X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=Makefile.rules;h=9f07c1ad6837f117ed359cfbff3d3878fca46d88;hb=183119cdf6b4c448170bfdd2d30ac32f9ee20e31;hp=d3e4ff9a255dc9585c7bf8ed09121ffd85e546ac;hpb=860598a29526f84c2df0a3e4584b82e1bcd2fe9a;p=oota-llvm.git

diff --git a/Makefile.rules b/Makefile.rules
index d3e4ff9a255..9f07c1ad683 100644
--- a/Makefile.rules
+++ b/Makefile.rules
@@ -77,7 +77,7 @@ ifneq ($(MakefileConfigIn),)
 PreConditions      += $(MakefileConfig)
 endif
 
-preconditions : $(PreConditions)
+preconditions: $(PreConditions)
 
 #------------------------------------------------------------------------
 # Make sure the BUILT_SOURCES are built first
@@ -275,6 +275,9 @@ endif
 ifndef LLI
 LLI      := $(LLVMToolDir)/lli$(EXEEXT)
 endif
+ifndef LLC
+LLC      := $(LLVMToolDir)/llc$(EXEEXT)
+endif
 ifndef LOPT
 LOPT     := $(LLVMToolDir)/opt$(EXEEXT)
 endif
@@ -340,6 +343,10 @@ endif
 
 CompileCommonOpts := -Wall -W -Wwrite-strings -Wno-unused
 
+ifeq ($(OS),HP-UX)
+  CompileCommonOpts += -D_REENTRANT -D_HPUX_SOURCE
+endif
+
 LD.Flags  += -L$(LibDir) -L$(LLVMLibDir) 
 CPP.Flags += -I$(PROJ_OBJ_DIR) -I$(PROJ_SRC_DIR) \
 	     -I$(PROJ_OBJ_ROOT)/include \
@@ -352,10 +359,13 @@ Compile.C     = $(CC) $(CPP.Flags) $(CompileCommonOpts) -c $(C.Flags)
 LTCompile.C   = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.C)
 BCCompile.C   = $(LLVMGCCWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
                 $(C.Flags) -c
+Preprocess.C  = $(CC) $(CPP.Flags) $(CompileCommonOpts) -E $(C.Flags)
+
 Compile.CXX   = $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -c
 LTCompile.CXX = $(LIBTOOL) $(LibTool.Flags) --mode=compile $(Compile.CXX)
 BCCompile.CXX = $(LLVMGXXWITHPATH) $(CPP.Flags) $(CompileCommonOpts) \
                 $(CXX.Flags) -c
+Preprocess.CXX= $(CXX) $(CPP.Flags) $(CompileCommonOpts) $(CXX.Flags) -E
 Link          = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
 	        $(CompileCommonOpts) $(LD.Flags) $(Strip)
 Relink        = $(LIBTOOL) $(LibTool.Flags) --mode=link $(CXX) $(CPP.Flags) \
@@ -416,17 +426,10 @@ endif
 # in the file so they get built before dependencies
 #---------------------------------------------------------
 
-$(PROJ_bindir):
-	$(Verb) $(MKDIR) $(PROJ_bindir)
-
-$(PROJ_libdir):
-	$(Verb) $(MKDIR) $(PROJ_libdir)
-
-$(PROJ_includedir):
-	$(Verb) $(MKDIR) $(PROJ_includedir)
-
-$(PROJ_etcdir):
-	$(Verb) $(MKDIR) $(PROJ_etcdir)
+$(PROJ_bindir): $(PROJ_bindir)/.dir
+$(PROJ_libdir): $(PROJ_libdir)/.dir
+$(PROJ_includedir): $(PROJ_includedir)/.dir
+$(PROJ_etcdir): $(PROJ_etcdir)/.dir
 
