#include <media/soc_camera.h> /* ddl@rock-chips.com : camera support */
#include <mach/vpu_mem.h>
#include <mach/sram.h>
+#include <mach/ddr.h>
+#include <mach/cpufreq.h>
#include <linux/regulator/rk29-pwm-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/i2c-gpio.h>
#include "devices.h"
#include "../../../drivers/input/touchscreen/xpt2046_cbn_ts.h"
+#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Macro Define Begin ------------------------*/
+/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
+#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_0 0x78
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 1
+#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_0 RK29_PIN6_PB7
+#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_1 0x60
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 1
+#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
+#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
+#endif //#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Configuration Macro End------------------------*/
+#include "../../../drivers/media/video/rk29_camera.c"
+/*---------------- Camera Sensor Macro Define End ------------------------*/
/* Set memory size of pmem */
#ifdef CONFIG_RK29_MEM_SIZE_M
#define PMEM_GPU_SIZE SZ_64M
#define PMEM_UI_SIZE SZ_32M
#define PMEM_VPU_SIZE SZ_64M
-#define PMEM_CAM_SIZE 0x01300000
+#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
#ifdef CONFIG_VIDEO_RK29_WORK_IPP
#define MEM_CAMIPP_SIZE SZ_4M
#else
#else
#define MEM_FBIPP_SIZE 0
#endif
-#define PMEM_GPU_BASE ((u32)RK29_SDRAM_PHYS + SDRAM_SIZE - PMEM_GPU_SIZE)
+#if SDRAM_SIZE > SZ_512M
+#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SZ_512M - PMEM_GPU_SIZE)
+#else
+#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SDRAM_SIZE - PMEM_GPU_SIZE)
+#endif
#define PMEM_UI_BASE (PMEM_GPU_BASE - PMEM_UI_SIZE)
#define PMEM_VPU_BASE (PMEM_UI_BASE - PMEM_VPU_SIZE)
#define PMEM_CAM_BASE (PMEM_VPU_BASE - PMEM_CAM_SIZE)
.io_init = rk29_nand_io_init,
};
+#define TOUCH_SCREEN_STANDBY_PIN RK29_PIN6_PD1
+#define TOUCH_SCREEN_STANDBY_VALUE GPIO_HIGH
+#define TOUCH_SCREEN_DISPLAY_PIN INVALID_GPIO
+#define TOUCH_SCREEN_DISPLAY_VALUE GPIO_HIGH
#ifdef CONFIG_FB_RK29
/*****************************************************************************************
* lcd devices
* author: zyw@rock-chips.com
*****************************************************************************************/
#define FB_ID 0
-#define FB_DISPLAY_ON_PIN RK29_PIN6_PD0
+#define FB_DISPLAY_ON_PIN INVALID_GPIO// RK29_PIN6_PD0
#define FB_LCD_STANDBY_PIN INVALID_GPIO
#define FB_LCD_CABC_EN_PIN RK29_PIN6_PD2
#define FB_MCU_FMK_PIN INVALID_GPIO
#define FB_DISPLAY_ON_VALUE GPIO_HIGH
#define FB_LCD_STANDBY_VALUE GPIO_HIGH
-//#endif
-/*****************************************************************************************
-* touch screen devices
-* author: cf@rock-chips.com
-*****************************************************************************************/
-#define TOUCH_SCREEN_STANDBY_PIN RK29_PIN6_PD1
-#define TOUCH_SCREEN_STANDBY_VALUE GPIO_HIGH
-#define TOUCH_SCREEN_DISPLAY_PIN INVALID_GPIO
-#define TOUCH_SCREEN_DISPLAY_VALUE GPIO_HIGH
-
static int rk29_lcd_io_init(void)
{
int ret = 0;
.io_deinit = rk29_lcd_io_deinit,
};
+int rk29_fb_io_enable(void)
+{
+ if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
+ gpio_set_value(FB_DISPLAY_ON_PIN, FB_DISPLAY_ON_VALUE);
+ }
+ if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
+ gpio_set_value(FB_LCD_STANDBY_PIN, FB_LCD_STANDBY_VALUE);
+ }
+ return 0;
+}
+
+int rk29_fb_io_disable(void)
+{
+ if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
+ gpio_set_value(FB_DISPLAY_ON_PIN, !FB_DISPLAY_ON_VALUE);
