X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=drivers%2Fmmc%2Fhost%2Fatmel-mci.c;h=a7ee5027146528aafc6b18fa8c2e55f32e32a174;hb=7e8ba228d9f43a4e4b3ed0e6aa3399e8f30d7bc1;hp=fa8cae1d7005c03524681564a38c1a7d5bb6a12b;hpb=e80ca144ea902efa7aed446780fd9fad421fd8d3;p=firefly-linux-kernel-4.4.55.git diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index fa8cae1d7005..a7ee50271465 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -39,7 +40,7 @@ #include "atmel-mci-regs.h" -#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) +#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) #define ATMCI_DMA_THRESHOLD 16 enum { @@ -58,18 +59,35 @@ enum atmel_mci_state { STATE_DATA_ERROR, }; +enum atmci_xfer_dir { + XFER_RECEIVE = 0, + XFER_TRANSMIT, +}; + +enum atmci_pdc_buf { + PDC_FIRST_BUF = 0, + PDC_SECOND_BUF, +}; + +struct atmel_mci_caps { + bool has_dma; + bool has_pdc; + bool has_cfg_reg; + bool has_cstor_reg; + bool has_highspeed; + bool has_rwproof; +}; + struct atmel_mci_dma { -#ifdef CONFIG_MMC_ATMELMCI_DMA struct dma_chan *chan; struct dma_async_tx_descriptor *data_desc; -#endif }; /** * struct atmel_mci - MMC controller state shared between all slots * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. - * @sg: Scatterlist entry currently being processed by PIO code, if any. + * @sg: Scatterlist entry currently being processed by PIO or PDC code. * @pio_offset: Offset into the current scatterlist entry. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, @@ -77,6 +95,7 @@ struct atmel_mci_dma { * @cmd: The command currently being sent to the card, or NULL. * @data: The data currently being transferred, or NULL if no data * transfer is in progress. + * @data_size: just data->blocks * data->blksz. * @dma: DMA client state. * @data_chan: DMA channel being used for the current data transfer. * @cmd_status: Snapshot of SR taken upon completion of the current @@ -103,6 +122,13 @@ struct atmel_mci_dma { * @mck: The peripheral bus clock hooked up to the MMC controller. * @pdev: Platform device associated with the MMC controller. * @slot: Slots sharing this MMC controller. + * @caps: MCI capabilities depending on MCI version. + * @prepare_data: function to setup MCI before data transfer which + * depends on MCI capabilities. + * @submit_data: function to start data transfer which depends on MCI + * capabilities. + * @stop_transfer: function to stop data transfer which depends on MCI + * capabilities. * * Locking * ======= @@ -143,6 +169,7 @@ struct atmel_mci { struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; + unsigned int data_size; struct atmel_mci_dma dma; struct dma_chan *data_chan; @@ -166,7 +193,13 @@ struct atmel_mci { struct clk *mck; struct platform_device *pdev; - struct atmel_mci_slot *slot[ATMEL_MCI_MAX_NR_SLOTS]; + struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS]; + + struct atmel_mci_caps caps; + + u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data); + void (*submit_data)(struct atmel_mci *host, struct mmc_data *data); + void (*stop_transfer)(struct atmel_mci *host); }; /** @@ -219,31 +252,6 @@ struct atmel_mci_slot { #define atmci_set_pending(host, event) \ set_bit(event, &host->pending_events) -/* - * Enable or disable features/registers based on - * whether the processor supports them - */ -static bool mci_has_rwproof(void) -{ - if (cpu_is_at91sam9261() || cpu_is_at91rm9200()) - return false; - else - return true; -} - -/* - * The new MCI2 module isn't 100% compatible with the old MCI module, - * and it has a few nice features which we want to use... - */ -static inline bool atmci_is_mci2(void) -{ - if (cpu_is_at91sam9g45()) - return true; - - return false; -} - - /* * The debugfs stuff below is mostly optimized away when * CONFIG_DEBUG_FS is not set. @@ -352,7 +360,7 @@ static int atmci_regs_show(struct seq_file *s, void *v) struct atmel_mci *host = s->private; u32 *buf; - buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL); + buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -363,47 +371,50 @@ static int atmci_regs_show(struct seq_file *s, void *v) */ spin_lock_bh(&host->lock); clk_enable(host->mck); - memcpy_fromio(buf, host->regs, MCI_REGS_SIZE); + memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE); clk_disable(host->mck); spin_unlock_bh(&host->lock); seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", - buf[MCI_MR / 4], - buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "", - buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "", - buf[MCI_MR / 4] & 0xff); - seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]); - seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]); - seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]); + buf[ATMCI_MR / 4], + buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "", + buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "", + buf[ATMCI_MR / 4] & 0xff); + seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]); + seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]); + seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]); seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n", - buf[MCI_BLKR / 4], - buf[MCI_BLKR / 4] & 0xffff, - (buf[MCI_BLKR / 4] >> 16) & 0xffff); - if (atmci_is_mci2()) - seq_printf(s, "CSTOR:\t0x%08x\n", buf[MCI_CSTOR / 4]); + buf[ATMCI_BLKR / 4], + buf[ATMCI_BLKR / 4] & 0xffff, + (buf[ATMCI_BLKR / 4] >> 16) & 0xffff); + if (host->caps.has_cstor_reg) + seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]); /* Don't read RSPR and RDR; it will consume the data there */ - atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]); - atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]); + atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]); + atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]); - if (atmci_is_mci2()) { + if (host->caps.has_dma) { u32 val; - val = buf[MCI_DMA / 4]; + val = buf[ATMCI_DMA / 4]; seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n", val, val & 3, ((val >> 4) & 3) ? 1 << (((val >> 4) & 3) + 1) : 1, - val & MCI_DMAEN ? " DMAEN" : ""); + val & ATMCI_DMAEN ? " DMAEN" : ""); + } + if (host->caps.has_cfg_reg) { + u32 val; - val = buf[MCI_CFG / 4]; + val = buf[ATMCI_CFG / 4]; seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n", val, - val & MCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", - val & MCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", - val & MCI_CFG_HSMODE ? " HSMODE" : "", - val & MCI_CFG_LSYNC ? " LSYNC" : ""); + val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", + val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", + val & ATMCI_CFG_HSMODE ? " HSMODE" : "", + val & ATMCI_CFG_LSYNC ? " LSYNC" : ""); } kfree(buf); @@ -466,7 +477,7 @@ err: dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); } -static inline unsigned int ns_to_clocks(struct atmel_mci *host, +static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, unsigned int ns) { return (ns * (host->bus_hz / 1000000) + 999) / 1000; @@ -482,7 +493,8 @@ static void atmci_set_timeout(struct atmel_mci *host, unsigned dtocyc; unsigned dtomul; - timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; + timeout = atmci_ns_to_clocks(host, data->timeout_ns) + + data->timeout_clks; for (dtomul = 0; dtomul < 8; dtomul++) { unsigned shift = dtomul_to_shift[dtomul]; @@ -498,7 +510,7 @@ static void atmci_set_timeout(struct atmel_mci *host, dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", dtocyc << dtomul_to_shift[dtomul]); - mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); + atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc))); } /* @@ -512,13 +524,13 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, cmd->error = -EINPROGRESS; - cmdr = MCI_CMDR_CMDNB(cmd->opcode); + cmdr = ATMCI_CMDR_CMDNB(cmd->opcode); if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) - cmdr |= MCI_CMDR_RSPTYP_136BIT; + cmdr |= ATMCI_CMDR_RSPTYP_136BIT; else - cmdr |= MCI_CMDR_RSPTYP_48BIT; + cmdr |= ATMCI_CMDR_RSPTYP_48BIT; } /* @@ -526,34 +538,34 @@ static u32 atmci_prepare_command(struct mmc_host *mmc, * it's too difficult to determine whether this is an ACMD or * not. Better make it 64. */ - cmdr |= MCI_CMDR_MAXLAT_64CYC; + cmdr |= ATMCI_CMDR_MAXLAT_64CYC; if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) - cmdr |= MCI_CMDR_OPDCMD; + cmdr |= ATMCI_CMDR_OPDCMD; data = cmd->data; if (data) { - cmdr |= MCI_CMDR_START_XFER; + cmdr |= ATMCI_CMDR_START_XFER; if (cmd->opcode == SD_IO_RW_EXTENDED) { - cmdr |= MCI_CMDR_SDIO_BLOCK; + cmdr |= ATMCI_CMDR_SDIO_BLOCK; } else { if (data->flags & MMC_DATA_STREAM) - cmdr |= MCI_CMDR_STREAM; + cmdr |= ATMCI_CMDR_STREAM; else if (data->blocks > 1) - cmdr |= MCI_CMDR_MULTI_BLOCK; + cmdr |= ATMCI_CMDR_MULTI_BLOCK; else - cmdr |= MCI_CMDR_BLOCK; + cmdr |= ATMCI_CMDR_BLOCK; } if (data->flags & MMC_DATA_READ) - cmdr |= MCI_CMDR_TRDIR_READ; + cmdr |= ATMCI_CMDR_TRDIR_READ; } return cmdr; } -static void atmci_start_command(struct atmel_mci *host, +static void atmci_send_command(struct atmel_mci *host, struct mmc_command *cmd, u32 cmd_flags) { WARN_ON(host->cmd); @@ -563,43 +575,119 @@ static void atmci_start_command(struct atmel_mci *host, "start command: ARGR=0x%08x CMDR=0x%08x\n", cmd->arg, cmd_flags); - mci_writel(host, ARGR, cmd->arg); - mci_writel(host, CMDR, cmd_flags); + atmci_writel(host, ATMCI_ARGR, cmd->arg); + atmci_writel(host, ATMCI_CMDR, cmd_flags); } -static void send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) +static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) { - atmci_start_command(host, data->stop, host->stop_cmdr); - mci_writel(host, IER, MCI_CMDRDY); + atmci_send_command(host, data->stop, host->stop_cmdr); + atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); } -#ifdef CONFIG_MMC_ATMELMCI_DMA -static void atmci_dma_cleanup(struct atmel_mci *host) +/* + * Configure given PDC buffer taking care of alignement issues. + * Update host->data_size and host->sg. + */ +static void atmci_pdc_set_single_buf(struct atmel_mci *host, + enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) +{ + u32 pointer_reg, counter_reg; + + if (dir == XFER_RECEIVE) { + pointer_reg = ATMEL_PDC_RPR; + counter_reg = ATMEL_PDC_RCR; + } else { + pointer_reg = ATMEL_PDC_TPR; + counter_reg = ATMEL_PDC_TCR; + } + + if (buf_nb == PDC_SECOND_BUF) { + pointer_reg += ATMEL_PDC_SCND_BUF_OFF; + counter_reg += ATMEL_PDC_SCND_BUF_OFF; + } + + atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); + if (host->data_size <= sg_dma_len(host->sg)) { + if (host->data_size & 0x3) { + /* If size is different from modulo 4, transfer bytes */ + atmci_writel(host, counter_reg, host->data_size); + atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE); + } else { + /* Else transfer 32-bits words */ + atmci_writel(host, counter_reg, host->data_size / 4); + } + host->data_size = 0; + } else { + /* We assume the size of a page is 32-bits aligned */ + atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4); + host->data_size -= sg_dma_len(host->sg); + if (host->data_size) + host->sg = sg_next(host->sg); + } +} + +/* + * Configure PDC buffer according to the data size ie configuring one or two + * buffers. Don't use this function if you want to configure only the second + * buffer. In this case, use atmci_pdc_set_single_buf. + */ +static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir) { - struct mmc_data *data = host->data; + atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF); + if (host->data_size) + atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF); +} + +/* + * Unmap sg lists, called when transfer is finished. + */ +static void atmci_pdc_cleanup(struct atmel_mci *host) +{ + struct mmc_data *data = host->data; if (data) - dma_unmap_sg(host->dma.chan->device->dev, - data->sg, data->sg_len, - ((data->flags & MMC_DATA_WRITE) - ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); + dma_unmap_sg(&host->pdev->dev, + data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); } -static void atmci_stop_dma(struct atmel_mci *host) +/* + * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after + * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY + * interrupt needed for both transfer directions. + */ +static void atmci_pdc_complete(struct atmel_mci *host) { - struct dma_chan *chan = host->data_chan; + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); + atmci_pdc_cleanup(host); - if (chan) { - dmaengine_terminate_all(chan); - atmci_dma_cleanup(host); - } else { - /* Data transfer was stopped by the interrupt handler */ + /* + * If the card was removed, data will be NULL. No point trying + * to send the stop command or waiting for NBUSY in this case. + */ + if (host->data) { atmci_set_pending(host, EVENT_XFER_COMPLETE); - mci_writel(host, IER, MCI_NOTBUSY); + tasklet_schedule(&host->tasklet); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } } -/* This function is called by the DMA driver from tasklet context. */ +static void atmci_dma_cleanup(struct atmel_mci *host) +{ + struct mmc_data *data = host->data; + + if (data) + dma_unmap_sg(host->dma.chan->device->dev, + data->sg, data->sg_len, + ((data->flags & MMC_DATA_WRITE) + ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); +} + +/* + * This function is called by the DMA driver from tasklet context. + */ static void atmci_dma_complete(void *arg) { struct atmel_mci *host = arg; @@ -607,9 +695,9 @@ static void atmci_dma_complete(void *arg) dev_vdbg(&host->pdev->dev, "DMA complete\n"); - if (atmci_is_mci2()) + if (host->caps.has_dma) /* Disable DMA hardware handshaking on MCI */ - mci_writel(host, DMA, mci_readl(host, DMA) & ~MCI_DMAEN); + atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN); atmci_dma_cleanup(host); @@ -641,11 +729,93 @@ static void atmci_dma_complete(void *arg) * completion callback" rule of the dma engine * framework. */ - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } } -static int +/* + * Returns a mask of interrupt flags to be enabled after the whole + * request has been prepared. + */ +static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) +{ + u32 iflags; + + data->error = -EINPROGRESS; + + host->sg = data->sg; + host->data = data; + host->data_chan = NULL; + + iflags = ATMCI_DATA_ERROR_FLAGS; + + /* + * Errata: MMC data write operation with less than 12 + * bytes is impossible. + * + * Errata: MCI Transmit Data Register (TDR) FIFO + * corruption when length is not multiple of 4. + */ + if (data->blocks * data->blksz < 12 + || (data->blocks * data->blksz) & 3) + host->need_reset = true; + + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= ATMCI_RXRDY; + else + iflags |= ATMCI_TXRDY; + + return iflags; +} + +/* + * Set interrupt flags and set block length into the MCI mode register even + * if this value is also accessible in the MCI block register. It seems to be + * necessary before the High Speed MCI version. It also map sg and configure + * PDC registers. + */ +static u32 +atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) +{ + u32 iflags, tmp; + unsigned int sg_len; + enum dma_data_direction dir; + + data->error = -EINPROGRESS; + + host->data = data; + host->sg = data->sg; + iflags = ATMCI_DATA_ERROR_FLAGS; + + /* Enable pdc mode */ + atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE); + + if (data->flags & MMC_DATA_READ) { + dir = DMA_FROM_DEVICE; + iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; + } else { + dir = DMA_TO_DEVICE; + iflags |= ATMCI_ENDTX | ATMCI_TXBUFE; + } + + /* Set BLKLEN */ + tmp = atmci_readl(host, ATMCI_MR); + tmp &= 0x0000ffff; + tmp |= ATMCI_BLKLEN(data->blksz); + atmci_writel(host, ATMCI_MR, tmp); + + /* Configure PDC */ + host->data_size = data->blocks * data->blksz; + sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); + if (host->data_size) + atmci_pdc_set_both_buf(host, + ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); + + return iflags; +} + +static u32 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) { struct dma_chan *chan; @@ -654,6 +824,15 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) unsigned int i; enum dma_data_direction direction; unsigned int sglen; + u32 iflags; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + iflags = ATMCI_DATA_ERROR_FLAGS; /* * We don't do DMA on "complex" transfers, i.e. with @@ -661,13 +840,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) * with all the DMA setup overhead for short transfers. */ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) - return -EINVAL; + return atmci_prepare_data(host, data); if (data->blksz & 3) - return -EINVAL; + return atmci_prepare_data(host, data); for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->offset & 3 || sg->length & 3) - return -EINVAL; + return atmci_prepare_data(host, data); } /* If we don't have a channel, we can't do DMA */ @@ -678,8 +857,8 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (!chan) return -ENODEV; - if (atmci_is_mci2()) - mci_writel(host, DMA, MCI_DMA_CHKSIZE(3) | MCI_DMAEN); + if (host->caps.has_dma) + atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN); if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; @@ -687,7 +866,7 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) direction = DMA_TO_DEVICE; sglen = dma_map_sg(chan->device->dev, data->sg, - data->sg_len, direction); + data->sg_len, direction); desc = chan->device->device_prep_slave_sg(chan, data->sg, sglen, direction, @@ -699,13 +878,32 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) desc->callback = atmci_dma_complete; desc->callback_param = host; - return 0; + return iflags; unmap_exit: dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction); return -ENOMEM; } -static void atmci_submit_data(struct atmel_mci *host) +static void +atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) +{ + return; +} + +/* + * Start PDC according to transfer direction. + */ +static void +atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data) +{ + if (data->flags & MMC_DATA_READ) + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); + else + atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); +} + +static void +atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) { struct dma_chan *chan = host->data_chan; struct dma_async_tx_descriptor *desc = host->dma.data_desc; @@ -716,64 +914,39 @@ static void atmci_submit_data(struct atmel_mci *host) } } -#else /* CONFIG_MMC_ATMELMCI_DMA */ - -static int atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) -{ - return -ENOSYS; -} - -static void atmci_submit_data(struct atmel_mci *host) {} - -static void atmci_stop_dma(struct atmel_mci *host) +static void atmci_stop_transfer(struct atmel_mci *host) { - /* Data transfer was stopped by the interrupt handler */ atmci_set_pending(host, EVENT_XFER_COMPLETE); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } -#endif /* CONFIG_MMC_ATMELMCI_DMA */ - /* - * Returns a mask of interrupt flags to be enabled after the whole - * request has been prepared. + * Stop data transfer because error(s) occured. */ -static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) +static void atmci_stop_transfer_pdc(struct atmel_mci *host) { - u32 iflags; - - data->error = -EINPROGRESS; - - WARN_ON(host->data); - host->sg = NULL; - host->data = data; - - iflags = ATMCI_DATA_ERROR_FLAGS; - if (atmci_prepare_data_dma(host, data)) { - host->data_chan = NULL; + atmci_set_pending(host, EVENT_XFER_COMPLETE); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); +} - /* - * Errata: MMC data write operation with less than 12 - * bytes is impossible. - * - * Errata: MCI Transmit Data Register (TDR) FIFO - * corruption when length is not multiple of 4. - */ - if (data->blocks * data->blksz < 12 - || (data->blocks * data->blksz) & 3) - host->need_reset = true; +static void atmci_stop_transfer_dma(struct atmel_mci *host) +{ + struct dma_chan *chan = host->data_chan; - host->sg = data->sg; - host->pio_offset = 0; - if (data->flags & MMC_DATA_READ) - iflags |= MCI_RXRDY; - else - iflags |= MCI_TXRDY; + if (chan) { + dmaengine_terminate_all(chan); + atmci_dma_cleanup(host); + } else { + /* Data transfer was stopped by the interrupt handler */ + atmci_set_pending(host, EVENT_XFER_COMPLETE); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); } - - return iflags; } +/* + * Start a request: prepare data if needed, prepare the command and activate + * interrupts. + */ static void atmci_start_request(struct atmel_mci *host, struct atmel_mci_slot *slot) { @@ -792,24 +965,24 @@ static void atmci_start_request(struct atmel_mci *host, host->data_status = 0; if (host->need_reset) { - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); host->need_reset = false; } - mci_writel(host, SDCR, slot->sdc_reg); + atmci_writel(host, ATMCI_SDCR, slot->sdc_reg); - iflags = mci_readl(host, IMR); - if (iflags & ~(MCI_SDIOIRQA | MCI_SDIOIRQB)) + iflags = atmci_readl(host, ATMCI_IMR); + if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", iflags); if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { /* Send init sequence (74 clock cycles) */ - mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); - while (!