 # To create other directories, as needed, and timestamp their creation
 %/.dir:
@@ -546,6 +549,100 @@ uninstall-local::
 
 endif
 
+###############################################################################
+# Set up variables for building libararies
+###############################################################################
+
+#---------------------------------------------------------
+# Handle the special "JIT" value for LLVM_LIBS which is a
+# shorthand for a bunch of libraries that get the correct
+# JIT support for a library or a tool that runs JIT.
+#---------------------------------------------------------
+ifeq ($(LLVMLIBS),JIT)
+
+# Make sure we can get our own symbols in the tool
+Link += -dlopen self
+
+# Generic JIT libraries
+JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
+
+# You can enable the X86 JIT on a non-X86 host by setting the flag
+# ENABLE_X86_JIT on the make command line. If not, it will still be
+# enabled automagically on an X86 host.
+ifeq ($(ARCH), x86)
+  ENABLE_X86_JIT = 1
+endif
+
+# What the X86 JIT requires
+ifdef ENABLE_X86_JIT
+  JIT_LIBS += LLVMX86 LLVMSelectionDAG
+endif
+
+# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
+# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
+# enabled automagically on an SparcV9 host.
+ifeq ($(ARCH), Sparc)
+  ENABLE_SPARCV9_JIT = 1
+endif
+
+# What the Sparc JIT requires
+ifdef ENABLE_SPARCV9_JIT
+  JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
+              LLVMSparcV9LiveVar LLVMInstrumentation.a \
+              LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
+              LLVMDataStructure LLVMSparcV9RegAlloc
+endif
+
+# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
+# ENABLE_PPC_JIT on the make command line. If not, it will still be
+# enabled automagically on an PowerPC host.
+ifeq ($(ARCH), PowerPC)
+  ENABLE_PPC_JIT = 1
+endif
+
+# What the PowerPC JIT requires
+ifdef ENABLE_PPC_JIT
+  JIT_LIBS += LLVMPowerPC LLVMSelectionDAG
+endif
+
+# You can enable the Alpha JIT on a non-Alpha host by setting the flag
+# ENABLE_ALPHA_JIT on the make command line. If not, it will still be
+# enabled automagically on an Alpha host.
+ifeq ($(ARCH), Alpha)
+  ENABLE_ALPHA_JIT = 1
+endif
+
+# What the Alpha JIT requires
+ifdef ENABLE_ALPHA_JIT
+  JIT_LIBS += LLVMAlpha LLVMSelectionDAG
+endif
+
+LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts.a LLVMTransformUtils.a LLVMAnalysis.a \
+            LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
+            LLVMSystem.a $(PLATFORMLIBDL)
+endif
+
+#---------------------------------------------------------
+# Define various command line options pertaining to the
+# libraries needed when linking. There are "Proj" libs 
+# (defined by the user's project) and "LLVM" libs (defined 
+# by the # LLVM project).
+#---------------------------------------------------------
+# Some versions of gcc on Alpha produce too many symbols, so use a .a file
+ifeq ($(ARCH),Alpha)
+USEDLIBS :=  $(subst LLVMCore, LLVMCore.a, $(USEDLIBS))
+LLVMLIBS := $(subst LLVMCore, LLVMCore.a, $(LLVMLIBS))
+endif
+
+ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
+ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o,  $(ProjLibsOptions))
+LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
+LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
+ProjUsedLibs    := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
+LLVMUsedLibs    := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
+ProjLibsPaths   := $(addprefix $(LibDir)/,$(ProjUsedLibs))
+LLVMLibsPaths   := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
+
 ###############################################################################
 # Library Build Rules: Four ways to build a library
 ###############################################################################
@@ -560,7 +657,7 @@ endif
 
 ifdef MODULE_NAME
 ifeq ($(strip $(LLVMGCC)),)
-$(warning Modules require llvm-gcc but no llvm-gcc is available)
+$(warning Modules require llvm-gcc but no llvm-gcc is available ****)
 else
 
 Module     := $(LibDir)/$(MODULE_NAME).bc
@@ -571,7 +668,7 @@ LinkModule += -Xlinker -internalize-public-api-file=$(EXPORTED_SYMBOL_FILE)
 endif
 
 $(Module): $(BUILT_SOURCES) $(ObjectsBC) $(LibDir)/.dir $(GCCLD)
-	$(Echo) Building $(BuildMOde) Bytecode Module $(notdir $@)
+	$(Echo) Building $(BuildMode) Bytecode Module $(notdir $@)
 	$(Verb) $(LinkModule) -o $@ $(ObjectsBC)
 
 all-local:: $(Module)
@@ -594,7 +691,7 @@ install-local:: $(DestModule)
 