+ }
+ if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
+ {
+ gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
+ gpio_set_value(FB_LCD_STANDBY_PIN, !FB_LCD_STANDBY_VALUE);
+ }
+ return 0;
+}
static int rk29_fb_io_init(struct rk29_fb_setting_info *fb_setting)
{
gpio_direction_output(FB_LCD_CABC_EN_PIN, 0);
gpio_set_value(FB_LCD_CABC_EN_PIN, GPIO_LOW);
}
+
+ rk29_fb_io_enable(); //enable it
return ret;
}
static struct rk29fb_info rk29_fb_info = {
.fb_id = FB_ID,
- .disp_on_pin = FB_DISPLAY_ON_PIN,
- .disp_on_value = FB_DISPLAY_ON_VALUE,
- .standby_pin = FB_LCD_STANDBY_PIN,
- .standby_value = FB_LCD_STANDBY_VALUE,
.mcu_fmk_pin = FB_MCU_FMK_PIN,
.lcd_info = &rk29_lcd_info,
.io_init = rk29_fb_io_init,
+ .io_enable = rk29_fb_io_enable,
+ .io_disable = rk29_fb_io_disable,
};
/* rk29 fb resource */
};
-static struct android_pmem_platform_data android_pmem_cam_pdata = {
- .name = "pmem_cam",
- .start = PMEM_CAM_BASE,
- .size = PMEM_CAM_SIZE,
- .no_allocator = 1,
- .cached = 1,
-};
-
-static struct platform_device android_pmem_cam_device = {
- .name = "android_pmem",
- .id = 1,
- .dev = {
- .platform_data = &android_pmem_cam_pdata,
- },
-};
-
-
static struct vpu_mem_platform_data vpu_mem_pdata = {
.name = "vpu_mem",
.start = PMEM_VPU_BASE,
.platform_data = &vpu_mem_pdata,
},
};
-
+#ifdef CONFIG_VIDEO_RK29XX_VOUT
static struct platform_device rk29_v4l2_output_devce = {
.name = "rk29_vout",
};
-
+#endif
/*HANNSTAR_P1003 touch*/
#if defined (CONFIG_HANNSTAR_P1003)
#define TOUCH_RESET_PIN RK29_PIN6_PC3
*****************************************************************************************/
static int rk29_i2c0_io_init(void)
{
+#ifdef CONFIG_RK29_I2C0_CONTROLLER
rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_I2C0_SCL);
rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_I2C0_SDA);
+#else
+ rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_GPIO2B7);
+ rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_GPIO2B6);
+#endif
return 0;
}
static int rk29_i2c1_io_init(void)
{
+#ifdef CONFIG_RK29_I2C1_CONTROLLER
rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_I2C1_SCL);
rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_I2C1_SDA);
+#else
+ rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_GPIO1A7);
+ rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_GPIO1A6);
+#endif
return 0;
}
static int rk29_i2c2_io_init(void)
{
+#ifdef CONFIG_RK29_I2C2_CONTROLLER
rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_I2C2_SCL);
rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_I2C2_SDA);
+#else
+ rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_GPIO5D4);
+ rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_GPIO5D3);
+#endif
return 0;
}
static int rk29_i2c3_io_init(void)
{
+#ifdef CONFIG_RK29_I2C3_CONTROLLER
rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_I2C3_SCL);
rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_I2C3_SDA);
+#else
+ rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_GPIO2B5);
+ rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_GPIO2B4);
+#endif
return 0;
}
-
+#ifdef CONFIG_RK29_I2C0_CONTROLLER
struct rk29_i2c_platform_data default_i2c0_data = {
.bus_num = 0,
.flags = 0,
.mode = I2C_MODE_IRQ,
.io_init = rk29_i2c0_io_init,
};
-
+#else
+struct i2c_gpio_platform_data default_i2c0_data = {
+ .sda_pin = RK29_PIN2_PB6,
+ .scl_pin = RK29_PIN2_PB7,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 0,
+ .io_init = rk29_i2c0_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C1_CONTROLLER
struct rk29_i2c_platform_data default_i2c1_data = {
.bus_num = 1,
.flags = 0,
.slave_addr = 0xff,
.scl_rate = 400*1000,
- .mode = I2C_MODE_POLL,
