floppy: convert to delayed work and single-thread wq
authorJiri Kosina <jkosina@suse.cz>
Fri, 18 May 2012 11:50:25 +0000 (13:50 +0200)
committerJiri Kosina <jkosina@suse.cz>
Fri, 18 May 2012 13:19:10 +0000 (15:19 +0200)
There are several races in floppy driver between bottom half
(scheduled_work) and timers (fd_timeout, fd_timer). Due to slowness
of the actual floppy devices, those races are never (at least to my
knowledge) triggered on a bare floppy metal. However on virtualized
(emulated) floppy drives, which are of course magnitudes faster
than the real ones, these races trigger reliably. They usually exhibit
themselves as NULL pointer dereferences during DMA setup, such as

BUG: unable to handle kernel NULL pointer dereference at 0000000a
[ ... snip ... ]
EIP: 0060:[<c02053d5>] EFLAGS: 00010293 CPU: 0
EAX: ffffe000 EBX: 0000000a ECX: 00000000 EDX: 0000000a
ESI: c05d2718 EDI: 00000000 EBP: 00000000 ESP: f540fe44
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=f540e000 task=c082d5a0 task.ti=c0826000)
Stack:
 ffffe000 00001ffc 00000000 00000000 00000000 c05d2718 c0708b40 f540fe80
 c020470f c05d2718 c0708b40 00000000 f540fe80 0000000a f540fee4 00000000
 c0708b40 f540fee4 00000000 00000000 c020526b 00000000 c05d2718 c0708b40
Call Trace:
 [<c020470f>] dump_trace+0xaf/0x110
 [<c020526b>] show_trace_log_lvl+0x4b/0x60
 [<c0205298>] show_trace+0x18/0x20
 [<c05c5811>] dump_stack+0x6d/0x72
 [<c0248527>] warn_slowpath_common+0x77/0xb0
 [<c02485f3>] warn_slowpath_fmt+0x33/0x40
 [<f7ec593c>] setup_DMA+0x14c/0x210 [floppy]
 [<f7ecaa95>] setup_rw_floppy+0x105/0x190 [floppy]
 [<c0256d08>] run_timer_softirq+0x168/0x2a0
 [<c024e762>] __do_softirq+0xc2/0x1c0
 [<c02042ed>] do_softirq+0x7d/0xb0
 [<f54d8a00>] 0xf54d89ff

but other instances can be easily seen as well. This can be observed at least under
VMWare, VirtualBox and KVM.

This patch converts all the timers and bottom halfs to be processed in a single
workqueue. This aproach has been already discussed back in 2010 if I remember
correctly, and Acked by Linus [1], but it then never made it to the tree.

This all is based on original idea and code of Stephen Hemminger.  I have
ported original Stepen's code to the current state of the floppy driver, and
performed quite some testing (on real hardware), which didn't reveal any issues
(this includes not only writing and reading data, but also formatting
(unfortunately I didn't find any Double-Density disks any more)). Ability to
handle errors properly (supplying known bad floppies) has also been verified.

[1] http://kerneltrap.org/mailarchive/linux-kernel/2010/6/11/4582092

Based-on-patch-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drivers/block/floppy.c

index b0b00d70c1669d6ef05993deb313dc516a23d552..48e1d70740dc76ad03e564127bc074dfc25f286e 100644 (file)
@@ -551,7 +551,7 @@ static void floppy_ready(void);
 static void floppy_start(void);
 static void process_fd_request(void);
 static void recalibrate_floppy(void);
-static void floppy_shutdown(unsigned long);
+static void floppy_shutdown(struct work_struct *);
 
 static int floppy_request_regions(int);
 static void floppy_release_regions(int);
@@ -588,6 +588,8 @@ static int buffer_max = -1;
 static struct floppy_fdc_state fdc_state[N_FDC];
 static int fdc;                        /* current fdc */
 
+static struct workqueue_struct *floppy_wq;
+
 static struct floppy_struct *_floppy = floppy_type;
 static unsigned char current_drive;
 static long current_count_sectors;
@@ -629,16 +631,15 @@ static inline void set_debugt(void) { }
 static inline void debugt(const char *func, const char *msg) { }
 #endif /* DEBUGT */
 
-typedef void (*timeout_fn)(unsigned long);
-static DEFINE_TIMER(fd_timeout, floppy_shutdown, 0, 0);
 
