);
this_controller->power_control.phys_waiting = 0;
+ this_controller->power_control.phys_granted_power = 0;
}
/* --------------------------------------------------------------------------- */
__func__);
}
-/**
- * scic_sds_controller_get_port_configuration_mode
- * @this_controller: This is the controller to use to determine if we are using
- * manual or automatic port configuration.
- *
- * SCIC_PORT_CONFIGURATION_MODE
- */
-enum SCIC_PORT_CONFIGURATION_MODE scic_sds_controller_get_port_configuration_mode(
- struct scic_sds_controller *this_controller)
-{
- u32 index;
- enum SCIC_PORT_CONFIGURATION_MODE mode;
-
- mode = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
-
- for (index = 0; index < SCI_MAX_PORTS; index++) {
- if (this_controller->oem_parameters.sds1.ports[index].phy_mask != 0) {
- mode = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
- break;
- }
- }
-
- return mode;
-}
-
enum sci_status scic_sds_controller_stop_ports(struct scic_sds_controller *scic)
{
u32 index;
/**
* This method is called internally by the controller object to start the next
- * phy on the controller. If all the phys have been starte, then this
+ * phy on the controller. If all the phys have been started, then this
* method will attempt to transition the controller to the READY state and
* inform the user (scic_cb_controller_start_complete()).
* @this_controller: This parameter specifies the controller object for which
*
* enum sci_status
*/
-enum sci_status scic_sds_controller_start_next_phy(
- struct scic_sds_controller *this_controller)
+enum sci_status scic_sds_controller_start_next_phy(struct scic_sds_controller *scic)
{
+ struct scic_sds_oem_params *oem = &scic->oem_parameters.sds1;
+ struct scic_sds_phy *sci_phy;
enum sci_status status;
status = SCI_SUCCESS;
- if (this_controller->phy_startup_timer_pending == false) {
- if (this_controller->next_phy_to_start == SCI_MAX_PHYS) {
- bool is_controller_start_complete = true;
- struct scic_sds_phy *the_phy;
- u8 index;
+ if (scic->phy_startup_timer_pending)
+ return status;
- for (index = 0; index < SCI_MAX_PHYS; index++) {
- the_phy = &this_controller->phy_table[index];
-
- if (scic_sds_phy_get_port(the_phy) != NULL) {
- /**
- * The controller start operation is complete if and only
- * if:
- * - all links have been given an opportunity to start
- * - have no indication of a connected device
- * - have an indication of a connected device and it has
- * finished the link training process.
- */
- if (
- (
- (the_phy->is_in_link_training == false)
- && (the_phy->parent.state_machine.current_state_id
- == SCI_BASE_PHY_STATE_INITIAL)
- )
- || (
- (the_phy->is_in_link_training == false)
- && (the_phy->parent.state_machine.current_state_id
- == SCI_BASE_PHY_STATE_STOPPED)
- )
- || (
- (the_phy->is_in_link_training == true)
- && (the_phy->parent.state_machine.current_state_id
- == SCI_BASE_PHY_STATE_STARTING)
- )
- ) {
- is_controller_start_complete = false;
- break;
- }
- }
- }
+ if (scic->next_phy_to_start >= SCI_MAX_PHYS) {
+ bool is_controller_start_complete = true;
+ u32 state;
+ u8 index;
- /*
- * The controller has successfully finished the start process.
- * Inform the SCI Core user and transition to the READY state. */
- if (is_controller_start_complete == true) {
- scic_sds_controller_transition_to_ready(
- this_controller, SCI_SUCCESS
- );
- scic_sds_controller_phy_timer_stop(this_controller);
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ sci_phy = &scic->phy_table[index];
+ state = sci_phy->parent.state_machine.current_state_id;
+
+ if (!scic_sds_phy_get_port(sci_phy))
+ continue;
+
+ /* The controller start operation is complete iff:
+ * - all links have been given an opportunity to start
+ * - have no indication of a connected device
+ * - have an indication of a connected device and it has
+ * finished the link training process.