+ .mode = I2C_MODE_IRQ,
.io_init = rk29_i2c1_io_init,
};
-
+#else
+struct i2c_gpio_platform_data default_i2c1_data = {
+ .sda_pin = RK29_PIN1_PA6,
+ .scl_pin = RK29_PIN1_PA7,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 1,
+ .io_init = rk29_i2c1_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C2_CONTROLLER
struct rk29_i2c_platform_data default_i2c2_data = {
.bus_num = 2,
.flags = 0,
.mode = I2C_MODE_IRQ,
.io_init = rk29_i2c2_io_init,
};
-
+#else
+struct i2c_gpio_platform_data default_i2c2_data = {
+ .sda_pin = RK29_PIN5_PD3,
+ .scl_pin = RK29_PIN5_PD4,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 2,
+ .io_init = rk29_i2c2_io_init,
+};
+#endif
+#ifdef CONFIG_RK29_I2C3_CONTROLLER
struct rk29_i2c_platform_data default_i2c3_data = {
.bus_num = 3,
.flags = 0,
.slave_addr = 0xff,
.scl_rate = 400*1000,
- .mode = I2C_MODE_POLL,
+ .mode = I2C_MODE_IRQ,
.io_init = rk29_i2c3_io_init,
};
-
+#else
+struct i2c_gpio_platform_data default_i2c3_data = {
+ .sda_pin = RK29_PIN5_PB5,
+ .scl_pin = RK29_PIN5_PB4,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(200),
+ .bus_num = 3,
+ .io_init = rk29_i2c3_io_init,
+};
+#endif
#ifdef CONFIG_I2C0_RK29
static struct i2c_board_info __initdata board_i2c0_devices[] = {
#if defined (CONFIG_RK1000_CONTROL)
* camera devices
* author: ddl@rock-chips.com
*****************************************************************************************/
-#ifdef CONFIG_VIDEO_RK29
-#define SENSOR_NAME_0 RK29_CAM_SENSOR_NAME_OV5642 /* back camera sensor */
-#define SENSOR_IIC_ADDR_0 0x78
-#define SENSOR_IIC_ADAPTER_ID_0 1
-#define SENSOR_POWER_PIN_0 INVALID_GPIO
-#define SENSOR_RESET_PIN_0 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_0 RK29_PIN6_PB7
-#define SENSOR_FALSH_PIN_0 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
-#define SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
-
-#define SENSOR_NAME_1 RK29_CAM_SENSOR_NAME_OV2659 /* front camera sensor */
-#define SENSOR_IIC_ADDR_1 0x60
-#define SENSOR_IIC_ADAPTER_ID_1 1
-#define SENSOR_POWER_PIN_1 INVALID_GPIO
-#define SENSOR_RESET_PIN_1 INVALID_GPIO
-#define SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
-#define SENSOR_FALSH_PIN_1 INVALID_GPIO
-#define SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
-#define SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
-#define SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
-#define SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
-
-static int rk29_sensor_io_init(void);
-static int rk29_sensor_io_deinit(int sensor);
-static int rk29_sensor_ioctrl(struct device *dev,enum rk29camera_ioctrl_cmd cmd,int on);
-
-static struct rk29camera_platform_data rk29_camera_platform_data = {
- .io_init = rk29_sensor_io_init,
- .io_deinit = rk29_sensor_io_deinit,
- .sensor_ioctrl = rk29_sensor_ioctrl,
- .gpio_res = {
- {
- .gpio_reset = SENSOR_RESET_PIN_0,
- .gpio_power = SENSOR_POWER_PIN_0,
- .gpio_powerdown = SENSOR_POWERDN_PIN_0,
- .gpio_flash = SENSOR_FALSH_PIN_0,
- .gpio_flag = (SENSOR_POWERACTIVE_LEVEL_0|SENSOR_RESETACTIVE_LEVEL_0|SENSOR_POWERDNACTIVE_LEVEL_0|SENSOR_FLASHACTIVE_LEVEL_0),
- .gpio_init = 0,
- .dev_name = SENSOR_NAME_0,
- }, {
- .gpio_reset = SENSOR_RESET_PIN_1,
- .gpio_power = SENSOR_POWER_PIN_1,
- .gpio_powerdown = SENSOR_POWERDN_PIN_1,
- .gpio_flash = SENSOR_FALSH_PIN_1,
- .gpio_flag = (SENSOR_POWERACTIVE_LEVEL_1|SENSOR_RESETACTIVE_LEVEL_1|SENSOR_POWERDNACTIVE_LEVEL_1|SENSOR_FLASHACTIVE_LEVEL_1),
- .gpio_init = 0,
- .dev_name = SENSOR_NAME_1,
- }
- },
- #ifdef CONFIG_VIDEO_RK29_WORK_IPP
- .meminfo = {
- .name = "camera_ipp_mem",
- .start = MEM_CAMIPP_BASE,
- .size = MEM_CAMIPP_SIZE,
- }
- #endif
-};
-
-static int rk29_sensor_io_init(void)
