net/ucc_geth: Add SGMII support for UEC GETH driver
authorHaiying Wang <Haiying.Wang@freescale.com>
Tue, 2 Jun 2009 04:04:15 +0000 (04:04 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 3 Jun 2009 09:52:47 +0000 (02:52 -0700)
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
arch/powerpc/include/asm/qe.h
drivers/net/ucc_geth.c
drivers/net/ucc_geth.h

index 2701753d9937513ee78b995893d8857da7710479..4459d20dc76a95d31e5c61b7bad34535c9314304 100644 (file)
@@ -668,6 +668,8 @@ struct ucc_slow_pram {
 #define UCC_GETH_UPSMR_RMM      0x00001000
 #define UCC_GETH_UPSMR_CAM      0x00000400
 #define UCC_GETH_UPSMR_BRO      0x00000200
+#define UCC_GETH_UPSMR_SMM     0x00000080
+#define UCC_GETH_UPSMR_SGMM    0x00000020
 
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD   0x8000
index 0cf22c4f123b888d1c42b1db10df05c571d7c64c..fd6140bd9aae581609dd245b6f706910a6a15777 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006-2007 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2009 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *        Li Yang <leoli@freescale.com>
@@ -65,6 +65,8 @@
 
 static DEFINE_SPINLOCK(ugeth_lock);
 
+static void uec_configure_serdes(struct net_device *dev);
+
 static struct {
        u32 msg_enable;
 } debug = { -1 };
@@ -1410,6 +1412,9 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
            (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
                upsmr |= UCC_GETH_UPSMR_TBIM;
        }
+       if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII))
+               upsmr |= UCC_GETH_UPSMR_SGMM;
+
        out_be32(&uf_regs->upsmr, upsmr);
 
        /* Disable autonegotiation in tbi mode, because by default it
@@ -1554,6 +1559,9 @@ static int init_phy(struct net_device *dev)
                return -ENODEV;
        }
 
+       if (priv->phy_interface == PHY_INTERFACE_MODE_SGMII)
+               uec_configure_serdes(dev);
+
        phydev->supported &= (ADVERTISED_10baseT_Half |
                                 ADVERTISED_10baseT_Full |
                                 ADVERTISED_100baseT_Half |
@@ -1569,7 +1577,41 @@ static int init_phy(struct net_device *dev)
        return 0;
 }
 
+/* Initialize TBI PHY interface for communicating with the
+ * SERDES lynx PHY on the chip.  We communicate with this PHY
+ * through the MDIO bus on each controller, treating it as a
+ * "normal" PHY at the address found in the UTBIPA register.  We assume
+ * that the UTBIPA register is valid.  Either the MDIO bus code will set
+ * it to a value that doesn't conflict with other PHYs on the bus, or the
+ * value doesn't matter, as there are no other PHYs on the bus.
+ */
+static void uec_configure_serdes(struct net_device *dev)
+{
+       struct ucc_geth_private *ugeth = netdev_priv(dev);
+
+       if (!ugeth->tbiphy) {
+               printk(KERN_WARNING "SGMII mode requires that the device "
+                       "tree specify a tbi-handle\n");
+       return;
+       }
+
+       /*
+        * If the link is already up, we must already be ok, and don't need to
+        * configure and reset the TBI<->SerDes link.  Maybe U-Boot configured
+        * everything for us?  Resetting it takes the link down and requires
+        * several seconds for it to come back.
+        */
+       if (phy_read(ugeth->tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+               return;
+
+       /* Single clk mode, mii mode off(for serdes communication) */
+       phy_write(ugeth->tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
 
