DT nodes that contain a reg property should include a unit address in
their name. Add the missing unit addresses.
The unit address in a node name must match the value in the reg property.
Fix the cases where they don't match.
Don't fix the /clocks/* node names yet; that causes problems the clock
driver to attempt to register multiple clocks with the same name, which
fails.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
#size-cells = <1>;
ranges = <0x7e000000 0x20000000 0x02000000>;
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
compatible = "brcm,bcm2835-system-timer";
reg = <0x7e003000 0x1000>;
interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
brcm,dma-channel-mask = <0x7f35>;
};
brcm,dma-channel-mask = <0x7f35>;
};
- intc: interrupt-controller {
+ intc: interrupt-controller@7e00b200 {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x28>;
};
compatible = "brcm,bcm2835-pm-wdt";
reg = <0x7e100000 0x28>;
};
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
};
compatible = "brcm,bcm2835-rng";
reg = <0x7e104000 0x10>;
};
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
/*
compatible = "brcm,bcm2835-gpio";
reg = <0x7e200000 0xb4>;
/*
#interrupt-cells = <2>;
};
#interrupt-cells = <2>;
};
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
reg = <0x7e201000 0x1000>;
interrupts = <2 25>;
dma-names = "tx", "rx";
};
dma-names = "tx", "rx";
};
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
compatible = "brcm,bcm2835-spi";
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
+ sdhci: sdhci@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
interrupts = <2 30>;
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
interrupts = <2 21>;
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;