+#ifdef CONFIG_VIDEO_RK29
+#define CONFIG_SENSOR_POWER_IOCTL_USR 0
+#define CONFIG_SENSOR_RESET_IOCTL_USR 0
+#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
+#define CONFIG_SENSOR_FLASH_IOCTL_USR 0
+
+#if CONFIG_SENSOR_POWER_IOCTL_USR
+static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
{
- int ret = 0, i;
- unsigned int camera_reset = INVALID_GPIO, camera_power = INVALID_GPIO;
- unsigned int camera_powerdown = INVALID_GPIO, camera_flash = INVALID_GPIO;
- unsigned int camera_ioflag;
-
- for (i=0; i<2; i++) {
- camera_reset = rk29_camera_platform_data.gpio_res[i].gpio_reset;
- camera_power = rk29_camera_platform_data.gpio_res[i].gpio_power;
- camera_powerdown = rk29_camera_platform_data.gpio_res[i].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[i].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[i].gpio_flag;
- rk29_camera_platform_data.gpio_res[i].gpio_init = 0;
-
- if (camera_power != INVALID_GPIO) {
- ret = gpio_request(camera_power, "camera power");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_POWERACTIVE_MASK;
- gpio_set_value(camera_reset, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- gpio_direction_output(camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
-
- //printk("\n%s....power pin(%d) init success(0x%x) \n",__FUNCTION__,camera_power,(((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
-
- }
-
- if (camera_reset != INVALID_GPIO) {
- ret = gpio_request(camera_reset, "camera reset");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_RESETACTIVE_MASK;
- gpio_set_value(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- gpio_direction_output(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
-
- //printk("\n%s....reset pin(%d) init success(0x%x)\n",__FUNCTION__,camera_reset,((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
-
- }
-
- if (camera_powerdown != INVALID_GPIO) {
- ret = gpio_request(camera_powerdown, "camera powerdown");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_POWERDNACTIVE_MASK;
- gpio_set_value(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- gpio_direction_output(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
-
- //printk("\n%s....powerdown pin(%d) init success(0x%x) \n",__FUNCTION__,camera_powerdown,((camera_ioflag&RK29_CAM_POWERDNACTIVE_BITPOS)>>RK29_CAM_POWERDNACTIVE_BITPOS));
-
- }
-
- if (camera_flash != INVALID_GPIO) {
- ret = gpio_request(camera_flash, "camera flash");
- if (ret)
- goto sensor_io_int_loop_end;
- rk29_camera_platform_data.gpio_res[i].gpio_init |= RK29_CAM_FLASHACTIVE_MASK;
- gpio_set_value(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- gpio_direction_output(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
-
- //printk("\n%s....flash pin(%d) init success(0x%x) \n",__FUNCTION__,camera_flash,((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
-
- }
- continue;
-sensor_io_int_loop_end:
- rk29_sensor_io_deinit(i);
- continue;
- }
-
- return 0;
+ #error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
}
+#endif
-static int rk29_sensor_io_deinit(int sensor)
+#if CONFIG_SENSOR_RESET_IOCTL_USR
+static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on)
{
- unsigned int camera_reset = INVALID_GPIO, camera_power = INVALID_GPIO;
- unsigned int camera_powerdown = INVALID_GPIO, camera_flash = INVALID_GPIO;
-
- camera_reset = rk29_camera_platform_data.gpio_res[sensor].gpio_reset;
- camera_power = rk29_camera_platform_data.gpio_res[sensor].gpio_power;
- camera_powerdown = rk29_camera_platform_data.gpio_res[sensor].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[sensor].gpio_flash;
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_POWERACTIVE_MASK) {
