The LLVM target-independent code generator is a framework that provides a suite of reusable components for translating the LLVM internal representation to -the machine code for a specified target -- either in assembly form (suitable for -a static compiler) or in binary machine code format (usable for a JIT compiler). -The LLVM target-independent code generator consists of five main components:
+the machine code for a specified target—either in assembly form (suitable +for a static compiler) or in binary machine code format (usable for a JIT +compiler). The LLVM target-independent code generator consists of five main +components:Important Note: For historical reasons, the LLVM SparcV9 code -generator uses almost entirely different code paths than described in this -document. For this reason, there are some deprecated interfaces (such as -TargetSchedInfo), which are only used by the -V9 backend and should not be used by any other targets. Also, all code in the -lib/Target/SparcV9 directory and subdirectories should be considered -deprecated, and should not be used as the basis for future code generator work. -The SparcV9 backend is slowly being merged into the rest of the -target-independent code generators, but this is a low-priority process with no -predictable completion date.
+LLVM machine description model: FPGAs for example.-The code generator is based on the assumption that the instruction selector will -use an optimal pattern matching selector to create high-quality sequences of +
The code generator is based on the assumption that the instruction selector +will use an optimal pattern matching selector to create high-quality sequences of native instructions. Alternative code generator designs based on pattern -expansion and -aggressive iterative peephole optimization are much slower. This design -permits efficient compilation (important for JIT environments) and +expansion and aggressive iterative peephole optimization are much slower. This +design permits efficient compilation (important for JIT environments) and aggressive optimization (used when generating code offline) by allowing components of varying levels of sophistication to be used for any step of compilation.
--In addition to these stages, target implementations can insert arbitrary +
In addition to these stages, target implementations can insert arbitrary target-specific passes into the flow. For example, the X86 target uses a special pass to handle the 80x87 floating point stack architecture. Other -targets with unusual requirements can be supported with custom passes as needed. -
+targets with unusual requirements can be supported with custom passes as +needed. @@ -272,18 +281,17 @@ In order to allow the maximum amount of commonality to be factored out, the LLVM code generator uses the TableGen tool to describe big chunks of the target machine, which allows the use of domain-specific and target-specific abstractions to reduce the amount of -repetition. - +repetition.As LLVM continues to be developed and refined, we plan to move more and more -of the target description to be in .td form. Doing so gives us a +of the target description to the .td form. Doing so gives us a number of advantages. The most important is that it makes it easier to port -LLVM, because it reduces the amount of C++ code that has to be written and the +LLVM because it reduces the amount of C++ code that has to be written, and the surface area of the code generator that needs to be understood before someone -can get in an get something working. Second, it is also important to us because -it makes it easier to change things: in particular, if tables and other things -are all emitted by tblgen, we only need to change one place (tblgen) to update -all of the targets to a new interface.
+can get something working. Second, it makes it easier to change things. In +particular, if tables and other things are all emitted by tblgen, we +only need a change in one place (tblgen) to update all of the targets +to a new interface. @@ -295,9 +303,9 @@ all of the targets to a new interface.The LLVM target description classes (which are located in the +
The LLVM target description classes (located in the include/llvm/Target directory) provide an abstract description of the -target machine; independent of any particular client. These classes are +target machine independent of any particular client. These classes are designed to capture the abstract properties of the target (such as the instructions and registers it has), and do not incorporate any particular pieces of code generation algorithms.
@@ -357,14 +365,16 @@ little-endian or big-endian.The TargetLowering class is used by SelectionDAG based instruction selectors primarily to describe how LLVM code should be lowered to SelectionDAG -operations. Among other things, this class indicates: -
Registers in the code generator are represented in the code generator by -unsigned numbers. Physical registers (those that actually exist in the target +unsigned integers. Physical registers (those that actually exist in the target description) are unique small numbers, and virtual registers are generally large. Note that register #0 is reserved as a flag value.
Each register in the processor description has an associated -TargetRegisterDesc entry, which provides a textual name for the register -(used for assembly output and debugging dumps) and a set of aliases (used to -indicate that one register overlaps with another). +TargetRegisterDesc entry, which provides a textual name for the +register (used for assembly output and debugging dumps) and a set of aliases +(used to indicate whether one register overlaps with another).
In addition to the per-register description, the MRegisterInfo class @@ -417,7 +427,8 @@ href="TableGenFundamentals.html">TableGen description of the register file. instruction the target supports. Descriptors define things like the mnemonic for the opcode, the number of operands, the list of implicit register uses and defs, whether the instruction has certain target-independent properties - (accesses memory, is commutable, etc), and holds any target-specific flags.
+ (accesses memory, is commutable, etc), and holds any target-specific + flags. @@ -429,7 +440,7 @@ href="TableGenFundamentals.html">TableGen description of the register file.The TargetFrameInfo class is used to provide information about the stack frame layout of the target. It holds the direction of stack growth, the known stack alignment on entry to each function, and the offset to the - locals area. The offset to the local area is the offset from the stack + local area. The offset to the local area is the offset from the stack pointer on function entry to the first location where function data (local variables, spill locations) can be stored.
