cypress_m8: use appropriate URB polling interval
authorMike Isely <isely@pobox.com>
Wed, 30 Aug 2006 03:06:59 +0000 (22:06 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Wed, 27 Sep 2006 18:58:58 +0000 (11:58 -0700)
The polling interval for the device can't always be 1msec.  If it is
too quick, the device can fail causing a fatal (to the driver) EILSEQ
error from the USB core.  The actual correct value is reported by the
device as part of its configuration data, so use that value as the
default.  On a DeLorme Earthmate for example, the device reports that
it wants a 6msec interval.  As part of this fix, the "interval" module
option has been fixed as well; the device's default can be overridden
by specifying interval=<value> as a module option.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/serial/cypress_m8.c

index ee70fddcab6031a8f1c045da4e71c09b3c4d1f9b..40cfbe1d351764dcdab80a680fad1fdf42fd0b76 100644 (file)
@@ -129,6 +129,8 @@ struct cypress_private {
        int cmd_ctrl;                      /* always set this to 1 before issuing a command */
        struct cypress_buf *buf;           /* write buffer */
        int write_urb_in_use;              /* write urb in use indicator */
+       int write_urb_interval;            /* interval to use for write urb */
+       int read_urb_interval;             /* interval to use for read urb */
        int termios_initialized;
        __u8 line_control;                 /* holds dtr / rts value */
        __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
@@ -472,8 +474,9 @@ static unsigned rate_to_mask (int rate)
 static int generic_startup (struct usb_serial *serial)
 {
        struct cypress_private *priv;
+       struct usb_serial_port *port = serial->port[0];
 
-       dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
+       dbg("%s - port %d", __FUNCTION__, port->number);
 
        priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
        if (!priv)
@@ -489,13 +492,24 @@ static int generic_startup (struct usb_serial *serial)
        
        usb_reset_configuration (serial->dev);
        
-       interval = 1;
        priv->cmd_ctrl = 0;
        priv->line_control = 0;
        priv->termios_initialized = 0;
        priv->rx_flags = 0;
        priv->cbr_mask = B300;
-       usb_set_serial_port_data(serial->port[0], priv);
+       if (interval > 0) {
+               priv->write_urb_interval = interval;
+               priv->read_urb_interval = interval;
+               dbg("%s - port %d read & write intervals forced to %d",
+                   __FUNCTION__,port->number,interval);
+       } else {
+               priv->write_urb_interval = port->interrupt_out_urb->interval;
+               priv->read_urb_interval = port->interrupt_in_urb->interval;
+               dbg("%s - port %d intervals: read=%d write=%d",
+                   __FUNCTION__,port->number,
+                   priv->read_urb_interval,priv->write_urb_interval);
+       }
+       usb_set_serial_port_data(port, priv);
        
        return 0;
 }
@@ -624,7 +638,7 @@ static int cypress_open (struct usb_serial_port *port, struct file *filp)
        usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
                usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
                port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
-               cypress_read_int_callback, port, interval);
+               cypress_read_int_callback, port, priv->read_urb_interval);
        result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 
        if (result){
@@ -808,7 +822,7 @@ send:
 
        port->interrupt_out_urb->transfer_buffer_length = actual_size;
        port->interrupt_out_urb->dev = port->serial->dev;
-       port->interrupt_out_urb->interval = interval;
+       port->interrupt_out_urb->interval = priv->write_urb_interval;
        result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
        if (result) {
                dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
@@ -1349,7 +1363,7 @@ continue_read:
                                        port->interrupt_in_endpointAddress),
                                port->interrupt_in_urb->transfer_buffer,
                                port->interrupt_in_urb->transfer_buffer_length,
-                               cypress_read_int_callback, port, interval);
+                               cypress_read_int_callback, port, priv->read_urb_interval);
                result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
                if (result)
                        dev_err(&urb->dev->dev, "%s - failed resubmitting "