- if (camera_power != INVALID_GPIO) {
- gpio_direction_input(camera_power);
- gpio_free(camera_power);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_RESETACTIVE_MASK) {
- if (camera_reset != INVALID_GPIO) {
- gpio_direction_input(camera_reset);
- gpio_free(camera_reset);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_POWERDNACTIVE_MASK) {
- if (camera_powerdown != INVALID_GPIO) {
- gpio_direction_input(camera_powerdown);
- gpio_free(camera_powerdown);
- }
- }
-
- if (rk29_camera_platform_data.gpio_res[sensor].gpio_init & RK29_CAM_FLASHACTIVE_MASK) {
- if (camera_flash != INVALID_GPIO) {
- gpio_direction_input(camera_flash);
- gpio_free(camera_flash);
- }
- }
-
- rk29_camera_platform_data.gpio_res[sensor].gpio_init = 0;
- return 0;
+ #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
}
-static int rk29_sensor_ioctrl(struct device *dev,enum rk29camera_ioctrl_cmd cmd, int on)
-{
- unsigned int camera_power=INVALID_GPIO,camera_reset=INVALID_GPIO, camera_powerdown=INVALID_GPIO,camera_flash = INVALID_GPIO;
- unsigned int camera_ioflag,camera_io_init;
- int ret = RK29_CAM_IO_SUCCESS;
-
- if(rk29_camera_platform_data.gpio_res[0].dev_name && (strcmp(rk29_camera_platform_data.gpio_res[0].dev_name, dev_name(dev)) == 0)) {
- camera_power = rk29_camera_platform_data.gpio_res[0].gpio_power;
- camera_reset = rk29_camera_platform_data.gpio_res[0].gpio_reset;
- camera_powerdown = rk29_camera_platform_data.gpio_res[0].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[0].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[0].gpio_flag;
- camera_io_init = rk29_camera_platform_data.gpio_res[0].gpio_init;
- } else if (rk29_camera_platform_data.gpio_res[1].dev_name && (strcmp(rk29_camera_platform_data.gpio_res[1].dev_name, dev_name(dev)) == 0)) {
- camera_power = rk29_camera_platform_data.gpio_res[1].gpio_power;
- camera_reset = rk29_camera_platform_data.gpio_res[1].gpio_reset;
- camera_powerdown = rk29_camera_platform_data.gpio_res[1].gpio_powerdown;
- camera_flash = rk29_camera_platform_data.gpio_res[1].gpio_flash;
- camera_ioflag = rk29_camera_platform_data.gpio_res[1].gpio_flag;
- camera_io_init = rk29_camera_platform_data.gpio_res[1].gpio_init;
- }
-
- switch (cmd)
- {
- case Cam_Power:
- {
- if (camera_power != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_POWERACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_power, ((camera_ioflag&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- //printk("\n%s..%s..PowerPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_power, ((camera_ioflag&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- msleep(10);
- } else {
- gpio_set_value(camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- //printk("\n%s..%s..PowerPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_power, (((~camera_ioflag)&RK29_CAM_POWERACTIVE_MASK)>>RK29_CAM_POWERACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..PowerPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_reset);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
- case Cam_Reset:
- {
- if (camera_reset != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_RESETACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- //printk("\n%s..%s..ResetPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_reset, ((camera_ioflag&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- } else {
- gpio_set_value(camera_reset,(((~camera_ioflag)&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- //printk("\n%s..%s..ResetPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_reset, (((~camera_ioflag)&RK29_CAM_RESETACTIVE_MASK)>>RK29_CAM_RESETACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..ResetPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_reset);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
