When SFP+ module is plugged in after driver is already loaded, it may not be
recognized, so set SFP module recognition time up to 300ms, without resetting
the module power in the middle.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
{
int rc = 0;
u8 i, j = 0, cnt = 0;
{
int rc = 0;
u8 i, j = 0, cnt = 0;
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
- if (cnt == I2C_WA_PWR_ITER) {
+ if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
- usleep_range(1000,1000);
+ usleep_range(1000, 2000);
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
*/
for (timeout = 0; timeout < 60; timeout++) {
*/
for (timeout = 0; timeout < 60; timeout++) {
- if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
- == 0) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+ params, 1,
+ 1, &val, 1);
+ else
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+ &val);
+ if (rc == 0) {
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
}
usleep_range(5000, 10000);
}
}
usleep_range(5000, 10000);
}
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+ return rc;
}
static void bnx2x_8727_power_module(struct bnx2x *bp,
}
static void bnx2x_8727_power_module(struct bnx2x *bp,