X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.rules;h=5fd539daaa7c6f07bfc0dd2d7481677463da483e;hb=efd02c750f19f1ada69f31a46bdefcfc52834e99;hp=7c91e25cd710148a8f3dc2353b25df2c054489b7;hpb=7f2cd27ff19f0a5643894804fe7315731f153ed2;p=oota-llvm.git diff --git a/Makefile.rules b/Makefile.rules index 7c91e25cd71..5fd539daaa7 100644 --- a/Makefile.rules +++ b/Makefile.rules @@ -12,54 +12,180 @@ # #===-----------------------------------------------------------------------==== -# -# Set the VPATH so that we can find source files. -# -VPATH=$(BUILD_SRC_DIR) - -############################################################################### +################################################################################ # TARGETS: Define standard targets that can be invoked -############################################################################### +################################################################################ #-------------------------------------------------------------------- # Define the various target sets #-------------------------------------------------------------------- -RECURSIVE_TARGETS := all clean check install uninstall -LOCAL_TARGETS := all-local clean-local check-local install-local printvars\ - uninstall-local -TOPLEV_TARGETS := dist dist-check dist-clean tags -USER_TARGETS := $(RECURSIVE_TARGETS) $(LOCAL_TARGETS) $(TOPLEV_TARGETS) -INTERNAL_TARGETS := preconditions \ - install-config-dir install-shared-library install-bytecode-library \ - install-archive-library install-relinked-library install-tool \ - uninstall-config-dir uninstall-shared-library uninstall-bytecode-library \ - uninstall-archive-library uninstall-relinked-library uninstall-tool +RecursiveTargets := all clean clean-all install uninstall install-bytecode +LocalTargets := all-local clean-local clean-all-local check-local \ + install-local printvars uninstall-local \ + install-bytecode-local +TopLevelTargets := check dist dist-check dist-clean tags dist-gzip dist-bzip2 \ + dist-zip +UserTargets := $(RecursiveTargets) $(LocalTargets) $(TopLevelTargets) +InternalTargets := preconditions distdir dist-hook + +################################################################################ +# INITIALIZATION: Basic things the makefile needs +################################################################################ + +#-------------------------------------------------------------------- +# Set the VPATH so that we can find source files. +#-------------------------------------------------------------------- +VPATH=$(PROJ_SRC_DIR) + +#-------------------------------------------------------------------- +# Reset the list of suffixes we know how to build +#-------------------------------------------------------------------- +.SUFFIXES: +.SUFFIXES: .c .cpp .cc .h .hpp .y .l .lo .o .a .bc .td .ps .dot +.SUFFIXES: $(SHLIBEXT) $(SUFFIXES) #-------------------------------------------------------------------- # Mark all of these targets as phony to avoid implicit rule search #-------------------------------------------------------------------- -.PHONY: $(USER_TARGETS) $(INTERNAL_TARGETS) +.PHONY: $(UserTargets) $(InternalTargets) #-------------------------------------------------------------------- -# Make sure all the user-target rules are double colon rules and that -# the preconditions are run first. +# Make sure all the user-target rules are double colon rules and +# they are defined first. #-------------------------------------------------------------------- -$(USER_TARGETS) :: preconditions +$(UserTargets):: -all :: all-local -check:: check-local -clean:: clean-local -install :: install-local -uninstall :: uninstall-local -check-local :: all-local -install-local :: all-local +################################################################################ +# PRECONDITIONS: that which must be built/checked first +################################################################################ -############################################################################### -# SUFFIXES: Reset the list of suffixes we know how to build -############################################################################### -.SUFFIXES: -.SUFFIXES: .c .cpp .h .hpp .y .l .lo .o .a $(SHLIBEXT) .bc .td .ps .dot $(SUFFIXES) +SrcMakefiles := $(filter %Makefile %Makefile.tests,\ + $(wildcard $(PROJ_SRC_DIR)/Makefile*)) +ObjMakefiles := $(subst $(PROJ_SRC_DIR),$(PROJ_OBJ_DIR),$(SrcMakefiles)) +ConfigureScript := $(PROJ_SRC_ROOT)/configure +ConfigStatusScript := $(PROJ_OBJ_ROOT)/config.status +MakefileConfigIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.config.in)) +MakefileCommonIn := $(strip $(wildcard $(PROJ_SRC_ROOT)/Makefile.common.in)) +MakefileConfig := $(PROJ_OBJ_ROOT)/Makefile.config +MakefileCommon := $(PROJ_OBJ_ROOT)/Makefile.common +PreConditions := $(ConfigStatusScript) $(ObjMakefiles) +ifneq ($(MakefileCommonIn),) +PreConditions += $(MakefileCommon) +endif +ifneq ($(MakefileConfigIn),) +PreConditions += $(MakefileConfig) +endif + +preconditions : $(PreConditions) + +#------------------------------------------------------------------------ +# Make sure the BUILT_SOURCES are built first +#------------------------------------------------------------------------ +$(filter-out clean clean-local,$(UserTargets)):: $(BUILT_SOURCES) + +clean-local:: +ifneq ($(strip $(BUILT_SOURCES)),) + -$(Verb) $(RM) -f $(BUILT_SOURCES) +endif + +ifneq ($(PROJ_OBJ_ROOT),$(PROJ_SRC_ROOT)) +spotless: + $(Verb) if test -x config.status ; then \ + $(EchoCmd) Wiping out $(PROJ_OBJ_ROOT) ; \ + $(MKDIR) .spotless.save ; \ + $(MV) config.status .spotless.save ; \ + $(MV) mklib .spotless.save ; \ + $(MV) projects .spotless.save ; \ + $(RM) -rf * ; \ + $(MV) .spotless.save/config.status . ; \ + $(MV) .spotless.save/mklib . ; \ + $(MV) .spotless.save/projects . ; \ + $(RM) -rf .spotless.save ; \ + $(EchoCmd) Rebuilding configuration of $(PROJ_OBJ_ROOT) ; \ + $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \ + $(ConfigStatusScript) ; \ + else \ + $(EchoCmd) "make spotless" can only be run from $(PROJ_OBJ_ROOT); \ + fi +endif + +$(BUILT_SOURCES) : $(ObjMakefiles) + +#------------------------------------------------------------------------ +# Make sure we're not using a stale configuration +#------------------------------------------------------------------------ +reconfigure: + $(Echo) Reconfiguring $(PROJ_OBJ_ROOT) + $(Verb) cd $(PROJ_OBJ_ROOT) && \ + if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \ + $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \ + fi ; \ + $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \ + $(ConfigStatusScript) + +.PRECIOUS: $(ConfigStatusScript) +$(ConfigStatusScript): $(ConfigureScript) + $(Echo) Reconfiguring with $< + $(Verb) cd $(PROJ_OBJ_ROOT) && \ + if test -w $(PROJ_OBJ_ROOT)/config.cache ; then \ + $(RM) $(PROJ_OBJ_ROOT)/config.cache ; \ + fi ; \ + $(ConfigStatusScript) --recheck $(ConfigureScriptFLAGS) && \ + $(ConfigStatusScript) + +#------------------------------------------------------------------------ +# Make sure the configuration makefile is up to date +#------------------------------------------------------------------------ +ifneq ($(MakefileConfigIn),) +$(MakefileConfig): $(MakefileConfigIn) $(ConfigStatusScript) + $(Echo) Regenerating $@ + $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.config +endif + +ifneq ($(MakefileCommonIn),) +$(MakefileCommon): $(MakefileCommonIn) $(ConfigStatusScript) + $(Echo) Regenerating $@ + $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ConfigStatusScript) Makefile.common +endif + +#------------------------------------------------------------------------ +# If the Makefile in the source tree has been updated, copy it over into the +# build tree. But, only do this if the source and object makefiles differ +#------------------------------------------------------------------------ +ifneq ($(PROJ_OBJ_DIR),$(PROJ_SRC_DIR)) + +Makefile: $(PROJ_SRC_DIR)/Makefile + $(Echo) "Updating Makefile" + $(Verb) $(MKDIR) $(@D) + $(Verb) $(CP) -f $< $@ + +# Copy the Makefile.