+ */
+ if ((sci_phy->is_in_link_training == false &&
+ state == SCI_BASE_PHY_STATE_INITIAL) ||
+ (sci_phy->is_in_link_training == false &&
+ state == SCI_BASE_PHY_STATE_STOPPED) ||
+ (sci_phy->is_in_link_training == true &&
+ state == SCI_BASE_PHY_STATE_STARTING)) {
+ is_controller_start_complete = false;
+ break;
}
- } else {
- struct scic_sds_phy *the_phy;
-
- the_phy = &this_controller->phy_table[this_controller->next_phy_to_start];
+ }
- if (
- scic_sds_controller_get_port_configuration_mode(this_controller)
- == SCIC_PORT_MANUAL_CONFIGURATION_MODE
- ) {
- if (scic_sds_phy_get_port(the_phy) == NULL) {
- this_controller->next_phy_to_start++;
-
- /*
- * Caution recursion ahead be forwarned
- *
- * The PHY was never added to a PORT in MPC mode so start the next phy in sequence
- * This phy will never go link up and will not draw power the OEM parameters either
- * configured the phy incorrectly for the PORT or it was never assigned to a PORT */
- return scic_sds_controller_start_next_phy(this_controller);
- }
+ /*
+ * The controller has successfully finished the start process.
+ * Inform the SCI Core user and transition to the READY state. */
+ if (is_controller_start_complete == true) {
+ scic_sds_controller_transition_to_ready(scic, SCI_SUCCESS);
+ scic_sds_controller_phy_timer_stop(scic);
+ }
+ } else {
+ sci_phy = &scic->phy_table[scic->next_phy_to_start];
+
+ if (oem->controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ if (scic_sds_phy_get_port(sci_phy) == NULL) {
+ scic->next_phy_to_start++;
+
+ /* Caution recursion ahead be forwarned
+ *
+ * The PHY was never added to a PORT in MPC mode
+ * so start the next phy in sequence This phy
+ * will never go link up and will not draw power
+ * the OEM parameters either configured the phy
+ * incorrectly for the PORT or it was never
+ * assigned to a PORT
+ */
+ return scic_sds_controller_start_next_phy(scic);
}
+ }
- status = scic_sds_phy_start(the_phy);
+ status = scic_sds_phy_start(sci_phy);
- if (status == SCI_SUCCESS) {
- scic_sds_controller_phy_timer_start(this_controller);
- } else {
- dev_warn(scic_to_dev(this_controller),
- "%s: Controller stop operation failed "
- "to stop phy %d because of status "
- "%d.\n",
- __func__,
- this_controller->phy_table[this_controller->next_phy_to_start].phy_index,
- status);
- }
-
- this_controller->next_phy_to_start++;
+ if (status == SCI_SUCCESS) {
+ scic_sds_controller_phy_timer_start(scic);
+ } else {
+ dev_warn(scic_to_dev(scic),
+ "%s: Controller stop operation failed "
+ "to stop phy %d because of status "
+ "%d.\n",
+ __func__,
+ scic->phy_table[scic->next_phy_to_start].phy_index,
+ status);
}
+
+ scic->next_phy_to_start++;
}
return status;
this_controller->power_control.timer_started = true;
}
+/**
+ * This method stops the power control timer for this controller object.
+ *
+ * @param scic
+ */
+void scic_sds_controller_power_control_timer_stop(struct scic_sds_controller *scic)
+{
+ if (scic->power_control.timer_started) {
+ isci_event_timer_stop(scic, scic->power_control.timer);
+ scic->power_control.timer_started = false;
+ }
+}
+
+/**
+ * This method stops and starts the power control timer for this controller object.
