smsc9420: add ethtool eeprom support
authorSteve Glendinning <steve.glendinning@smsc.com>
Sat, 13 Dec 2008 06:32:22 +0000 (22:32 -0800)
committerDavid S. Miller <davem@davemloft.net>
Sat, 13 Dec 2008 06:32:22 +0000 (22:32 -0800)
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/smsc9420.c
drivers/net/smsc9420.h

index 80dab8bea76c990c5cb7ea7f739578ac2deed0f8..2a8e9b71de927ee57ce01223a891f2a02ac516b2 100644 (file)
@@ -293,6 +293,124 @@ static int smsc9420_ethtool_nway_reset(struct net_device *netdev)
        return phy_start_aneg(pd->phy_dev);
 }
 
+static void smsc9420_eeprom_enable_access(struct smsc9420_pdata *pd)
+{
+       unsigned int temp = smsc9420_reg_read(pd, GPIO_CFG);
+       temp &= ~GPIO_CFG_EEPR_EN_;
+       smsc9420_reg_write(pd, GPIO_CFG, temp);
+       msleep(1);
+}
+
+static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
+{
+       int timeout = 100;
+       u32 e2cmd;
+
+       smsc_dbg(HW, "op 0x%08x", op);
+       if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+               smsc_warn(HW, "Busy at start");
+               return -EBUSY;
+       }
+
+       e2cmd = op | E2P_CMD_EPC_BUSY_;
+       smsc9420_reg_write(pd, E2P_CMD, e2cmd);
+
+       do {
+               msleep(1);
+               e2cmd = smsc9420_reg_read(pd, E2P_CMD);
+       } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+
+       if (!timeout) {
+               smsc_info(HW, "TIMED OUT");
+               return -EAGAIN;
+       }
+
+       if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
+               smsc_info(HW, "Error occured during eeprom operation");
+               return -EINVAL;
+       }
+
+       return 0;
+}
+
+static int smsc9420_eeprom_read_location(struct smsc9420_pdata *pd,
+                                        u8 address, u8 *data)
+{
+       u32 op = E2P_CMD_EPC_CMD_READ_ | address;
+       int ret;
+
+       smsc_dbg(HW, "address 0x%x", address);
+       ret = smsc9420_eeprom_send_cmd(pd, op);
+
+       if (!ret)
+               data[address] = smsc9420_reg_read(pd, E2P_DATA);
+
+       return ret;
+}
+
+static int smsc9420_eeprom_write_location(struct smsc9420_pdata *pd,
+                                         u8 address, u8 data)
+{
+       u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
+       int ret;
+
+       smsc_dbg(HW, "address 0x%x, data 0x%x", address, data);
+       ret = smsc9420_eeprom_send_cmd(pd, op);
+
+       if (!ret) {
+               op = E2P_CMD_EPC_CMD_WRITE_ | address;
+               smsc9420_reg_write(pd, E2P_DATA, (u32)data);
+               ret = smsc9420_eeprom_send_cmd(pd, op);
+       }
+
+       return ret;
+}
+
+static int smsc9420_ethtool_get_eeprom_len(struct net_device *dev)
+{
+       return SMSC9420_EEPROM_SIZE;
+}
+
+static int smsc9420_ethtool_get_eeprom(struct net_device *dev,
+                                      struct ethtool_eeprom *eeprom, u8 *data)
+{
+       struct smsc9420_pdata *pd = netdev_priv(dev);
+       u8 eeprom_data[SMSC9420_EEPROM_SIZE];
+       int len, i;
+
+       smsc9420_eeprom_enable_access(pd);
+
+       len = min(eeprom->len, SMSC9420_EEPROM_SIZE);
+       for (i = 0; i < len; i++) {
+               int ret = smsc9420_eeprom_read_location(pd, i, eeprom_data);
+               if (ret < 0) {
+                       eeprom->len = 0;
+                       return ret;
+               }
+       }
+
+       memcpy(data, &eeprom_data[eeprom->offset], len);
+       eeprom->len = len;
+       return 0;
+}
+
+static int smsc9420_ethtool_set_eeprom(struct net_device *dev,
+                                      struct ethtool_eeprom *eeprom, u8 *data)
+{
+       struct smsc9420_pdata *pd = netdev_priv(dev);
+       int ret;
+
+       smsc9420_eeprom_enable_access(pd);
+       smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
+       ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
+       smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWDS_);
+
+       /* Single byte write, according to man page */
+       eeprom->len = 1;
+
+       return ret;
+}
+
 static const struct ethtool_ops smsc9420_ethtool_ops = {
        .get_settings = smsc9420_ethtool_get_settings,
        .set_settings = smsc9420_ethtool_set_settings,
@@ -301,6 +419,9 @@ static const struct ethtool_ops smsc9420_ethtool_ops = {
        .set_msglevel = smsc9420_ethtool_set_msglevel,
        .nway_reset = smsc9420_ethtool_nway_reset,
        .get_link = ethtool_op_get_link,
+       .get_eeprom_len = smsc9420_ethtool_get_eeprom_len,
+       .get_eeprom = smsc9420_ethtool_get_eeprom,
+       .set_eeprom = smsc9420_ethtool_set_eeprom,
 };
 
 /* Sets the device MAC address to dev_addr */
index afda2d249eb6e774cad8ce254885e39521490246..80c426dc43251f3119f2f6f8170f586f123486f2 100644 (file)
@@ -43,6 +43,8 @@
 
 #define LAN_REGISTER_EXTENT            (0x400)
 
+#define SMSC9420_EEPROM_SIZE           ((u32)11)
+
 #define FLOW_CTRL_TX                   (1)
 #define FLOW_CTRL_RX                   (2)
 
 #define GPIO_CFG_LED_3_                        (0x40000000)
 #define GPIO_CFG_LED_2_                        (0x20000000)
 #define GPIO_CFG_LED_1_                        (0x10000000)
+#define GPIO_CFG_EEPR_EN_              (0x00700000)
 
 #define GPT_CFG                                (0xD4)
 #define GPT_CFG_TIMER_EN_              (0x20000000)