-
- case Cam_PowerDown:
- {
- if (camera_powerdown != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_POWERDNACTIVE_MASK) {
- if (on) {
- gpio_set_value(camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- //printk("\n%s..%s..PowerDownPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_powerdown, ((camera_ioflag&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- } else {
- gpio_set_value(camera_powerdown,(((~camera_ioflag)&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- //printk("\n%s..%s..PowerDownPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_powerdown, (((~camera_ioflag)&RK29_CAM_POWERDNACTIVE_MASK)>>RK29_CAM_POWERDNACTIVE_BITPOS));
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..PowerDownPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_powerdown);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
-
- case Cam_Flash:
- {
- if (camera_flash != INVALID_GPIO) {
- if (camera_io_init & RK29_CAM_FLASHACTIVE_MASK) {
- switch (on)
- {
- case Flash_Off:
- {
- gpio_set_value(camera_flash,(((~camera_ioflag)&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- //printk("\n%s..%s..FlashPin= %d..PinLevel = %x \n",__FUNCTION__,dev_name(dev), camera_flash, (((~camera_ioflag)&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- break;
- }
-
- case Flash_On:
- {
- gpio_set_value(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- //printk("\n%s..%s..FlashPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- break;
- }
-
- case Flash_Torch:
- {
- gpio_set_value(camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- //printk("\n%s..%s..FlashPin=%d ..PinLevel = %x \n",__FUNCTION__,dev_name(dev),camera_flash, ((camera_ioflag&RK29_CAM_FLASHACTIVE_MASK)>>RK29_CAM_FLASHACTIVE_BITPOS));
- break;
- }
-
- default:
- {
- printk("\n%s..%s..Flash command(%d) is invalidate \n",__FUNCTION__,dev_name(dev),on);
- break;
- }
- }
- } else {
- ret = RK29_CAM_EIO_REQUESTFAIL;
- printk("\n%s..%s..FlashPin=%d request failed!\n",__FUNCTION__,dev_name(dev),camera_flash);
- }
- } else {
- ret = RK29_CAM_EIO_INVALID;
- }
- break;
- }
+#endif
- default:
- {
- printk("%s cmd(0x%x) is unknown!\n",__FUNCTION__, cmd);
- break;
- }
- }
- return ret;
-}
-static int rk29_sensor_power(struct device *dev, int on)
+#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on)
{
- rk29_sensor_ioctrl(dev,Cam_Power,on);
- return 0;
-}
-static int rk29_sensor_reset(struct device *dev)
-{
- rk29_sensor_ioctrl(dev,Cam_Reset,1);
- msleep(2);
- rk29_sensor_ioctrl(dev,Cam_Reset,0);
- return 0;
+ #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
}
-static int rk29_sensor_powerdown(struct device *dev, int on)
+#endif
+
+#if CONFIG_SENSOR_FLASH_IOCTL_USR
+static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on)
{
- return rk29_sensor_ioctrl(dev,Cam_PowerDown,on);
+ #error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
}
-#if (SENSOR_IIC_ADDR_0 != 0x00)
-static struct i2c_board_info rk29_i2c_cam_info_0[] = {
- {
- I2C_BOARD_INFO(SENSOR_NAME_0, SENSOR_IIC_ADDR_0>>1)
- },
-};
-
-static struct soc_camera_link rk29_iclink_0 = {
- .bus_id = RK29_CAM_PLATFORM_DEV_ID,
- .power = rk29_sensor_power,
- .powerdown = rk29_sensor_powerdown,
- .board_info = &rk29_i2c_cam_info_0[0],
- .i2c_adapter_id = SENSOR_IIC_ADAPTER_ID_0,
- .module_name = SENSOR_NAME_0,
-};
-
-/*platform_device : soc-camera need */
-static struct platform_device rk29_soc_camera_pdrv_0 = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .init_name = SENSOR_NAME_0,
- .platform_data = &rk29_iclink_0,
- },
-};
#endif
-static struct i2c_board_info rk29_i2c_cam_info_1[] = {
