X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=drivers%2Fusb%2Fdwc2%2Fplatform.c;h=da2824581b08493785ea99da14214f1a08533324;hb=08d26ac585e833904a236b629e2172c302971807;hp=39c1cbf0e75d9a5957b1567def5d23fb3631a015;hpb=d7637d01bef21848d156a219626b6541ccc0a734;p=firefly-linux-kernel-4.4.55.git diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 39c1cbf0e75d..da2824581b08 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -54,11 +54,44 @@ static const char dwc2_driver_name[] = "dwc2"; +static const struct dwc2_core_params params_hi6220 = { + .otg_cap = 2, /* No HNP/SRP capable */ + .otg_ver = 0, /* 1.3 */ + .dma_enable = 1, + .dma_desc_enable = 0, + .dma_desc_fs_enable = 0, + .speed = 0, /* High Speed */ + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = 1, + .host_rx_fifo_size = 512, + .host_nperio_tx_fifo_size = 512, + .host_perio_tx_fifo_size = 512, + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = 16, + .phy_type = 1, /* UTMI */ + .phy_utmi_width = 8, + .phy_ulpi_ddr = 0, /* Single */ + .phy_ulpi_ext_vbus = 0, + .i2c_enable = 0, + .ulpi_fs_ls = 0, + .host_support_fs_ls_low_power = 0, + .host_ls_low_power_phy_clk = 0, /* 48 MHz */ + .ts_dline = 0, + .reload_ctl = 0, + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = 0, + .external_id_pin_ctl = -1, + .hibernation = -1, +}; + static const struct dwc2_core_params params_bcm2835 = { .otg_cap = 0, /* HNP/SRP capable */ .otg_ver = 0, /* 1.3 */ .dma_enable = 1, .dma_desc_enable = 0, + .dma_desc_fs_enable = 0, .speed = 0, /* High Speed */ .enable_dynamic_fifo = 1, .en_multiple_tx_fifo = 1, @@ -89,13 +122,14 @@ static const struct dwc2_core_params params_rk3066 = { .otg_ver = -1, .dma_enable = -1, .dma_desc_enable = 0, + .dma_desc_fs_enable = 0, .speed = -1, .enable_dynamic_fifo = 1, .en_multiple_tx_fifo = -1, - .host_rx_fifo_size = 520, /* 520 DWORDs */ + .host_rx_fifo_size = 525, /* 525 DWORDs */ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ .host_perio_tx_fifo_size = 256, /* 256 DWORDs */ - .max_transfer_size = 65535, + .max_transfer_size = -1, .max_packet_count = -1, .host_channels = -1, .phy_type = -1, @@ -115,6 +149,103 @@ static const struct dwc2_core_params params_rk3066 = { .hibernation = -1, }; +static const struct dwc2_core_params params_ltq = { + .otg_cap = 2, /* non-HNP/non-SRP */ + .otg_ver = -1, + .dma_enable = -1, + .dma_desc_enable = -1, + .dma_desc_fs_enable = -1, + .speed = -1, + .enable_dynamic_fifo = -1, + .en_multiple_tx_fifo = -1, + .host_rx_fifo_size = 288, /* 288 DWORDs */ + .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ + .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, + .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT, + .uframe_sched = -1, + .external_id_pin_ctl = -1, + .hibernation = -1, +}; + +/* + * Check the dr_mode against the module configuration and hardware + * capabilities. + * + * The hardware, module, and dr_mode, can each be set to host, device, + * or otg. Check that all these values are compatible and adjust the + * value of dr_mode if possible. + * + * actual + * HW MOD dr_mode dr_mode + * ------------------------------ + * HST HST any : HST + * HST DEV any : --- + * HST OTG any : HST + * + * DEV HST any : --- + * DEV DEV any : DEV + * DEV OTG any : DEV + * + * OTG HST any : HST + * OTG DEV any : DEV + * OTG OTG any : dr_mode + */ +static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) +{ + enum usb_dr_mode mode; + + hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); + if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) + hsotg->dr_mode = USB_DR_MODE_OTG; + + mode = hsotg->dr_mode; + + if (dwc2_hw_is_device(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { + dev_err(hsotg->dev, + "Controller does not support host mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_PERIPHERAL; + } else if (dwc2_hw_is_host(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { + dev_err(hsotg->dev, + "Controller does not support device mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_HOST; + } else { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) + mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) + mode = USB_DR_MODE_PERIPHERAL; + } + + if (mode != hsotg->dr_mode) { + dev_warn(hsotg->dev, + "Configuration mismatch. dr_mode forced to %s\n", + mode == USB_DR_MODE_HOST ? "host" : "device"); + + hsotg->dr_mode = mode; + } + + return 0; +} + static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) { struct platform_device *pdev = to_platform_device(hsotg->dev); @@ -202,6 +333,14 @@ int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) return ret; } +/* Only used to reset usb phy at interrupter runtime */ +static void