* files unless we're in the root directory which avoids +# the copying of Makefile.config.in or other things that should be explicitly +# taken care of. +$(PROJ_OBJ_DIR)/Makefile% : $(PROJ_SRC_DIR)/Makefile% + @case '$?' in \ + *Makefile.rules) ;; \ + *.in) ;; \ + *) $(Echo) "Updating $(@F)" ; \ + $(MKDIR) $(@D) ; \ + $(CP) -f $< $@ ;; \ + esac + +endif + +#------------------------------------------------------------------------ +# Set up the basic dependencies +#------------------------------------------------------------------------ +$(UserTargets):: $(PreConditions) + +all:: all-local +clean:: clean-local +clean-all:: clean-local clean-all-local +install:: install-local +uninstall:: uninstall-local +install-local:: all-local +install-bytecode:: install-bytecode-local ############################################################################### # VARIABLES: Set up various variables based on configuration data @@ -69,90 +195,146 @@ install-local :: all-local # Variables derived from configuration we are building #-------------------------------------------------------------------- + ifdef ENABLE_PROFILING - CONFIGURATION := Profile - CXXFLAGS += -O3 -DNDEBUG -felide-constructors -finline-functions -pg - CFLAGS += -O3 -DNDEBUG -pg - LDFLAGS += -O3 -DNDEBUG -pg + BuildMode := Profile + CXX.Flags := -O3 -DNDEBUG -felide-constructors -finline-functions -pg + C.Flags := -O3 -DNDEBUG -pg + LD.Flags := -O3 -DNDEBUG -pg else ifdef ENABLE_OPTIMIZED - CONFIGURATION := Release - CXXFLAGS += -O3 -DNDEBUG -finline-functions -felide-constructors -fomit-frame-pointer - CFLAGS += -O3 -DNDEBUG -fomit-frame-pointer - LDFLAGS += -O3 -DNDEBUG + BuildMode := Release + # Don't use -fomit-frame-pointer on FreeBSD + ifneq ($(OS),FreeBSD) + OmitFramePointer := -fomit-frame-pointer + endif + CXX.Flags := -O3 -DNDEBUG -finline-functions -felide-constructors \ + $(OmitFramePointer) + C.Flags := -O3 -DNDEBUG $(OmitFramePointer) + LD.Flags := -O3 -DNDEBUG else - CONFIGURATION := Debug - CXXFLAGS += -g -D_DEBUG - CFLAGS += -g -D_DEBUG - LDFLAGS += -g -D_DEBUG + BuildMode := Debug + CXX.Flags := -g -D_DEBUG + C.Flags := -g -D_DEBUG + LD.Flags := -g -D_DEBUG KEEP_SYMBOLS := 1 endif endif -ARFLAGS := cru +CXX.Flags += $(CXXFLAGS) +C.Flags += $(CFLAGS) +CPP.Flags += $(CPPFLAGS) +LD.Flags += $(LDFLAGS) +AR.Flags := cru +LibTool.Flags := --tag=CXX + +#Make Floating point ieee complient on alpha +ifeq ($(ARCH),Alpha) + CXX.Flags += -mieee + CPP.Flags += -mieee +endif #-------------------------------------------------------------------- # Directory locations #-------------------------------------------------------------------- -OBJDIR := $(BUILD_OBJ_DIR)/$(CONFIGURATION) -LIBDIR := $(BUILD_OBJ_ROOT)/lib/$(CONFIGURATION) -TOOLDIR := $(BUILD_OBJ_ROOT)/tools/$(CONFIGURATION) -LLVMLIBDIR := $(LLVM_OBJ_ROOT)/lib/$(CONFIGURATION) -LLVMTOOLDIR := $(LLVM_OBJ_ROOT)/tools/$(CONFIGURATION) +ObjDir := $(PROJ_OBJ_DIR)/$(BuildMode) +LibDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/lib +ToolDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/bin +ExmplDir := $(PROJ_OBJ_ROOT)/$(BuildMode)/examples +LLVMLibDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/lib +LLVMToolDir := $(LLVM_OBJ_ROOT)/$(BuildMode)/bin +LLVMExmplDir:= $(LLVM_OBJ_ROOT)/$(BuildMode)/examples +CFERuntimeLibDir := $(LLVMGCCDIR)/lib #-------------------------------------------------------------------- # Full Paths To Compiled Tools and Utilities #-------------------------------------------------------------------- +EchoCmd = $(ECHO) llvm[$(MAKELEVEL)]: +Echo = @$(EchoCmd) +ifndef LIBTOOL LIBTOOL := $(LLVM_OBJ_ROOT)/mklib -LLVMAS := $(LLVMTOOLDIR)/llvm-as$(EXEEXT) -BURG := $(LLVMTOOLDIR)/burg$(EXEEXT) -TBLGEN := $(LLVMTOOLDIR)/tblgen$(EXEEXT) -GCCLD := $(LLVMTOOLDIR)/gccld$(EXEEXT) -LLVMGCC := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/gcc -LLVMGXX := PATH=$(LLVMTOOLDIR):$(PATH) $(LLVMGCCDIR)/bin/g++ +endif +ifndef LLVMAS +LLVMAS := $(LLVMToolDir)/llvm-as$(EXEEXT) +endif +ifndef BURG +BURG := $(LLVMToolDir)/burg$(EXEEXT) +endif +ifndef TBLGEN +TBLGEN := $(LLVMToolDir)/tblgen$(EXEEXT) +endif +ifndef GCCAS +GCCAS := $(LLVMToolDir)/gccas$(EXEEXT) +endif +ifndef GCCLD +GCCLD := $(LLVMToolDir)/gccld$(EXEEXT) +endif +ifndef LDIS +LLVMDIS := $(LLVMToolDir)/llvm-dis$(EXEEXT) +endif +ifndef LLI +LLI := $(LLVMToolDir)/lli$(EXEEXT) +endif +ifndef LLC +LLC := $(LLVMToolDir)/llc$(EXEEXT) +endif +ifndef LOPT +LOPT := $(LLVMToolDir)/opt$(EXEEXT) +endif +ifndef LBUGPOINT +LBUGPOINT := $(LLVMToolDir)/bugpoint$(EXEEXT) +endif -# Need a better way to compute this. -LLVMGCCLIBDIR := $(dir $(shell $(LLVMGCC) -print-file-name=libgcc.a))/ +LLVMGCCWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGCC) +LLVMGXXWITHPATH := PATH="$(LLVMToolDir):$(PATH)" $(LLVMGXX) #-------------------------------------------------------------------- # Adjust to user's request #-------------------------------------------------------------------- -# Adjust LIBTOOL options for shared libraries, or not. -ifndef SHARED_LIBRARY - LIBTOOL += --tag=disable-shared +# Adjust LD.Flags and Libtool.Flags depending on the kind of library that is +# to be built. Note that if LOADABLE_MODULE is specified then the resulting +# shared library can be opened with dlopen +ifdef SHARED_LIBRARY + LD.Flags += -rpath $(LibDir) + ifdef LOADABLE_MODULE + LD.Flags += -module + endif else - LDFLAGS += -rpath $(LIBDIR) + LibTool.Flags += --tag=disable-shared +endif + +ifdef TOOL_VERBOSE + C.Flags += -v + CXX.Flags += -v + LD.Flags += -v + VERBOSE := 1 endif # Adjust settings for verbose mode ifndef VERBOSE - VERB := @ - LIBTOOL += --silent - AR += >/dev/null 2>/dev/null - CONFIGUREFLAGS += >$(BUILD_OBJ_DIR)/configure.out 2>&1 + Verb := @ + LibTool.Flags += --silent + AR.Flags += >/dev/null 2>/dev/null + ConfigureScriptFLAGS += >$(PROJ_OBJ_DIR)/configure.out 2>&1 else - CONFIGUREFLAGS := + ConfigureScriptFLAGS := endif # By default, strip symbol information from executable ifndef KEEP_SYMBOLS - STRIP = $(PLATFORMSTRIPOPTS) - STRIP_WARN_MSG = "(without symbols)" + Strip := $(PLATFORMSTRIPOPTS) + StripWarnMsg := "(without symbols)" + Install.StripFlag += -s endif # Adjust linker flags for building an executable ifdef TOOLNAME - LDFLAGS += -rpath $(TOOLDIR) -export-dynamic $(TOOLLINKOPTS) +ifdef EXAMPLE_TOOL + LD.Flags += -rpath $(ExmplDir) -export-dynamic +else + LD.Flags += -rpath $(ToolDir) -export-dynamic endif - -# Use TOOLLINKOPTSB to pass options to the linker like library search -# path etc. -# Note that this is different from TOOLLINKOPTS, these options -# are passed to the linker *before* the USEDLIBS options are passed. -# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib -ifdef TOOLLINKOPTSB -LDFLAGS += $(TOOLLINKOPTSB) endif #---------------------------------------------------------- @@ -161,28 +343,34 @@ endif CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused -LDFLAGS += -L$(LIBDIR) -L$(LLVMLIBDIR) -CPPFLAGS += -I$(BUILD_OBJ_DIR) \ - -I$(BUILD_SRC_DIR) \ - -I$(BUILD_SRC_ROOT)/include \ - -I$(BUILD_OBJ_ROOT)/include \ - -I$(LLVM_OBJ_ROOT)/include \ - -I$(LLVM_SRC_ROOT)/include \ - -D_GNU_SOURCE -D__STDC_LIMIT_MACROS - -Compile.C = $(CC) $(CPPFLAGS) $(CompileCommonOpts) -c $(CFLAGS) -Compile.CXX = $(CXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c -LTCompile.C = $(LIBTOOL) --mode=compile $(Compile.C) -LTCompile.CXX = $(LIBTOOL) --tag=CXX --mode=compile $(Compile.CXX) -BCCompile.CXX = $(LLVMGXX) $(CPPFLAGS) $(CompileCommonOpts) $(CXXFLAGS) -c -BCCompile.C = $(LLVMGCC) $(CPPFLAGS) $(CompileCommonOpts) $(CFLAGS) -c -Link = $(LIBTOOL) --tag=CXX --mode=link $(CXX) $(CPPFLAGS) \ - $(CompileCommonOpts) $(LDFLAGS) $(STRIP) -Relink = $(LIBTOOL) --tag=CXX --mode=link $(CXX) -BCLinkLib = $(LLVMGCC) -shared -nostdlib -Burg = $(BURG) -I $(BUILD_SRC_DIR) -TableGen = $(TBLGEN) -I $(BUILD_SRC_DIR) -Archive = $(AR) $(ARFLAGS) +LD.Flags += -L$(LibDir) -L$(LLVMLibDir) +CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \ + -I$(PROJ_OBJ_ROOT)/include \ + -I$(PROJ_SRC_ROOT)/include \ + -I$(LLVM_OBJ_ROOT)/include \ + -I$(LLVM_SRC_ROOT)/include \ + -D_GNU_SOURCE -D__STDC_LIMIT_MACROS + +Compile.C = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags) +LTCompile.C = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C) +BCCompile.C = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \ + $(C.Flags) -c +Compile.CXX = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c +LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX) +BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \ + $(CXX.Flags) -c +Link = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \ + $(CompileCommonOpts) $(LD.Flags) $(Strip) +Relink = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \ + $(CompileCommonOpts) +LTInstall = $(LIBTOOL) $(LibTool.Flags) --mode=install $(INSTALL) \ + $(Install.Flags) +ProgInstall = $(INSTALL) $(Install.StripFlag) -m 0755 +DataInstall = $(INSTALL) -m 0644 +Burg = $(BURG) -I $(PROJ_SRC_DIR) +TableGen = $(TBLGEN) -I $(PROJ_SRC_DIR) +Archive = $(AR) $(AR.Flags) +LArchive = $(LLVMToolDir)/llvm-ar rcsf ifdef RANLIB Ranlib = $(RANLIB) else @@ -190,45 +378,83 @@ Ranlib = ranlib endif #---------------------------------------------------------- -# Get the list of source files +# Get the list of source files and compute object file +# names from them. #---------------------------------------------------------- -ifndef SOURCES -SOURCES := $(notdir $(wildcard $(BUILD_SRC_DIR)/*.cpp \ - $(BUILD_SRC_DIR)/*.cc $(BUILD_SRC_DIR)/*.c $(BUILD_SRC_DIR)/*.y \ - $(BUILD_SRC_DIR)/*.l)) -endif - -ifdef BUILT_SOURCES -SOURCES += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) -endif +ifdef FAKE_SOURCES + Sources := + FakeSources := $(FAKE_SOURCES) + ifdef BUILT_SOURCES + FakeSources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) + endif + BaseNameSources := $(sort $(basename $(FakeSources))) + ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o) + ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo) + ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc) +else + ifndef SOURCES + Sources := $(notdir $(wildcard $(PROJ_SRC_DIR)/*.cpp \ + $(PROJ_SRC_DIR)/*.cc $(PROJ_SRC_DIR)/*.c $(PROJ_SRC_DIR)/*.y \ + $(PROJ_SRC_DIR)/*.l)) + else + Sources := $(SOURCES) + endif -#---------------------------------------------------------- -# Types of objects that can be built from sources -#---------------------------------------------------------- -BASENAME_SOURCES := $(sort $(basename $(SOURCES))) -ObjectsO := $(BASENAME_SOURCES:%=$(OBJDIR)/%.o) -ObjectsLO := $(BASENAME_SOURCES:%=$(OBJDIR)/%.lo) -ObjectsBC := $(BASENAME_SOURCES:%=$(OBJDIR)/%.bc) + ifdef BUILT_SOURCES + Sources += $(filter %.cpp %.c %.cc %.y %.l,$(BUILT_SOURCES)) + endif + BaseNameSources := $(sort $(basename $(Sources))) + ObjectsO := $(BaseNameSources:%=$(ObjDir)/%.o) + ObjectsLO := $(BaseNameSources:%=$(ObjDir)/%.lo) + ObjectsBC := $(BaseNameSources:%=$(ObjDir)/%.bc) +endif ############################################################################### # DIRECTORIES: Handle recursive descent of directory structure ############################################################################### +#--------------------------------------------------------- +# Provide rules to make install dirs. This must be early +# in the file so they get built before dependencies +#--------------------------------------------------------- + +$(PROJ_bindir): + $(Verb) $(MKDIR) $(PROJ_bindir) + +$(PROJ_libdir): + $(Verb) $(MKDIR) $(PROJ_libdir) + +$(PROJ_includedir): + $(Verb) $(MKDIR) $(PROJ_includedir) + +$(PROJ_etcdir): + $(Verb) $(MKDIR) $(PROJ_etcdir) + +# To create other directories, as needed, and timestamp their creation +%/.dir: + $(Verb) $(MKDIR) $* > /dev/null + $(Verb) $(DATE) > $@ + +.PRECIOUS: $(ObjDir)/.dir $(LibDir)/.dir $(ToolDir)/.dir $(ExmplDir)/.dir +.PRECIOUS: $(LLVMLibDir)/.dir $(LLVMToolDir)/.dir $(LLVMExmplDir)/.dir + #--------------------------------------------------------- # Handle the DIRS options for sequential construction #--------------------------------------------------------- -SUBDIRS := +SubDirs := ifdef DIRS -SUBDIRS += $(DIRS) -$(RECURSIVE_TARGETS):: - $(VERB) for dir in $(DIRS); do \ +SubDirs += $(DIRS) +$(RecursiveTargets):: + $(Verb) for dir in $(DIRS); do \ if [ ! -f $$dir/Makefile ]; then \ $(MKDIR) $$dir; \ - cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ + $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ fi; \ - ($(MAKE) -C $$dir $@ ) || exit 1; \ + if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ + ($(MAKE) -C $$dir $@ ) || exit 1; \ + fi ; \ done endif @@ -237,13 +463,15 @@ endif # after each directory is built. #--------------------------------------------------------- ifdef EXPERIMENTAL_DIRS -$(RECURSIVE_TARGETS):: - $(VERB) for dir in $(EXPERIMENTAL_DIRS); do \ +$(RecursiveTargets):: + $(Verb) for dir in $(EXPERIMENTAL_DIRS); do \ if [ ! -f $$dir/Makefile ]; then \ $(MKDIR) $$dir; \ - cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ + $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ fi; \ - ($(MAKE) -C $$dir $@ ) || exit 0; \ + if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ + ($(MAKE) -C $$dir $@ ) || exit 0; \ + fi ; \ done endif @@ -252,23 +480,26 @@ endif #--------------------------------------------------------- ifdef PARALLEL_DIRS -SUBDIRS += $(PARALLEL_DIRS) -# Unfortunately, this list must be maintained if new -# recursive targets are added. -all :: $(addsuffix /.makeall , $(PARALLEL_DIRS)) -clean :: $(addsuffix /.makeclean , $(PARALLEL_DIRS)) -check :: $(addsuffix /.makecheck , $(PARALLEL_DIRS)) -install :: $(addsuffix /.makeinstall , $(PARALLEL_DIRS)) +SubDirs += $(PARALLEL_DIRS) + +# Unfortunately, this list must be maintained if new recursive targets are added +all :: $(addsuffix /.makeall ,$(PARALLEL_DIRS)) +clean :: $(addsuffix /.makeclean ,$(PARALLEL_DIRS)) +clean-all:: $(addsuffix /.makeclean-all,$(PARALLEL_DIRS)) +install :: $(addsuffix /.makeinstall ,$(PARALLEL_DIRS)) uninstall:: $(addsuffix /.makeuninstall,$(PARALLEL_DIRS)) +install-bytecode :: $(addsuffix /.makeinstall-bytecode,$(PARALLEL_DIRS)) -Parallel_Targets := $(foreach T,$(RECURSIVE_TARGETS),%/.make$(T)) +ParallelTargets := $(foreach T,$(RecursiveTargets),%/.make$(T)) -$(Parallel_Targets) : - $(VERB) if [ ! -f $(@D)/Makefile ]; then \ +$(ParallelTargets) : + $(Verb) if [ ! -f $(@D)/Makefile ]; then \ $(MKDIR) $(@D); \ - cp $(BUILD_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \ + $(CP) $(PROJ_SRC_DIR)/$(@D)/Makefile $(@D)/Makefile; \ fi; \ - $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) + if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ + $(MAKE) -C $(@D) $(subst $(@D)/.make,,$@) ; \ + fi endif #--------------------------------------------------------- @@ -277,16 +508,18 @@ endif #--------------------------------------------------------- ifdef OPTIONAL_DIRS -SUBDIRS += $(OPTIONAL_DIRS) +SubDirs += $(OPTIONAL_DIRS) -$(RECURSIVE_TARGETS):: - $(VERB) for dir in $(OPTIONAL_DIRS); do \ - if [ -d $(BUILD_SRC_DIR)/$$dir ]; then\ +$(RecursiveTargets):: + $(Verb) for dir in $(OPTIONAL_DIRS); do \ + if [ -d $(PROJ_SRC_DIR)/$$dir ]; then\ if [ ! -f $$dir/Makefile ]; then \ $(MKDIR) $$dir; \ - cp $(BUILD_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ + $(CP) $(PROJ_SRC_DIR)/$$dir/Makefile $$dir/Makefile; \ fi; \ - ($(MAKE) -C$$dir $@ ) || exit 1; \ + if [ ! -f $$dir/LLVM_DO_NOT_BUILD ]; then \ + ($(MAKE) -C$$dir $@ ) || exit 1; \ + fi ; \ fi \ done endif @@ -296,41 +529,96 @@ endif #--------------------------------------------------------- ifdef CONFIG_FILES -install-local:: install-config-dir - -install-config-dir: $(sysconfdir) $(CONFIG_FILES) - $(VERB)$(ECHO) Installing Configuration Files To $(sysconfdir) - $(VERB)for file in $(CONFIG_FILES); do \ - $(INSTALL) $(BUILD_SRC_DIR)/$${file} $(sysconfdir) ; \ +install-local:: $(PROJ_etcdir) $(CONFIG_FILES) + $(Echo) Installing Configuration Files To $(PROJ_etcdir) + $(Verb)for file in $(CONFIG_FILES); do \ + if test -f $(PROJ_OBJ_DIR)/$${file} ; then \ + $(DataInstall) $(PROJ_OBJ_DIR)/$${file} $(PROJ_etcdir) ; \ + elif test -f $(PROJ_SRC_DIR)/$${file} ; then \ + $(DataInstall) $(PROJ_SRC_DIR)/$${file} $(PROJ_etcdir) ; \ + else \ + $(ECHO) Error: cannot find config file $${file}. ; \ + fi \ done -uninstall-local:: uninstall-config-dir - -uninstall-config-dir: - $(VERB)$(ECHO) Uninstalling Configuration Files From $(sysconfdir) - $(VERB)for file in $(CONFIG_FILES); do \ - $(RM) -f $(sysconfdir)/$${file} ; \ +uninstall-local:: + $(Echo) Uninstalling Configuration Files From $(PROJ_etcdir) + $(Verb)for file in $(CONFIG_FILES); do \ + $(RM) -f $(PROJ_etcdir)/$${file} ; \ done -$(sysconfdir): - $(MKDIR) $(sysconfdir) - endif ############################################################################### # Library Build Rules: Four ways to build a library ############################################################################### +#--------------------------------------------------------- +# Bytecode Module Targets: +# If the user set MODULE_NAME then they want to build a +# bytecode module from the sources. We compile all the +# sources and link it together into a single bytecode +# module. +#--------------------------------------------------------- + +ifdef MODULE_NAME +ifeq ($(strip $(LLVMGCC)),) +$(warning Modules require llvm-gcc but no llvm-gcc is available) +else + +Module := $(LibDir)/$(MODULE_NAME).bc +LinkModule := $(LLVMGCCWITHPATH) -shared -nostdlib + +ifdef EXPORTED_SYMBOL_FILE +LinkModule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) +endif + +$(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD) + $(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@) + $(Verb) $(LinkModule) -o $@ $(ObjectsBC) + +all-local:: $(Module) + +clean-local:: +ifneq ($(strip $(Module)),) + -$(Verb) $(RM) -f $(Module) +endif + +ifdef BYTECODE_DESTINATION +ModuleDestDir := $(BYTECODE_DESTINATION) +else +ModuleDestDir := $(PROJ_libdir) +endif + +DestModule := $(ModuleDestDir)/$(MODULE_NAME).bc + +install-module:: $(DestModule) +install-local:: $(DestModule) + +$(DestModule): $(ModuleDestDir) $(Module) + $(Echo) Installing $(BuildMode) Bytecode Module $(DestModule) + $(Verb) $(DataInstall) $(Module) $(DestModule) + +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule) + -$(Verb) $(RM) -f $(DestModule) + +endif +endif # if we're building a library ... ifdef LIBRARYNAME # Make sure there isn't any extranous whitespace on the LIBRARYNAME option LIBRARYNAME := $(strip $(LIBRARYNAME)) -LIBNAME_LA := $(LIBDIR)/lib$(LIBRARYNAME).la -LIBNAME_A := $(LIBDIR)/lib$(LIBRARYNAME).a -LIBNAME_O := $(LIBDIR)/$(LIBRARYNAME).o -LIBNAME_BC := $(LIBDIR)/lib$(LIBRARYNAME).bc +ifdef LOADABLE_MODULE +LibName.LA := $(LibDir)/$(LIBRARYNAME).la +else +LibName.LA := $(LibDir)/lib$(LIBRARYNAME).la +endif +LibName.A := $(LibDir)/lib$(LIBRARYNAME).a +LibName.O := $(LibDir)/$(LIBRARYNAME).o +LibName.BCA:= $(LibDir)/lib$(LIBRARYNAME).bca #--------------------------------------------------------- # Shared Library Targets: @@ -340,34 +628,30 @@ LIBNAME_BC := $(LIBDIR)/lib$(LIBRARYNAME).bc #--------------------------------------------------------- ifdef SHARED_LIBRARY -all-local:: $(LIBNAME_LA) +all-local:: $(LibName.LA) -$(LIBNAME_LA): $(BUILT_SOURCES) $(ObjectsLO) $(LIBDIR)/.dir - @$(ECHO) Linking shared library $(notdir $@) - $(VERB) $(Link) -o $@ $(ObjectsLO) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $@ $(LIBDIR) +$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir + $(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT) + $(Verb) $(Link) -o $@ $(ObjectsLO) + $(Verb) $(LTInstall) $@ $(LibDir) clean-local:: -ifneq ($(strip $(LIBNAME_LA)),) - $(VERB) $(RM) -f $(LIBNAME_LA) +ifneq ($(strip $(LibName.LA)),) + -$(Verb) $(RM) -f $(LibName.LA) endif -DestSharedLib = $(libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) -install-local:: install-shared-library - -install-shared-library: $(DestSharedLib) +DestSharedLib = $(PROJ_libdir)/lib$(LIBRARYNAME)$(SHLIBEXT) -$(DestSharedLib): $(LIBNAME_LA) - @$(ECHO) Installing shared library $(DestSharedLib) - $(VERB) $(MKDIR) $(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_LA) $(DestSharedLib) - $(VERB) $(LIBTOOL) --finish $(libdir) +install-local:: $(DestSharedLib) -uninstall-local:: uninstall-shared-library +$(DestSharedLib): $(PROJ_libdir) $(LibName.LA) + $(Echo) Installing $(BuildMode) Shared Library $(DestSharedLib) + $(Verb) $(LTInstall) $(LibName.LA) $(DestSharedLib) + $(Verb) $(LIBTOOL) --finish $(PROJ_libdir) -uninstall-shared-library: - @$(ECHO) Uninstalling shared library $(DestSharedLib) - $(VERB) $(RM) -f $(DestSharedLib) +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) Shared Library $(DestSharedLib) + -$(Verb) $(RM) -f $(PROJ_libdir)/lib$(LIBRARYNAME).* endif @@ -378,108 +662,128 @@ endif # targets for building them. #--------------------------------------------------------- ifdef BYTECODE_LIBRARY - -ifdef EXPORTED_SYMBOL_LIST - BCLinkLib += -Xlinker -internalize-public-api-list=$(EXPORTED_SYMBOL_LIST) +ifeq ($(strip $(LLVMGCC)),) +$(warning Bytecode libraries require llvm-gcc which could not be found) else - ifdef EXPORTED_SYMBOL_FILE - BCLinkLib += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) - else - BCLinkLib += -Xlinker -disable-internalize - endif -endif -all-local:: $(LIBNAME_BC) +# make the C and C++ compilers strip debug info out of bytecode libraries. +BCCompile.C += -Wa,-strip-debug +BCCompile.CXX += -Wa,-strip-debug -$(LIBNAME_BC): $(BUILT_SOURCES) $(ObjectsBC) $(LIBDIR)/.dir - @$(ECHO) Linking bytecode library $(notdir $@) - $(VERB) $(BCLinkLib) -o $@ $(ObjectsBC) +all-local:: $(LibName.BCA) + +ifdef EXPORTED_SYMBOL_FILE +BCLinkLib = $(LLVMGCCWITHPATH) -shared -nostdlib -Xlinker \ + -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE) + +$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir $(GCCLD) \ + $(LLVMToolDir)/llvm-ar + $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) \ + "(internalize)" + $(Verb) $(BCLinkLib) -o $(ObjDir)/$(LIBRARYNAME).o $(ObjectsBC) + $(Verb) $(RM) -f $@ + $(Verb) $(LArchive) $@ $(ObjDir)/$(LIBRARYNAME).o +else +$(LibName.BCA): $(ObjectsBC) $(LibDir)/.dir \ + $(LLVMToolDir)/llvm-ar + $(Echo) Building $(BuildMode) Bytecode Archive $(notdir $@) + $(Verb) $(RM) -f $@ + $(Verb) $(LArchive) $@ $(ObjectsBC) + +endif clean-local:: -ifneq ($(strip $(LIBNAME_BC)),) - $(VERB) $(RM) -f $(LIBNAME_BC) +ifneq ($(strip $(LibName.BCA)),) + -$(Verb) $(RM) -f $(LibName.BCA) endif -DestBytecodeLib = $(bytecode_libdir)/lib$(LIBRARYNAME).bc -install-local:: install-bytecode-library +ifdef BYTECODE_DESTINATION +BytecodeDestDir := $(BYTECODE_DESTINATION) +else +BytecodeDestDir := $(PROJ_libdir) +endif -install-bytecode-library: $(DestBytecodeLib) +DestBytecodeLib = $(BytecodeDestDir)/lib$(LIBRARYNAME).a -$(DestBytecodeLib): $(LIBNAME_BC) $(bytecode_libdir) - @$(ECHO) Installing bytecode library $(DestBytecodeLib) - $(VERB) $(INSTALL) $< $@ +install-bytecode-local:: $(DestBytecodeLib) -uninstall-local:: uninstall-bytecode-library +install-local:: $(DestBytecodeLib) -uninstall-bytecode-library: - @$(ECHO) Uninstalling bytecode library $(DestBytecodeLib) - $(VERB) $(RM) -f $(DestBytecodeLib) +$(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA) + $(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib) + $(Verb) $(DataInstall) $(LibName.BCA) $(DestBytecodeLib) +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib) + -$(Verb) $(RM) -f $(DestBytecodeLib) + +endif endif -# Does the library want a .o version built? +#--------------------------------------------------------- +# ReLinked Library Targets: +# If the user didn't explicitly forbid building a +# relinked then we provide targets for building them. +#--------------------------------------------------------- ifndef DONT_BUILD_RELINKED -all-local:: $(LIBNAME_O) -$(LIBNAME_O): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir - @$(ECHO) Linking object library $(notdir $@) - $(VERB) $(Relink) -o $@ $(ObjectsO) +all-local:: $(LibName.O) + +$(LibName.O): $(ObjectsO) $(LibDir)/.dir + $(Echo) Linking $(BuildMode) Object Library $(notdir $@) + $(Verb) $(Relink) -o $@ $(ObjectsO) clean-local:: -ifneq ($(strip $(LIBNAME_O)),) - $(VERB) $(RM) -f $(LIBNAME_O) +ifneq ($(strip $(LibName.O)),) + -$(Verb) $(RM) -f $(LibName.O) endif -DestRelinkedLib = $(libdir)/$(LIBRARYNAME).o - -install-local:: install-relinked-library - -install-relinked-library: $(DestRelinkedLib) +DestRelinkedLib = $(PROJ_libdir)/$(LIBRARYNAME).o -$(DestRelinkedLib): $(LIBNAME_O) - @$(ECHO) Installing object library $(DestRelinkedLib) - $(VERB) $(MKDIR) $(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_O) $(DestRelinkedLib) +install-local:: $(DestRelinkedLib) -uninstall-local:: uninstall-relinked-library +$(DestRelinkedLib): $(PROJ_libdir) $(LibName.O) + $(Echo) Installing $(BuildMode) Object Library $(DestRelinkedLib) + $(Verb) $(LTInstall) $(LibName.O) $(DestRelinkedLib) -uninstall-relinked-library: - @$(ECHO) Uninstalling object library $(DestRelinkedLib) - $(VERB) $(RM) -f $(DestRelinkedLib) +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) Object Library $(DestRelinkedLib) + -$(Verb) $(RM) -f $(DestRelinkedLib) endif -# Does the library want an archive version built? +#--------------------------------------------------------- +# Archive Library Targets: +# If the user wanted a regular archive library built, +# then we provide targets for building them. +#--------------------------------------------------------- ifdef BUILD_ARCHIVE -all-local:: $(LIBNAME_A) -$(LIBNAME_A): $(BUILT_SOURCES) $(ObjectsO) $(LIBDIR)/.dir - @$(ECHO) Building archive library $(notdir $@) - $(VERB)$(RM) -f $@ - $(VERB) $(Archive) $@ $(ObjectsO) - $(VERB) $(Ranlib) $@ +all-local:: $(LibName.A) + +$(LibName.A): $(ObjectsO) $(LibDir)/.dir + $(Echo) Building $(BuildMode) Archive Library $(notdir $@) + -$(Verb) $(RM) -f $@ + $(Verb) $(Archive) $@ $(ObjectsO) + $(Verb) $(Ranlib) $@ clean-local:: -ifneq ($(strip $(LIBNAME_A)),) - $(VERB) $(RM) -f $(LIBNAME_A) +ifneq ($(strip $(LibName.A)),) + -$(Verb) $(RM) -f $(LibName.A) endif -DestArchiveLib := $(libdir)/lib$(LIBRARYNAME).a +DestArchiveLib := $(PROJ_libdir)/lib$(LIBRARYNAME).a -install-local:: install-archive-library +install-local:: $(DestArchiveLib) -install-archive-library: $(DestArchiveLib) +$(DestArchiveLib): $(PROJ_libdir) $(LibName.A) + $(Echo) Installing $(BuildMode) Archive Library $(DestArchiveLib) + $(Verb) $(MKDIR) $(PROJ_libdir) + $(Verb) $(LTInstall) $(LibName.A) $(DestArchiveLib) -$(DestArchiveLib): $(LIBNAME_A) - @$(ECHO) Installing archive library $(DestArchiveLib) - $(VERB) $(MKDIR) $(libdir) - $(VERB) $(LIBTOOL) --mode=install $(INSTALL) $(LIBNAME_A) $(DestArchiveLib) - -uninstall-local:: uninstall-archive-library - -uninstall-archive-library: - @$(ECHO) Uninstalling archive library $(DestArchiveLib) - $(VERB) $(RM) -f $(DestArchiveLib) +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) Archive Library $(DestArchiveLib) + -$(Verb) $(RM) -f $(DestArchiveLib) endif @@ -493,257 +797,388 @@ endif ifdef TOOLNAME #--------------------------------------------------------- -# TOOLLINKOPTSB to pass options to the linker like library search path etc -# Note that this is different from TOOLLINKOPTS, these options -# are passed to the linker *before* the USEDLIBS options are passed. -# e.g. usage TOOLLINKOPTSB = -L/home/xxx/lib +# Handle the special "JIT" value for LLVM_LIBS which is a +# shorthand for a bunch of libraries that get the correct +# JIT support for a tool that runs JIT. #--------------------------------------------------------- -ifdef TOOLLINKOPTSB -Link += $(TOOLLINKOPTSB) +ifeq ($(LLVMLIBS),JIT) + +# Make sure we can get our own symbols in the tool +Link += -dlopen self + +# Generic JIT libraries +JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine + +# You can enable the X86 JIT on a non-X86 host by setting the flag +# ENABLE_X86_JIT on the make command line. If not, it will still be +# enabled automagically on an X86 host. +ifeq ($(ARCH), x86) + ENABLE_X86_JIT = 1 endif -# TOOLEXENAME - This is the output filenames to generate -TOOLEXENAME := $(TOOLDIR)/$(TOOLNAME) +# What the X86 JIT requires +ifdef ENABLE_X86_JIT + JIT_LIBS += LLVMX86 LLVMSelectionDAG +endif -# LIBS_OPTIONS - Compute the options lines that add -llib1 -llib2, etc. -PROJ_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) -PROJ_LIBS_OPTIONS := $(patsubst %.o, $(LIBDIR)/%.o, $(PROJ_LIBS_OPTIONS)) -LLVM_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) -LLVM_LIBS_OPTIONS := $(patsubst %.o, $(LLVMLIBDIR)/%.o, $(LLVM_LIBS_OPTIONS)) +# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag +# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be +# enabled automagically on an SparcV9 host. +ifeq ($(ARCH), Sparc) + ENABLE_SPARCV9_JIT = 1 +endif + +# What the Sparc JIT requires +ifdef ENABLE_SPARCV9_JIT + JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \ + LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \ + LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \ + LLVMDataStructure.a LLVMSparcV9RegAlloc +endif -# USED_LIBS/LIBS_PATHS - Compute dependent library file paths -PROJ_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) -LLVM_USED_LIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS))) -PROJ_LIBS_PATHS := $(addprefix $(LIBDIR)/,$(PROJ_USED_LIBS)) -LLVM_LIBS_PATHS := $(addprefix $(LLVMLIBDIR)/,$(LLVM_USED_LIBS)) +# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag +# ENABLE_PPC_JIT on the make command line. If not, it will still be +# enabled automagically on an PowerPC host. +ifeq ($(ARCH), PowerPC) + ENABLE_PPC_JIT = 1 +endif -# Concatenate all the optoins -LINK_OPTS := $(TOOLLINKOPTS) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS) +# What the PowerPC JIT requires +ifdef ENABLE_PPC_JIT + JIT_LIBS += LLVMPowerPC LLVMSelectionDAG +endif -# Handle compression libraries automatically -ifeq ($(HAVE_BZIP2),1) -LIBS += -lbz2 +LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \ + LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \ + LLVMSystem.a $(PLATFORMLIBDL) endif -ifeq ($(HAVE_ZLIB),1) -LIBS += -lz + +#--------------------------------------------------------- +# Set up variables for building a tool. +#--------------------------------------------------------- +ifdef EXAMPLE_TOOL +ToolBuildPath := $(ExmplDir)/$(TOOLNAME)$(EXEEXT) +else +ToolBuildPath := $(ToolDir)/$(TOOLNAME)$(EXEEXT) endif +ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS))) +ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o, $(ProjLibsOptions)) +LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS))) +LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions)) +ProjUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS))) +LLVMUsedLibs := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS))) +ProjLibsPaths := $(addprefix $(LibDir)/,$(ProjUsedLibs)) +LLVMLibsPaths := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs)) -# Tell make that we need to rebuild subdirectories before we can link the tool. -# This affects things like LLI which has library subdirectories. -$(TOOLEXENAME): $(addsuffix /.makeall, $(PARALLEL_DIRS)) +#--------------------------------------------------------- +# Tell make that we need to rebuild subdirectories before +# we can link the tool. This affects things like LLI which +# has library subdirectories. +#--------------------------------------------------------- +$(ToolBuildPath): $(addsuffix /.makeall, $(PARALLEL_DIRS)) -all-local:: $(TOOLEXENAME) +#--------------------------------------------------------- +# Provide targets for building the tools +#--------------------------------------------------------- +all-local:: $(ToolBuildPath) clean-local:: -ifneq ($(strip $(TOOLEXENAME)),) - $(VERB) $(RM) -f $(TOOLEXENAME) +ifneq ($(strip $(ToolBuildPath)),) + -$(Verb) $(RM) -f $(ToolBuildPath) endif -$(TOOLEXENAME): $(BUILT_SOURCES) $(ObjectsO) $(PROJ_LIBS_PATHS) $(LLVM_LIBS_PATHS) $(TOOLDIR)/.dir - @$(ECHO) Linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG) - $(VERB) $(Link) -o $@ $(ObjectsO) $(PROJ_LIBS_OPTIONS) $(LLVM_LIBS_OPTIONS) $(LIBS) - @$(ECHO) ======= Finished linking $(CONFIGURATION) executable $(TOOLNAME) $(STRIP_WARN_MSG) - -install-local:: install-tool +ifdef EXAMPLE_TOOL +$(ToolBuildPath): $(ExmplDir)/.dir +else +$(ToolBuildPath): $(ToolDir)/.dir +endif -DestTool = $(bindir)/$(TOOLNAME) +$(ToolBuildPath): $(ObjectsO) $(ProjLibsPaths) $(LLVMLibsPaths) + $(Echo) Linking $(BuildMode) executable $(TOOLNAME) $(StripWarnMsg) + $(Verb) $(Link) -o $@ $(TOOLLINKOPTS) $(ObjectsO) $(ProjLibsOptions) \ + $(LLVMLibsOptions) $(ExtraLibs) $(TOOLLINKOPTSB) $(LIBS) + $(Echo) ======= Finished Linking $(BuildMode) Executable $(TOOLNAME) $(StripWarnMsg) -install-tool: $(DestTool) +DestTool = $(PROJ_bindir)/$(TOOLNAME) -$(DestTool): $(TOOLEXENAME) - @$(ECHO) Installing $(DestTool) - $(VERB) $(INSTALL) $(TOOLEXENAME) $(bindir) +install-local:: $(DestTool) -uninstall-local:: uninstall-tool +$(DestTool): $(PROJ_bindir) $(ToolBuildPath) + $(Echo) Installing $(BuildMode) $(DestTool) + $(Verb) $(ProgInstall) $(ToolBuildPath) $(DestTool) -uninstall-tool: - @$(ECHO) Uninstalling $(DestTool) - $(VERB) $(RM) -f $(DestTool) +uninstall-local:: + $(Echo) Uninstalling $(BuildMode) $(DestTool) + -$(Verb) $(RM) -f $(DestTool) endif +############################################################################### +# Object Build Rules: Build object files based on sources +############################################################################### + +# Provide rule sets for when dependency generation is enabled ifndef DISABLE_AUTO_DEPENDENCIES -# Create .lo files in the OBJDIR directory from the .cpp and .c files... +#--------------------------------------------------------- +# Create .lo files in the ObjDir directory from the .cpp and .c files... +#--------------------------------------------------------- ifdef SHARED_LIBRARY -$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" - $(VERB) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(OBJDIR)/$*.LACXXd $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.LACXXd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.LACXXd"; exit 1; fi +$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)" + $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi -$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Shared Library" - $(VERB) if $(LTCompile.C) -MD -MT $@ -MP -MF $(OBJDIR)/$*.LACd $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.LACd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.LACd"; exit 1; fi +$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)" + $(Verb) if $(LTCompile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACXXd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.LACXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.LACXXd"; exit 1; fi -else +$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)" + $(Verb) if $(LTCompile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.LACd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.LACd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.LACd"; exit 1; fi -$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" - $(VERB) if $(Compile.CXX) -MD -MT $@ -MP -MF $(OBJDIR)/$*.CXXd $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.CXXd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.CXXd"; exit 1; fi +#--------------------------------------------------------- +# Create .o files in the ObjDir directory from the .cpp and .c files... +#--------------------------------------------------------- +else -$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.c For Archive" - $(VERB) if $(Compile.C) -MD -MT $@ -MP -MF $(OBJDIR)/$*.Cd $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.Cd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.Cd"; exit 