X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.rules;h=59eec663afa0d52f555b6021b3151a3150f5703a;hb=1fc37395607e374be50d09a89b63b2b318e653bf;hp=d3a6585e3663fbf2357f0b838f217791d6c042c3;hpb=b6d59a29ea3b7b0033d1d8a6a4c9a13972b880d0;p=oota-llvm.git

diff --git a/Makefile.rules b/Makefile.rules
index d3a6585e366..59eec663afa 100644
--- a/Makefile.rules
+++ b/Makefile.rules
@@ -1,11 +1,11 @@
-#===-- Makefile.rules - Common make rules for LLVM -------*- makefile -*--====
-# 
+#===-- Makefile.rules - Common make rules for LLVM ---------*- Makefile -*--===#
+#
 #                     The LLVM Compiler Infrastructure
 #
 # This file was developed by the LLVM research group and is distributed under
 # the University of Illinois Open Source License. See LICENSE.TXT for details.
 # 
-##===----------------------------------------------------------------------===##
+#===------------------------------------------------------------------------===#
 #
 # This file is included by all of the LLVM makefiles.  This file defines common
 # rules to do things like compile a .cpp file or generate dependency info.
@@ -71,12 +71,14 @@ all::$(LLVM_OBJ_ROOT)/config.status
 ifdef SHARED_LIBRARY
 # if SHARED_LIBRARY is specified, the default is to build the dynamic lib
 all:: dynamic
+install:: install-dynamic-library
 endif
 
 ifdef BYTECODE_LIBRARY
 # if BYTECODE_LIBRARY is specified, the default is to build the bytecode lib
 all:: bytecodelib
-install:: bytecodelib-install
+install:: install-bytecode-library
+install-bytecode:: install-bytecode-library
 endif
 
 # Default Rule:  Make sure it's also a :: rule
@@ -91,6 +93,9 @@ test::
 # Default rule for building only bytecode.
 bytecode::
 
+# Default rule for installing only bytecode.
+install-bytecode::
+
 # Print out the directories used for building
 prdirs::
 	@${ECHO} "Build Source Root: " $(BUILD_SRC_ROOT)
@@ -108,7 +113,7 @@ prdirs::
 ###########################################################################
 .SUFFIXES:
 .SUFFIXES: .c .cpp .h .hpp .y .l
-.SUFFIXES: .lo .o .a .so .bc .td
+.SUFFIXES: .lo .o .a $(SHLIBEXT) .bc .td
 .SUFFIXES: .ps .dot .d
 
 #
@@ -116,7 +121,7 @@ prdirs::
 # slightly since GNU Make will not try to find implicit rules for targets
 # which are marked as Phony.
 #
-.PHONY: all dynamic bytecodelib bytecodelib-install
+.PHONY: all dynamic bytecodelib install-bytecode-library
 .PHONY: clean distclean install test bytecode prdirs
 
 ###########################################################################
@@ -129,10 +134,6 @@ prdirs::
 # Variables derived from configuration options... 
 #--------------------------------------------------------------------
 
-#BinInstDir=/usr/local/bin
-#LibInstDir=/usr/local/lib/xxx
-#DocInstDir=/usr/doc/xxx
-
 BURG_OPTS = -I
 
 ifdef ENABLE_PROFILING
@@ -243,17 +244,16 @@ endif
 #--------------------------------------------------------------------------
 # Utilities used while building the LLVM tree, which live in the utils dir
 #
-BURG    := $(LLVMTOOLCURRENT)/burg
-RunBurg := $(BURG) $(BURG_OPTS)
-TBLGEN  := $(LLVMTOOLCURRENT)/tblgen
+BURG       := $(LLVMTOOLCURRENT)/burg
+RunBurg    := $(BURG) $(BURG_OPTS)
+TBLGEN     := $(LLVMTOOLCURRENT)/tblgen
+LGCCLDPROG := $(LLVMTOOLCURRENT)/gccld
 
 #--------------------------------------------------------------------------
 # The LLVM GCC front-end in C and C++ flavors
 #
 LLVMGCC := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/gcc
-LCC1    := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1
 LLVMGXX := PATH=$(LLVMTOOLCURRENT):$(PATH) $(LLVMGCCDIR)/bin/g++
-LCC1XX  := $(LLVMGCCDIR)/libexec/gcc/$(LLVMGCCARCH)/cc1plus
 
 #--------------------------------------------------------------------------
 # Some of the compiled LLVM tools which are used for compilation of runtime
@@ -293,8 +293,10 @@ CPPFLAGS += -D_GNU_SOURCE
 # Pull in limit macros from stdint.h, even in C++:
 CPPFLAGS += -D__STDC_LIMIT_MACROS
 