@@ -440,9 +451,11 @@ href="TableGenFundamentals.html">TableGen description of the register file.- TODO -
+The TargetSubtarget class is used to provide information about the + specific chip set being targeted. A sub-target informs code generation of + which instructions are supported, instruction latencies and instruction + execution itinerary; i.e., which processing units are used, in what order, and + for how long.
The TargetJITInfo class exposes an abstract interface used by the + Just-In-Time code generator to perform target-specific activities, such as + emitting stubs. If a TargetMachine supports JIT code generation, it + should provide one of these objects through the getJITInfo + method.
+-At the high-level, LLVM code is translated to a machine specific representation -formed out of MachineFunction, -MachineBasicBlock, and At the high-level, LLVM code is translated to a machine specific +representation formed out of +MachineFunction, +MachineBasicBlock, and MachineInstr instances -(defined in include/llvm/CodeGen). This representation is completely target -agnostic, representing instructions in their most abstract form: an opcode and a -series of operands. This representation is designed to support both SSA -representation for machine code, as well as a register allocated, non-SSA form. -
+(defined in include/llvm/CodeGen). This representation is completely +target agnostic, representing instructions in their most abstract form: an +opcode and a series of operands. This representation is designed to support +both an SSA representation for machine code, as well as a register allocated, +non-SSA form.The opcode number is a simple unsigned number that only has meaning to a +
The opcode number is a simple unsigned integer that only has meaning to a specific backend. All of the instructions for a target should be defined in the *InstrInfo.td file for the target. The opcode enum values are auto-generated from this description. The MachineInstr class does not have any information about how to interpret the instruction (i.e., what the -semantics of the instruction are): for that you must refer to the +semantics of the instruction are); for that you must refer to the TargetInstrInfo class.
The operands of a machine instruction can be of several different types: -they can be a register reference, constant integer, basic block reference, etc. -In addition, a machine operand should be marked as a def or a use of the value +a register reference, a constant integer, a basic block reference, etc. In +addition, a machine operand should be marked as a def or a use of the value (though only registers are allowed to be defs).
By convention, the LLVM code generator orders instruction operands so that @@ -509,11 +530,13 @@ first.
list has several advantages. In particular, the debugging printer will print the instruction like this: +- %r3 = add %i1, %i2 +%r3 = add %i1, %i2+
If the first operand is a def, and it is also easier to Also if the first operand is a def, it is easier to create instructions whose only def is the first operand.
@@ -529,39 +552,44 @@ operand.Machine instructions are created by using the BuildMI functions, located in the include/llvm/CodeGen/MachineInstrBuilder.h file. The BuildMI functions make it easy to build arbitrary machine -instructions. Usage of the BuildMI functions look like this: -
+instructions. Usage of the BuildMI functions look like this: +- // Create a 'DestReg = mov 42' (rendered in X86 assembly as 'mov DestReg, 42') - // instruction. The '1' specifies how many operands will be added. - MachineInstr *MI = BuildMI(X86::MOV32ri, 1, DestReg).addImm(42); +// Create a 'DestReg = mov 42' (rendered in X86 assembly as 'mov DestReg, 42') +// instruction. The '1' specifies how many operands will be added. +MachineInstr *MI = BuildMI(X86::MOV32ri, 1, DestReg).addImm(42); - // Create the same instr, but insert it at the end of a basic block. - MachineBasicBlock &MBB = ... - BuildMI(MBB, X86::MOV32ri, 1, DestReg).addImm(42); +// Create the same instr, but insert it at the end of a basic block. +MachineBasicBlock &MBB = ... +BuildMI(MBB, X86::MOV32ri, 1, DestReg).addImm(42); - // Create the same instr, but insert it before a specified iterator point. - MachineBasicBlock::iterator MBBI = ... - BuildMI(MBB, MBBI, X86::MOV32ri, 1, DestReg).addImm(42); +// Create the same instr, but insert it before a specified iterator point. +MachineBasicBlock::iterator MBBI = ... +BuildMI(MBB, MBBI, X86::MOV32ri, 1, DestReg).addImm(42); - // Create a 'cmp Reg, 0' instruction, no destination reg. - MI = BuildMI(X86::CMP32ri, 2).addReg(Reg).addImm(0); - // Create an 'sahf' instruction which takes no operands and stores nothing. - MI = BuildMI(X86::SAHF, 0); +// Create a 'cmp Reg, 0' instruction, no destination reg. +MI = BuildMI(X86::CMP32ri, 2).addReg(Reg).addImm(0); +// Create an 'sahf' instruction which takes no operands and stores nothing. +MI = BuildMI(X86::SAHF, 0); - // Create a self looping branch instruction. - BuildMI(MBB, X86::JNE, 1).addMBB(&MBB); +// Create a self looping branch instruction. +BuildMI(MBB, X86::JNE, 1).addMBB(&MBB);+
