Removing register defines which are not used by Qlgoic CNA device.
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
#define get_next_index(index, length) \
(((index) + 1) & ((length) - 1))
#define get_next_index(index, length) \
(((index) + 1) & ((length) - 1))
-#define MPORT_MULTI_FUNCTION_MODE 0x2222
-
/*
* Following data structures describe the descriptors that will be used.
* Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
/*
* Following data structures describe the descriptors that will be used.
* Added fileds of tcpHdrSize and ipHdrSize, The driver needs to do it only when
#define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec))
#define CRB_PF_LINK_SPEED_1 (QLCNIC_REG(0xe8))
#define CRB_PF_LINK_SPEED_2 (QLCNIC_REG(0xec))
-#define CRB_MPORT_MODE (QLCNIC_REG(0xc4))
-#define CRB_DMA_SHIFT (QLCNIC_REG(0xcc))
-
#define CRB_TEMP_STATE (QLCNIC_REG(0x1b4))
#define CRB_V2P_0 (QLCNIC_REG(0x290))
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION (QLCNIC_REG(0x2a0))
#define CRB_TEMP_STATE (QLCNIC_REG(0x1b4))
#define CRB_V2P_0 (QLCNIC_REG(0x290))
#define CRB_V2P(port) (CRB_V2P_0+((port)*4))
#define CRB_DRIVER_VERSION (QLCNIC_REG(0x2a0))
-#define CRB_SW_INT_MASK_0 (QLCNIC_REG(0x1d8))
-#define CRB_SW_INT_MASK_1 (QLCNIC_REG(0x1e0))
-#define CRB_SW_INT_MASK_2 (QLCNIC_REG(0x1e4))
-#define CRB_SW_INT_MASK_3 (QLCNIC_REG(0x1e8))
-
#define CRB_FW_CAPABILITIES_1 (QLCNIC_CAM_RAM(0x128))
#define CRB_MAC_BLOCK_START (QLCNIC_CAM_RAM(0x1c0))
#define CRB_FW_CAPABILITIES_1 (QLCNIC_CAM_RAM(0x128))
#define CRB_MAC_BLOCK_START (QLCNIC_CAM_RAM(0x1c0))
-/*
- * capabilities register, can be used to selectively enable/disable features
- * for backward compability
- */
-#define CRB_NIC_CAPABILITIES_HOST QLCNIC_REG(0x1a8)
-
-#define INTR_SCHEME_PERPORT 0x1
-
/*
* CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
* which can be read by the Phantom host to get producer/consumer indexes from
/*
* CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
* which can be read by the Phantom host to get producer/consumer indexes from
- QLCWR32(adapter, CRB_NIC_CAPABILITIES_HOST, INTR_SCHEME_PERPORT);
- QLCWR32(adapter, CRB_MPORT_MODE, MPORT_MULTI_FUNCTION_MODE);
QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
return err;
QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
return err;
- QLCWR32(adapter, CRB_DMA_SHIFT, 0x55555555);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);