1; fi +$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build" + $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi -endif +$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build" + $(Verb) if $(Compile.CXX) -MD -MT $@ -MP -MF $(ObjDir)/$*.CXXd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.CXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.CXXd"; exit 1; fi -# Create .bc files in the OBJDIR directory from .cpp and .c files... -$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp to bytecode" - $(VERB) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.BCCXXd" $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.BCCXXd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.BCCXXd"; exit 1; fi +$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build" + $(Verb) if $(Compile.C) -MD -MT $@ -MP -MF $(ObjDir)/$*.Cd $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.Cd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.Cd"; exit 1; fi -$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.c to bytecode" - $(VERB) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(OBJDIR)/$*.BCCd" $< -o $@ ; \ - then $(MV) -f "$(OBJDIR)/$*.BCCd" "$(OBJDIR)/$*.d"; \ - else $(RM) -f "$(OBJDIR)/$*.BCCd"; exit 1; fi +endif +#--------------------------------------------------------- +# Create .bc files in the ObjDir directory from .cpp .cc and .c files... +#--------------------------------------------------------- +$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)" + $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi + +$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)" + $(Verb) if $(BCCompile.CXX) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCXXd" $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.BCCXXd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.BCCXXd"; exit 1; fi + +$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)" + $(Verb) if $(BCCompile.C) -MD -MT $@ -MP -MF "$(ObjDir)/$*.BCCd" $< -o $@ ; \ + then $(MV) -f "$(ObjDir)/$*.BCCd" "$(ObjDir)/$*.d"; \ + else $(RM) -f "$(ObjDir)/$*.BCCd"; exit 1; fi + +# Provide alternate rule sets if dependencies are disabled else ifdef SHARED_LIBRARY -$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" +$(ObjDir)/%.lo $(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build (PIC)" + $(LTCompile.CXX) $< -o $@ + +$(ObjDir)/%.lo $(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build (PIC)" $(LTCompile.CXX) $< -o $@ -$(OBJDIR)/%.lo $(OBJDIR)/%.o: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Shared Library" +$(ObjDir)/%.lo $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build (PIC)" $(LTCompile.C) $< -o $@ else -$(OBJDIR)/%.o: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" +$(ObjDir)/%.o: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build" $(Compile.CXX) $< -o $@ -$(OBJDIR)/%.o: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp For Archive" - $(Compile.C) $< -o $@ -endif - -# Create .bc files in the OBJDIR directory from .cpp and .c files... -$(OBJDIR)/%.bc: %.cpp $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.cpp To Bytecode" - $(BCCompileCPP) $< -o $@ - -$(OBJDIR)/%.bc: %.c $(OBJDIR)/.dir - @$(ECHO) "Compiling $(CONFIGURATION) $*.c To Bytecode" - $(BCCompileC) $< -o $@ +$(ObjDir)/%.o: %.cc $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build" + $(Compile.CXX) $< -o $@ +$(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build" + $(Compile.C) $< -o $@ endif -$(OBJDIR)/%.bc: %.ll $(OBJDIR)/.dir $(LLVMAS) - @$(ECHO) "Compiling $*.ll To Bytecode" - $(VERB) $(LLVMAS) $< -f -o $@ +$(ObjDir)/%.bc: %.cpp $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.cpp for $(BuildMode) build (bytecode)" + $(BCCompile.CXX) $< -o $@ -ifdef TARGET +$(ObjDir)/%.bc: %.cc $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.cc for $(BuildMode) build (bytecode)" + $(BCCompile.CXX) $< -o $@ -TDFILES := $(strip $(wildcard $(BUILD_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td) +$(ObjDir)/%.bc: %.c $(ObjDir)/.dir $(GCCAS) $(BUILT_SOURCES) + $(Echo) "Compiling $*.c for $(BuildMode) build (bytecode)" + $(BCCompile.C) $< -o $@ -$(BUILT_SOURCES): $(TDFILES) +endif -%GenRegisterNames.inc : %.td - @echo "Building $( $@.tmp - $(VERB) cmp -s $@ $@.tmp > /dev/null || $(MV) -f $@.tmp $@ - @# remove the output of flex if it didn't get moved over... - @rm -f $@.tmp + > $@ + +clean-local:: + -$(Verb) $(RM) -f $(LexOutput) + $(Verb) $(RM) -f $(LexOutput) + +endif + +#--------------------------------------------------------- +# Provide rules for generating a .cpp and .h source files +# from yacc (bison) input sources. +#--------------------------------------------------------- + +YaccFiles := $(filter %.y,$(Sources)) +ifneq ($(YaccFiles),) +YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output) + +.PRECIOUS: $(YaccOutput) + +# Cancel built-in rules for yacc +%.c: %.y +%.cpp: %.y +%.h: %.y # Rule for building the bison parsers... -%.c: %.y # Cancel built-in rules for yacc -%.h: %.y # Cancel built-in rules for yacc %.cpp %.h : %.y - @$(ECHO) "Bisoning $*.y" - $(VERB) $(BISON) -v -d -p $( /dev/null || $(MV) -f $*.tab.c $*.cpp - $(VERB) cmp -s $*.tab.h $*.h > /dev/null || $(MV) -f $*.tab.h $*.h - @# If the files were not updated, don't leave them lying around... - @rm -f $*.tab.c $*.tab.h - -# To create the directories... -%/.dir: - $(VERB) $(MKDIR) $* > /dev/null - @$(DATE) > $@ + $(Echo) "Bisoning $*.y" + $(Verb) $(BISON) -v -d -p $( $@ else %.ps: %.dot - $(ECHO) "Cannot build $@: The program dot is not installed" + $(Echo) "Cannot build $@: The program dot is not installed" endif -# # This rules ensures that header files that are removed still have a rule for # which they can be "generated." This allows make to ignore them and # reproduce the dependency lists. -# %.h:: ; +%.hpp:: ; -# 'make clean' nukes the tree +# Define clean-local to clean the current directory. Note that this uses a +# very conservative approach ensuring that empty variables do not cause +# errors or disastrous removal. clean-local:: -ifneq ($(strip $(OBJDIR)),) - $(VERB) $(RM) -rf $(OBJDIR) +ifneq ($(strip $(ObjDir)),) + -$(Verb) $(RM) -rf $(ObjDir) endif - $(VERB) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc + -$(Verb) $(RM) -f core core.[0-9][0-9]* *.o *.d *~ *.flc ifneq ($(strip $(SHLIBEXT)),) # Extra paranoia - make real sure SHLIBEXT is set - $(VERB) $(RM) -f *$(SHLIBEXT) -endif -ifneq ($(strip $(LEX_OUTPUT)),) - $(VERB) $(RM) -f $(LEX_OUTPUT) -endif -ifneq ($(strip $(YACC_OUTPUT)),) - $(VERB) $(RM) -f $(YACC_OUTPUT) + -$(Verb) $(RM) -f *$(SHLIBEXT) endif +clean-all-local:: + -$(Verb) $(RM) -rf Debug Release Profile + +# Build tags database for Emacs/Xemacs: +tags:: TAGS CTAGS + +TAGS: + find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \ + $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \ + $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \ + $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \ + -name '*.cpp' -o -name '*.h' | \ + $(ETAGS) $(ETAGSFLAGS) - + +CTAGS: + find $(PROJ_SRC_ROOT)/include $(PROJ_SRC_ROOT)/lib \ + $(PROJ_SRC_ROOT)/tools $(PROJ_SRC_ROOT)/examples \ + $(PROJ_OBJ_ROOT)/include $(PROJ_OBJ_ROOT)/lib \ + $(PROJ_OBJ_ROOT)/tools $(PROJ_OBJ_ROOT)/examples \ + \( -name '*.cpp' -o -name '*.h' \) -print | \ + ctags -ImtT -o $(PROJ_OBJ_ROOT)/CTAGS -L - + + ############################################################################### # DEPENDENCIES: Include the dependency files if we should ############################################################################### ifndef DISABLE_AUTO_DEPENDENCIES # If its not one of the cleaning targets -ifneq ($strip($(filter-out clean clean-local dist-clean, $(MAKECMDGOALS))),) +ifneq ($strip($(filter-out clean clean-local dist-clean,$(MAKECMDGOALS))),) # Get the list of dependency files -DependFiles := $(basename $(filter %.cpp %.c %.cc, $(SOURCES))) -DependFiles := $(patsubst %,$(BUILD_OBJ_DIR)/$(CONFIGURATION)/%.d,$(DependFiles)) +DependFiles := $(basename $(filter %.cpp %.c %.cc, $(Sources))) +DependFiles := $(patsubst %,$(PROJ_OBJ_DIR)/$(BuildMode)/%.d,$(DependFiles)) -include /dev/null $(DependFiles) endif -endif # ifndef DISABLE_AUTO_DEPENDENCIES - -################################################################################ -# PRECONDITIONS - that which must be built/checked first -################################################################################ - -OBJMKFILE := $(BUILD_OBJ_DIR)/Makefile -SRCMKFILE := $(BUILD_SRC_DIR)/Makefile -CONFIGURE := $(LLVM_SRC_ROOT)/configure -CONFIG_STATUS := $(LLVM_OBJ_ROOT)/config.status -MAKE_CONFIG_IN := $(LLVM_SRC_ROOT)/Makefile.config.in -MAKE_CONFIG := $(LLVM_OBJ_ROOT)/Makefile.config - -#------------------------------------------------------------------------ -# List of the preconditions -#------------------------------------------------------------------------ +endif -preconditions: $(CONFIG_STATUS) $(MAKE_CONFIG) $(OBJMKFILE) +############################################################################### +# CHECK: Running the test suite +############################################################################### -$(filter-out clean clean-local,USER_TARGETS):: $(BUILT_SOURCES) +check:: + $(Verb) if test -d "$(PROJ_OBJ_ROOT)/test" ; then \ + if test -f "$(PROJ_OBJ_ROOT)/test/Makefile" ; then \ + $(EchoCmd) Running test suite ; \ + $(MAKE) -C $(PROJ_OBJ_ROOT)/test check-local \ + TESTSUITE=$(TESTSUITE) ; \ + else \ + $(EchoCmd) No Makefile in test directory ; \ + fi ; \ + else \ + $(EchoCmd) No test directory ; \ + fi -clean-local:: -ifneq ($(strip $(BUILT_SOURCES)),) - $(VERB) $(RM) -f $(BUILT_SOURCES) -endif +############################################################################### +# DISTRIBUTION: Handle construction of a distribution tarball +############################################################################### #------------------------------------------------------------------------ -# Make sure we're not using a stale configuration +# Define distribution related variables #------------------------------------------------------------------------ -.PRECIOUS: $(CONFIG_STATUS) -$(CONFIG_STATUS): $(CONFIGURE) - @$(ECHO) Reconfiguring with $< - $(VERB) $(CONFIG_STATUS) --recheck $(CONFIGUREFLAGS) +DistName := $(PROJECT_NAME)-$(PROJ_VERSION) +DistDir := $(PROJ_OBJ_ROOT)/$(DistName) +TopDistDir := $(PROJ_OBJ_ROOT)/$(DistName) +DistTarGZip := $(PROJ_OBJ_ROOT)/$(DistName).tar.gz +DistZip := $(PROJ_OBJ_ROOT)/$(DistName).zip +DistTarBZ2 := $(PROJ_OBJ_ROOT)/$(DistName).tar.bz2 +DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \ + ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \ + Makefile.config.in configure autoconf +DistOther := $(notdir $(wildcard \ + $(PROJ_SRC_DIR)/*.h \ + $(PROJ_SRC_DIR)/*.td \ + $(PROJ_SRC_DIR)/*.def \ + $(PROJ_SRC_DIR)/*.ll \ + $(PROJ_SRC_DIR)/*.in)) +DistSubDirs := $(SubDirs) +DistSources = $(Sources) $(EXTRA_DIST) +DistFiles = $(DistAlways) $(DistSources) $(DistOther) #------------------------------------------------------------------------ -# Make sure the configuration makefile is up to date +# We MUST build distribution with OBJ_DIR != SRC_DIR #------------------------------------------------------------------------ -$(MAKE_CONFIG): $(MAKE_CONFIG_IN) $(CONFIG_STATUS) - @$(ECHO) Regenerating $@ - $(VERB) cd $(LLVM_OBJ_ROOT) ; $(CONFIG_STATUS) Makefile.config +ifeq ($(PROJ_SRC_DIR),$(PROJ_OBJ_DIR)) +dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip :: + $(Echo) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR + +else #------------------------------------------------------------------------ -# If the Makefile in the source tree has been updated, copy it over into the -# build tree. But, only do this if the source and object makefiles differ +# Prevent attempt to run dist targets from anywhere but the top level #------------------------------------------------------------------------ -ifneq ($(OBJMKFILE),$(SRCMKFILE)) -.PRECIOUS: $(OBJMKFILE) -$(OBJMKFILE): $(SRCMKFILE) - @$(ECHO) "Updating Makefile from: $(dir $<)" - $(VERB) $(MKDIR) $(@D) - $(VERB) cp -f $< $@ -endif - -############################################################################### -# Handle construction of a distribution tarball -############################################################################### - -.PHONY: dist dist-chck dist-clean distdir dist-gzip dist-bzip2 dist-zip - -ifeq ($(BUILD_SRC_DIR),$(BUILD_OBJ_DIR)) - +ifneq ($(LEVEL),.) dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip :: - @$(ECHO) ERROR: Target $@ only available with OBJ_DIR != SRC_DIR - + $(Echo) ERROR: You must run $@ from $(PROJ_OBJ_ROOT) else -ifeq ($(LLVM_TARBALL_NAME),) -$(error LLVM_TARBALL_NAME is empty. Please rerun configure) -endif +#------------------------------------------------------------------------ +# Provide the top level targets +#------------------------------------------------------------------------ -ifneq ($(LEVEL),.) +dist-gzip:: $(DistTarGZip) -dist dist-check dist-clean dist-gzip dist-bzip2 dist-zip :: - @$(ECHO) ERROR: You must run $@ from $(BUILD_OBJ_ROOT) +$(DistTarGZip) : $(TopDistDir)/.makedistdir + $(Echo) Packing gzipped distribution tar file. + $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - "$(DistName)" | \ + $(GZIP) -c > "$(DistTarGZip)" -DistTopCheck := +dist-bzip2:: $(DistTarBZ2) -else +$(DistTarBZ2) : $(TopDistDir)/.makedistdir + $(Echo) Packing bzipped distribution tar file. + $(Verb) cd $(PROJ_OBJ_ROOT) ; $(TAR) chf - $(DistName) | \ + $(BZIP2) -c >$(DistTarBZ2) -DistTopCheck := check +dist-zip:: $(DistZip) -dist-gzip: distdir - @$(ECHO) Packing gzipped distribution tar file. - $(VERB) $(TAR) chf - "$(TopDistDir)" | gzip -c > "$(DistTarGZip)" +$(DistZip) : $(TopDistDir)/.makedistdir + $(Echo) Packing zipped distribution file. + $(Verb) rm -f $(DistZip) + $(Verb) cd $(PROJ_OBJ_ROOT) ; $(ZIP) -rq $(DistZip) $(DistName) -dist-bzip2: distdir - @$(ECHO) Packing bzipped distribution tar file. - $(VERB) $(TAR) chf - $(DistName) | $(BZIP2) -c >$(DistTarBZ2) +dist :: $(DistTarGZip) $(DistTarBZ2) $(DistZip) + $(Echo) ===== DISTRIBUTION PACKAGING SUCESSFUL ===== -dist-zip: distdir - @$(ECHO) Packing zipped distribution file. - $(VERB) rm -f $(DistZip) - $(VERB) $(ZIP) -rq $(DistZip) $(DistName) +DistCheckDir := $(PROJ_OBJ_ROOT)/_distcheckdir -dist :: distdir - @$(ECHO) Packing gzipped distribution tar file. - $(VERB) $(TAR) chf - $(DistName) | $(GZIP) -c >$(DistTarGZip) - @$(ECHO) Packing bzipped distribution tar file. - $(VERB) $(TAR) chf - $(DistName) | $(BZIP2) -c >$(DistTarBZ2) - @$(ECHO) Packing zipped distribution file. - $(VERB) rm -f $(DistZip) - $(VERB) $(ZIP) -rq $(DistZip) $(DistName) - @$(ECHO) ===== DISTRIBUTION PACKAGING SUCESSFUL ===== - -dist-check:: dist +dist-check:: $(DistTarGZip) + $(Echo) Checking distribution tar file. + $(Verb) if test -d $(DistCheckDir) ; then \ + $(RM) -rf $(DistCheckDir) ; \ + fi + $(Verb) $(MKDIR) $(DistCheckDir) + $(Verb) cd $(DistCheckDir) && \ + $(MKDIR) $(DistCheckDir)/build && \ + $(MKDIR) $(DistCheckDir)/install && \ + gunzip -c $(DistTarGZip) | $(TAR) xf - && \ + cd build && \ + ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \ + --srcdir=../$(DistName) && \ + $(MAKE) all && \ + $(MAKE) check && \ + $(MAKE) install && \ + $(MAKE) uninstall && \ + $(MAKE) dist && \ + $(MAKE) clean && \ + $(MAKE) dist-clean && \ + $(EchoCmd) ===== $(DistTarGZip) Ready For Distribution ===== dist-clean:: - @$(ECHO) Cleaning distribution files - $(VERB) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) + $(Echo) Cleaning distribution files + -$(Verb) $(RM) -rf $(DistTarGZip) $(DistTarBZ2) $(DistZip) $(DistName) \ + $(DistCheckDir) endif -DistName := $(LLVM_TARBALL_NAME) -DistDir := $(BUILD_OBJ_ROOT)/$(DistName) -TopDistDir := $(DistDir) -DistTarGZip := $(BUILD_OBJ_ROOT)/$(DistName).tar.gz -DistZip := $(BUILD_OBJ_ROOT)/$(DistName).zip -DistTarBZ2 := $(BUILD_OBJ_ROOT)/$(DistName).tar.bz2 -DistAlways := CREDITS.TXT LICENSE.TXT README.txt README AUTHORS COPYING \ - ChangeLog INSTALL NEWS Makefile Makefile.common Makefile.rules \ - Makefile.config.in -DistSources := $(filter-out projects,$(SOURCES) $(EXTRA_DIST)) -DistSubDirs := $(filter-out projects,$(SUBDIRS)) -DistFiles := $(DistAlways) $(DistSources) -RmDistDir := { test ! -d $(DistDir) || { \ - find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf $(DistDir); }; } - -distdir : $(DistTopCheck) $(DistSources) - @$(ECHO) Building Distribution Directory $(DistDir) - $(VERB) $(RmDistDir) - $(VERB) $(MKDIR) $(DistDir) - $(VERB) srcdirstrip=`echo "$(BUILD_SRC_DIR)" | sed 's|.|.|g'`; \ - srcrootstrip=`echo "$(BUILD_SRC_ROOT)" | sed 's|.|.|g'`; \ +#------------------------------------------------------------------------ +# Provide the recursive distdir target for building the distribution directory +#------------------------------------------------------------------------ +distdir: $(DistDir)/.makedistdir +$(DistDir)/.makedistdir: $(DistSources) + $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \ + if test -d "$(DistDir)" ; then \ + find $(DistDir) -type d ! -perm -200 -exec chmod u+w {} ';' || \ + exit 1 ; \ + fi ; \ + $(EchoCmd) Removing old $(DistDir) ; \ + $(RM) -rf $(DistDir); \ + $(EchoCmd) Making 'all' to verify build ; \ + $(MAKE) all ; \ + fi + $(Echo) Building Distribution Directory $(DistDir) + $(Verb) $(MKDIR) $(DistDir) + $(Verb) srcdirstrip=`echo "$(PROJ_SRC_DIR)" | sed 's|.|.|g'`; \ + srcrootstrip=`echo "$(PROJ_SRC_ROOT)" | sed 's|.|.