dwc2_reset_phy_work(struct work_struct *data) +{ + struct dwc2_hsotg *hsotg = container_of(data, struct dwc2_hsotg, + phy_rst_work); + phy_reset(hsotg->phy); +} + static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) { int i, ret; @@ -228,6 +367,7 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) return ret; } } + INIT_WORK(&hsotg->phy_rst_work, dwc2_reset_phy_work); if (!hsotg->phy) { hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); @@ -306,9 +446,31 @@ static int dwc2_driver_remove(struct platform_device *dev) return 0; } +/** + * dwc2_driver_shutdown() - Called on device shutdown + * + * @dev: Platform device + * + * In specific conditions (involving usb hubs) dwc2 devices can create a + * lot of interrupts, even to the point of overwhelming devices running + * at low frequencies. Some devices need to do special clock handling + * at shutdown-time which may bring the system clock below the threshold + * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs + * prevents reboots/poweroffs from getting stuck in such cases. + */ +static void dwc2_driver_shutdown(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + + disable_irq(hsotg->irq); +} + static const struct of_device_id dwc2_of_match_table[] = { { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 }, { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, + { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, + { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, { .compatible = "snps,dwc2", .data = NULL }, { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, {}, @@ -335,7 +497,6 @@ static int dwc2_driver_probe(struct platform_device *dev) struct dwc2_hsotg *hsotg; struct resource *res; int retval; - int irq; match = of_match_device(dwc2_of_match_table, &dev->dev); if (match && match->data) { @@ -348,8 +509,10 @@ static int dwc2_driver_probe(struct platform_device *dev) /* * Disable descriptor dma mode by default as the HW can support * it, but does not support it for SPLIT transactions. + * Disable it for FS devices as well. */ defparams.dma_desc_enable = 0; + defparams.dma_desc_fs_enable = 0; } hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); @@ -375,19 +538,6 @@ static int dwc2_driver_probe(struct platform_device *dev) dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", (unsigned long)res->start, hsotg->regs); - hsotg->dr_mode = usb_get_dr_mode(&dev->dev); - if (IS_ENABLED(CONFIG_USB_DWC2_HOST) && - hsotg->dr_mode != USB_DR_MODE_HOST) { - hsotg->dr_mode = USB_DR_MODE_HOST; - dev_warn(hsotg->dev, - "Configuration mismatch. Forcing host mode\n"); - } else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) && - hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { - hsotg->dr_mode = USB_DR_MODE_PERIPHERAL; - dev_warn(hsotg->dev, - "Configuration mismatch. Forcing peripheral mode\n"); - } - retval = dwc2_lowlevel_hw_init(hsotg); if (retval) return retval; @@ -401,15 +551,15 @@ static int dwc2_driver_probe(struct platform_device *dev) dwc2_set_all_params(hsotg->core_params, -1); - irq = platform_get_irq(dev, 0); - if (irq < 0) { + hsotg->irq = platform_get_irq(dev, 0); + if (hsotg->irq < 0) { dev_err(&dev->dev, "missing IRQ resource\n"); - return irq; + return hsotg->irq; } dev_dbg(hsotg->dev, "registering common handler for irq%d\n", - irq); - retval = devm_request_irq(hsotg->dev, irq, + hsotg->irq); + retval = devm_request_irq(hsotg->dev, hsotg->irq, dwc2_handle_common_intr, IRQF_SHARED, dev_name(hsotg->dev), hsotg); if (retval) @@ -419,6 +569,16 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) return retval; + retval = dwc2_get_dr_mode(hsotg); + if (retval) + return retval; + + /* + * Reset before dwc2_get_hwparams() then it could get power-on real + * reset value form registers. + */ + dwc2_core_reset_and_force_dr_mode(hsotg); + /* Detect config values from hardware */ retval = dwc2_get_hwparams(hsotg); if (retval) @@ -427,15 +587,17 @@ static int dwc2_driver_probe(struct platform_device *dev) /* Validate parameter values */ dwc2_set_parameters(hsotg, params); + dwc2_force_dr_mode(hsotg); + if (hsotg->dr_mode != USB_DR_MODE_HOST) { - retval = dwc2_gadget_init(hsotg, irq); + retval = dwc2_gadget_init(hsotg, hsotg->irq); if (retval) goto error; hsotg->gadget_enabled = 1; } if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { - retval = dwc2_hcd_init(hsotg, irq); + retval = dwc2_hcd_init(hsotg, hsotg->irq); if (retval) { if (hsotg->gadget_enabled) dwc2_hsotg_remove(hsotg); @@ -502,6 +664,7 @@ static struct platform_driver dwc2_platform_driver = { }, .probe = dwc2_driver_probe, .remove = dwc2_driver_remove, + .shutdown = dwc2_driver_shutdown, }; module_platform_driver(dwc2_platform_driver);