-The key thing to remember with the BuildMI functions is that you have -to specify the number of operands that the machine instruction will take. This -allows for efficient memory allocation. You also need to specify if operands -default to be uses of values, not definitions. If you need to add a definition -operand (other than the optional destination register), you must explicitly -mark it as such. -
+The key thing to remember with the BuildMI functions is that you +have to specify the number of operands that the machine instruction will take. +This allows for efficient memory allocation. You also need to specify if +operands default to be uses of values, not definitions. If you need to add a +definition operand (other than the optional destination register), you must +explicitly mark it as such:
+ ++MI.addReg(Reg, MachineOperand::Def); ++
For example, consider this simple LLVM example:
+
- int %test(int %X, int %Y) {
- %Z = div int %X, %Y
- ret int %Z
- }
+int %test(int %X, int %Y) {
+ %Z = div int %X, %Y
+ ret int %Z
+}
+The X86 instruction selector produces this machine code for the div -and ret (use +
The X86 instruction selector produces this machine code for the div +and ret (use "llc X.bc -march=x86 -print-machineinstrs" to get this):
+- ;; Start of div - %EAX = mov %reg1024 ;; Copy X (in reg1024) into EAX - %reg1027 = sar %reg1024, 31 - %EDX = mov %reg1027 ;; Sign extend X into EDX - idiv %reg1025 ;; Divide by Y (in reg1025) - %reg1026 = mov %EAX ;; Read the result (Z) out of EAX - - ;; Start of ret - %EAX = mov %reg1026 ;; 32-bit return value goes in EAX - ret +;; Start of div +%EAX = mov %reg1024 ;; Copy X (in reg1024) into EAX +%reg1027 = sar %reg1024, 31 +%EDX = mov %reg1027 ;; Sign extend X into EDX +idiv %reg1025 ;; Divide by Y (in reg1025) +%reg1026 = mov %EAX ;; Read the result (Z) out of EAX + +;; Start of ret +%EAX = mov %reg1026 ;; 32-bit return value goes in EAX +ret+
By the end of code generation, the register allocator has coalesced -the registers and deleted the resultant identity moves, producing the +the registers and deleted the resultant identity moves producing the following code:
+- ;; X is in EAX, Y is in ECX - mov %EAX, %EDX - sar %EDX, 31 - idiv %ECX - ret +;; X is in EAX, Y is in ECX +mov %EAX, %EDX +sar %EDX, 31 +idiv %ECX +ret+
This approach is extremely general (if it can handle the X86 architecture, it can handle anything!) and allows all of the target specific knowledge about the instruction stream to be isolated in the instruction selector. Note that physical registers should have a short lifetime for good -code generation, and all physical registers are assumed dead on entry and -exit of basic blocks (before register allocation). Thus if you need a value +code generation, and all physical registers are assumed dead on entry to and +exit from basic blocks (before register allocation). Thus, if you need a value to be live across basic block boundaries, it must live in a virtual register.
@@ -632,18 +666,18 @@ register.MachineInstr's are initially selected in SSA-form, and are maintained in SSA-form until register allocation happens. For the most -part, this is trivially simple since LLVM is already in SSA form: LLVM PHI nodes +part, this is trivially simple since LLVM is already in SSA form; LLVM PHI nodes become machine code PHI nodes, and virtual registers are only allowed to have a single definition.
-After register allocation, machine code is no longer in SSA-form, as there +
After register allocation, machine code is no longer in SSA-form because there are no virtual registers left in the code.
The MachineBasicBlock class contains a list of machine instructions -(MachineInstr instances). It roughly corresponds to -the LLVM code input to the instruction selector, but there can be a one-to-many -mapping (i.e. one LLVM basic block can map to multiple machine basic blocks). -The MachineBasicBlock class has a "getBasicBlock" method, which returns -the LLVM basic block that it comes from. -
+(MachineInstr instances). It roughly +corresponds to the LLVM code input to the instruction selector, but there can be +a one-to-many mapping (i.e. one LLVM basic block can map to multiple machine +basic blocks). The MachineBasicBlock class has a +"getBasicBlock" method, which returns the LLVM basic block that it +comes from.The MachineFunction class contains a list of machine basic blocks -(MachineBasicBlock instances). It corresponds -one-to-one with the LLVM function input to the instruction selector. In -addition to a list of basic blocks, the MachineFunction contains a -the MachineConstantPool, MachineFrameInfo, MachineFunctionInfo, -SSARegMap, and a set of live in and live out registers for the function. See -MachineFunction.h for more information. -
+(MachineBasicBlock instances). It +corresponds one-to-one with the LLVM function input to the instruction selector. +In addition to a list of basic blocks, the MachineFunction contains a +a MachineConstantPool, a MachineFrameInfo, a +MachineFunctionInfo, a SSARegMap, and a set of live in and +live out registers for the function. See +include/llvm/CodeGen/MachineFunction.h for more information.Portions of the DAG instruction selector are generated from the target -description files (*.td) files. Eventually, we aim for the entire -instruction selector to be generated from these .td files.