(mci_readl(host, SR) & MCI_CMDRDY)) + atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT); + while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY)) cpu_relax(); } iflags = 0; @@ -818,31 +991,31 @@ static void atmci_start_request(struct atmel_mci *host, atmci_set_timeout(host, slot, data); /* Must set block count/size before sending command */ - mci_writel(host, BLKR, MCI_BCNT(data->blocks) - | MCI_BLKLEN(data->blksz)); + atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks) + | ATMCI_BLKLEN(data->blksz)); dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", - MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz)); - iflags |= atmci_prepare_data(host, data); + iflags |= host->prepare_data(host, data); } - iflags |= MCI_CMDRDY; + iflags |= ATMCI_CMDRDY; cmd = mrq->cmd; cmdflags = atmci_prepare_command(slot->mmc, cmd); - atmci_start_command(host, cmd, cmdflags); + atmci_send_command(host, cmd, cmdflags); if (data) - atmci_submit_data(host); + host->submit_data(host, data); if (mrq->stop) { host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); - host->stop_cmdr |= MCI_CMDR_STOP_XFER; + host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; if (!(data->flags & MMC_DATA_WRITE)) - host->stop_cmdr |= MCI_CMDR_TRDIR_READ; + host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ; if (data->flags & MMC_DATA_STREAM) - host->stop_cmdr |= MCI_CMDR_STREAM; + host->stop_cmdr |= ATMCI_CMDR_STREAM; else - host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK; + host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK; } /* @@ -851,7 +1024,7 @@ static void atmci_start_request(struct atmel_mci *host, * conditions (e.g. command and data complete, but stop not * prepared yet.) */ - mci_writel(host, IER, iflags); + atmci_writel(host, ATMCI_IER, iflags); } static void atmci_queue_request(struct atmel_mci *host, @@ -909,13 +1082,13 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct atmel_mci *host = slot->host; unsigned int i; - slot->sdc_reg &= ~MCI_SDCBUS_MASK; + slot->sdc_reg &= ~ATMCI_SDCBUS_MASK; switch (ios->bus_width) { case MMC_BUS_WIDTH_1: - slot->sdc_reg |= MCI_SDCBUS_1BIT; + slot->sdc_reg |= ATMCI_SDCBUS_1BIT; break; case MMC_BUS_WIDTH_4: - slot->sdc_reg |= MCI_SDCBUS_4BIT; + slot->sdc_reg |= ATMCI_SDCBUS_4BIT; break; } @@ -926,10 +1099,10 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_lock_bh(&host->lock); if (!host->mode_reg) { clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } /* @@ -937,7 +1110,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * core ios update when finding the minimum. */ slot->clock = ios->clock; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i] && host->slot[i]->clock && host->slot[i]->clock < clock_min) clock_min = host->slot[i]->clock; @@ -952,28 +1125,28 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) clkdiv = 255; } - host->mode_reg = MCI_MR_CLKDIV(clkdiv); + host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); /* * WRPROOF and RDPROOF prevent overruns/underruns by * stopping the clock when the FIFO is full/empty. * This state is not expected to last for long. */ - if (mci_has_rwproof()) - host->mode_reg |= (MCI_MR_WRPROOF | MCI_MR_RDPROOF); + if (host->caps.has_rwproof) + host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF); - if (atmci_is_mci2()) { + if (host->caps.has_cfg_reg) { /* setup High Speed mode in relation with card capacity */ if (ios->timing == MMC_TIMING_SD_HS) - host->cfg_reg |= MCI_CFG_HSMODE; + host->cfg_reg |= ATMCI_CFG_HSMODE; else - host->cfg_reg &= ~MCI_CFG_HSMODE; + host->cfg_reg &= ~ATMCI_CFG_HSMODE; } if (list_empty(&host->queue)) { - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } else { host->need_clock_update = true; } @@ -984,16 +1157,16 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_lock_bh(&host->lock); slot->clock = 0; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i] && host->slot[i]->clock) { any_slot_active = true; break; } } if (!any_slot_active) { - mci_writel(host, CR, MCI_CR_MCIDIS); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); if (host->mode_reg) { - mci_readl(host, MR); + atmci_readl(host, ATMCI_MR); clk_disable(host->mck); } host->mode_reg = 0; @@ -1057,9 +1230,9 @@ static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable) struct atmel_mci *host = slot->host; if (enable) - mci_writel(host, IER, slot->sdio_irq); + atmci_writel(host, ATMCI_IER, slot->sdio_irq); else - mci_writel(host, IDR, slot->sdio_irq); + atmci_writel(host, ATMCI_IDR, slot->sdio_irq); } static const struct mmc_host_ops atmci_ops = { @@ -1086,9 +1259,9 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) * busy transferring data. */ if (host->need_clock_update) { - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); } host->cur_slot->mrq = NULL; @@ -1117,16 +1290,16 @@ static