- {
- I2C_BOARD_INFO(SENSOR_NAME_1, SENSOR_IIC_ADDR_1>>1)
- },
-};
-static struct soc_camera_link rk29_iclink_1 = {
- .bus_id = RK29_CAM_PLATFORM_DEV_ID,
- .power = rk29_sensor_power,
- .powerdown = rk29_sensor_powerdown,
- .board_info = &rk29_i2c_cam_info_1[0],
- .i2c_adapter_id = SENSOR_IIC_ADAPTER_ID_1,
- .module_name = SENSOR_NAME_1,
-};
+static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = {
+ #if CONFIG_SENSOR_POWER_IOCTL_USR
+ .sensor_power_cb = sensor_power_usr_cb,
+ #else
+ .sensor_power_cb = NULL,
+ #endif
-/*platform_device : soc-camera need */
-static struct platform_device rk29_soc_camera_pdrv_1 = {
- .name = "soc-camera-pdrv",
- .id = 1,
- .dev = {
- .init_name = SENSOR_NAME_1,
- .platform_data = &rk29_iclink_1,
- },
-};
+ #if CONFIG_SENSOR_RESET_IOCTL_USR
+ .sensor_reset_cb = sensor_reset_usr_cb,
+ #else
+ .sensor_reset_cb = NULL,
+ #endif
+ #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+ .sensor_powerdown_cb = sensor_powerdown_usr_cb,
+ #else
+ .sensor_powerdown_cb = NULL,
+ #endif
-static u64 rockchip_device_camera_dmamask = 0xffffffffUL;
-static struct resource rk29_camera_resource[] = {
- [0] = {
- .start = RK29_VIP_PHYS,
- .end = RK29_VIP_PHYS + RK29_VIP_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_VIP,
- .end = IRQ_VIP,
- .flags = IORESOURCE_IRQ,
- }
+ #if CONFIG_SENSOR_FLASH_IOCTL_USR
+ .sensor_flash_cb = sensor_flash_usr_cb,
+ #else
+ .sensor_flash_cb = NULL,
+ #endif
};
-/*platform_device : */
-static struct platform_device rk29_device_camera = {
- .name = RK29_CAM_DRV_NAME,
- .id = RK29_CAM_PLATFORM_DEV_ID, /* This is used to put cameras on this interface */
- .num_resources = ARRAY_SIZE(rk29_camera_resource),
- .resource = rk29_camera_resource,
- .dev = {
- .dma_mask = &rockchip_device_camera_dmamask,
- .coherent_dma_mask = 0xffffffffUL,
- .platform_data = &rk29_camera_platform_data,
- }
-};
+#include "../../../drivers/media/video/rk29_camera.c"
#endif
/*****************************************************************************************
* backlight devices
#define PWM_GPIO RK29_PIN1_PB5
#define PWM_EFFECT_VALUE 1
-//#define LCD_DISP_ON_PIN
+#define LCD_DISP_ON_PIN
#ifdef LCD_DISP_ON_PIN
-#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
-#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
+//#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
+//#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
-#define BL_EN_PIN GPIO0L_GPIO0A5
+#define BL_EN_PIN RK29_PIN6_PD0
#define BL_EN_VALUE GPIO_HIGH
#endif
static int rk29_backlight_io_init(void)
rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
#ifdef LCD_DISP_ON_PIN
- rk29_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
+ // rk29_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
ret = gpio_request(BL_EN_PIN, NULL);
if(ret != 0)
{
int ret = 0;
rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- if (ret = gpio_request(PWM_GPIO, NULL)) {
+ if (gpio_request(PWM_GPIO, NULL)) {
printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
return -1;
}
gpio_direction_output(PWM_GPIO, GPIO_LOW);
+ #ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, 0);
+ gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
+ #endif
return ret;
}
{
gpio_free(PWM_GPIO);
rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
+
+ #ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, 1);
+ gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
+ #endif
return 0;
}
rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
+
+#ifdef CONFIG_SDMMC_RK29_OLD
rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_GPIO2A2);
+#else
+ rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_SDMMC0_DETECT_N);//Modifyed by xbw.