+description (*.td) files. Our goal is for the entire instruction +selector to be generated from these .td files.-The SelectionDAG provides an abstraction for code representation in a way that -is amenable to instruction selection using automatic techniques -(e.g. dynamic-programming based optimal pattern matching selectors), It is also -well suited to other phases of code generation; in particular, +
The SelectionDAG provides an abstraction for code representation in a way +that is amenable to instruction selection using automatic techniques +(e.g. dynamic-programming based optimal pattern matching selectors). It is also +well-suited to other phases of code generation; in particular, instruction scheduling (SelectionDAG's are very close to scheduling DAGs post-selection). Additionally, the SelectionDAG provides a host representation where a large variety of very-low-level (but target-independent) optimizations may be -performed: ones which require extensive information about the instructions -efficiently supported by the target. -
+performed; ones which require extensive information about the instructions +efficiently supported by the target. --The SelectionDAG is a Directed-Acyclic-Graph whose nodes are instances of the +
The SelectionDAG is a Directed-Acyclic-Graph whose nodes are instances of the SDNode class. The primary payload of the SDNode is its operation code (Opcode) that indicates what operation the node performs and the operands to the operation. @@ -754,38 +783,33 @@ both the dividend and the remainder. Many other situations require multiple values as well. Each node also has some number of operands, which are edges to the node defining the used value. Because nodes may define multiple values, edges are represented by instances of the SDOperand class, which is -a <SDNode, unsigned> pair, indicating the node and result -value being used, respectively. Each value produced by an SDNode has an -associated MVT::ValueType, indicating what type the value is. -
- --SelectionDAGs contain two different kinds of values: those that represent data -flow and those that represent control flow dependencies. Data values are simple -edges with an integer or floating point value type. Control edges are -represented as "chain" edges which are of type MVT::Other. These edges provide -an ordering between nodes that have side effects (such as -loads/stores/calls/return/etc). All nodes that have side effects should take a -token chain as input and produce a new one as output. By convention, token -chain inputs are always operand #0, and chain results are always the last +a <SDNode, unsigned> pair, indicating the node and result +value being used, respectively. Each value produced by an SDNode has +an associated MVT::ValueType indicating what type the value is.
+ +SelectionDAGs contain two different kinds of values: those that represent +data flow and those that represent control flow dependencies. Data values are +simple edges with an integer or floating point value type. Control edges are +represented as "chain" edges which are of type MVT::Other. These edges +provide an ordering between nodes that have side effects (such as +loads, stores, calls, returns, etc). All nodes that have side effects should +take a token chain as input and produce a new one as output. By convention, +token chain inputs are always operand #0, and chain results are always the last value produced by an operation.
--A SelectionDAG has designated "Entry" and "Root" nodes. The Entry node is -always a marker node with an Opcode of ISD::EntryToken. The Root node is the -final side-effecting node in the token chain. For example, in a single basic -block function, this would be the return node. -
+A SelectionDAG has designated "Entry" and "Root" nodes. The Entry node is +always a marker node with an Opcode of ISD::EntryToken. The Root node +is the final side-effecting node in the token chain. For example, in a single +basic block function it would be the return node.
+ +One important concept for SelectionDAGs is the notion of a "legal" vs. +"illegal" DAG. A legal DAG for a target is one that only uses supported +operations and supported types. On a 32-bit PowerPC, for example, a DAG with +a value of type i1, i8, i16, or i64 would be illegal, as would a DAG that uses a +SREM or UREM operation. The +legalize phase is responsible for turning +an illegal DAG into a legal DAG.
--One important concept for SelectionDAGs is the notion of a "legal" vs. "illegal" -DAG. A legal DAG for a target is one that only uses supported operations and -supported types. On a 32-bit PowerPC, for example, a DAG with any values of i1, -i8, i16, -or i64 type would be illegal, as would a DAG that uses a SREM or UREM operation. -The legalize -phase is responsible for turning an illegal DAG into a legal DAG. -
-SelectionDAG-based instruction selection consists of the following steps: -
+SelectionDAG-based instruction selection consists of the following steps:
After all of these steps are complete, the SelectionDAG is destroyed and the rest of the code generation passes are run.
+One great way to visualize what is going on here is to take advantage of a +few LLC command line options. In particular, the -view-isel-dags +option pops up a window with the SelectionDAG input to the Select phase for all +of the code compiled (if you only get errors printed to the console while using +this, you probably need to configure +your system to add support for it). The -view-sched-dags option +views the SelectionDAG output from the Select phase and input to the Scheduler +phase.
+-The initial SelectionDAG is naively peephole expanded from the LLVM input by -the SelectionDAGLowering class in the SelectionDAGISel.cpp file. The -intent of this pass is to expose as much low-level, target-specific details -to the SelectionDAG as possible. This pass is mostly hard-coded (e.g. an LLVM -add turns into an SDNode add while a geteelementptr is expanded into the obvious -arithmetic). This pass requires target-specific hooks to lower calls and -returns, varargs, etc. For these features, the TargetLowering interface is -used. -
+The initial SelectionDAG is naïvely peephole expanded from the LLVM +input by the SelectionDAGLowering class in the +lib/CodeGen/SelectionDAG/SelectionDAGISel.cpp file. The intent of this +pass is to expose as much low-level, target-specific details to the SelectionDAG +as possible. This pass is mostly hard-coded (e.g. an LLVM add turns +into an SDNode add while a geteelementptr is expanded into the +obvious arithmetic). This pass requires target-specific hooks to lower calls, +returns, varargs, etc. For these features, the +TargetLowering interface is used.
