ARM: dts: rockchip: Remove specific cts pullup from veyron

With the previous patch ("rk3288: pull up cts lines") this is redundant,
I sent that patch for the same reason this existed here, so the lines don't
wiggle randomly when disconnected.

Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 2fa7a0dc83f76b17e287c7fa4b385d778e2a74c5..2b5d2e2aa6063f10ebb1adca46b0e6eecc4e2b78 100644 (file)
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -543,18 +543,6 @@
                };
        };
 
-       /*
-        * On Marvell-based hardware this is a no-connect.  Make sure we enable
-        * the pullup so that the line doesn't float.  The pullup shouldn't
-        * hurt on Broadcom-based hardware since the other side is actively
-        * driving this signal.  As proof: we've already got a pullup on RX.
-        */
-       uart0 {
-               uart0_cts: uart0-cts {
-                       rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
-               };
-       };
-
        write-protect {
                fw_wp_ap: fw-wp-ap {
                        rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;