[PATCH] CRIS update: console
authorMikael Starvik <mikael.starvik@axis.com>
Wed, 27 Jul 2005 18:44:31 +0000 (11:44 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Wed, 27 Jul 2005 23:25:59 +0000 (16:25 -0700)
Changes to console.

* Added LF->CRLF translation
* Make use of real console framework.

Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/cris/arch-v10/kernel/debugport.c

index 6cf069e5e7b64f0e06cea0a33dfb56bed2d74f00..f3a85b77c17e1c5b68596cf47d6e77587bfaa1bd 100644 (file)
  *    init_etrax_debug()
  *
  * $Log: debugport.c,v $
+ * Revision 1.27  2005/06/10 10:34:14  starvik
+ * Real console support
+ *
+ * Revision 1.26  2005/06/07 07:06:07  starvik
+ * Added LF->CR translation to make ETRAX customers happy.
+ *
+ * Revision 1.25  2005/03/08 08:56:47  mikaelam
+ * Do only set index as port->index if port is defined, otherwise use the index from the command line
+ *
+ * Revision 1.24  2005/01/19 10:26:33  mikaelam
+ * Return the cris serial driver in console device driver callback function
+ *
+ * Revision 1.23  2005/01/14 10:12:17  starvik
+ * KGDB on separate port.
+ * Console fixes from 2.4.
+ *
+ * Revision 1.22  2005/01/11 16:06:13  starvik
+ * typo
+ *
+ * Revision 1.21  2005/01/11 13:49:14  starvik
+ * Added raw_printk to be used where we don't trust the console.
+ *
+ * Revision 1.20  2004/12/27 11:18:32  starvik
+ * Merge of Linux 2.6.10 (not functional yet).
+ *
  * Revision 1.19  2004/10/21 07:26:16  starvik
  * Made it possible to specify console settings on kernel command line.
  *
@@ -114,7 +139,11 @@ struct dbg_port ports[]=
     R_SERIAL0_BAUD,
     R_SERIAL0_TR_CTRL,
     R_SERIAL0_REC_CTRL,
-    IO_STATE(R_IRQ_MASK1_SET, ser0_data, set)
+    IO_STATE(R_IRQ_MASK1_SET, ser0_data, set),
+    0,
+    115200,
+    'N',
+    8
   },
   {
     1,
@@ -124,7 +153,11 @@ struct dbg_port ports[]=
     R_SERIAL1_BAUD,
     R_SERIAL1_TR_CTRL,
     R_SERIAL1_REC_CTRL,
-    IO_STATE(R_IRQ_MASK1_SET, ser1_data, set)
+    IO_STATE(R_IRQ_MASK1_SET, ser1_data, set),
+    0,
+    115200,
+    'N',
+    8
   },
   {
     2,
@@ -134,7 +167,11 @@ struct dbg_port ports[]=
     R_SERIAL2_BAUD,
     R_SERIAL2_TR_CTRL,
     R_SERIAL2_REC_CTRL,
-    IO_STATE(R_IRQ_MASK1_SET, ser2_data, set)
+    IO_STATE(R_IRQ_MASK1_SET, ser2_data, set),
+    0,
+    115200,
+    'N',
+    8
   },
   {
     3,
@@ -144,11 +181,15 @@ struct dbg_port ports[]=
     R_SERIAL3_BAUD,
     R_SERIAL3_TR_CTRL,
     R_SERIAL3_REC_CTRL,
-    IO_STATE(R_IRQ_MASK1_SET, ser3_data, set)
+    IO_STATE(R_IRQ_MASK1_SET, ser3_data, set),
+    0,
+    115200,
+    'N',
+    8
   }
 };
 
-static struct tty_driver *serial_driver;
+extern struct tty_driver *serial_driver;
 
 struct dbg_port* port =
 #if defined(CONFIG_ETRAX_DEBUG_PORT0)
@@ -162,37 +203,44 @@ struct dbg_port* port =
 #else
   NULL;
 #endif
-/* Used by serial.c to register a debug_write_function so that the normal
- * serial driver is used for kernel debug output
- */
-typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
 
-debugport_write_function debug_write_function = NULL;
+static struct dbg_port* kgdb_port =
+#if defined(CONFIG_ETRAX_KGDB_PORT0)
+  &ports[0];
+#elif defined(CONFIG_ETRAX_KGDB_PORT1)
+  &ports[1];
+#elif defined(CONFIG_ETRAX_KGDB_PORT2)
+  &ports[2];
+#elif defined(CONFIG_ETRAX_KGDB_PORT3)
+  &ports[3];
+#else
+  NULL;
+#endif
 
 static void
-start_port(void)
+start_port(struct dbg_port* p)
 {
        unsigned long rec_ctrl = 0;
        unsigned long tr_ctrl = 0;
 