A target implementation tells the legalizer which types are supported (and which register class to use for them) by calling the - "addRegisterClass" method in its TargetLowering constructor.
+ addRegisterClass method in its TargetLowering constructor.Eliminate operations that are not supported by the target.
Targets often have weird constraints, such as not supporting every operation on every supported datatype (e.g. X86 does not support byte conditional moves and PowerPC does not support sign-extending loads from - a 16-bit memory location). Legalize takes care by open-coding + a 16-bit memory location). Legalize takes care of this by open-coding another sequence of operations to emulate the operation ("expansion"), by - promoting to a larger type that supports the operation - (promotion), or using a target-specific hook to implement the - legalization (custom).
+ promoting one type to a larger type that supports the operation + ("promotion"), or by using a target-specific hook to implement the + legalization ("custom").A target implementation tells the legalizer which operations are not supported (and which of the above three actions to take) by calling the - "setOperationAction" method in its TargetLowering constructor.
+ setOperationAction method in its TargetLowering + constructor.-Prior to the existance of the Legalize pass, we required that every -target selector supported and handled every +
Prior to the existance of the Legalize pass, we required that every target +selector supported and handled every operator and type even if they are not natively supported. The introduction of -the Legalize phase allows all of the -cannonicalization patterns to be shared across targets, and makes it very -easy to optimize the cannonicalized code because it is still in the form of -a DAG. -
+the Legalize phase allows all of the cannonicalization patterns to be shared +across targets, and makes it very easy to optimize the cannonicalized code +because it is still in the form of a DAG. @@ -913,27 +939,24 @@ a DAG.-The SelectionDAG optimization phase is run twice for code generation: once +
The SelectionDAG optimization phase is run twice for code generation: once immediately after the DAG is built and once after legalization. The first run of the pass allows the initial code to be cleaned up (e.g. performing optimizations that depend on knowing that the operators have restricted type inputs). The second run of the pass cleans up the messy code generated by the Legalize pass, which allows Legalize to be very simple (it can focus on making -code legal instead of focusing on generating good and legal code). -
+code legal instead of focusing on generating good and legal code). --One important class of optimizations performed is optimizing inserted sign and -zero extension instructions. We currently use ad-hoc techniques, but could move -to more rigorous techniques in the future. Here are some good -papers on the subject:
+One important class of optimizations performed is optimizing inserted sign +and zero extension instructions. We currently use ad-hoc techniques, but could +move to more rigorous techniques in the future. Here are some good papers on +the subject:
-"Widening
-integer arithmetic"
-Kevin Redwine and Norman Ramsey
-International Conference on Compiler Construction (CC) 2004
+ "Widening
+ integer arithmetic"
+ Kevin Redwine and Norman Ramsey
+ International Conference on Compiler Construction (CC) 2004
The Select phase is the bulk of the target-specific code for instruction -selection. This phase takes a legal SelectionDAG as input, -pattern matches the instructions supported by the target to this DAG, and -produces a new DAG of target code. For example, consider the following LLVM -fragment:
+selection. This phase takes a legal SelectionDAG as input, pattern matches the +instructions supported by the target to this DAG, and produces a new DAG of +target code. For example, consider the following LLVM fragment: +- %t1 = add float %W, %X - %t2 = mul float %t1, %Y - %t3 = add float %t2, %Z +%t1 = add float %W, %X +%t2 = mul float %t1, %Y +%t3 = add float %t2, %Z+
This LLVM code corresponds to a SelectionDAG that looks basically like this: -
+This LLVM code corresponds to a SelectionDAG that looks basically like +this:
+- (fadd:f32 (fmul:f32 (fadd:f32 W, X), Y), Z) +(fadd:f32 (fmul:f32 (fadd:f32 W, X), Y), Z)+
If a target supports floating pointer multiple-and-add (FMA) operations, one +
If a target supports floating point multiply-and-add (FMA) operations, one of the adds can be merged with the multiply. On the PowerPC, for example, the output of the instruction selector might look like this DAG:
+- (FMADDS (FADDS W, X), Y, Z) +(FMADDS (FADDS W, X), Y, Z)+
-The FMADDS instruction is a ternary instruction that multiplies its first two -operands and adds the third (as single-precision floating-point numbers). The -FADDS instruction is a simple binary single-precision add instruction. To -perform this pattern match, the PowerPC backend includes the following -instruction definitions: -
+The FMADDS instruction is a ternary instruction that multiplies its +first two operands and adds the third (as single-precision floating-point +numbers). The FADDS instruction is a simple binary single-precision +add instruction. To perform this pattern match, the PowerPC backend includes +the following instruction definitions:
+
def FMADDS : AForm_1<59, 29,
(ops F4RC:$FRT, F4RC:$FRA, F4RC:$FRC, F4RC:$FRB),
@@ -1000,6 +1027,7 @@ def FADDS : AForm_2<59, 21,
"fadds $FRT, $FRA, $FRB",
[(set F4RC:$FRT, (fadd F4RC:$FRA, F4RC:$FRB))]>;
+The portion of the instruction definition in bold indicates the pattern used to match the instruction. The DAG operators (like fmul/fadd) @@ -1007,77 +1035,81 @@ are defined in the lib/Target/TargetSelectionDAG.td file. "F4RC" is the register class of the input and result values.