-CompileWarnings  := -Wall -W  -Wwrite-strings -Wno-unused
-CompileCommonOpts := $(CompileWarnings) -fshort-enums
+### FIXME: this is GCC specific
+CPPFLAGS += -DATTR_DEPRECATED='__attribute__ ((deprecated))'
+
+CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
 CompileOptimizeOpts := -O3 -DNDEBUG -finline-functions
 
 #
@@ -357,7 +359,7 @@ Depend   := $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
 DependC  := $(CC)  -MM -I$(LEVEL)/include $(CPPFLAGS) 
 
 # Archive a bunch of .o files into a .a file...
-AR       = ${AR_PATH} cq 
+AR       = $(AR_PATH) cr
 
 #----------------------------------------------------------
 
@@ -367,18 +369,18 @@ AR       = ${AR_PATH} cq
 # 
 ifndef Source
 Source  := $(notdir $(ExtraSource) $(wildcard $(SourceDir)/*.cpp \
-                    $(SourceDir)/*.c $(SourceDir)/*.y $(SourceDir)/*.l))
+                    $(SourceDir)/*.cc $(SourceDir)/*.c $(SourceDir)/*.y \
+                    $(SourceDir)/*.l))
 endif
 
 #
 # Libtool Objects
 #
 Srcs := $(sort $(basename $(Source)))
-Objs := $(addsuffix .lo, $(Srcs))
-ObjectsO := $(addprefix $(BUILD_OBJ_DIR)/Release/,$(Objs))
-ObjectsP := $(addprefix $(BUILD_OBJ_DIR)/Profile/,$(Objs))
-ObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(Objs))
-ObjectsBC := $(addprefix $(BUILD_OBJ_DIR)/BytecodeObj/,$(addsuffix .bc, $(Srcs)))
+ObjectsO  := $(Srcs:%=$(BUILD_OBJ_DIR)/Release/%.lo)
+ObjectsP  := $(Srcs:%=$(BUILD_OBJ_DIR)/Profile/%.lo)
+ObjectsG  := $(Srcs:%=$(BUILD_OBJ_DIR)/Debug/%.lo)
+ObjectsBC := $(Srcs:%=$(BUILD_OBJ_DIR)/BytecodeObj/%.bc)
 
 #
 # The real objects underlying the libtool objects
@@ -393,9 +395,14 @@ RObjectsG := $(addprefix $(BUILD_OBJ_DIR)/Debug/,$(RObjs))
 #---------------------------------------------------------
 
 ifdef DIRS
-all install clean test bytecode ::
+all install clean test bytecode stripped-bytecode install-bytecode::
 	$(VERB) for dir in ${DIRS}; do \
-		(cd $$dir; $(MAKE) $@) || exit 1; \
+		if [ ! -f $$dir/Makefile ]; \
+		then \
+			$(MKDIR) $$dir; \
+			cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+		fi; \
+		($(MAKE) -C $$dir $@ $(MFLAGS)) || exit 1; \
 	done
 endif
 
@@ -406,18 +413,30 @@ install  :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS))
 clean    :: $(addsuffix /.makeclean   , $(PARALLEL_DIRS))
 test     :: $(addsuffix /.maketest    , $(PARALLEL_DIRS))
 bytecode :: $(addsuffix /.makebytecode, $(PARALLEL_DIRS))
-
-%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode:
-	$(VERB) cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
+stripped-bytecode :: $(addsuffix /.makestripped-bytecode, $(PARALLEL_DIRS))
+install-bytecode :: $(addsuffix /.makeinstall-bytecode, $(PARALLEL_DIRS))
+
+%/.makeall %/.makeinstall %/.makeclean %/.maketest %/.makebytecode %/.makestripped-bytecode %/.makeinstall-bytecode:
+	$(VERB) if [ ! -f $(@D)/Makefile ]; \
+	then \
+		$(MKDIR) $(@D); \
+		cp $(SourceDir)/$(@D)/Makefile $(@D)/Makefile; \
+	fi; \
+	$(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) $(MFLAGS)
 endif
 
 # Handle directories that may or may not exist
 ifdef OPTIONAL_DIRS
-all install clean test bytecode ::
+all install clean test bytecode stripped-bytecode install-bytecode::
 	$(VERB) for dir in ${OPTIONAL_DIRS}; do \
-		if [ -d $$dir ]; \
+		if [ -d $(SourceDir)/$$dir ]; \
 		then\
-			(cd $$dir; $(MAKE) $@) || exit 1; \
+			if [ ! -f $$dir/Makefile ]; \
+			then \
+				$(MKDIR) $$dir; \
+				cp $(SourceDir)/$$dir/Makefile $$dir/Makefile; \
+			fi; \
+			($(MAKE) -C$$dir $@ $(MFLAGS)) || exit 1; \
 		fi \
 	done
 endif
@@ -443,44 +462,55 @@ endif
 #  of it.  For this reason, sometimes it's useful to use libraries as .a files.
 ###########################################################################
 