void atmci_command_complete(struct atmel_mci *host, u32 status = host->cmd_status; /* Read the response from the card (up to 16 bytes) */ - cmd->resp[0] = mci_readl(host, RSPR); - cmd->resp[1] = mci_readl(host, RSPR); - cmd->resp[2] = mci_readl(host, RSPR); - cmd->resp[3] = mci_readl(host, RSPR); + cmd->resp[0] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[1] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[2] = atmci_readl(host, ATMCI_RSPR); + cmd->resp[3] = atmci_readl(host, ATMCI_RSPR); - if (status & MCI_RTOE) + if (status & ATMCI_RTOE) cmd->error = -ETIMEDOUT; - else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE)) + else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE)) cmd->error = -EILSEQ; - else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE)) + else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) cmd->error = -EIO; else cmd->error = 0; @@ -1136,10 +1309,10 @@ static void atmci_command_complete(struct atmel_mci *host, "command error: status=0x%08x\n", status); if (cmd->data) { - atmci_stop_dma(host); + host->stop_transfer(host); host->data = NULL; - mci_writel(host, IDR, MCI_NOTBUSY - | MCI_TXRDY | MCI_RXRDY + atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY + | ATMCI_TXRDY | ATMCI_RXRDY | ATMCI_DATA_ERROR_FLAGS); } } @@ -1191,11 +1364,11 @@ static void atmci_detect_change(unsigned long data) * Reset controller to terminate any ongoing * commands or data transfers. */ - mci_writel(host, CR, MCI_CR_SWRST); - mci_writel(host, CR, MCI_CR_MCIEN); - mci_writel(host, MR, host->mode_reg); - if (atmci_is_mci2()) - mci_writel(host, CFG, host->cfg_reg); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); + atmci_writel(host, ATMCI_MR, host->mode_reg); + if (host->caps.has_cfg_reg) + atmci_writel(host, ATMCI_CFG, host->cfg_reg); host->data = NULL; host->cmd = NULL; @@ -1210,7 +1383,7 @@ static void atmci_detect_change(unsigned long data) /* fall through */ case STATE_SENDING_DATA: mrq->data->error = -ENOMEDIUM; - atmci_stop_dma(host); + host->stop_transfer(host); break; case STATE_DATA_BUSY: case STATE_DATA_ERROR: @@ -1261,7 +1434,7 @@ static void atmci_tasklet_func(unsigned long priv) dev_vdbg(&host->pdev->dev, "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", state, host->pending_events, host->completed_events, - mci_readl(host, IMR)); + atmci_readl(host, ATMCI_IMR)); do { prev_state = state; @@ -1289,9 +1462,9 @@ static void atmci_tasklet_func(unsigned long priv) case STATE_SENDING_DATA: if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { - atmci_stop_dma(host); + host->stop_transfer(host); if (data->stop) - send_stop_cmd(host, data); + atmci_send_stop_cmd(host, data); state = STATE_DATA_ERROR; break; } @@ -1313,11 +1486,11 @@ static void atmci_tasklet_func(unsigned long priv) atmci_set_completed(host, EVENT_DATA_COMPLETE); status = host->data_status; if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { - if (status & MCI_DTOE) { + if (status & ATMCI_DTOE) { dev_dbg(&host->pdev->dev, "data timeout error\n"); data->error = -ETIMEDOUT; - } else if (status & MCI_DCRCE) { + } else if (status & ATMCI_DCRCE) { dev_dbg(&host->pdev->dev, "data CRC error\n"); data->error = -EILSEQ; @@ -1330,7 +1503,7 @@ static void atmci_tasklet_func(unsigned long priv) } else { data->bytes_xfered = data->blocks * data->blksz; data->error = 0; - mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS); + atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS); } if (!data->stop) { @@ -1340,7 +1513,7 @@ static void atmci_tasklet_func(unsigned long priv) prev_state = state = STATE_SENDING_STOP; if (!data->error) - send_stop_cmd(host, data); + atmci_send_stop_cmd(host, data); /* fall through */ case STATE_SENDING_STOP: @@ -1380,7 +1553,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) unsigned int nbytes = 0; do { - value = mci_readl(host, RDR); + value = atmci_readl(host, ATMCI_RDR); if (likely(offset + 4 <= sg->length)) { put_unaligned(value, (u32 *)(buf + offset)); @@ -1412,9 +1585,9 @@ static void atmci_read_data_pio(struct atmel_mci *host) nbytes += offset; } - status = mci_readl(host, SR); + status = atmci_readl(host, ATMCI_SR); if (status & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY + atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; @@ -1423,7 +1596,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) tasklet_schedule(&host->tasklet); return; } - } while (status & MCI_RXRDY); + } while (status & ATMCI_RXRDY); host->pio_offset = offset; data->bytes_xfered += nbytes; @@ -1431,8 +1604,8 @@ static void atmci_read_data_pio(struct atmel_mci *host) return; done: - mci_writel(host, IDR, MCI_RXRDY); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); data->bytes_xfered += nbytes; smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); @@ -1451,7 +1624,7 @@ static void atmci_write_data_pio(struct atmel_mci *host) do { if (likely(offset + 4 <= sg->length)) { value = get_unaligned((u32 *)(buf + offset)); - mci_writel(host, TDR, value); + atmci_writel(host, ATMCI_TDR, value); offset += 4; nbytes += 4; @@ -1472,20 +1645,20 @@ static void atmci_write_data_pio(struct atmel_mci *host) host->sg = sg = sg_next(sg); if (!sg) { - mci_writel(host, TDR, value); + atmci_writel(host, ATMCI_TDR, value); goto done; } offset = 4 - remaining; buf = sg_virt(sg); memcpy((u8 *)&value + remaining, buf, offset); - mci_writel(host, TDR, value); + atmci_writel(host, ATMCI_TDR, value); nbytes += offset; } - status = mci_readl(host, SR); + status = atmci_readl(host, ATMCI_SR); if (status & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY + atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY | ATMCI_DATA_ERROR_FLAGS)); host->data_status = status; data->bytes_xfered += nbytes; @@ -1494,7 +1667,7 @@ static void atmci_write_data_pio(struct atmel_mci *host) tasklet_schedule(&host->tasklet); return; } - } while (status & MCI_TXRDY); + } while (status & ATMCI_TXRDY); host->pio_offset = offset; data->bytes_xfered += nbytes; @@ -1502,8 +1675,8 @@ static void atmci_write_data_pio(struct atmel_mci *host) return; done: - mci_writel(host, IDR, MCI_TXRDY); - mci_writel(host, IER, MCI_NOTBUSY); + atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY); + atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); data->bytes_xfered += nbytes; smp_wmb(); atmci_set_pending(host, EVENT_XFER_COMPLETE); @@ -1511,7 +1684,7 @@ done: static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) { - mci_writel(host, IDR, MCI_CMDRDY); + atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); host->cmd_status = status; smp_wmb(); @@ -1523,7 +1696,7 @@ static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) { int i; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { struct atmel_mci_slot *slot = host->slot[i]; if (slot && (status & slot->sdio_irq)) { mmc_signal_sdio_irq(slot->mmc); @@ -1539,40 +1712,92 @@ static irqreturn_t atmci_interrupt(int irq, void *dev_id) unsigned int pass_count = 0; do { - status = mci_readl(host, SR); - mask = mci_readl(host, IMR); + status = atmci_readl(host, ATMCI_SR); + mask = atmci_readl(host, ATMCI_IMR); pending = status & mask; if (!pending) break; if (pending & ATMCI_DATA_ERROR_FLAGS) { - mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS - | MCI_RXRDY | MCI_TXRDY); - pending &= mci_readl(host, IMR); + atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS + | ATMCI_RXRDY | ATMCI_TXRDY); + pending &= atmci_readl(host, ATMCI_IMR); host->data_status = status; smp_wmb(); atmci_set_pending(host, EVENT_DATA_ERROR); tasklet_schedule(&host->tasklet); } - if (pending & MCI_NOTBUSY) { - mci_writel(host, IDR, - ATMCI_DATA_ERROR_FLAGS | MCI_NOTBUSY); + + if (pending & ATMCI_TXBUFE) { + atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); + /* + * We can receive this interruption before having configured + * the second pdc buffer, so we need to reconfigure first and + * second buffers again + */ + if (host->data_size) { + atmci_pdc_set_both_buf(host, XFER_TRANSMIT); + atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); + atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE); + } else { + atmci_pdc_complete(host); + } + } else if (pending & ATMCI_ENDTX) { + atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); + + if (host->data_size) { + atmci_pdc_set_single_buf(host, + XFER_TRANSMIT, PDC_SECOND_BUF); + atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); + } + } + + if (pending & ATMCI_RXBUFF) { + atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); + atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); + /* + * We can receive this interruption before having configured + * the second pdc buffer, so we need to reconfigure first and + * second buffers again + */ + if (host->data_size) { + atmci_pdc_set_both_buf(host, XFER_RECEIVE); + atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); + atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF); + } else { + atmci_pdc_complete(host); + } + } else if (pending & ATMCI_ENDRX) { + atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); + + if (host->data_size) { + atmci_pdc_set_single_buf(host, + XFER_RECEIVE, PDC_SECOND_BUF); + atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); + } + } + + + if (pending & ATMCI_NOTBUSY) { + atmci_writel(host, ATMCI_IDR, + ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY); if (!host->data_status) host->data_status = status; smp_wmb(); atmci_set_pending(host, EVENT_DATA_COMPLETE); tasklet_schedule(&host->tasklet); } - if (pending & MCI_RXRDY) + if (pending & ATMCI_RXRDY) atmci_read_data_pio(host); - if (pending & MCI_TXRDY) + if (pending & ATMCI_TXRDY) atmci_write_data_pio(host); - if (pending & MCI_CMDRDY) + if (pending & ATMCI_CMDRDY) atmci_cmd_interrupt(host, status); - if (pending & (MCI_SDIOIRQA | MCI_SDIOIRQB)) + if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) atmci_sdio_interrupt(host, status); } while (pass_count++ < 5); @@ -1621,7 +1846,7 @@ static int __init atmci_init_slot(struct atmel_mci *host, mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; if (sdio_irq) mmc->caps |= MMC_CAP_SDIO_IRQ; - if (atmci_is_mci2()) + if (host->caps.has_highspeed) mmc->caps |= MMC_CAP_SD_HIGHSPEED; if (slot_data->bus_width >= 4) mmc->caps |= MMC_CAP_4_BIT_DATA; @@ -1704,8 +1929,7 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -#ifdef CONFIG_MMC_ATMELMCI_DMA -static bool filter(struct