+       phy_write(ugeth->tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
+
+       phy_write(ugeth->tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+
+}
 
 static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 {
@@ -3523,6 +3565,8 @@ static phy_interface_t to_phy_interface(const char *phy_connection_type)
                return PHY_INTERFACE_MODE_RGMII_RXID;
        if (strcasecmp(phy_connection_type, "rtbi") == 0)
                return PHY_INTERFACE_MODE_RTBI;
+       if (strcasecmp(phy_connection_type, "sgmii") == 0)
+               return PHY_INTERFACE_MODE_SGMII;
 
        return PHY_INTERFACE_MODE_MII;
 }
@@ -3567,6 +3611,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
                PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII,
                PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_RGMII,
                PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RTBI,
+               PHY_INTERFACE_MODE_SGMII,
        };
 
        ugeth_vdbg("%s: IN", __func__);
@@ -3682,6 +3727,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
                case PHY_INTERFACE_MODE_RGMII_TXID:
                case PHY_INTERFACE_MODE_TBI:
                case PHY_INTERFACE_MODE_RTBI:
+               case PHY_INTERFACE_MODE_SGMII:
                        max_speed = SPEED_1000;
                        break;
                default:
@@ -3756,6 +3802,37 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
        ugeth->ndev = dev;
        ugeth->node = np;
 
+       /* Find the TBI PHY.  If it's not there, we don't support SGMII */
+       ph = of_get_property(np, "tbi-handle", NULL);
+       if (ph) {
+               struct device_node *tbi = of_find_node_by_phandle(*ph);
+               struct of_device *ofdev;
+               struct mii_bus *bus;
+               const unsigned int *id;
+
+               if (!tbi)
+                       return 0;
+
+               mdio = of_get_parent(tbi);
+               if (!mdio)
+                       return 0;
+
+               ofdev = of_find_device_by_node(mdio);
+
+               of_node_put(mdio);
+
+               id = of_get_property(tbi, "reg", NULL);
+               if (!id)
+                       return 0;
+               of_node_put(tbi);
+
+               bus = dev_get_drvdata(&ofdev->dev);
+               if (!bus)
+                       return 0;
+
+               ugeth->tbiphy = bus->phy_map[*id];
+       }
+
        return 0;
 }
 
index dca628a922ba4dfbf668d99d06ddbb69c02cb0a7..deb962bb68efb135b20e54486cd43252cc9f62f8 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ * Copyright (C) Freescale Semicondutor, Inc. 2006-2009. All rights reserved.
  *
  * Author: Shlomi Gridish <gridish@freescale.com>
  *
@@ -193,6 +193,31 @@ struct ucc_geth {
 #define        ENET_TBI_MII_JD         0x10    /* Jitter diagnostics */
 #define        ENET_TBI_MII_TBICON     0x11    /* TBI control */
 
+/* TBI MDIO register bit fields*/
+#define TBISR_LSTATUS          0x0004
+#define TBICON_CLK_SELECT       0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE  0x0080
+#define TBIANA_HALF_DUPLEX      0x0040
+#define TBIANA_FULL_DUPLEX      0x0020
+#define TBICR_PHY_RESET         0x8000
+#define TBICR_ANEG_ENABLE       0x1000
+#define TBICR_RESTART_ANEG      0x0200
+#define TBICR_FULL_DUPLEX       0x0100
+#define TBICR_SPEED1_SET        0x0040
+
+#define TBIANA_SETTINGS ( \
+               TBIANA_ASYMMETRIC_PAUSE \
+               | TBIANA_SYMMETRIC_PAUSE \
+               | TBIANA_FULL_DUPLEX \
+               )
+#define TBICR_SETTINGS ( \
+               TBICR_PHY_RESET \
+               | TBICR_ANEG_ENABLE \
+               | TBICR_FULL_DUPLEX \
+               | TBICR_SPEED1_SET \
+               )
+
 /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
 #define MACCFG1_FLOW_RX                         0x00000020     /* Flow Control
                                                                   Rx */
@@ -1188,6 +1213,7 @@ struct ucc_geth_private {
 
        struct ugeth_mii_info *mii_info;
        struct phy_device *phydev;
+       struct phy_device *tbiphy;
        phy_interface_t phy_interface;
        int max_speed;
        uint32_t msg_enable;