+# Install rule for making bytecode library directory if it does not exist.
+# Trigger this by making libraries that need to be installed here depend on it.
+$(DESTDIR)$(bytecode_libdir):
+	$(MKDIR) $@
+
 ifdef LIBRARYNAME
 
 # Make sure there isn't any extranous whitespace on the LIBRARYNAME option
 LIBRARYNAME := $(strip $(LIBRARYNAME))
 
-LIBNAME_O    := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).so
-LIBNAME_P    := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).so
-LIBNAME_G    := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).so
+LIBNAME_O    := $(DESTLIBRELEASE)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_P    := $(DESTLIBPROFILE)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_G    := $(DESTLIBDEBUG)/lib$(LIBRARYNAME)$(SHLIBEXT)
+LIBNAME_CUR  := $(DESTLIBCURRENT)/lib$(LIBRARYNAME)$(SHLIBEXT)
 LIBNAME_AO   := $(DESTLIBRELEASE)/lib$(LIBRARYNAME).a
 LIBNAME_AP   := $(DESTLIBPROFILE)/lib$(LIBRARYNAME).a
 LIBNAME_AG   := $(DESTLIBDEBUG)/lib$(LIBRARYNAME).a
+LIBNAME_ACUR := $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
 LIBNAME_OBJO := $(DESTLIBRELEASE)/$(LIBRARYNAME).o
 LIBNAME_OBJP := $(DESTLIBPROFILE)/$(LIBRARYNAME).o
 LIBNAME_OBJG := $(DESTLIBDEBUG)/$(LIBRARYNAME).o
+LIBNAME_OBJCUR := $(DESTLIBCURRENT)/$(LIBRARYNAME).o
 LIBNAME_BC   := $(DESTLIBBYTECODE)/lib$(LIBRARYNAME).bc
 
+
 #--------------------------------------------------------------------
 # Library Targets
 #	Modify the top level targets to build the desired libraries.
 #--------------------------------------------------------------------
 
 # dynamic target builds a shared object version of the library...
-dynamic:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).so
+dynamic:: $(LIBNAME_CUR)
 bytecodelib:: $(LIBNAME_BC)
-bytecodelib-install:: $(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc
+install-bytecode-library:: $(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc
 
-$(LLVMGCCDIR)/bytecode-libs/lib$(LIBRARYNAME).bc: $(LIBNAME_BC)
+$(DESTDIR)$(bytecode_libdir)/lib$(LIBRARYNAME).bc: $(LIBNAME_BC) $(DESTDIR)$(bytecode_libdir)
 	@${ECHO} ======= Installing $(LIBRARYNAME) bytecode library =======
 	cp $< $@
 
 # Does the library want a .o version built?
 ifndef DONT_BUILD_RELINKED
-all:: $(DESTLIBCURRENT)/$(LIBRARYNAME).o
+all:: $(LIBNAME_OBJCUR)
+install:: install-single-object-library
 endif
 
 # Does the library want an archive version built?
 ifdef BUILD_ARCHIVE
-all:: $(DESTLIBCURRENT)/lib$(LIBRARYNAME).a
+all:: $(LIBNAME_ACUR)
+install:: install-archive-library
 endif
 
 #--------------------------------------------------------------------
@@ -525,6 +555,10 @@ $(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
 	$(VERB) $(LIBTOOL) --mode=install $(INSTALL) $*.la $(DESTLIBCURRENT)
 	@${ECHO} ======= Finished building $(LIBRARYNAME) dynamic debug library =======
 
+install-dynamic-library: $(LIBNAME_CUR)
+	$(MKDIR) $(DESTDIR)$(libdir)
+	$(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_CUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT)
+
 #
 # Rules for building static archive libraries.
 #
@@ -546,6 +580,9 @@ $(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
 	$(VERB) $(Link) -g $(STRIP) -o $@ $(ObjectsG) $(LibSubDirs) -static
 	@${ECHO} ======= Finished building $(LIBRARYNAME) archive debug library =======
 
+install-archive-library: $(LIBNAME_ACUR)
+	$(MKDIR) $(DESTDIR)$(libdir)
+	$(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_ACUR) $(DESTDIR)$(libdir)/lib$(LIBRARYNAME).a
 
 #
 # Rules for building .o libraries.
@@ -573,23 +610,10 @@ $(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(DESTLIBDEBUG)/.dir
 	@${ECHO} "Linking `basename $@`"
 	$(VERB) $(Relink) -o $@ $(RObjectsG) $(LibSubDirs)
 
-endif
+install-single-object-library: $(LIBNAME_OBJCUR)
+	$(MKDIR) $(DESTDIR)$(libdir)
+	$(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_OBJCUR) $(DESTDIR)$(libdir)/$(LIBRARYNAME).o
 