-       if (!port)
+       if (!p)
                return;
 
-       if (port->started)
+       if (p->started)
                return;
-       port->started = 1;
+       p->started = 1;
 
-       if (port->index == 0)
+       if (p->index == 0)
        {
                genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
                genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
        }
-       else if (port->index == 1)
+       else if (p->index == 1)
        {
                genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
                genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
        }
-       else if (port->index == 2)
+       else if (p->index == 2)
        {
                genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
                genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
@@ -211,69 +259,69 @@ start_port(void)
 
        *R_GEN_CONFIG = genconfig_shadow;
 
-       *port->xoff =
+       *p->xoff =
                IO_STATE(R_SERIAL0_XOFF, tx_stop, enable) |
                IO_STATE(R_SERIAL0_XOFF, auto_xoff, disable) |
                IO_FIELD(R_SERIAL0_XOFF, xoff_char, 0);
 
-       switch (port->baudrate)
+       switch (p->baudrate)
        {
        case 0:
        case 115200:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
                break;
        case 1200:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c1200Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c1200Hz);
                break;
        case 2400:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c2400Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c2400Hz);
                break;
        case 4800:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c4800Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c4800Hz);
                break;
        case 9600:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c9600Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c9600Hz);
                  break;
        case 19200:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c19k2Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c19k2Hz);
                 break;
        case 38400:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c38k4Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c38k4Hz);
                break;
        case 57600:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c57k6Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c57k6Hz);
                break;
        default:
-               *port->baud =
+               *p->baud =
                  IO_STATE(R_SERIAL0_BAUD, tr_baud, c115k2Hz) |
                  IO_STATE(R_SERIAL0_BAUD, rec_baud, c115k2Hz);
                  break;
         }
 
-       if (port->parity == 'E') {
+       if (p->parity == 'E') {
                rec_ctrl =
                  IO_STATE(R_SERIAL0_REC_CTRL, rec_par, even) |
                  IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
                tr_ctrl =
                  IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
                  IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
-       } else if (port->parity == 'O') {
+       } else if (p->parity == 'O') {
                rec_ctrl =
                  IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd) |
                  IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
@@ -288,8 +336,7 @@ start_port(void)
                  IO_STATE(R_SERIAL0_TR_CTRL, tr_par, even) |
                  IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, disable);
        }
-
-       if (port->bits == 7)
+       if (p->bits == 7)
        {
                rec_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
                tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
@@ -300,7 +347,7 @@ start_port(void)
                tr_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_8bit);
        }
 
-       *port->rec_ctrl =
+       *p->rec_ctrl =
                IO_STATE(R_SERIAL0_REC_CTRL, dma_err, stop) |
                IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable) |
                IO_STATE(R_SERIAL0_REC_CTRL, rts_, active) |
@@ -308,7 +355,7 @@ start_port(void)
                IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, normal) |
                rec_ctrl;
 
-       *port->tr_ctrl =
+       *p->tr_ctrl =
                IO_FIELD(R_SERIAL0_TR_CTRL, txd, 0) |
                IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable) |
                IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, disabled) |
@@ -323,8 +370,18 @@ console_write_direct(struct console *co, const char *buf, unsigned int len)
        int i;
        unsigned long flags;
        local_irq_save(flags);
+
+        if (!port)
+               return;
+
        /* Send data */
        for (i = 0; i < len; i++) {
+               /* LF -> CRLF */
+               if (buf[i] == '\n') {
+                       while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+                       ;
+                       *port->write = '\r';
+               }
                /* Wait until transmitter is ready and send.*/
                while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
                        ;
@@ -333,6 +390,25 @@ console_write_direct(struct console *co, const char *buf, unsigned int len)
        local_irq_restore(flags);
 }
 
+int raw_printk(const char *fmt, ...)
+{
+       static char buf[1024];
+       int printed_len;
+       static int first = 1;
+       if (first) {
+               /* Force reinitialization of the port to get manual mode. */
+               port->started = 0;
+               start_port(port);
+               first = 0;
+       }
+       va_list args;
+       va_start(args, fmt);
+       printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
+       va_end(args);
+       console_write_direct(NULL, buf, strlen(buf));
+       return printed_len;
+}
+
 static void
 console_write(struct console *co, const char *buf, unsigned int len)
 {
@@ -345,18 +421,7 @@ console_write(struct console *co, const char *buf, unsigned int len)
        return;
 #endif
 
-       start_port();
-
-#ifdef CONFIG_ETRAX_KGDB
-       /* kgdb needs to output debug info using the gdb protocol */
-       putDebugString(buf, len);
-       return;
-#endif
-
-       if (debug_write_function)
-               debug_write_function(co->index, buf, len);
-       else
-               console_write_direct(co, buf, len);
+        console_write_direct(co, buf, len);
 }
 