+static DECLARE_DELAYED_WORK(fd_timeout, floppy_shutdown);
 static const char *timeout_message;
 
 static void is_alive(const char *func, const char *message)
 {
        /* this routine checks whether the floppy driver is "alive" */
        if (test_bit(0, &fdc_busy) && command_status < 2 &&
-           !timer_pending(&fd_timeout)) {
+           !delayed_work_pending(&fd_timeout)) {
                DPRINT("%s: timeout handler died.  %s\n", func, message);
        }
 }
@@ -666,15 +667,18 @@ static int output_log_pos;
 
 static void __reschedule_timeout(int drive, const char *message)
 {
+       unsigned long delay;
+
        if (drive == current_reqD)
                drive = current_drive;
-       del_timer(&fd_timeout);
+
        if (drive < 0 || drive >= N_DRIVE) {
-               fd_timeout.expires = jiffies + 20UL * HZ;
+               delay = 20UL * HZ;
                drive = 0;
        } else
-               fd_timeout.expires = jiffies + UDP->timeout;
-       add_timer(&fd_timeout);
+               delay = UDP->timeout;
+
+       queue_delayed_work(floppy_wq, &fd_timeout, delay);
        if (UDP->flags & FD_DEBUG)
                DPRINT("reschedule timeout %s\n", message);
        timeout_message = message;
@@ -872,7 +876,7 @@ static int lock_fdc(int drive, bool interruptible)
 
        command_status = FD_COMMAND_NONE;
 
-       __reschedule_timeout(drive, "lock fdc");
+       reschedule_timeout(drive, "lock fdc");
        set_fdc(drive);
        return 0;
 }
@@ -880,23 +884,15 @@ static int lock_fdc(int drive, bool interruptible)
 /* unlocks the driver */
 static void unlock_fdc(void)
 {
-       unsigned long flags;
-
-       raw_cmd = NULL;
        if (!test_bit(0, &fdc_busy))
                DPRINT("FDC access conflict!\n");
 
-       if (do_floppy)
-               DPRINT("device interrupt still active at FDC release: %pf!\n",
-                      do_floppy);
+       raw_cmd = NULL;
        command_status = FD_COMMAND_NONE;
-       spin_lock_irqsave(&floppy_lock, flags);
-       del_timer(&fd_timeout);
+       __cancel_delayed_work(&fd_timeout);
+       do_floppy = NULL;
        cont = NULL;
        clear_bit(0, &fdc_busy);
-       if (current_req || set_next_request())
-               do_fd_request(current_req->q);
-       spin_unlock_irqrestore(&floppy_lock, flags);
        wake_up(&fdc_wait);
 }
 
@@ -968,26 +964,24 @@ static DECLARE_WORK(floppy_work, NULL);
 
 static void schedule_bh(void (*handler)(void))
 {
+       WARN_ON(work_pending(&floppy_work));
+
        PREPARE_WORK(&floppy_work, (work_func_t)handler);
-       schedule_work(&floppy_work);
+       queue_work(floppy_wq, &floppy_work);
 }
 
-static DEFINE_TIMER(fd_timer, NULL, 0, 0);
+static DECLARE_DELAYED_WORK(fd_timer, NULL);
 
 static void cancel_activity(void)
 {
-       unsigned long flags;
-
-       spin_lock_irqsave(&floppy_lock, flags);
        do_floppy = NULL;
-       PREPARE_WORK(&floppy_work, (work_func_t)empty);
-       del_timer(&fd_timer);
-       spin_unlock_irqrestore(&floppy_lock, flags);
+       cancel_delayed_work_sync(&fd_timer);
+       cancel_work_sync(&floppy_work);
 }
 
 /* this function makes sure that the disk stays in the drive during the
  * transfer */
-static void fd_watchdog(void)
+static void fd_watchdog(struct work_struct *arg)
 {
        debug_dcl(DP->flags, "calling disk change from watchdog\n");
 
@@ -997,21 +991,20 @@ static void fd_watchdog(void)
                cont->done(0);
                reset_fdc();
        } else {
-               del_timer(&fd_timer);
-               fd_timer.function = (timeout_fn)fd_watchdog;
-               fd_timer.expires = jiffies + HZ / 10;
-               add_timer(&fd_timer);
+               cancel_delayed_work(&fd_timer);
+               PREPARE_DELAYED_WORK(&fd_timer, fd_watchdog);
+               queue_delayed_work(floppy_wq, &fd_timer, HZ / 10);
        }
 }
 
 static void main_command_interrupt(void)
 {
-       del_timer(&fd_timer);
+       cancel_delayed_work(&fd_timer);
        cont->interrupt();
 }
 
