X-Git-Url: http://demsky.eecs.uci.edu/git/?a=blobdiff_plain;f=sound%2Fsoc%2Fcodecs%2Frt5677.c;h=b4cd7e3bf5f89f9ea940528f233f017151788a4b;hb=c009d370dd35eb29a8c14f6eb50a4da4276db3f1;hp=31d969ac11920ff419981caee098a234baf4d0f7;hpb=d4113f2f174aea83f0871cf5d050e0e08dfb9781;p=firefly-linux-kernel-4.4.55.git diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 31d969ac1192..b4cd7e3bf5f8 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -15,13 +15,12 @@ #include #include #include -#include #include #include #include #include #include -#include +#include #include #include #include @@ -54,7 +53,7 @@ static const struct regmap_range_cfg rt5677_ranges[] = { }, }; -static const struct reg_default init_list[] = { +static const struct reg_sequence init_list[] = { {RT5677_ASRC_12, 0x0018}, {RT5677_PR_BASE + 0x3d, 0x364d}, {RT5677_PR_BASE + 0x17, 0x4fc0}, @@ -746,14 +745,14 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) ret = request_firmware(&rt5677->fw1, RT5677_FIRMWARE1, codec->dev); if (ret == 0) { - rt5677_spi_burst_write(0x50000000, rt5677->fw1); + rt5677_spi_write_firmware(0x50000000, rt5677->fw1); release_firmware(rt5677->fw1); } ret = request_firmware(&rt5677->fw2, RT5677_FIRMWARE2, codec->dev); if (ret == 0) { - rt5677_spi_burst_write(0x60000000, rt5677->fw2); + rt5677_spi_write_firmware(0x60000000, rt5677->fw2); release_firmware(rt5677->fw2); } @@ -789,16 +788,15 @@ static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); static const DECLARE_TLV_DB_SCALE(st_vol_tlv, -4650, 150, 0); /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ -static unsigned int bst_tlv[] = { - TLV_DB_RANGE_HEAD(7), +static const DECLARE_TLV_DB_RANGE(bst_tlv, 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), 1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0), 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), 3, 5, TLV_DB_SCALE_ITEM(3000, 500, 0), 6, 6, TLV_DB_SCALE_ITEM(4400, 0, 0), 7, 7, TLV_DB_SCALE_ITEM(5000, 0, 0), - 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0), -}; + 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0) +); static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) @@ -917,8 +915,11 @@ static int set_dmic_clk(struct snd_soc_dapm_widget *w, { struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); - int idx = rl6231_calc_dmic_clk(rt5677->lrck[RT5677_AIF1] << 8); + int idx, rate; + rate = rt5677->sysclk / rl6231_get_pre_div(rt5677->regmap, + RT5677_CLK_TREE_CTRL1, RT5677_I2S_PD1_SFT); + idx = rl6231_calc_dmic_clk(rate); if (idx < 0) dev_err(codec->dev, "Failed to set DMIC clock\n"); else @@ -4764,10 +4765,8 @@ static int rt5677_remove(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 0); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 0); return 0; } @@ -4781,10 +4780,8 @@ static int rt5677_suspend(struct snd_soc_codec *codec) regcache_cache_only(rt5677->regmap, true); regcache_mark_dirty(rt5677->regmap); - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 0); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 0); + gpiod_set_value_cansleep(rt5677->pow_ldo2, 0); + gpiod_set_value_cansleep(rt5677->reset_pin, 0); } return 0; @@ -4795,12 +4792,9 @@ static int rt5677_resume(struct snd_soc_codec *codec) struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); if (!rt5677->dsp_vad_en) { - if (gpio_is_valid(rt5677->pow_ldo2)) - gpio_set_value_cansleep(rt5677->pow_ldo2, 1); - if (gpio_is_valid(rt5677->reset_pin)) - gpio_set_value_cansleep(rt5677->reset_pin, 1); - if (gpio_is_valid(rt5677->pow_ldo2) || - gpio_is_valid(rt5677->reset_pin)) + gpiod_set_value_cansleep(rt5677->pow_ldo2, 1); + gpiod_set_value_cansleep(rt5677->reset_pin, 1); + if (rt5677->pow_ldo2 || rt5677->reset_pin) msleep(10); regcache_cache_only(rt5677->regmap, false); @@ -4863,7 +4857,7 @@ static int rt5677_write(void *context, unsigned int reg, unsigned int val) #define RT5677_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) -static struct snd_soc_dai_ops rt5677_aif_dai_ops = { +static const struct snd_soc_dai_ops rt5677_aif_dai_ops = { .hw_params = rt5677_hw_params, .set_fmt = rt5677_set_dai_fmt, .set_sysclk = rt5677_set_dai_sysclk, @@ -5024,45 +5018,29 @@ static const struct i2c_device_id rt5677_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, rt5677_i2c_id); -static int rt5677_parse_dt(struct rt5677_priv *rt5677, struct device_node *np) +static void rt5677_read_device_properties(struct rt5677_priv *rt5677, + struct device *dev) { - rt5677->pdata.in1_diff = of_property_read_bool(np, - "realtek,in1-differential"); - rt5677->pdata.in2_diff = of_property_read_bool(np, - "realtek,in2-differential"); - rt5677->pdata.lout1_diff = of_property_read_bool(np, - "realtek,lout1-differential"); - rt5677->pdata.lout2_diff = of_property_read_bool(np, - "realtek,lout2-differential"); - rt5677->pdata.lout3_diff = of_property_read_bool(np, - "realtek,lout3-differential"); - - rt5677->pow_ldo2 = of_get_named_gpio(np, - "realtek,pow-ldo2-gpio", 0); - rt5677->reset_pin = of_get_named_gpio(np, - "realtek,reset-gpio", 0); - - /* - * POW_LDO2 is optional (it may be statically tied on the board). - * -ENOENT means that the property doesn't exist, i.e. there is no - * GPIO, so is not an error. Any other error code means the property - * exists, but could not be parsed. - */ - if (!gpio_is_valid(rt5677->pow_ldo2) && - (rt5677->pow_ldo2 != -ENOENT)) - return rt5677->pow_ldo2; - if (!gpio_is_valid(rt5677->reset_pin) && - (rt5677->reset_pin != -ENOENT)) - return rt5677->reset_pin; - - of_property_read_u8_array(np, "realtek,gpio-config", - rt5677->pdata.gpio_config, RT5677_GPIO_NUM); - - of_property_read_u32(np, "realtek,jd1-gpio", &rt5677->pdata.jd1_gpio); - of_property_read_u32(np, "realtek,jd2-gpio", &rt5677->pdata.jd2_gpio); - of_property_read_u32(np, "realtek,jd3-gpio", &rt5677->pdata.jd3_gpio); - - return 0; + rt5677->pdata.in1_diff = device_property_read_bool(dev, + "realtek,in1-differential"); + rt5677->pdata.in2_diff = device_property_read_bool(dev, + "realtek,in2-differential"); + rt5677->pdata.lout1_diff = device_property_read_bool(dev, + "realtek,lout1-differential"); + rt5677->pdata.lout2_diff = device_property_read_bool(dev, + "realtek,lout2-differential"); + rt5677->pdata.lout3_diff = device_property_read_bool(dev, + "realtek,lout3-differential"); + + device_property_read_u8_array(dev, "realtek,gpio-config", + rt5677->pdata.gpio_config, RT5677_GPIO_NUM); + + device_property_read_u32(dev, "realtek,jd1-gpio", + &rt5677->pdata.jd1_gpio); + device_property_read_u32(dev, "realtek,jd2-gpio", + &rt5677->pdata.jd2_gpio); + device_property_read_u32(dev, "realtek,jd3-gpio", + &rt5677->pdata.jd3_gpio); } static struct regmap_irq rt5677_irqs[] = { @@ -5145,43 +5123,29 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, if (pdata) rt5677->pdata = *pdata; + else + rt5677_read_device_properties(rt5677, &i2c->dev); - if (i2c->dev.of_node) { - ret = rt5677_parse_dt(rt5677, i2c->dev.of_node); - if (ret) { - dev_err(&i2c->dev, "Failed to parse device tree: %d\n", - ret); - return ret; - } - } else { - rt5677->pow_ldo2 = -EINVAL; - rt5677->reset_pin = -EINVAL; - } - - if (gpio_is_valid(rt5677->pow_ldo2)) { - ret = devm_gpio_request_one(&i2c->dev, rt5677->pow_ldo2, - GPIOF_OUT_INIT_HIGH, - "RT5677 POW_LDO2"); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to request POW_LDO2 %d: %d\n", - rt5677->pow_ldo2, ret); - return ret; - } + /* pow-ldo2 and reset are optional. The codec pins may be statically + * connected on the board without gpios. If the gpio device property + * isn't specified, devm_gpiod_get_optional returns NULL. + */ + rt5677->pow_ldo2 = devm_gpiod_get_optional(&i2c->dev, + "realtek,pow-ldo2", GPIOD_OUT_HIGH); + if (IS_ERR(rt5677->pow_ldo2)) { + ret = PTR_ERR(rt5677->pow_ldo2); + dev_err(&i2c->dev, "Failed to request POW_LDO2: %d\n", ret); + return ret; } - - if (gpio_is_valid(rt5677->reset_pin)) { - ret = devm_gpio_request_one(&i2c->dev, rt5677->reset_pin, - GPIOF_OUT_INIT_HIGH, - "RT5677 RESET"); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to request RESET %d: %d\n", - rt5677->reset_pin, ret); - return ret; - } + rt5677->reset_pin = devm_gpiod_get_optional(&i2c->dev, + "realtek,reset", GPIOD_OUT_HIGH); + if (IS_ERR(rt5677->reset_pin)) { + ret = PTR_ERR(rt5677->reset_pin); + dev_err(&i2c->dev, "Failed to request RESET: %d\n", ret); + return ret; } - if (gpio_is_valid(rt5677->pow_ldo2) || - gpio_is_valid(rt5677->reset_pin)) { + if (rt5677->pow_ldo2 || rt5677->reset_pin) { /* Wait a while until I2C bus becomes available. The datasheet * does not specify the exact we should wait but startup * sequence mentiones at least a few milliseconds. @@ -5209,7 +5173,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, regmap_read(rt5677->regmap, RT5677_VENDOR_ID2, &val); if (val != RT5677_DEVICE_ID) { dev_err(&i2c->dev, - "Device with ID register %x is not rt5677\n", val); + "Device with ID register %#x is not rt5677\n", val); return -ENODEV; } @@ -5273,7 +5237,6 @@ static int rt5677_i2c_remove(struct i2c_client *i2c) static struct i2c_driver rt5677_i2c_driver = { .driver = { .name = "rt5677", - .owner = THIS_MODULE, }, .probe = rt5677_i2c_probe, .remove = rt5677_i2c_remove,