 $(DestModule): $(ModuleDestDir) $(Module) 
 	$(Echo) Installing $(BuildMode) Bytecode Module $(DestModule)
-	$(Verb) $(ProgInstall) $(Module) $(DestModule)
+	$(Verb) $(DataInstall) $(Module) $(DestModule)
 
 uninstall-local::
 	$(Echo) Uninstalling $(BuildMode) Bytecode Module $(DestModule)
@@ -627,10 +724,18 @@ ifdef SHARED_LIBRARY
 
 all-local:: $(LibName.LA)
 
+ifdef LINK_LIBS_IN_SHARED
+$(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
+	$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
+	$(Verb) $(Link) -o $@ $(ObjectsLO) \
+         $(ProjLibsOptions) $(LLVMLibsOptions)
+	$(Verb) $(LTInstall) $@ $(LibDir)
+else
 $(LibName.LA): $(ObjectsLO) $(LibDir)/.dir
 	$(Echo) Linking $(BuildMode) Shared Library $(LIBRARYNAME)$(SHLIBEXT)
 	$(Verb) $(Link) -o $@ $(ObjectsLO)
 	$(Verb) $(LTInstall) $@ $(LibDir)
+endif
 
 clean-local::
 ifneq ($(strip $(LibName.LA)),)
@@ -660,7 +765,7 @@ endif
 #---------------------------------------------------------
 ifdef BYTECODE_LIBRARY
 ifeq ($(strip $(LLVMGCC)),)
-$(warning Bytecode libraries require llvm-gcc which could not be found)
+$(warning Bytecode libraries require llvm-gcc which could not be found ****)
 else
 
 # make the C and C++ compilers strip debug info out of bytecode libraries.
@@ -708,7 +813,7 @@ install-local:: $(DestBytecodeLib)
 
 $(DestBytecodeLib): $(BytecodeDestDir) $(LibName.BCA) 
 	$(Echo) Installing $(BuildMode) Bytecode Archive $(DestBytecodeLib)
-	$(Verb) $(ProgInstall) $(LibName.BCA) $(DestBytecodeLib)
+	$(Verb) $(DataInstall) $(LibName.BCA) $(DestBytecodeLib)
 
 uninstall-local::
 	$(Echo) Uninstalling $(BuildMode) Bytecode Archive $(DestBytecodeLib)
@@ -719,10 +824,18 @@ endif
 
 #---------------------------------------------------------
 # ReLinked Library Targets:
-#   If the user didn't explicitly forbid building a 
-#   relinked then we provide targets for building them.
+#   If the user explicitly requests a relinked library with
+#   BUILD_RELINKED, provide it.  Otherwise, if they specify
+#   neither of BUILD_ARCHIVE or DONT_BUILD_RELINKED, give
+#   them one.
 #---------------------------------------------------------
+ifndef BUILD_ARCHIVE
 ifndef DONT_BUILD_RELINKED
+BUILD_RELINKED = 1
+endif
+endif
+
+ifdef BUILD_RELINKED
 
 all-local:: $(LibName.O)
 