 /* waits for a delay (spinup or select) to pass */
-static int fd_wait_for_completion(unsigned long delay, timeout_fn function)
+static int fd_wait_for_completion(unsigned long expires, work_func_t function)
 {
        if (FDCS->reset) {
                reset_fdc();    /* do the reset during sleep to win time
@@ -1020,11 +1013,10 @@ static int fd_wait_for_completion(unsigned long delay, timeout_fn function)
                return 1;
        }
 
-       if (time_before(jiffies, delay)) {
-               del_timer(&fd_timer);
-               fd_timer.function = function;
-               fd_timer.expires = delay;
-               add_timer(&fd_timer);
+       if (time_before(jiffies, expires)) {
+               cancel_delayed_work(&fd_timer);
+               PREPARE_DELAYED_WORK(&fd_timer, function);
+               queue_delayed_work(floppy_wq, &fd_timer, expires - jiffies);
                return 1;
        }
        return 0;
@@ -1342,7 +1334,7 @@ static int fdc_dtr(void)
         */
        FDCS->dtr = raw_cmd->rate & 3;
        return fd_wait_for_completion(jiffies + 2UL * HZ / 100,
-                                     (timeout_fn)floppy_ready);
+                                     (work_func_t)floppy_ready);
 }                              /* fdc_dtr */
 
 static void tell_sector(void)
@@ -1447,7 +1439,7 @@ static void setup_rw_floppy(void)
        int flags;
        int dflags;
        unsigned long ready_date;
-       timeout_fn function;
+       work_func_t function;
 
        flags = raw_cmd->flags;
        if (flags & (FD_RAW_READ | FD_RAW_WRITE))
@@ -1461,9 +1453,9 @@ static void setup_rw_floppy(void)
                 */
                if (time_after(ready_date, jiffies + DP->select_delay)) {
                        ready_date -= DP->select_delay;
-                       function = (timeout_fn)floppy_start;
+                       function = (work_func_t)floppy_start;
                } else
-                       function = (timeout_fn)setup_rw_floppy;
+                       function = (work_func_t)setup_rw_floppy;
 
                /* wait until the floppy is spinning fast enough */
                if (fd_wait_for_completion(ready_date, function))
@@ -1493,7 +1485,7 @@ static void setup_rw_floppy(void)
                inr = result();
                cont->interrupt();
        } else if (flags & FD_RAW_NEED_DISK)
-               fd_watchdog();
+               fd_watchdog(NULL);
 }
 
 static int blind_seek;
@@ -1802,20 +1794,22 @@ static void show_floppy(void)
                pr_info("do_floppy=%pf\n", do_floppy);
        if (work_pending(&floppy_work))
                pr_info("floppy_work.func=%pf\n", floppy_work.func);
-       if (timer_pending(&fd_timer))
-               pr_info("fd_timer.function=%pf\n", fd_timer.function);
-       if (timer_pending(&fd_timeout)) {
-               pr_info("timer_function=%pf\n", fd_timeout.function);
-               pr_info("expires=%lu\n", fd_timeout.expires - jiffies);
-               pr_info("now=%lu\n", jiffies);
-       }
+       if (delayed_work_pending(&fd_timer))
+               pr_info("delayed work.function=%p expires=%ld\n",
+                      fd_timer.work.func,
+                      fd_timer.timer.expires - jiffies);
+       if (delayed_work_pending(&fd_timeout))
+               pr_info("timer_function=%p expires=%ld\n",
+                      fd_timeout.work.func,
+                      fd_timeout.timer.expires - jiffies);
+
        pr_info("cont=%p\n", cont);
        pr_info("current_req=%p\n", current_req);
        pr_info("command_status=%d\n", command_status);
        pr_info("\n");
 }
 
-static void floppy_shutdown(unsigned long data)
+static void floppy_shutdown(struct work_struct *arg)
 {
        unsigned long flags;
 
@@ -1868,7 +1862,7 @@ static int start_motor(void (*function)(void))
 
        /* wait_for_completion also schedules reset if needed. */
        return fd_wait_for_completion(DRS->select_date + DP->select_delay,
-                                     (timeout_fn)function);
+                                     (work_func_t)function);
 }
 
 static void floppy_ready(void)
@@ -2821,7 +2815,6 @@ do_request:
                spin_lock_irq(&floppy_lock);
                pending = set_next_request();
                spin_unlock_irq(&floppy_lock);
-
                if (!pending) {
                        do_floppy = NULL;
                        unlock_fdc();
@@ -2898,13 +2891,15 @@ static void do_fd_request(struct request_queue *q)
                 current_req->cmd_flags))
                return;
 
