When probing the chip, the driver identifies which PMBus registers are
supported, and determines available sensors from this information.
-Attribute files only exist if respective sensors are suported by the chip.
+Attribute files only exist if respective sensors are supported by the chip.
Labels are provided to inform the user about the sensor associated with
a given sysfs entry.
values used by the windows driver. A tool to do this is available
from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
does'nt work with bt878 boards according to some reports I received.
-Another one with bt878 suport is available from
+Another one with bt878 support is available from
http://btwincap.sourceforge.net/Files/btspy2.00.zip
You might also dig around in the *.ini files of the Windows applications.
static void __devinit tc35815_fixup(struct pci_dev *dev)
{
- /* This device may have PM registers but not they are not suported. */
+ /* This device may have PM registers but not they are not supported. */
if (dev->pm_cap) {
dev_info(&dev->dev, "PM disabled\n");
dev->pm_cap = 0;
unsigned long mmcra;
#ifdef CONFIG_OPROFILE_CELL
/* Register for oprofile user tool to check cell kernel profiling
- * suport.
+ * support.
*/
unsigned long cell_support;
#endif
/*
- * Data Technology Inc. ESPT-GIGA board suport
+ * Data Technology Inc. ESPT-GIGA board support
*
* Copyright (C) 2008, 2009 Renesas Solutions Corp.
* Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
/******************************************************************************
*
- * Module Name: dsopcode - Dispatcher suport for regions and fields
+ * Module Name: dsopcode - Dispatcher support for regions and fields
*
*****************************************************************************/
struct delayed_work ad_work;
struct delayed_work mcast_work;
#ifdef CONFIG_DEBUG_FS
- /* debugging suport via debugfs */
+ /* debugging support via debugfs */
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
};
if (o->next_tx_only >= o->max_cos)
/* >= becuase tx only must always be smaller than cos since the
- * primary connection suports COS 0
+ * primary connection supports COS 0
*/
BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
o->next_tx_only, o->max_cos);
/*
* This enables fast aging in the KSZ8842 switch. Not sure what situation
* needs that. However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
*/
static int fast_aging;
ssid_el_p[1] = priv->SSID_size;
memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
- ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
IPW_ORD_POWER_MGMT_MODE, // Power mode - 0=CAM, 1=PSP
IPW_ORD_POWER_MGMT_INDEX, //NS //
IPW_ORD_COUNTRY_CODE, // IEEE country code as recv'd from beacon
- IPW_ORD_COUNTRY_CHANNELS, // channels suported by country
+ IPW_ORD_COUNTRY_CHANNELS, // channels supported by country
// IPW_ORD_COUNTRY_CHANNELS:
// For 11b the lower 2-byte are used for channels from 1-14
// and the higher 2-byte are not used.
/*
* read and store the RANGE bit for later use
* This must be done before regulator is probed otherwise
- * we error in probe with unsuportable ranges.
+ * we error in probe with unsupportable ranges.
*/
if (id != PALMAS_REG_SMPS10) {
addr = palmas_regs_info[id].vsel_addr;
* @dev:domain device to be detect.
* @src_dev: the device which originated BROADCAST(CHANGE).
*
- * Add self-configuration expander suport. Suppose two expander cascading,
+ * Add self-configuration expander support. Suppose two expander cascading,
* when the first level expander is self-configuring, hotplug the disks in
* second level expander, BROADCAST(CHANGE) will not only be originated
* in the second level expander, but also be originated in the first level
* And loads of cleaning up, in particular streamlining the
* bulk transfers.
* 1.1: moved EP4 transfers to EP1 to make space for a PWM output on EP4
- * 1.2: added PWM suport via EP4
+ * 1.2: added PWM support via EP4
* 2.0: PWM seems to be stable and is not interfering with the other functions
* 2.1: changed PWM API
* 2.2: added firmware kernel request to fix an udev problem
#include <net/pkt_sched.h>
-/* Wext handler is suported only if CSR_SUPPORT_WEXT is defined */
+/* Wext handler is supported only if CSR_SUPPORT_WEXT is defined */
#ifdef CSR_SUPPORT_WEXT
extern struct iw_handler_def unifi_iw_handler_def;
#endif /* CSR_SUPPORT_WEXT */
case 4:
break;
default:
- /* alignment value not suportted */
+ /* alignment value not supportted */
status = -EPERM;
break;
}
/* TODO: Add real matching code */
/* The device should always appear to be in use
- * unless the driver suports autosuspend.
+ * unless the driver supports autosuspend.
*/
if (!udriver->supports_autosuspend)
error = usb_autoresume_device(udev);
Unicode on the wire.
nomapchars Do not translate any of these seven characters (default).
nocase Request case insensitive path name matching (case
- sensitive is the default if the server suports it).
+ sensitive is the default if the server supports it).
(mount option "ignorecase" is identical to "nocase")
posixpaths If CIFS Unix extensions are supported, attempt to
negotiate posix path name support which allows certain
select ANON_INODES
default n
---help---
- Say Y here to enable fanotify suport. fanotify is a file access
+ Say Y here to enable fanotify support. fanotify is a file access
notification system which differs from inotify in that it sends
an open file descriptor to the userspace listener along with
the event.
#define STMMAC_CSR_I_16 0xE /* clk_csr_i/16 */
#define STMMAC_CSR_I_18 0xF /* clk_csr_i/18 */
-/* AXI DMA Burst length suported */
+/* AXI DMA Burst length supported */
#define DMA_AXI_BLEN_4 (1 << 1)
#define DMA_AXI_BLEN_8 (1 << 2)
#define DMA_AXI_BLEN_16 (1 << 3)
/*
* Plugable TCP congestion control support and newReno
* congestion control.
- * Based on ideas from I/O scheduler suport and Web100.
+ * Based on ideas from I/O scheduler support and Web100.
*
* Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
*/
static inline int drv_tx_last_beacon(struct ieee80211_local *local)
{
- int ret = 0; /* default unsuported op for less congestion */
+ int ret = 0; /* default unsupported op for less congestion */
might_sleep();
list_add(&null_key->key_list, &ep->endpoint_shared_keys);
- /* Allocate and initialize transorms arrays for suported HMACs. */
+ /* Allocate and initialize transorms arrays for supported HMACs. */
err = sctp_auth_init_hmacs(ep, gfp);
if (err)
goto nomem_hmacs;
chunk->subh.auth_hdr = auth_hdr;
skb_pull(chunk->skb, sizeof(struct sctp_authhdr));
- /* Make sure that we suport the HMAC algorithm from the auth
+ /* Make sure that we support the HMAC algorithm from the auth
* chunk.
*/
if (!sctp_auth_asoc_verify_hmac_id(asoc, auth_hdr->hmac_id))
ice->num_total_dacs = 4; /* two AK4324 codecs */
break;
case ICE1712_SUBDEVICE_VX442:
- case ICE1712_SUBDEVICE_DELTA66E: /* omni not suported yet */
+ case ICE1712_SUBDEVICE_DELTA66E: /* omni not supported yet */
ice->num_total_dacs = 4;
ice->num_total_adcs = 4;
break;
projects / firefly-linux-kernel-4.4.55.git / commitdiff