The rt2x00 driver uses 0x22 as a default VGC value
in VGC adjustment for the RT3572 chipset. In the
Ralink DPO_RT5572_LinuxSTA_2.6.1.3_20121022 driver,
this value is only used for initialization. During
VGC adjustment, the reference driver uses different
values.
Update the 'rt2800_get_default_vgc' function to
synchronize the values with the reference driver.
Also add the missing AGC initialization code into
the 'rt2800_config_channel' function.
References:
RT35xx_SetAGCInitValue in chip/rt35xx.c
RT35xx_ChipAGCAdjust in chip/rt35xx.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
- if (rt2x00_rt(rt2x00dev, RT3572))
+ if (rt2x00_rt(rt2x00dev, RT3572)) {
rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
+ /* AGC init */
+ if (rf->channel <= 14)
+ reg = 0x1c + (2 * rt2x00dev->lna_gain);
+ else
+ reg = 0x22 + ((rt2x00dev->lna_gain * 5) / 3);
+
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+ }
+
if (rt2x00_rt(rt2x00dev, RT3593)) {
rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
if (rt2x00_rt(rt2x00dev, RT3593)) {
rt2800_register_read(rt2x00dev, GPIO_CTRL, ®);
else
vgc = 0x2e + rt2x00dev->lna_gain;
} else { /* 5GHZ band */
else
vgc = 0x2e + rt2x00dev->lna_gain;
} else { /* 5GHZ band */
- if (rt2x00_rt(rt2x00dev, RT3572))
- vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3;
- else if (rt2x00_rt(rt2x00dev, RT3593))
+ if (rt2x00_rt(rt2x00dev, RT3593))
vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
else if (rt2x00_rt(rt2x00dev, RT5592))
vgc = 0x24 + (2 * rt2x00dev->lna_gain);
vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3;
else if (rt2x00_rt(rt2x00dev, RT5592))
vgc = 0x24 + (2 * rt2x00dev->lna_gain);