-       if (test_bit(0, &fdc_busy)) {
+       if (test_and_set_bit(0, &fdc_busy)) {
                /* fdc busy, this new request will be treated when the
                   current one is done */
                is_alive(__func__, "old request running");
                return;
        }
-       lock_fdc(MAXTIMEOUT, false);
+       command_status = FD_COMMAND_NONE;
+       __reschedule_timeout(MAXTIMEOUT, "fd_request");
+       set_fdc(0);
        process_fd_request();
        is_alive(__func__, "");
 }
@@ -4159,10 +4154,16 @@ static int __init floppy_init(void)
                        goto out_put_disk;
                }
 
+               floppy_wq = alloc_ordered_workqueue("floppy", 0);
+               if (!floppy_wq) {
+                       err = -ENOMEM;
+                       goto out_put_disk;
+               }
+
                disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock);
                if (!disks[dr]->queue) {
                        err = -ENOMEM;
-                       goto out_put_disk;
+                       goto out_destroy_workq;
                }
 
                blk_queue_max_hw_sectors(disks[dr]->queue, 64);
@@ -4213,7 +4214,7 @@ static int __init floppy_init(void)
        use_virtual_dma = can_use_virtual_dma & 1;
        fdc_state[0].address = FDC1;
        if (fdc_state[0].address == -1) {
-               del_timer_sync(&fd_timeout);
+               cancel_delayed_work(&fd_timeout);
                err = -ENODEV;
                goto out_unreg_region;
        }
@@ -4224,7 +4225,7 @@ static int __init floppy_init(void)
        fdc = 0;                /* reset fdc in case of unexpected interrupt */
        err = floppy_grab_irq_and_dma();
        if (err) {
-               del_timer_sync(&fd_timeout);
+               cancel_delayed_work(&fd_timeout);
                err = -EBUSY;
                goto out_unreg_region;
        }
@@ -4281,13 +4282,13 @@ static int __init floppy_init(void)
                user_reset_fdc(-1, FD_RESET_ALWAYS, false);
        }
        fdc = 0;
-       del_timer_sync(&fd_timeout);
+       cancel_delayed_work(&fd_timeout);
        current_drive = 0;
        initialized = true;
        if (have_no_fdc) {
                DPRINT("no floppy controllers found\n");
                err = have_no_fdc;
-               goto out_flush_work;
+               goto out_release_dma;
        }
 
        for (drive = 0; drive < N_DRIVE; drive++) {
@@ -4302,7 +4303,7 @@ static int __init floppy_init(void)
 
                err = platform_device_register(&floppy_device[drive]);
                if (err)
-                       goto out_flush_work;
+                       goto out_release_dma;
 
                err = device_create_file(&floppy_device[drive].dev,
                                         &dev_attr_cmos);
@@ -4320,13 +4321,14 @@ static int __init floppy_init(void)
 
 out_unreg_platform_dev:
        platform_device_unregister(&floppy_device[drive]);
-out_flush_work:
-       flush_work_sync(&floppy_work);
+out_release_dma:
        if (atomic_read(&usage_count))
                floppy_release_irq_and_dma();
 out_unreg_region:
        blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
        platform_driver_unregister(&floppy_driver);
+out_destroy_workq:
+       destroy_workqueue(floppy_wq);
 out_unreg_blkdev:
        unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
@@ -4397,7 +4399,7 @@ static int floppy_grab_irq_and_dma(void)
         * We might have scheduled a free_irq(), wait it to
         * drain first:
         */
-       flush_work_sync(&floppy_work);
+       flush_workqueue(floppy_wq);
 
        if (fd_request_irq()) {
                DPRINT("Unable to grab IRQ%d for the floppy driver\n",
@@ -4488,9 +4490,9 @@ static void floppy_release_irq_and_dma(void)
                        pr_info("motor off timer %d still active\n", drive);
 #endif
 
-       if (timer_pending(&fd_timeout))
+       if (delayed_work_pending(&fd_timeout))
                pr_info("floppy timer still active:%s\n", timeout_message);
-       if (timer_pending(&fd_timer))
+       if (delayed_work_pending(&fd_timer))
                pr_info("auxiliary floppy timer still active\n");
        if (work_pending(&floppy_work))
                pr_info("work still pending\n");
@@ -4560,8 +4562,9 @@ static void __exit floppy_module_exit(void)
                put_disk(disks[drive]);
        }
 
-       del_timer_sync(&fd_timeout);
-       del_timer_sync(&fd_timer);
+       cancel_delayed_work_sync(&fd_timeout);
+       cancel_delayed_work_sync(&fd_timer);
+       destroy_workqueue(floppy_wq);
 
        if (atomic_read(&usage_count))
                floppy_release_irq_and_dma();