+#endif
+
rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5); ///GPIO5H_SDMMC0_PWR_EN); ///GPIO5H_GPIO5D5);
gpio_request(RK29_PIN5_PD5,"sdmmc");
#if 0
#ifdef CONFIG_VIVANTE
+#define GPU_HIGH_CLOCK 552
+#define GPU_LOW_CLOCK (periph_pll_default / 1000000) /* same as general pll clock rate below */
static struct resource resources_gpu[] = {
[0] = {
.name = "gpu_irq",
.flags = IORESOURCE_IRQ,
},
[1] = {
- .name = "gpu_base",
+ .name = "gpu_base",
.start = RK29_GPU_PHYS,
- .end = RK29_GPU_PHYS + RK29_GPU_SIZE,
+ .end = RK29_GPU_PHYS + RK29_GPU_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
- .name = "gpu_mem",
+ .name = "gpu_mem",
.start = PMEM_GPU_BASE,
- .end = PMEM_GPU_BASE + PMEM_GPU_SIZE,
+ .end = PMEM_GPU_BASE + PMEM_GPU_SIZE - 1,
.flags = IORESOURCE_MEM,
},
+ [3] = {
+ .name = "gpu_clk",
+ .start = GPU_LOW_CLOCK,
+ .end = GPU_HIGH_CLOCK,
+ .flags = IORESOURCE_IO,
+ },
};
static struct platform_device rk29_device_gpu = {
.name = "galcore",
.resource = resources_gpu,
};
#endif
+
#ifdef CONFIG_KEYS_RK29
extern struct rk29_keys_platform_data rk29_keys_pdata;
static struct platform_device rk29_device_keys = {
}
static struct platform_device *devices[] __initdata = {
+
+#ifdef CONFIG_RK29_WATCHDOG
+ &rk29_device_wdt,
+#endif
+
#ifdef CONFIG_UART1_RK29
&rk29_device_uart1,
#endif
#endif
#ifdef CONFIG_VIDEO_RK29
&rk29_device_camera, /* ddl@rock-chips.com : camera support */
- #if (SENSOR_IIC_ADDR_0 != 0x00)
+ #if (CONFIG_SENSOR_IIC_ADDR_0 != 0x00)
&rk29_soc_camera_pdrv_0,
#endif
&rk29_soc_camera_pdrv_1,
rk29_gpio_init();
}
+static struct cpufreq_frequency_table freq_table[] = {
+ { .index = 1200000, .frequency = 408000 },
+ { .index = 1200000, .frequency = 816000 },
+ { .index = 1300000, .frequency = 1008000 },
+ { .frequency = CPUFREQ_TABLE_END },
+};
+
static void __init machine_rk29_board_init(void)
{
rk29_board_iomux_init();
board_power_init();
+ board_update_cpufreq_table(freq_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
#ifdef CONFIG_I2C0_RK29
mi->bank[0].start = RK29_SDRAM_PHYS;
mi->bank[0].node = PHYS_TO_NID(RK29_SDRAM_PHYS);
mi->bank[0].size = LINUX_SIZE;
+#if SDRAM_SIZE > SZ_512M
+ mi->nr_banks = 2;
+ mi->bank[1].start = RK29_SDRAM_PHYS + SZ_512M;
+ mi->bank[1].size = SDRAM_SIZE - SZ_512M;
+#endif
}
static void __init machine_rk29_mapio(void)
rk29_map_common_io();
rk29_setup_early_printk();
rk29_sram_init();
- rk29_clock_init(periph_pll_288mhz);
+ rk29_clock_init(periph_pll_default);
rk29_iomux_init();
+ ddr_init(DDR_TYPE, DDR_FREQ);
}
MACHINE_START(RK29, "RK29board")
/* UART for LL DEBUG */
- .phys_io = RK29_UART1_PHYS,
+ .phys_io = RK29_UART1_PHYS & 0xfff00000,
.io_pg_offst = ((RK29_UART1_BASE) >> 18) & 0xfffc,
.boot_params = RK29_SDRAM_PHYS + 0x88000,
.fixup = machine_rk29_fixup,
projects / firefly-linux-kernel-4.4.55.git / commitdiff