dma_chan *chan, void *slave) +static bool atmci_filter(struct dma_chan *chan, void *slave) { struct mci_dma_data *sl = slave; @@ -1730,14 +1954,14 @@ static void atmci_configure_dma(struct atmel_mci *host) dma_cap_mask_t mask; setup_dma_addr(pdata->dma_slave, - host->mapbase + MCI_TDR, - host->mapbase + MCI_RDR); + host->mapbase + ATMCI_TDR, + host->mapbase + ATMCI_RDR); /* Try to grab a DMA channel */ dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); host->dma.chan = - dma_request_channel(mask, filter, pdata->dma_slave); + dma_request_channel(mask, atmci_filter, pdata->dma_slave); } if (!host->dma.chan) dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); @@ -1746,9 +1970,60 @@ static void atmci_configure_dma(struct atmel_mci *host) "Using %s for DMA transfers\n", dma_chan_name(host->dma.chan)); } + +static inline unsigned int atmci_get_version(struct atmel_mci *host) +{ + return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; +} + +/* + * HSMCI (High Speed MCI) module is not fully compatible with MCI module. + * HSMCI provides DMA support and a new config register but no more supports + * PDC. + */ +static void __init atmci_get_cap(struct atmel_mci *host) +{ + unsigned int version; + + version = atmci_get_version(host); + dev_info(&host->pdev->dev, + "version: 0x%x\n", version); + + host->caps.has_dma = 0; + host->caps.has_pdc = 0; + host->caps.has_cfg_reg = 0; + host->caps.has_cstor_reg = 0; + host->caps.has_highspeed = 0; + host->caps.has_rwproof = 0; + + /* keep only major version number */ + switch (version & 0xf00) { + case 0x100: + case 0x200: + host->caps.has_pdc = 1; + host->caps.has_rwproof = 1; + break; + case 0x300: + case 0x400: + case 0x500: +#ifdef CONFIG_AT_HDMAC + host->caps.has_dma = 1; #else -static void atmci_configure_dma(struct atmel_mci *host) {} + host->caps.has_dma = 0; + dev_info(&host->pdev->dev, + "has dma capability but dma engine is not selected, then use pio\n"); #endif + host->caps.has_cfg_reg = 1; + host->caps.has_cstor_reg = 1; + host->caps.has_highspeed = 1; + host->caps.has_rwproof = 1; + break; + default: + dev_warn(&host->pdev->dev, + "Unmanaged mci version, set minimum capabilities\n"); + break; + } +} static int __init atmci_probe(struct platform_device *pdev) { @@ -1789,7 +2064,7 @@ static int __init atmci_probe(struct platform_device *pdev) goto err_ioremap; clk_enable(host->mck); - mci_writel(host, CR, MCI_CR_SWRST); + atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); host->bus_hz = clk_get_rate(host->mck); clk_disable(host->mck); @@ -1801,7 +2076,27 @@ static int __init atmci_probe(struct platform_device *pdev) if (ret) goto err_request_irq; - atmci_configure_dma(host); + /* Get MCI capabilities and set operations according to it */ + atmci_get_cap(host); + if (host->caps.has_dma) { + dev_info(&pdev->dev, "using DMA\n"); + host->prepare_data = &atmci_prepare_data_dma; + host->submit_data = &atmci_submit_data_dma; + host->stop_transfer = &atmci_stop_transfer_dma; + } else if (host->caps.has_pdc) { + dev_info(&pdev->dev, "using PDC\n"); + host->prepare_data = &atmci_prepare_data_pdc; + host->submit_data = &atmci_submit_data_pdc; + host->stop_transfer = &atmci_stop_transfer_pdc; + } else { + dev_info(&pdev->dev, "no DMA, no PDC\n"); + host->prepare_data = &atmci_prepare_data; + host->submit_data = &atmci_submit_data; + host->stop_transfer = &atmci_stop_transfer; + } + + if (host->caps.has_dma) + atmci_configure_dma(host); platform_set_drvdata(pdev, host); @@ -1810,13 +2105,13 @@ static int __init atmci_probe(struct platform_device *pdev) ret = -ENODEV; if (pdata->slot[0].bus_width) { ret = atmci_init_slot(host, &pdata->slot[0], - 0, MCI_SDCSEL_SLOT_A, MCI_SDIOIRQA); + 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); if (!ret) nr_slots++; } if (pdata->slot[1].bus_width) { ret = atmci_init_slot(host, &pdata->slot[1], - 1, MCI_SDCSEL_SLOT_B, MCI_SDIOIRQB); + 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); if (!ret) nr_slots++; } @@ -1833,10 +2128,8 @@ static int __init atmci_probe(struct platform_device *pdev) return 0; err_init_slot: -#ifdef CONFIG_MMC_ATMELMCI_DMA if (host->dma.chan) dma_release_channel(host->dma.chan); -#endif free_irq(irq, host); err_request_irq: iounmap(host->regs); @@ -1854,15 +2147,15 @@ static int __exit atmci_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { if (host->slot[i]) atmci_cleanup_slot(host->slot[i], i); } clk_enable(host->mck); - mci_writel(host, IDR, ~0UL); - mci_writel(host, CR, MCI_CR_MCIDIS); - mci_readl(host, SR); + atmci_writel(host, ATMCI_IDR, ~0UL); + atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); + atmci_readl(host, ATMCI_SR); clk_disable(host->mck); #ifdef CONFIG_MMC_ATMELMCI_DMA @@ -1885,7 +2178,7 @@ static int atmci_suspend(struct device *dev) struct atmel_mci *host = dev_get_drvdata(dev); int i; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { struct atmel_mci_slot *slot = host->slot[i]; int ret; @@ -1916,7 +2209,7 @@ static int atmci_resume(struct device *dev) int i; int ret = 0; - for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) { + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { struct atmel_mci_slot *slot = host->slot[i]; int err;