USB: xhci: correctly enable interrupts
authorHannes Reinecke <hare@suse.de>
Mon, 4 Mar 2013 16:14:43 +0000 (17:14 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 15 Mar 2013 19:07:53 +0000 (12:07 -0700)
xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.

v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Frederik Himpe <fhimpe@vub.ac.be>
Cc: David Haerdeman <david@hardeman.nu>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/core/hcd-pci.c
drivers/usb/host/xhci.c

index 622b4a48e732e7a83b6c760d6563994394b0caa9..2b487d4797bd74057a9ad88148af199360d9de1d 100644 (file)
@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
        struct hc_driver        *driver;
        struct usb_hcd          *hcd;
        int                     retval;
+       int                     hcd_irq = 0;
 
        if (usb_disabled())
                return -ENODEV;
@@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
                return -ENODEV;
        dev->current_state = PCI_D0;
 
-       /* The xHCI driver supports MSI and MSI-X,
-        * so don't fail if the BIOS doesn't provide a legacy IRQ.
+       /*
+        * The xHCI driver has its own irq management
+        * make sure irq setup is not touched for xhci in generic hcd code
         */
-       if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
-               dev_err(&dev->dev,
-                       "Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
-                       pci_name(dev));
-               retval = -ENODEV;
-               goto disable_pci;
+       if ((driver->flags & HCD_MASK) != HCD_USB3) {
+               if (!dev->irq) {
+                       dev_err(&dev->dev,
+                       "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+                               pci_name(dev));
+                       retval = -ENODEV;
+                       goto disable_pci;
+               }
+               hcd_irq = dev->irq;
        }
 
        hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
@@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
        pci_set_master(dev);
 
-       retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+       retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
        if (retval != 0)
                goto unmap_registers;
        set_hs_companion(dev, hcd);
index f1f01a834ba792cee0935c5ffb9373d53fb368bd..849470b188313ece555d4a9c20aa9e70bb92ff2a 100644 (file)
@@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
         * generate interrupts.  Don't even try to enable MSI.
         */
        if (xhci->quirks & XHCI_BROKEN_MSI)
-               return 0;
+               goto legacy_irq;
 
        /* unregister the legacy interrupt */
        if (hcd->irq)
@@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
                return -EINVAL;
        }
 
+ legacy_irq:
        /* fall back to legacy interrupt*/
        ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
                        hcd->irq_descr, hcd);