|g'`; \ for file in $(DistFiles) ; do \ case "$$file" in \ - $(BUILD_SRC_DIR)/*) file=`echo "$$file" | sed "s#^$$srcdirstrip/##"`;; \ - $(BUILD_SRC_ROOT)/*) file=`echo "$$file" | sed "s#^$srcrootstrip/#$(BUILD_OBJ_ROOT)/#"`;; \ + $(PROJ_SRC_DIR)/*) \ + file=`echo "$$file" | sed "s#^$$srcdirstrip/##"` \ + ;; \ + $(PROJ_SRC_ROOT)/*) \ + file=`echo "$$file" | \ + sed "s#^$$srcrootstrip/##"` \ + ;; \ esac; \ - if test -f "$$file" || test -d "$$file" ; then \ + if test -f "$(PROJ_SRC_DIR)/$$file" || \ + test -d "$(PROJ_SRC_DIR)/$$file" ; then \ + from_dir="$(PROJ_SRC_DIR)" ; \ + elif test -f "$$file" || test -d "$$file" ; then \ from_dir=. ; \ - else \ - from_dir=$(BUILD_SRC_DIR); \ - fi; \ - to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'`; \ + fi ; \ + to_dir=`echo "$$file" | sed -e 's#/[^/]*$$##'` ; \ if test "$$to_dir" != "$$file" && test "$$to_dir" != "."; then \ to_dir="$(DistDir)/$$dir"; \ $(MKDIR) "$$to_dir" ; \ @@ -946,41 +1411,49 @@ distdir : $(DistTopCheck) $(DistSources) fi; \ mid_dir=`echo "$$file" | sed -n -e 's#^\(.*\)/[^/]*$$#\1#p'`; \ if test -n "$$mid_dir" ; then \ - $(MKDIR) "$$to_dir/$$mid_dir" ; \ + $(MKDIR) "$$to_dir/$$mid_dir" || exit 1; \ fi ; \ if test -d "$$from_dir/$$file"; then \ - if test -d "$(BUILD_SRC_DIR)/$$file" && \ - test "$$from_dir" != "$(BUILD_SRC_DIR)" ; then \ - cp -pR "$(BUILD_SRC_DIR)/$$file" "$$to_dir" || exit 1; \ + if test -d "$(PROJ_SRC_DIR)/$$file" && \ + test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \ + $(CP) -pR "$(PROJ_SRC_DIR)/$$file" "$$to_dir" || exit 1; \ fi; \ - cp -pR $$from_dir/$$file $$to_dir || exit 1; \ + $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \ elif test -f "$$from_dir/$$file" ; then \ - cp -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \ + $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \ elif test -L "$$from_dir/$$file" ; then \ - cp -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \ + $(CP) -pd "$$from_dir/$$file" $(DistDir)/$$file || exit 1; \ elif echo "$(DistAlways)" | grep -v "$$file" >/dev/null ; then \ - $(ECHO) "===== WARNING: Distribution Source $$from_dir/$$file Not Found!" ; \ - elif test "$(VERB)" != '@' ; then \ - $(ECHO) "Skipping non-existent $$from_dir/$$file" ; \ + $(EchoCmd) "===== WARNING: Distribution Source " \ + "$$from_dir/$$file Not Found!" ; \ + elif test "$(Verb)" != '@' ; then \ + $(EchoCmd) "Skipping non-existent $$from_dir/$$file" ; \ fi; \ done - $(VERB) for subdir in $(SUBDIRS) ; do \ + $(Verb) for subdir in $(DistSubDirs) ; do \ if test "$$subdir" \!= "." ; then \ - test -d "$(DistDir)/$$subdir" || $(MKDIR) "$(DistDir)/$$subdir" || exit 1; \ new_distdir="$(DistDir)/$$subdir" ; \ - ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || exit 1; \ + test -d "$$new_distdir" || $(MKDIR) "$$new_distdir" || exit 1; \ + ( cd $$subdir && $(MAKE) DistDir="$$new_distdir" distdir ) || \ + exit 1; \ fi; \ done - $(VERB) $(MAKE) DistDir="$(DistDir)" dist-hook - -$(VERB) find $(DistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \ - || chmod -R a+r $(DistDir) + $(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \ + $(EchoCmd) Eliminating CVS directories from distribution ; \ + $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\ + $(MAKE) dist-hook ; \ + $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \ + -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \ + -o ! -type d ! -perm -400 -exec chmod a+r {} \; \ + -o ! -type d ! -perm -444 -exec \ + $(SHELL) $(INSTALL_SH) -c -m a+r {} {} \; \ + || chmod -R a+r $(DistDir) ; \ + fi +# This is invoked by distdir target, define it as a no-op to avoid errors if not +# defined by user. dist-hook:: - endif ############################################################################### @@ -990,63 +1463,75 @@ endif ifeq ($(LEVEL),.) #------------------------------------------------------------------------ -# Install support for project's include files: +# Install support for the project's include files: #------------------------------------------------------------------------ install-local:: - @$(ECHO) Installing include files - $(VERB) $(MKDIR) $(includedir) - $(VERB) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \ - cd $(BUILD_SRC_ROOT)/include && \ - find . -path '*/Internal' -prune -o '(' -type f \ - '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \ - -print ')' | grep -v CVS | pax -rwdvpe $(includedir) ; \ + $(Echo) Installing include files + $(Verb) $(MKDIR) $(PROJ_includedir) + $(Verb) if test -d "$(PROJ_SRC_ROOT)/include" ; then \ + cd $(PROJ_SRC_ROOT)/include && \ + for hdr in `find . -type f '!' '(' -name '*~' -o -name '.cvsignore' \ + -o -name '.#*' -o -name '*.in' ')' -print | grep -v CVS ` ; do \ + instdir=`dirname "$(PROJ_includedir)/$$hdr"` ; \ + if test \! -d "$$instdir" ; then \ + $(EchoCmd) Making install directory $$instdir ; \ + $(MKDIR) $$instdir ;\ + fi ; \ + $(DataInstall) $$hdr $(PROJ_includedir)/$$hdr ; \ + done ; \ + fi + $(Verb) if test -d "$(PROJ_OBJ_ROOT)/include" ; then \ + cd $(PROJ_OBJ_ROOT)/include && \ + for hdr in `find . -type f -print` ; do \ + $(DataInstall) $$hdr $(PROJ_includedir)/$$hdr ; \ + done ; \ fi uninstall-local:: - @$(ECHO) Uninstalling include files - $(VERB) if [ -d "$(BUILD_SRC_ROOT)/include" ] ; then \ - cd $(BUILD_SRC_ROOT)/include && \ + $(Echo) Uninstalling include files + $(Verb) if [ -d "$(PROJ_SRC_ROOT)/include" ] ; then \ + cd $(PROJ_SRC_ROOT)/include && \ $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f \ - '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' ')' \ - -print ')' | grep -v CVS | sed 's#^#$(includedir)/#'` ; \ - fi - -#------------------------------------------------------------------------ -# Build tags database for Emacs/Xemacs: -#------------------------------------------------------------------------ -tags:: TAGS - -TAGS: - find include lib tools examples -name '*.cpp' -o -name '*.h' | $(ETAGS) $(ETAGSFLAGS) - + '!' '(' -name '*~' -o -name '.cvsignore' -o -name '.#*' -o -name '*.in' ')' \ + -print ')' | grep -v CVS | sed 's#^#$(PROJ_includedir)/#'` ; \ + cd $(PROJ_SRC_ROOT)/include && \ + $(RM) -f `find . -path '*/Internal' -prune -o '(' -type f -name '*.in' -print ')' \ + | sed 's#\.in$$##;s#^#$(PROJ_includedir)/#'` ; \ + fi endif -############################################################################### -# MISCELLANEOUS - utility targets -############################################################################### - #------------------------------------------------------------------------ # Print out the directories used for building +#------------------------------------------------------------------------ printvars:: - @$(ECHO) "BUILD_SRC_ROOT: " $(BUILD_SRC_ROOT) - @$(ECHO) "BUILD_SRC_DIR : " $(BUILD_SRC_DIR) - @$(ECHO) "BUILD_OBJ_ROOT: " $(BUILD_OBJ_ROOT) - @$(ECHO) "BUILD_OBJ_DIR : " $(BUILD_OBJ_DIR) - @$(ECHO) "LLVM_SRC_ROOT : " $(LLVM_SRC_ROOT) - @$(ECHO) "LLVM_OBJ_ROOT : " $(LLVM_OBJ_ROOT) - @$(ECHO) "CONFIGURATION : " $(CONFIGURATION) - @$(ECHO) "OBJDIR: " $(OBJDIR) - @$(ECHO) "LIBDIR: " $(LIBDIR) - @$(ECHO) "TOOLDIR: " $(TOOLDIR) - @$(ECHO) "TDFILES:" '$(TDFILES)' - @$(ECHO) "Compile.CXX: " '$(Compile.CXX)' - @$(ECHO) "Compile.C: " '$(Compile.C)' - -# This frivolous target provided for Resistor who requested that the makefiles -# be hardened and that he get a "pony" after the makefiles (accidentally) -# deleted his unix kernel. -pony:: - @wget -q \ - http://search.cpan.org/src/ASAVIGE/Acme-EyeDrops-1.40/lib/Acme/EyeDrops/pony2.eye \ - -O /tmp/resistor.pony - @cat /tmp/resistor.pony + $(Echo) "BuildMode : " '$(BuildMode)' + $(Echo) "PROJ_SRC_ROOT: " '$(PROJ_SRC_ROOT)' + $(Echo) "PROJ_SRC_DIR : " '$(PROJ_SRC_DIR)' + $(Echo) "PROJ_OBJ_ROOT: " '$(PROJ_OBJ_ROOT)' + $(Echo) "PROJ_OBJ_DIR : " '$(PROJ_OBJ_DIR)' + $(Echo) "LLVM_SRC_ROOT: " '$(LLVM_SRC_ROOT)' + $(Echo) "LLVM_OBJ_ROOT: " '$(LLVM_OBJ_ROOT)' + $(Echo) "PROJ_prefix : " '$(PROJ_prefix)' + $(Echo) "PROJ_bindir : " '$(PROJ_bindir)' + $(Echo) "PROJ_libdir : " '$(PROJ_libdir)' + $(Echo) "PROJ_etcdir : " '$(PROJ_etcdir)' + $(Echo) "PROJ_includedir : " '$(PROJ_includedir)' + $(Echo) "UserTargets : " '$(UserTargets)' + $(Echo) "ObjMakefiles : " '$(ObjMakefiles)' + $(Echo) "SrcMakefiles : " '$(SrcMakefiles)' + $(Echo) "ObjDir : " '$(ObjDir)' + $(Echo) "LibDir : " '$(LibDir)' + $(Echo) "ToolDir : " '$(ToolDir)' + $(Echo) "ExmplDir : " '$(ExmplDir)' + $(Echo) "Sources : " '$(Sources)' + $(Echo) "TDFiles : " '$(TDFiles)' + $(Echo) "INCFiles : " '$(INCFiles)' + $(Echo) "INCTMPFiles : " '$(INCTMPFiles)' + $(Echo) "PreConditions: " '$(PreConditions)' + $(Echo) "Compile.CXX : " '$(Compile.CXX)' + $(Echo) "Compile.C : " '$(Compile.C)' + $(Echo) "Archive : " '$(Archive)' + $(Echo) "YaccFiles : " '$(YaccFiles)' + $(Echo) "LexFiles : " '$(LexFiles)' + $(Echo) "Module : " '$(Module)'