[PATCH] Support 100 MHz frequency transitions

Future versions of the Opteron processor may support
frequency transitions of 100 MHz, instead of the=20
current 200 MHz.  This patch enables the powernow-k8
driver to transition to an odd FID code, indicating
a multiple of 100 MHz frequency.

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 349782736808d6625170b13140d97121cfb756d5..a342b32c084333961ca4299135d8f2a908bf8bce 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -45,7 +45,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.5"
+#define VERSION "version 1.60.0"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -336,7 +336,7 @@ static int core_voltage_pre_transition(struct powernow_k8_data *data, u32 reqvid
 /* Phase 2 - core frequency transition */
 static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
 {
-       u32 vcoreqfid, vcocurrfid, vcofiddiff, savevid = data->currvid;
+       u32 vcoreqfid, vcocurrfid, vcofiddiff, fid_interval, savevid = data->currvid;
 
        if ((reqfid < HI_FID_TABLE_BOTTOM) && (data->currfid < HI_FID_TABLE_BOTTOM)) {
                printk(KERN_ERR PFX "ph2: illegal lo-lo transition 0x%x 0x%x\n",
@@ -359,9 +359,11 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
            : vcoreqfid - vcocurrfid;
 
        while (vcofiddiff > 2) {
+               (data->currfid & 1) ? (fid_interval = 1) : (fid_interval = 2);
+
                if (reqfid > data->currfid) {
                        if (data->currfid > LO_FID_TABLE_TOP) {
-                               if (write_new_fid(data, data->currfid + 2)) {
+                               if (write_new_fid(data, data->currfid + fid_interval)) {
                                        return 1;
                                }
                        } else {
@@ -371,7 +373,7 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid)
                                }
                        }
                } else {
-                       if (write_new_fid(data, data->currfid - 2))
+                       if (write_new_fid(data, data->currfid - fid_interval))
                                return 1;
                }
 
@@ -474,7 +476,7 @@ static int check_supported_cpu(unsigned int cpu)
        eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
        if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
            ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
-           ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
+           ((eax & CPUID_XMOD) > CPUID_XMOD_REV_G)) {
                printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
                goto out;
        }
@@ -521,10 +523,6 @@ static int check_pst_table(struct powernow_k8_data *data, struct pst_s *pst, u8
                        printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
                        return -ENODEV;
                }
-               if (pst[j].fid & 1) {
-                       printk(KERN_ERR BFX "fid invalid - %d : 0x%x\n", j, pst[j].fid);
-                       return -EINVAL;
-               }
                if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
                        /* Only first fid is allowed to be in "low" range */
                        printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
@@ -1177,4 +1175,3 @@ MODULE_LICENSE("GPL");
 
 late_initcall(powernowk8_init);
 module_exit(powernowk8_exit);
-

diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
index b1e85bb36396578fe8402dd2365277b32fb6e7e0..d0de37d58e9a2abe2839dd57206e5598745c54e0 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.h
@@ -42,7 +42,7 @@ struct powernow_k8_data {
 #define CPUID_XFAM                     0x0ff00000      /* extended family */
 #define CPUID_XFAM_K8                  0
 #define CPUID_XMOD                     0x000f0000      /* extended model */
-#define CPUID_XMOD_REV_F               0x00040000
+#define CPUID_XMOD_REV_G               0x00060000
 #define CPUID_USE_XFAM_XMOD            0x00000f00
 #define CPUID_GET_MAX_CAPABILITIES     0x80000000
 #define CPUID_FREQ_VOLT_CAPABILITIES   0x80000007
@@ -86,13 +86,14 @@ struct powernow_k8_data {
  *   low fid table
  * - lowest entry in the high fid table must be a <= 200MHz + 2 * the entry
  *   in the low fid table
- * - the parts can only step at 200 MHz intervals, so 1.9 GHz is never valid
+ * - the parts can only step at <= 200 MHz intervals, odd fid values are
+ *   supported in revision G and later revisions.
  * - lowest frequency must be >= interprocessor hypertransport link speed
  *   (only applies to MP systems obviously)
  */
 
 /* fids (frequency identifiers) are arranged in 2 tables - lo and hi */
-#define LO_FID_TABLE_TOP     6 /* fid values marking the boundary    */
+#define LO_FID_TABLE_TOP     7 /* fid values marking the boundary    */
 #define HI_FID_TABLE_BOTTOM  8 /* between the low and high tables    */
 
 #define LO_VCOFREQ_TABLE_TOP    1400   /* corresponding vco frequency values */
@@ -106,7 +107,7 @@ struct powernow_k8_data {
 #define MIN_FREQ 800   /* Min and max freqs, per spec */
 #define MAX_FREQ 5000
 
-#define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
+#define INVALID_FID_MASK 0xffffffc0  /* not a valid fid if these bits are set */
 #define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
 
 #define VID_OFF 0x3f