@@ -793,79 +906,14 @@ endif
 
 ifdef TOOLNAME
 
-#---------------------------------------------------------
-# Handle the special "JIT" value for LLVM_LIBS which is a
-# shorthand for a bunch of libraries that get the correct
-# JIT support for a tool that runs JIT.
-#---------------------------------------------------------
-ifeq ($(LLVMLIBS),JIT)
-
-# Make sure we can get our own symbols in the tool
-Link += -dlopen self
-
-# Generic JIT libraries
-JIT_LIBS := LLVMInterpreter LLVMJIT LLVMCodeGen LLVMExecutionEngine
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-ifeq ($(ARCH), x86)
-  ENABLE_X86_JIT = 1
-endif
-
-# What the X86 JIT requires
-ifdef ENABLE_X86_JIT
-  JIT_LIBS  += LLVMX86 LLVMSelectionDAG
-endif
-
-# You can enable the SparcV9 JIT on a non-SparcV9 host by setting the flag
-# ENABLE_SPARCV9_JIT on the make command line. If not, it will still be
-# enabled automagically on an SparcV9 host.
-ifeq ($(ARCH), Sparc)
-  ENABLE_SPARCV9_JIT = 1
-endif
-
-# What the Sparc JIT requires
-ifdef ENABLE_SPARCV9_JIT
-  JIT_LIBS += LLVMSparcV9 LLVMSparcV9ModuloSched LLVMSparcV9InstrSched \
-              LLVMSparcV9LiveVar LLVMInstrumentation.a LLVMProfilePaths \
-	      LLVMBCWriter LLVMTransforms.a LLVMipo.a LLVMipa.a \
-	      LLVMDataStructure.a LLVMSparcV9RegAlloc
-endif
-
-# You can enable the PowerPC JIT on a non-PowerPC host by setting the flag
-# ENABLE_PPC_JIT on the make command line. If not, it will still be
-# enabled automagically on an PowerPC host.
-ifeq ($(ARCH), PowerPC)
-  ENABLE_PPC_JIT = 1
-endif
-
-# What the PowerPC JIT requires
-ifdef ENABLE_PPC_JIT
-  JIT_LIBS  += LLVMPowerPC
-endif
-
-LLVMLIBS := $(JIT_LIBS) LLVMScalarOpts LLVMAnalysis.a LLVMTransformUtils.a \
-             LLVMBCReader LLVMCore LLVMSupport.a LLVMTarget.a LLVMbzip2 \
-	     LLVMSystem.a $(PLATFORMLIBDL)
-endif
-
 #---------------------------------------------------------
 # Set up variables for building a tool.
 #---------------------------------------------------------
 ifdef EXAMPLE_TOOL
-ToolBuildPath   := $(ExmplDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath   := $(ExmplDir)/$(strip $(TOOLNAME))$(EXEEXT)
 else
-ToolBuildPath   := $(ToolDir)/$(TOOLNAME)$(EXEEXT)
+ToolBuildPath   := $(ToolDir)/$(strip $(TOOLNAME))$(EXEEXT)
 endif
-ProjLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
-ProjLibsOptions := $(patsubst %.o, $(LibDir)/%.o,  $(ProjLibsOptions))
-LLVMLibsOptions := $(patsubst %.a.o, -l%, $(addsuffix .o, $(LLVMLIBS)))
-LLVMLibsOptions := $(patsubst %.o, $(LLVMLibDir)/%.o, $(LLVMLibsOptions))
-ProjUsedLibs    := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
-LLVMUsedLibs    := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(LLVMLIBS)))
-ProjLibsPaths   := $(addprefix $(LibDir)/,$(ProjUsedLibs))
-LLVMLibsPaths   := $(addprefix $(LLVMLibDir)/,$(LLVMUsedLibs))
 
 #---------------------------------------------------------
 # Tell make that we need to rebuild subdirectories before 
@@ -965,6 +1013,20 @@ $(ObjDir)/%.o: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
 
 endif
 
+## Rules for building preprocessed (.i/.ii) outputs.
+$(BuildMode)/%.ii: %.cpp $(ObjDir)/.dir $(BUILT_SOURCES)
+	$(Echo) "Compiling $*.cpp for $(BuildMode) build to .ii file"
+	$(Verb) $(Preprocess.CXX) $< -o $@
+
+$(BuildMode)/%.ii: %.cc $(ObjDir)/.dir $(BUILT_SOURCES)
+	$(Echo) "Compiling $*.cc for $(BuildMode) build to .ii file"
+	$(Verb) $(Preprocess.CXX) $< -o $@
+
+ $(BuildMode)/%.i: %.c $(ObjDir)/.dir $(BUILT_SOURCES)
+	$(Echo) "Compiling $*.c for $(BuildMode) build to .i file"
+	$(Verb) $(Preprocess.C) $< -o $@
+
+
 #---------------------------------------------------------
 # Create .bc files in the ObjDir directory from .cpp .cc and .c files...
 #---------------------------------------------------------
@@ -1046,7 +1108,7 @@ $(ObjDir)/%.bc: %.ll $(ObjDir)/.dir $(LLVMAS)
 