The TableGen DAG instruction selector generator reads the instruction -patterns in the .td and automatically builds parts of the pattern matching code -for your target. It has the following strengths:
+patterns in the .td file and automatically builds parts of the pattern +matching code for your target. It has the following strengths:
- // Arbitrary immediate support. Implement in terms of LIS/ORI.
- def : Pat<(i32 imm:$imm),
- (ORI (LIS (HI16 imm:$imm)), (LO16 imm:$imm))>;
+// Arbitrary immediate support. Implement in terms of LIS/ORI.
+def : Pat<(i32 imm:$imm),
+ (ORI (LIS (HI16 imm:$imm)), (LO16 imm:$imm))>;
-
+ -While it has many strengths, the system currently has some limitations, -primarily because it is a work in progress and is not yet finished: -
+While it has many strengths, the system currently has some limitations, +primarily because it is a work in progress and is not yet finished:
Despite these limitations, the instruction selector generator is still quite useful for most of the binary and logical operations in typical instruction @@ -1097,9 +1129,12 @@ please let Chris know!
phase and assigns an order. The scheduler can pick an order depending on various constraints of the machines (i.e. order for minimal register pressure or try to cover instruction latencies). Once an order is established, the DAG is -converted to a list of MachineInstrs and the -Selection DAG is destroyed. - +converted to a list of MachineInstrs and +the SelectionDAG is destroyed. + +Note that this phase is logically separate from the instruction selection +phase, but is tied to it closely in the code because it operates on +SelectionDAGs.
To Be Written
Live Intervals are the ranges (intervals) where a variable is live. +They are used by some register allocator passes to +determine if two or more virtual registers which require the same physical +register are live at the same point in the program (i.e., they conflict). When +this situation occurs, one virtual register must be spilled.
+ +The first step in determining the live intervals of variables is to +calculate the set of registers that are immediately dead after the +instruction (i.e., the instruction calculates the value, but it is +never used) and the set of registers that are used by the instruction, +but are never used after the instruction (i.e., they are killed). Live +variable information is computed for each virtual register and +register allocatable physical register in the function. This +is done in a very efficient manner because it uses SSA to sparsely +compute lifetime information for virtual registers (which are in SSA +form) and only has to track physical registers within a block. Before +register allocation, LLVM can assume that physical registers are only +live within a single basic block. This allows it to do a single, +local analysis to resolve physical register lifetimes within each +basic block. If a physical register is not register allocatable (e.g., +a stack pointer or condition codes), it is not tracked.
+ +Physical registers may be live in to or out of a function. Live in values +are typically arguments in registers. Live out values are typically return +values in registers. Live in values are marked as such, and are given a dummy +"defining" instruction during live intervals analysis. If the last basic block +of a function is a return, then it's marked as using all live out +values in the function.
+ +PHI nodes need to be handled specially, because the calculation +of the live variable information from a depth first traversal of the CFG of +the function won't guarantee that a virtual register used by the PHI +node is defined before it's used. When a PHI node is encounted, only +the definition is handled, because the uses will be handled in other basic +blocks.
+ +For each PHI node of the current basic block, we simulate an +assignment at the end of the current basic block and traverse the successor +basic blocks. If a successor basic block has a PHI node and one of +the PHI node's operands is coming from the current basic block, +then the variable is marked as alive within the current basic block +and all of its predecessor basic blocks, until the basic block with the +defining instruction is encountered.
+ +We now have the information available to perform the live intervals analysis +and build the live intervals themselves. We start off by numbering the basic +blocks and machine instructions. We then handle the "live-in" values. These +are in physical registers, so the physical register is assumed to be killed by +the end of the basic block. Live intervals for virtual registers are computed +for some ordering of the machine instructions [1, N]. A live interval +is an interval [i, j), where 1 <= i <= j < N, for which a +variable is live.
+ +More to come...
+ + + +To Be Written
The Register Allocation problem consists in mapping a program +Pv, that can use an unbounded number of virtual +registers, to a program Pp that contains a finite +(possibly small) number of physical registers. Each target architecture has +a different number of physical registers. If the number of physical +registers is not enough to accommodate all the virtual registers, some of +them will have to be mapped into memory. These virtuals are called +spilled virtuals.
+ +In LLVM, physical registers are denoted by integer numbers that +normally range from 1 to 1023. To see how this numbering is defined +for a particular architecture, you can read the +GenRegisterNames.inc file for that architecture. For +instance, by inspecting +lib/Target/X86/X86GenRegisterNames.inc we see that the 32-bit +register EAX is denoted by 15, and the MMX register +MM0 is mapped to 48.
+ +Some architectures contain registers that share the same physical +location. A notable example is the X86 platform. For instance, in the +X86 architecture, the registers EAX, AX and +AL share the first eight bits. These physical registers are +marked as aliased in LLVM. Given a particular architecture, you +can check which registers are aliased by inspecting its +RegisterInfo.td file. Moreover, the method +MRegisterInfo::getAliasSet(p_reg) returns an array containing +all the physical registers aliased to the register p_reg.