+ *
+ * @param scic
+ */
+void scic_sds_controller_power_control_timer_restart(
+ struct scic_sds_controller *scic)
+{
+ scic_sds_controller_power_control_timer_stop(scic);
+ scic_sds_controller_power_control_timer_start(scic);
+}
+
/**
*
*
this_controller = (struct scic_sds_controller *)controller;
+ this_controller->power_control.phys_granted_power = 0;
+
if (this_controller->power_control.phys_waiting == 0) {
this_controller->power_control.timer_started = false;
} else {
&& (this_controller->power_control.phys_waiting != 0);
i++) {
if (this_controller->power_control.requesters[i] != NULL) {
- the_phy = this_controller->power_control.requesters[i];
- this_controller->power_control.requesters[i] = NULL;
- this_controller->power_control.phys_waiting--;
- break;
+ if (this_controller->power_control.phys_granted_power <
+ this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
+ the_phy = this_controller->power_control.requesters[i];
+ this_controller->power_control.requesters[i] = NULL;
+ this_controller->power_control.phys_waiting--;
+ this_controller->power_control.phys_granted_power++;
+ scic_sds_phy_consume_power_handler(the_phy);
+ } else {
+ break;
+ }
}
}
/*
* It doesn't matter if the power list is empty, we need to start the
- * timer in case another phy becomes ready. */
+ * timer in case another phy becomes ready.
+ */
scic_sds_controller_power_control_timer_start(this_controller);
-
- scic_sds_phy_consume_power_handler(the_phy);
}
}
{
BUG_ON(the_phy == NULL);
- if (
- (this_controller->power_control.timer_started)
- && (this_controller->power_control.requesters[the_phy->phy_index] == NULL)
- ) {
+ if (this_controller->power_control.phys_granted_power <
+ this_controller->oem_parameters.sds1.controller.max_concurrent_dev_spin_up) {
+ this_controller->power_control.phys_granted_power++;
+ scic_sds_phy_consume_power_handler(the_phy);
+
+ /*
+ * stop and start the power_control timer. When the timer fires, the
+ * no_of_phys_granted_power will be set to 0
+ */
+ scic_sds_controller_power_control_timer_restart(this_controller);
+ } else {
+ /* Add the phy in the waiting list */
this_controller->power_control.requesters[the_phy->phy_index] = the_phy;
this_controller->power_control.phys_waiting++;
- } else {
- scic_sds_controller_power_control_timer_start(this_controller);
- scic_sds_phy_consume_power_handler(the_phy);
}
}
* This method sets user parameters and OEM parameters to default values.
* Users can override these values utilizing the scic_user_parameters_set()
* and scic_oem_parameters_set() methods.
- * @controller: This parameter specifies the controller for which to set the
+ * @scic: This parameter specifies the controller for which to set the
* configuration parameters to their default values.
*
*/
{
u16 index;
+ /* Default to APC mode. */
+ scic->oem_parameters.sds1.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
+
+ /* Default to APC mode. */
+ scic->oem_parameters.sds1.controller.max_concurrent_dev_spin_up = 1;
+
/* Default to no SSC operation. */
scic->oem_parameters.sds1.controller.do_enable_ssc = false;
== SCI_BASE_CONTROLLER_STATE_INITIALIZED)
) {
u16 index;
+ u8 combined_phy_mask = 0;
/*
* Validate the oem parameters. If they are not legal, then
}
}
+ if (scic_parms->sds1.controller.mode_type == SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE) {
+ for (index = 0; index < SCI_MAX_PHYS; index++) {
+ if (scic_parms->sds1.ports[index].phy_mask != 0)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+ } else if (scic_parms->sds1.controller.mode_type == SCIC_PORT_MANUAL_CONFIGURATION_MODE) {
+ for (index = 0; index < SCI_MAX_PHYS; index++)
+ combined_phy_mask |= scic_parms->sds1.ports[index].phy_mask;
+
+ if (combined_phy_mask == 0)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ } else {
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+ }
+
+ if (scic_parms->sds1.controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT)
+ return SCI_FAILURE_INVALID_PARAMETER_VALUE;
+
memcpy(&scic->oem_parameters, scic_parms, sizeof(*scic_parms));
return SCI_SUCCESS;
}
projects / firefly-linux-kernel-4.4.55.git / commitdiff