 ifdef TARGET
 
-TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td)
+TDFiles := $(strip $(wildcard $(PROJ_SRC_DIR)/*.td) $(LLVM_SRC_ROOT)/lib/Target/Target.td $(LLVM_SRC_ROOT)/lib/Target/TargetSelectionDAG.td)
 INCFiles := $(filter %.inc,$(BUILT_SOURCES))
 INCTMPFiles := $(INCFiles:%=$(ObjDir)/%.tmp)
 .PRECIOUS: $(INCTMPFiles) $(INCFiles)
@@ -1103,6 +1165,16 @@ $(ObjDir)/%GenCodeEmitter.inc.tmp: %.td $(ObjDir)/.dir
 	$(Echo) "Building $(<F) code emitter with tblgen"
 	$(Verb) $(TableGen) -gen-emitter -o $@ $<
 
+$(TARGET:%=$(ObjDir)/%GenDAGISel.inc.tmp): \
+$(ObjDir)/%GenDAGISel.inc.tmp : %.td $(ObjDir)/.dir
+	$(Echo) "Building $(<F) instruction selector implementation with tblgen"
+	$(Verb) $(TableGen) -gen-dag-isel -o $@ $<
+
+$(TARGET:%=$(ObjDir)/%GenSubtarget.inc.tmp): \
+$(ObjDir)/%GenSubtarget.inc.tmp : %.td $(ObjDir)/.dir
+	$(Echo) "Building $(<F) subtarget information with tblgen"
+	$(Verb) $(TableGen) -gen-subtarget -o $@ $<
+
 clean-local::
 	-$(Verb) $(RM) -f $(INCFiles)
 
@@ -1121,9 +1193,9 @@ LexFiles  := $(filter %.l,$(Sources))
 
 ifneq ($(LexFiles),)
 
-LexOutput := $(strip $(patsubst %.l,%.cpp,$(LexFiles)))
-
-.PRECIOUS: $(LexOutput)
+# Cancel built-in rules for lex
+%.c: %.l
+%.cpp: %.l
 
 # Note the extra sed filtering here, used to cut down on the warnings emited 
 # by GCC.  The last line is a gross hack to work around flex aparently not 
@@ -1131,13 +1203,17 @@ LexOutput := $(strip $(patsubst %.l,%.cpp,$(LexFiles)))
 # uninitialized string buffers in LLVM we can generate very long tokens, so 
 # this is a hack around it.
 # FIXME.  (f.e. char Buffer[10000] )
-%.cpp: %.l
+$(PROJ_SRC_DIR)/%.cpp: $(PROJ_SRC_DIR)/%.l
 	$(Echo) Flexing $*.l
-	$(Verb) $(FLEX) -t $< | \
+	$(Verb) $(FLEX) -t $(PROJ_SRC_DIR)/$*.l | \
 	$(SED) 's/void yyunput/inline void yyunput/' | \
 	$(SED) 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' | \
 	$(SED) 's/#define YY_BUF_SIZE 16384/#define YY_BUF_SIZE (16384*64)/' \
-	  > $@
+	  > $(PROJ_SRC_DIR)/$*.cpp
+	$(Echo) "*** DON'T FORGET TO CHECK IN $*.cpp (generated file)"
+
+LexObjs := $(patsubst %.l,$(ObjDir)/%.o,$(LexFiles))
+$(LexObjs): $(ObjDir)/%.o : $(PROJ_SRC_DIR)/%.cpp
 
 clean-local::
 	-$(Verb) $(RM) -f $(LexOutput)
@@ -1152,7 +1228,7 @@ endif
 
 YaccFiles  := $(filter %.y,$(Sources))
 ifneq ($(YaccFiles),)
-YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output)
+YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.output)
 
 .PRECIOUS: $(YaccOutput)
 
@@ -1162,14 +1238,14 @@ YaccOutput := $(addprefix $(patsubst %.y,%,$(YaccFiles)),.h .cpp .output)
 %.h: %.y
 