+ +Physical registers, in LLVM, are grouped in Register Classes. +Elements in the same register class are functionally equivalent, and can +be interchangeably used. Each virtual register can only be mapped to +physical registers of a particular class. For instance, in the X86 +architecture, some virtuals can only be allocated to 8 bit registers. +A register class is described by TargetRegisterClass objects. +To discover if a virtual register is compatible with a given physical, +this code can be used: +
+ +
+bool RegMapping_Fer::compatible_class(MachineFunction &mf,
+ unsigned v_reg,
+ unsigned p_reg) {
+ assert(MRegisterInfo::isPhysicalRegister(p_reg) &&
+ "Target register must be physical");
+ const TargetRegisterClass *trc = mf.getSSARegMap()->getRegClass(v_reg);
+ return trc->contains(p_reg);
+}
+
+Sometimes, mostly for debugging purposes, it is useful to change +the number of physical registers available in the target +architecture. This must be done statically, inside the +TargetRegsterInfo.td file. Just grep for +RegisterClass, the last parameter of which is a list of +registers. Just commenting some out is one simple way to avoid them +being used. A more polite way is to explicitly exclude some registers +from the allocation order. See the definition of the +GR register class in +lib/Target/IA64/IA64RegisterInfo.td for an example of this +(e.g., numReservedRegs registers are hidden.)
+ +Virtual registers are also denoted by integer numbers. Contrary to +physical registers, different virtual registers never share the same +number. The smallest virtual register is normally assigned the number +1024. This may change, so, in order to know which is the first virtual +register, you should access +MRegisterInfo::FirstVirtualRegister. Any register whose +number is greater than or equal to +MRegisterInfo::FirstVirtualRegister is considered a virtual +register. Whereas physical registers are statically defined in a +TargetRegisterInfo.td file and cannot be created by the +application developer, that is not the case with virtual registers. +In order to create new virtual registers, use the method +SSARegMap::createVirtualRegister(). This method will return a +virtual register with the highest code. +
+ +Before register allocation, the operands of an instruction are +mostly virtual registers, although physical registers may also be +used. In order to check if a given machine operand is a register, use +the boolean function MachineOperand::isRegister(). To obtain +the integer code of a register, use +MachineOperand::getReg(). An instruction may define or use a +register. For instance, ADD reg:1026 := reg:1025 reg:1024 +defines the registers 1024, and uses registers 1025 and 1026. Given a +register operand, the method MachineOperand::isUse() informs +if that register is being used by the instruction. The method +MachineOperand::isDef() informs if that registers is being +defined.
+ +We will call physical registers present in the LLVM bytecode before +register allocation pre-colored registers. Pre-colored +registers are used in many different situations, for instance, to pass +parameters of functions calls, and to store results of particular +instructions. There are two types of pre-colored registers: the ones +implicitly defined, and those explicitly +defined. Explicitly defined registers are normal operands, and can be +accessed with MachineInstr::getOperand(int)::getReg(). In +order to check which registers are implicitly defined by an +instruction, use the +TargetInstrInfo::get(opcode)::ImplicitDefs, where +opcode is the opcode of the target instruction. One important +difference between explicit and implicit physical registers is that +the latter are defined statically for each instruction, whereas the +former may vary depending on the program being compiled. For example, +an instruction that represents a function call will always implicitly +define or use the same set of physical registers. To read the +registers implicitly used by an instruction, use +TargetInstrInfo::get(opcode)::ImplicitUses. Pre-colored +registers impose constraints on any register allocation algorithm. The +register allocator must make sure that none of them is been +overwritten by the values of virtual registers while still alive.
+ +There are two ways to map virtual registers to physical registers (or to +memory slots). The first way, that we will call direct mapping, +is based on the use of methods of the classes MRegisterInfo, +and MachineOperand. The second way, that we will call +indirect mapping, relies on the VirtRegMap class in +order to insert loads and stores sending and getting values to and from +memory.
+ +The direct mapping provides more flexibility to the developer of +the register allocator; however, it is more error prone, and demands +more implementation work. Basically, the programmer will have to +specify where load and store instructions should be inserted in the +target function being compiled in order to get and store values in +memory. To assign a physical register to a virtual register present in +a given operand, use MachineOperand::setReg(p_reg). To insert +a store instruction, use +MRegisterInfo::storeRegToStackSlot(...), and to insert a load +instruction, use MRegisterInfo::loadRegFromStackSlot.
+ +The indirect mapping shields the application developer from the +complexities of inserting load and store instructions. In order to map +a virtual register to a physical one, use +VirtRegMap::assignVirt2Phys(vreg, preg). In order to map a +certain virtual register to memory, use +VirtRegMap::assignVirt2StackSlot(vreg). This method will +return the stack slot where vreg's value will be located. If +it is necessary to map another virtual register to the same stack +slot, use VirtRegMap::assignVirt2StackSlot(vreg, +stack_location). One important point to consider when using the +indirect mapping, is that even if a virtual register is mapped to +memory, it still needs to be mapped to a physical register. This +physical register is the location where the virtual register is +supposed to be found before being stored or after being reloaded.