 /* legacy function */
@@ -374,8 +439,11 @@ getDebugChar(void)
 {
        unsigned long readval;
 
+       if (!kgdb_port)
+               return 0;
+
        do {
-               readval = *port->read;
+               readval = *kgdb_port->read;
        } while (!(readval & IO_MASK(R_SERIAL0_READ, data_avail)));
 
        return (readval & IO_MASK(R_SERIAL0_READ, data_in));
@@ -386,9 +454,12 @@ getDebugChar(void)
 void
 putDebugChar(int val)
 {
-       while (!(*port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
+       if (!kgdb_port)
+               return;
+
+       while (!(*kgdb_port->read & IO_MASK(R_SERIAL0_READ, tr_ready)))
                ;
-       *port->write = val;
+       *kgdb_port->write = val;
 }
 
 /* Enable irq for receiving chars on the debug port, used by kgdb */
@@ -396,19 +467,16 @@ putDebugChar(int val)
 void
 enableDebugIRQ(void)
 {
-       *R_IRQ_MASK1_SET = port->irq;
+       if (!kgdb_port)
+               return;
+
+       *R_IRQ_MASK1_SET = kgdb_port->irq;
        /* use R_VECT_MASK directly, since we really bypass Linux normal
         * IRQ handling in kgdb anyway, we don't need to use enable_irq
         */
        *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
 
-       *port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
-}
-
-static struct tty_driver*
-etrax_console_device(struct console* co, int *index)
-{
-       return serial_driver;
+       *kgdb_port->rec_ctrl = IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
 }
 
 static int __init
@@ -428,11 +496,69 @@ console_setup(struct console *co, char *options)
                if (*s) port->parity = *s++;
                if (*s) port->bits   = *s++ - '0';
                port->started = 0;
-               start_port();
+               start_port(0);
        }
        return 0;
 }
 
+/* This is a dummy serial device that throws away anything written to it.
+ * This is used when no debug output is wanted.
+ */
+static struct tty_driver dummy_driver;
+
+static int dummy_open(struct tty_struct *tty, struct file * filp)
+{
+       return 0;
+}
+
+static void dummy_close(struct tty_struct *tty, struct file * filp)
+{
+}
+
+static int dummy_write(struct tty_struct * tty,
+                       const unsigned char *buf, int count)
+{
+       return count;
+}
+
+static int
+dummy_write_room(struct tty_struct *tty)
+{
+       return 8192;
+}
+
+void __init
+init_dummy_console(void)
+{
+       memset(&dummy_driver, 0, sizeof(struct tty_driver));
+       dummy_driver.driver_name = "serial";
+       dummy_driver.name = "ttyS";
+       dummy_driver.major = TTY_MAJOR;
+       dummy_driver.minor_start = 68;
+       dummy_driver.num = 1;       /* etrax100 has 4 serial ports */
+       dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
+       dummy_driver.subtype = SERIAL_TYPE_NORMAL;
+       dummy_driver.init_termios = tty_std_termios;
+       dummy_driver.init_termios.c_cflag =
+               B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+       dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+
+       dummy_driver.open = dummy_open;
+       dummy_driver.close = dummy_close;
+       dummy_driver.write = dummy_write;
+       dummy_driver.write_room = dummy_write_room;
+       if (tty_register_driver(&dummy_driver))
+               panic("Couldn't register dummy serial driver\n");
+}
+
+static struct tty_driver*
+etrax_console_device(struct console* co, int *index)
+{
+       if (port)
+               *index = port->index;
+        return port ? serial_driver : &dummy_driver;
+}
+
 static struct console sercons = {
        name : "ttyS",
        write: console_write,
@@ -504,28 +630,21 @@ init_etrax_debug(void)
        static int first = 1;
 
        if (!first) {
-               if (!port) {
-                       register_console(&sercons0);
-                       register_console(&sercons1);
-                       register_console(&sercons2);
-                       register_console(&sercons3);
-                       unregister_console(&sercons);
-               }
+               unregister_console(&sercons);
+               register_console(&sercons0);
+               register_console(&sercons1);
+               register_console(&sercons2);
+               register_console(&sercons3);
+                init_dummy_console();
                return 0;
        }
-       first = 0;
-       if (port)
-               register_console(&sercons);
-       return 0;
-}
 
-int __init
-init_console(void)
-{
-       serial_driver = alloc_tty_driver(1);
-       if (!serial_driver)
-               return -ENOMEM;
+       first = 0;
+       register_console(&sercons);
+       start_port(port);
+#ifdef CONFIG_ETRAX_KGDB
+       start_port(kgdb_port);
+#endif
        return 0;
 }
-
 __initcall(init_etrax_debug);