pinctrl: sh-pfc: Do not overwrite bias configuration
authorGeert Uytterhoeven <geert+renesas@glider.be>
Fri, 27 Feb 2015 17:38:02 +0000 (18:38 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Mon, 9 Mar 2015 17:10:56 +0000 (18:10 +0100)
After the last user of the in_pd/in_pu bias parameters of the _PCRH()
macro was removed in commit 80da8e02d22caaef ("sh-pfc: r8a7740: Add bias
(pull-up/down) pinconf support"), bias parameters are supposed to be
configured using the generic pinctl mechanism, which calls the
.set_bias() method.

However, the PORTCR() macro still represents the control register as
consisting of two 4-bit fields. Hence the bias configuration in the
uppermost 2 bits is always overwritten with zeroes when a pin is
configured for GPIO, disabling any previously configured bias.

Use the variable config register macro instead, to represent the
register as having 4 fields, and to make sure only the input/output
control and function fields are touched.

This affects R-Mobile APE6 (r8a73a4), R-Mobile A1 (r8a7740), SH-Mobile
AP4 (sh7372), and SH-Mobile AG5 (sh73a0).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/sh-pfc/sh_pfc.h

index c83728626906c16c586954aa866aafa94ecf576b..ed5cf4192fa1a2d0390f49c8bcbdaaa0d0d66c5a 100644 (file)
@@ -302,20 +302,21 @@ struct sh_pfc_soc_info {
 /*
  * PORTnCR macro
  */
-#define _PCRH(in, in_pd, in_pu, out)   \
-       0, (out), (in), 0,              \
-       0, 0, 0, 0,                     \
-       0, 0, (in_pd), 0,               \
-       0, 0, (in_pu), 0
-
 #define PORTCR(nr, reg)                                                        \
        {                                                               \
-               PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {             \
-                       _PCRH(PORT##nr##_IN, 0, 0, PORT##nr##_OUT),     \
-                               PORT##nr##_FN0, PORT##nr##_FN1,         \
-                               PORT##nr##_FN2, PORT##nr##_FN3,         \
-                               PORT##nr##_FN4, PORT##nr##_FN5,         \
-                               PORT##nr##_FN6, PORT##nr##_FN7 }        \
+               PINMUX_CFG_REG_VAR("PORT" nr "CR", reg, 8, 2, 2, 1, 3) {\
+                       /* PULMD[1:0], handled by .set_bias() */        \
+                       0, 0, 0, 0,                                     \
+                       /* IE and OE */                                 \
+                       0, PORT##nr##_OUT, PORT##nr##_IN, 0,            \
+                       /* SEC, not supported */                        \
+                       0, 0,                                           \
+                       /* PTMD[2:0] */                                 \
+                       PORT##nr##_FN0, PORT##nr##_FN1,                 \
+                       PORT##nr##_FN2, PORT##nr##_FN3,                 \
+                       PORT##nr##_FN4, PORT##nr##_FN5,                 \
+                       PORT##nr##_FN6, PORT##nr##_FN7                  \
+               }                                                       \
        }
 
 #endif /* __SH_PFC_H */