X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=arch%2Fsh%2FKconfig;h=9932d1aa8494aa656e7655b727410e9dad477357;hb=32351a28a7e1f2c68afbe559dd35e1ad0301be6d;hp=51d9d0ab39c6d635078ad221c4bd811c451f7ea0;hpb=be782df54c51b50dd4dbc363a5a5afa04565fc60;p=firefly-linux-kernel-4.4.55.git

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 51d9d0ab39c6..9932d1aa8494 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -197,12 +197,8 @@ config SH_RTS7751R2D
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
 
-config SH_R7780RP
-	bool "R7780RP-1"
-	select CPU_SUBTYPE_SH7780
-	help
-	  Select R7780RP-1 if configuring for a Renesas Solutions
-	  HIGHLANDER board.
+config SH_HIGHLANDER
+	bool "Highlander"
 
 config SH_EDOSK7705
 	bool "EDOSK7705"
@@ -262,6 +258,10 @@ config SH_UNKNOWN
 
 endchoice
 
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+
 source "arch/sh/mm/Kconfig"
 
 config CF_ENABLER
@@ -412,8 +412,9 @@ config CPU_HAS_PTEA
 
 endmenu
 
-menu "Timer support"
-depends on !GENERIC_TIME
+menu "Timer and clock configuration"
+
+if !GENERIC_TIME
 
 config SH_TMU
 	bool "TMU timer support"
@@ -436,17 +437,11 @@ config SH_MTU2
 	help
 	  This enables the use of the MTU2 as the system timer.
 
-endmenu
-
-source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
+endif
 
 config SH_TIMER_IRQ
 	int
-	default "28" if CPU_SUBTYPE_SH7780
+	default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
 	default "16"
@@ -476,7 +471,8 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7206
-	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
+	default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780 || \
+			      CPU_SUBTYPE_SH7785
 	default "60000000" if CPU_SUBTYPE_SH7751
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	help
@@ -491,6 +487,8 @@ config SH_CLK_MD
 	help
 	  MD2 - MD0 pin setting.
 
+endmenu
+
 menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
@@ -509,21 +507,6 @@ config SH_CPU_FREQ
 
 endmenu
 
-source "arch/sh/drivers/dma/Kconfig"
-
-source "arch/sh/cchips/Kconfig"
-
-config HEARTBEAT
-	bool "Heartbeat LED"
-	depends on SH_MPC1211 || SH_SH03 || \
-		   SOLUTION_ENGINE || \
-		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
-		   SH_R7780RP
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
 source "arch/sh/drivers/Kconfig"
 
 endmenu