-#------------------------------------------------------------------------
-# Create a TAGS database for emacs
-#------------------------------------------------------------------------
-
-ifneq ($(ETAGS),false)
-ifeq ($(LEVEL), .)
-SRCDIRS := $(wildcard $(SourceDir)/include $(SourceDir)/lib $(SourceDir)/tools)
-
-tags:
-	$(ETAGS) -l c++ `find $(SRCDIRS) -name '*.cpp' -o -name '*.h'`
-all:: tags
-endif
-else
-tags:
-	${ECHO} "Cannot build $@: The program etags is not installed"
 endif
 
 #------------------------------------------------------------------------
@@ -669,6 +693,10 @@ $(TOOLEXENAME_P): $(ObjectsP) $(USED_LIB_PATHS_P) $(DESTTOOLPROFILE)/.dir
 	$(VERB) $(LinkP) -o $@ $(ObjectsP) $(LIB_OPTS_P) $(LINK_OPTS) $(LIBS)
 	@${ECHO} ======= Finished building $(TOOLNAME) profile executable =======
 
+install:: $(TOOLEXENAMES)
+	$(MKDIR) $(DESTDIR)$(bindir)
+	$(LIBTOOL) --mode=install $(INSTALL_PROGRAM) -c -m 0755 $(TOOLEXENAMES) $(DESTDIR)$(bindir)/$(TOOLNAME)
+
 endif
 
 
@@ -704,11 +732,11 @@ $(BUILD_OBJ_DIR)/Debug/%.lo: %.c $(BUILD_OBJ_DIR)/Debug/.dir
 
 $(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.cpp $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1XX)
 	@${ECHO} "Compiling `basename $<` to bytecode"
-	$(VERB) $(LLVMGXX) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
+	$(VERB) $(LLVMGXX) $(CompileCommonOpts) $(CPPFLAGS) -c $< -o $@
 
 $(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.c $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LCC1)
 	@${ECHO} "Compiling `basename $<` to bytecode"
-	$(VERB) $(LLVMGCC) $(CompileWarnings) $(CPPFLAGS) -c $< -o $@
+	$(VERB) $(LLVMGCC) $(CompileCommonOpts) $(CPPFLAGS) -c $< -o $@
 
 $(BUILD_OBJ_DIR)/BytecodeObj/%.bc: %.ll $(BUILD_OBJ_DIR)/BytecodeObj/.dir $(LLVMAS)
 	@${ECHO} "Compiling `basename $<` to bytecode"
@@ -781,7 +809,10 @@ clean::
 	$(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Debug $(BUILD_OBJ_DIR)/Release
 	$(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/Profile $(BUILD_OBJ_DIR)/Depend
 	$(VERB) $(RM) -rf $(BUILD_OBJ_DIR)/BytecodeObj
-	$(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *.so *~ *.flc
+	$(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc
+ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set
+	$(VERB)	$(RM) -f *$(SHLIBEXT)
+endif
 	$(VERB) $(RM) -f $(LEX_OUTPUT) $(YACC_OUTPUT)
 
 ###########################################################################
@@ -800,11 +831,11 @@ SourceDepend := $(SourceBaseNames:%=$(BUILD_OBJ_DIR)/Depend/%.d)
 
 # Create dependencies for the *.cpp files...
 $(BUILD_OBJ_DIR)/Depend/%.d: %.cpp $(BUILD_OBJ_DIR)/Depend/.dir
-	$(VERB) $(Depend) $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+	$(VERB) $(Depend) $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
 
 # Create dependencies for the *.c files...
 $(BUILD_OBJ_DIR)/Depend/%.d: %.c $(BUILD_OBJ_DIR)/Depend/.dir
-	$(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o|\.lo|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
+	$(VERB) $(DependC) -o $@ $< | $(SED) 's|\.o:|\.lo:|' | $(SED) 's|$*\.lo *|$(BUILD_OBJ_DIR)/Release/& $(BUILD_OBJ_DIR)/Profile/& $(BUILD_OBJ_DIR)/Debug/& $(BUILD_OBJ_DIR)/Depend/$(@F)|g' > $@
 
 #
 # Autoconf Dependencies.
@@ -816,6 +847,13 @@ $(LLVM_OBJ_ROOT)/config.status:: $(LLVM_SRC_ROOT)/configure
 	@${ECHO} "****************************************************************"
 	$(VERB) exit 1
 
+# If the Makefile in the source tree has been updated, copy it over into the
+# build tree.
+Makefile :: $(BUILD_SRC_DIR)/Makefile
+	@${ECHO} "===== Updating Makefile from source dir: `dirname $<` ====="
+	$(MKDIR) $(@D)
+	cp -f $< $@
+
 #
 # Include dependencies generated from C/C++ source files, but not if we
 # are cleaning (this example taken from the GNU Make Manual).