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) -USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS)) -USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS)) -USED_LIBS_OPTIONS_P := $(patsubst %.o, $(LIBPROFILE)/%.o,$(USED_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) +PROJ_LIBS_OPTIONS_G := $(patsubst %.o, $(PROJLIBDEBUGSOURCE)/%.o, $(PROJ_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS_O := $(patsubst %.o, $(PROJLIBRELEASESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) +PROJ_LIBS_OPTIONS_P := $(patsubst %.o, $(PROJLIBPROFILESOURCE)/%.o,$(PROJ_LIBS_OPTIONS)) + +LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) +LLVM_LIBS_OPTIONS_G := $(patsubst %.o, $(LLVMLIBDEBUGSOURCE)/%.o, $(LLVM_LIBS_OPTIONS)) +LLVM_LIBS_OPTIONS_O := $(patsubst %.o, $(LLVMLIBRELEASESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) +LLVM_LIBS_OPTIONS_P := $(patsubst %.o, $(LLVMLIBPROFILESOURCE)/%.o,$(LLVM_LIBS_OPTIONS)) +LIB_OPTS_G := $(LLVM_LIBS_OPTIONS_G) $(PROJ_LIBS_OPTIONS_G) +LIB_OPTS_O := $(LLVM_LIBS_OPTIONS_O) $(PROJ_LIBS_OPTIONS_O) +LIB_OPTS_P := $(LLVM_LIBS_OPTIONS_P) $(PROJ_LIBS_OPTIONS_P) # USED_LIB_PATHS - Compute the path of the libraries used so that tools are # rebuilt if libraries change. This has to make sure to handle .a/.so and .o -# files seperately. +# files separately. # STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) -USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS)) -USED_LIB_PATHS_P := $(addprefix $(LIBPROFILE)/, $(STATICUSEDLIBS)) -LINK_OPTS := $(TOOLLINKOPTS) $(PLATFORMLINKOPTS) +USED_LIB_PATHS_G := $(addprefix $(DESTLIBDEBUG)/, $(STATICUSEDLIBS)) +USED_LIB_PATHS_O := $(addprefix $(DESTLIBRELEASE)/, $(STATICUSEDLIBS)) +USED_LIB_PATHS_P := $(addprefix $(DESTLIBPROFILE)/, $(STATICUSEDLIBS)) +#LINK_OPTS := $(TOOLLINKOPTS) $(PLATFORMLINKOPTS) + +# +# Libtool link options: +# Ensure that all binaries have their symbols exported so that they can +# by dlsym'ed. +# +LINK_OPTS := -export-dynamic $(TOOLLINKOPTS) + + + # Tell make that we need to rebuild subdirectories before we can link the tool. @@ -403,58 +624,99 @@ $(USED_LIB_PATHS_G) $(USED_LIB_PATHS_O) $(USED_LIB_PATHS_P): \ $(addsuffix /.makeall, $(PARALLEL_DIRS)) all:: $(TOOLEXENAMES) + clean:: - $(VERB) rm -f $(TOOLEXENAMES) + $(VERB) $(RM) -f $(TOOLEXENAMES) -$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(TOOLDEBUG)/.dir +$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(DESTTOOLDEBUG)/.dir @echo ======= Linking $(TOOLNAME) debug executable $(STRIP_WARN_MSG) ======= - $(VERB) $(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(LINK_OPTS) + $(VERB) $(LinkG) -o $@ $(ObjectsG) $(LIB_OPTS_G) $(LINK_OPTS) $(LIBS) -$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(TOOLRELEASE)/.dir +$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(DESTTOOLRELEASE)/.dir @echo ======= Linking $(TOOLNAME) release executable ======= - $(VERB) $(LinkO) -o $@ $(ObjectsO) $(USED_LIBS_OPTIONS_O) $(LINK_OPTS) + $(VERB) $(LinkO) -o $@ $(ObjectsO) $(LIB_OPTS_O) $(LINK_OPTS) $(LIBS) -$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(TOOLPROFILE)/.dir +$(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir @echo ======= Linking $(TOOLNAME) profile executable ======= - $(VERB) $(LinkP) -o $@ $(ObjectsP) $(USED_LIBS_OPTIONS_P) $(LINK_OPTS) + $(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS) endif #--------------------------------------------------------- -.PRECIOUS: $(BUILD_ROOT)/Depend/.dir -.PRECIOUS: $(BUILD_ROOT)/Debug/.dir $(BUILD_ROOT)/Release/.dir +.PRECIOUS: $(BUILD_OBJ_DIR)/Depend/.dir +.PRECIOUS: $(BUILD_OBJ_DIR)/Debug/.dir $(BUILD_OBJ_DIR)/Release/.dir -# Create dependencies for the *.cpp files... -$(BUILD_ROOT)/Depend/%.d: %.cpp $(BUILD_ROOT)/Depend/.dir - $(VERB) $(Depend) $< | sed 's|$*\.o *|$(BUILD_ROOT)/Release/& $(BUILD_ROOT)/Profile/& $(BUILD_ROOT)/Debug/& $(BUILD_ROOT)/Depend/$(@F)|g' > $@ +# Create .o files in the ObjectFiles directory from the .cpp and .c files... +#$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir + #@echo "Compiling $<" + #$(VERB) $(CompileO) $< -o $@ -# Create dependencies for the *.c files... -$(BUILD_ROOT)/Depend/%.d: %.c $(BUILD_ROOT)/Depend/.dir - $(VERB) $(DependC) $< | sed 's|$*\.o *|Release/& Profile/& Debug/& Depend/$(@F)|g' > $@ +#$(BUILD_OBJ_DIR)/Release/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir + #$(VERB) $(CompileCO) $< -o $@ -# Create .o files in the ObjectFiles directory from the .cpp and .c files... -$(BUILD_ROOT)/Release/%.o: %.cpp $(BUILD_ROOT)/Release/.dir +#$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir + #@echo "Compiling $<" + #$(VERB) $(CompileP) $< -o $@ + +#$(BUILD_OBJ_DIR)/Profile/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir + #@echo "Compiling $<" + #$(VERB) $(CompileCP) $< -o $@ + +#$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir + #@echo "Compiling $<" + #$(VERB) $(CompileG) $< -o $@ + +#$(BUILD_OBJ_DIR)/Debug/%.o: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir + #$(VERB) $(CompileCG) $< -o $@ + +# Create .lo files in the ObjectFiles directory from the .cpp and .c files... +$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir @echo "Compiling $<" $(VERB) $(CompileO) $< -o $@ -$(BUILD_ROOT)/Release/%.o: %.c $(BUILD_ROOT)/Release/.dir +$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir + @echo "Compiling $<" $(VERB) $(CompileCO) $< -o $@ -$(BUILD_ROOT)/Profile/%.o: %.cpp $(BUILD_ROOT)/Profile/.dir +$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir @echo "Compiling $<" $(VERB) $(CompileP) $< -o $@ -$(BUILD_ROOT)/Profile/%.o: %.c $(BUILD_ROOT)/Profile/.dir +$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir @echo "Compiling $<" $(VERB) $(CompileCP) $< -o $@ -$(BUILD_ROOT)/Debug/%.o: %.cpp $(BUILD_ROOT)/Debug/.dir +$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir @echo "Compiling $<" $(VERB) $(CompileG) $< -o $@ -$(BUILD_ROOT)/Debug/%.o: %.c $(BUILD_ROOT)/Debug/.dir +$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir + @echo "Compiling $<" + $(VERB) $(CompileCG) $< -o $@ + +# Create .lo files in the ObjectFiles directory from the .cpp and .c files... +$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Release/.dir + @echo "Compiling $<" + $(VERB) $(CompileO) $< -o $@ + +$(BUILD_OBJ_DIR)/Release/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Release/.dir + $(VERB) $(CompileCO) $< -o $@ + +$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Profile/.dir + @echo "Compiling $<" + $(VERB) $(CompileP) $< -o $@ + +$(BUILD_OBJ_DIR)/Profile/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Profile/.dir + @echo "Compiling $<" + $(VERB) $(CompileCP) $< -o $@ + +$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Debug/.dir + @echo "Compiling $<" + $(VERB) $(CompileG) $< -o $@ + +$(BUILD_OBJ_DIR)/Debug/%.lo: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Debug/.dir $(VERB) $(CompileCG) $< -o $@ # @@ -475,37 +737,81 @@ YACC_OUTPUT = $(addprefix $(YACC_FILES:%.y=%), .h .cpp .output) # FIXME. (f.e. char Buffer[10000]; ) # %.cpp: %.l - flex -t $< | sed '/^find_rule/d' | \ - sed 's/void yyunput/inline void yyunput/' | \ - sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ - sed 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' > $@ + $(FLEX) -t $< | $(SED) '/^find_rule/d' | \ + $(SED) 's/void yyunput/inline void yyunput/' | \ + $(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \ + $(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' > $@ # Rule for building the bison parsers... - +%.c: %.y # Cancel built-in rules for yacc +%.h: %.y # Cancel built-in rules for yacc %.cpp %.h : %.y + @echo Bison\'ing $<... $(VERB) $(BISON) -v -d -p $(<:%Parser.y=%) $*.y - $(VERB) mv -f $*.tab.c $*.cpp - $(VERB) mv -f $*.tab.h $*.h + $(VERB) ${MV} -f $*.tab.c $*.cpp + $(VERB) ${MV} -f $*.tab.h $*.h # To create the directories... %/.dir: - $(VERB) mkdir -p $* - @date > $@ + $(VERB) ${MKDIR} $* > /dev/null + @$(DATE) > $@ # To create postscript files from dot files... +ifdef DOT %.ps: %.dot - dot -Tps < $< > $@ + ${DOT} -Tps < $< > $@ +else +%.ps: %.dot + ${ECHO} "Cannot build $@: The program dot is not installed" +endif # 'make clean' nukes the tree clean:: - $(VERB) rm -rf $(BUILD_ROOT)/Debug $(BUILD_ROOT)/Release $(BUILD_ROOT)/Profile $(BUILD_ROOT)/Depend - $(VERB) rm -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc - $(VERB) rm -f $(LEX_OUTPUT) $(YACC_OUTPUT) - -# If dependancies were generated for the file that included this file, + $(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend + $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc + $(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT) + +distclean:: clean + $(VERB) (cd $(LLVM_SRC_ROOT); $(RM) -rf $(LEVEL)/Makefile.config \ + $(LEVEL)/include/Config/config.h \ + $(LEVEL)/autom4te.cache \ + $(LEVEL)/config.log) + +########################################################################### +# C/C++ Dependencies +# Define variables and rules that generate header file dependencies +# from C/C++ source files. +########################################################################### + +# If dependencies were generated for the file that included this file, # include the dependancies now... # -SourceDepend := $(addsuffix .d,$(addprefix $(BUILD_ROOT)/Depend/,$(basename $(filter-out Debug/%, $(Source))))) +SourceBaseNames := $(basename $(notdir $(filter-out Debug/%, $(Source)))) +SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d) + +# +# Depend target: +# This allows a user to manually ask for an update in the dependencies +# +depend: $(SourceDepend) + + +# Create dependencies for the *.cpp files... +#$(SourceDepend): \x +$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.cpp $(BUILD_OBJ_DIR)/Depend/.dir + $(VERB) $(Depend) $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ + +# Create dependencies for the *.c files... +#$(SourceDepend): \x +$(BUILD_OBJ_DIR)/Depend/%.d: $(SourceDir)%.c $(BUILD_OBJ_DIR)/Depend/.dir + $(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@ + +# +# Include dependencies generated from C/C++ source files, but not if we +# are cleaning (this example taken from the GNU Make Manual). +# +ifneq ($(MAKECMDGOALS),clean) ifneq ($(SourceDepend),) -include $(SourceDepend) endif +endif