 # Rule for building the bison parsers...
-%.cpp %.h : %.y
+$(PROJ_SRC_DIR)/%.cpp $(PROJ_SRC_DIR)/%.h : $(PROJ_SRC_DIR)/%.y
 	$(Echo) "Bisoning $*.y"
-	$(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c  $<
-	$(Verb) $(MV) -f $*.tab.c $*.cpp
-	$(Verb) $(MV) -f $*.tab.h $*.h
+	$(Verb) $(BISON) -v -d -p $(<F:%Parser.y=%) -o $*.tab.c $<
+	$(Verb) $(MV) -f $*.tab.c $(PROJ_SRC_DIR)/$*.cpp
+	$(Verb) $(MV) -f $*.tab.h $(PROJ_SRC_DIR)/$*.h
+	$(Echo) "*** DON'T FORGET TO CHECK IN $*.cpp and $*.h (generated files)"
 
 clean-local::
-	-$(Verb) $(RM) -f $(YaccOutput)
 	$(Verb) $(RM) -f $(YaccOutput)
 endif
 
@@ -1347,7 +1423,7 @@ dist-check:: $(DistTarGZip)
 	  gunzip -c $(DistTarGZip) | $(TAR) xf - && \
 	  cd build && \
 	  ../$(DistName)/configure --prefix="$(DistCheckDir)/install" \
-	    --srcdir=../$(DistName) && \
+	    --srcdir=../$(DistName) $(DIST_CHECK_CONFIG_OPTIONS) && \
 	  $(MAKE) all && \
 	  $(MAKE) check && \
 	  $(MAKE) install && \
@@ -1413,9 +1489,16 @@ $(DistDir)/.makedistdir: $(DistSources)
 	  if test -d "$$from_dir/$$file"; then \
 	    if test -d "$(PROJ_SRC_DIR)/$$file" && \
 	       test "$$from_dir" != "$(PROJ_SRC_DIR)" ; then \
-	      $(CP) -pR "$(PROJ_SRC_DIR)/$$file" "$$to_dir" || exit 1; \
+	       cd $(PROJ_SRC_DIR) ; \
+	       $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+	         ( cd $$to_dir ; $(TAR) xf - ) ; \
+	       cd $(PROJ_OBJ_DIR) ; \
+	    else \
+	       cd $$from_dir ; \
+	       $(TAR) cf - $$file --exclude .svn --exclude CVS | \
+	         ( cd $$to_dir ; $(TAR) xf - ) ; \
+	       cd $(PROJ_OBJ_DIR) ; \
 	    fi; \
-	    $(CP) -pR $$from_dir/$$file $$to_dir || exit 1; \
 	  elif test -f "$$from_dir/$$file" ; then \
 	    $(CP) -p "$$from_dir/$$file" "$(DistDir)/$$file" || exit 1; \
 	  elif test -L "$$from_dir/$$file" ; then \
@@ -1436,8 +1519,8 @@ $(DistDir)/.makedistdir: $(DistSources)
 	  fi; \
 	done
 	$(Verb) if test "$(DistDir)" = "$(TopDistDir)" ; then \
-	  $(EchoCmd) Eliminating CVS directories from distribution ; \
-	  $(RM) -rf `find $(TopDistDir) -type d -name CVS -print` ;\
+	  $(EchoCmd) Eliminating CVS/.svn directories from distribution ; \
+	  $(RM) -rf `find $(TopDistDir) -type d \( -name CVS -o -name .svn \) -print` ;\
 	  $(MAKE) dist-hook ; \
 	  $(FIND) $(TopDistDir) -type d ! -perm -777 -exec chmod a+rwx {} \; \
 	    -o ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; \
@@ -1525,10 +1608,11 @@ printvars::
 	$(Echo) "TDFiles      : " '$(TDFiles)'
 	$(Echo) "INCFiles     : " '$(INCFiles)'
 	$(Echo) "INCTMPFiles  : " '$(INCTMPFiles)'
-	$(Echo) "Preconditions: " '$(Preconditions)'
+	$(Echo) "PreConditions: " '$(PreConditions)'
 	$(Echo) "Compile.CXX  : " '$(Compile.CXX)'
 	$(Echo) "Compile.C    : " '$(Compile.C)'
 	$(Echo) "Archive      : " '$(Archive)'
 	$(Echo) "YaccFiles    : " '$(YaccFiles)'
 	$(Echo) "LexFiles     : " '$(LexFiles)'
 	$(Echo) "Module       : " '$(Module)'
+	$(Echo) "FilesToConfig: " '$(FilesToConfigPATH)'