+ +If the indirect strategy is used, after all the virtual registers +have been mapped to physical registers or stack slots, it is necessary +to use a spiller object to place load and store instructions in the +code. Every virtual that has been mapped to a stack slot will be +stored to memory after been defined and will be loaded before being +used. The implementation of the spiller tries to recycle load/store +instructions, avoiding unnecessary instructions. For an example of how +to invoke the spiller, see +RegAllocLinearScan::runOnMachineFunction in +lib/CodeGen/RegAllocLinearScan.cpp.
+ +With very rare exceptions (e.g., function calls), the LLVM machine +code instructions are three address instructions. That is, each +instruction is expected to define at most one register, and to use at +most two registers. However, some architectures use two address +instructions. In this case, the defined register is also one of the +used register. For instance, an instruction such as ADD %EAX, +%EBX, in X86 is actually equivalent to %EAX = %EAX + +%EBX.
+ +In order to produce correct code, LLVM must convert three address +instructions that represent two address instructions into true two +address instructions. LLVM provides the pass +TwoAddressInstructionPass for this specific purpose. It must +be run before register allocation takes place. After its execution, +the resulting code may no longer be in SSA form. This happens, for +instance, in situations where an instruction such as %a = ADD %b +%c is converted to two instructions such as:
+ ++%a = MOVE %b +%a = ADD %a %b ++
Notice that, internally, the second instruction is represented as +ADD %a[def/use] %b. I.e., the register operand %a is +both used and defined by the instruction.
+ +An important transformation that happens during register allocation is called +the SSA Deconstruction Phase. The SSA form simplifies many +analyses that are performed on the control flow graph of +programs. However, traditional instruction sets do not implement +PHI instructions. Thus, in order to generate executable code, compilers +must replace PHI instructions with other instructions that preserve their +semantics.
+ +There are many ways in which PHI instructions can safely be removed +from the target code. The most traditional PHI deconstruction +algorithm replaces PHI instructions with copy instructions. That is +the strategy adopted by LLVM. The SSA deconstruction algorithm is +implemented in nlib/CodeGen/>PHIElimination.cpp. In order to +invoke this pass, the identifier PHIEliminationID must be +marked as required in the code of the register allocator.
+ +Instruction folding is an optimization performed during +register allocation that removes unnecessary copy instructions. For +instance, a sequence of instructions such as:
+ ++%EBX = LOAD %mem_address +%EAX = COPY %EBX ++
can be safely substituted by the single instruction: + +
+%EAX = LOAD %mem_address ++
Instructions can be folded with the +MRegisterInfo::foldMemoryOperand(...) method. Care must be +taken when folding instructions; a folded instruction can be quite +different from the original instruction. See +LiveIntervals::addIntervalsForSpills in +lib/CodeGen/LiveIntervalAnalysis.cpp for an example of its use.
+ +The LLVM infrastructure provides the application developer with +three different register allocators:
+ +The type of register allocator used in llc can be chosen with the +command line option -regalloc=...:
+ ++$ llc -f -regalloc=simple file.bc -o sp.s; +$ llc -f -regalloc=local file.bc -o lc.s; +$ llc -f -regalloc=linearscan file.bc -o ln.s; ++
To Be Written
To Be Written
For the JIT or .o file writer
+For the JIT or .o file writer
-The X86 code generator lives in the lib/Target/X86 directory. This +
The X86 code generator lives in the lib/Target/X86 directory. This code generator currently targets a generic P6-like processor. As such, it produces a few P6-and-above instructions (like conditional moves), but it does not make use of newer features like MMX or SSE. In the future, the X86 backend @@ -1201,22 +1637,41 @@ implementations.
-The following are the known target triples that are supported by the X86 -backend. This is not an exhaustive list, but it would be useful to add those -that people test. -
+ +The following are the known target triples that are supported by the X86 +backend. This is not an exhaustive list, and it would be useful to add those +that people test.
The folowing target-specific calling conventions are known to backend:
+ +- Base+[1,2,4,8]*IndexReg+Disp32 +Base + [1,2,4,8] * IndexReg + Disp32+
In order to represent this, LLVM tracks no less than 4 operands for each -memory operand of this form. This means that the "load" form of 'mov' has the -following MachineOperands in this order:
+memory operand of this form. This means that the "load" form of 'mov' +has the following MachineOperands in this order:Index: 0 | 1 2 3 4 @@ -1243,7 +1700,7 @@ OperandTy: VirtReg, | VirtReg, UnsImm, VirtReg, SignExtImm
Stores, and all other instructions, treat the four memory operands in the -same way, in the same order.
+same way and in the same order.-An instruction name consists of the base name, a default operand size, and a +
An instruction name consists of the base name, a default operand size, and a a character per operand with an optional special size. For example:
@@ -1276,7 +1732,7 @@ a character per operand with an optional special size. For example:
src="http://www.w3.org/Icons/valid-html401" alt="Valid HTML 4.01!" /> Chris Lattner