drm/i915/chv: Trigger phy common lane reset
authorChon Ming Lee <chon.ming.lee@intel.com>
Wed, 9 Apr 2014 10:28:17 +0000 (13:28 +0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Mon, 12 May 2014 17:50:13 +0000 (19:50 +0200)
During cold boot, the display controller needs to deassert the common
lane reset.  Only do it once during intel_init_dpio for both PHYx2 and
PHYx1.

Besides, assert the common lane reset when disable pll.  This still
to be determined whether need to do it by driver.

Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
[vsyrjala: Don't disable DPIO PLL when using DSI]
[vsyrjala: Don't call vlv_disable_pll() by accident on CHV]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Move part of a moved comment back as suggested by Imre since
it's valid for both byt and chv.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_display.c

index 17e139e9cbbc7c918710bd6a3f112320739265d0..921b48fbf5716eb5387096f7266c240d1baa8015 100644 (file)
@@ -1423,6 +1423,14 @@ enum punit_power_well {
 /* Additional CHV pll/phy registers */
 #define DPIO_PHY_STATUS                        (VLV_DISPLAY_BASE + 0x6240)
 #define   DPLL_PORTD_READY_MASK                (0xf)
+#define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100)
+#define   PHY_COM_LANE_RESET_DEASSERT(phy, val) \
+                               ((phy == DPIO_PHY0) ? (val | 1) : (val | 2))
+#define   PHY_COM_LANE_RESET_ASSERT(phy, val) \
+                               ((phy == DPIO_PHY0) ? (val & ~1) : (val & ~2))
+#define DISPLAY_PHY_STATUS (VLV_DISPLAY_BASE + 0x60104)
+#define   PHY_POWERGOOD(phy)   ((phy == DPIO_PHY0) ? (1<<31) : (1<<30))
+
 /*
  * The i830 generation, in LVDS mode, defines P1 as the bit number set within
  * this field (only one bit may be set).
index c42593fd53a5c89e446650631b33d3d7c17c55ce..8942f393b791f3f273a954828aabb2566a90b3d3 100644 (file)
@@ -1395,17 +1395,42 @@ static void intel_reset_dpio(struct drm_device *dev)
                   DPLL_REFA_CLK_ENABLE_VLV |
                   DPLL_INTEGRATED_CRI_CLK_VLV);
 
-       /*
-        * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
-        *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
-        *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
-        *   b. The other bits such as sfr settings / modesel may all be set
-        *      to 0.
-        *
-        * This should only be done on init and resume from S3 with both
-        * PLLs disabled, or we risk losing DPIO and PLL synchronization.
-        */
-       I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+       if (IS_CHERRYVIEW(dev)) {
+               enum dpio_phy phy;
+               u32 val;
+
+               for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) {
+                       /* Poll for phypwrgood signal */
+                       if (wait_for(I915_READ(DISPLAY_PHY_STATUS) &
+                                               PHY_POWERGOOD(phy), 1))
+                               DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+                       /*
+                        * Deassert common lane reset for PHY.
+                        *
+                        * This should only be done on init and resume from S3
+                        * with both PLLs disabled, or we risk losing DPIO and
+                        * PLL synchronization.
+                        */
+                       val = I915_READ(DISPLAY_PHY_CONTROL);
+                       I915_WRITE(DISPLAY_PHY_CONTROL,
+                               PHY_COM_LANE_RESET_DEASSERT(phy, val));
+               }
+
+       } else {
+               /*
+                * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+                *  6.  De-assert cmn_reset/side_reset. Same as VLV X0.
+                *   a. GUnit 0x2110 bit[0] set to 1 (def 0)
+                *   b. The other bits such as sfr settings / modesel may all
+                *      be set to 0.
+                *
+                * This should only be done on init and resume from S3 with
+                * both PLLs disabled, or we risk losing DPIO and PLL
+                * synchronization.
+                */
+               I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+       }
 }
 
 static void vlv_enable_pll(struct intel_crtc *crtc)
@@ -1529,6 +1554,19 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
                val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
        I915_WRITE(DPLL(pipe), val);
        POSTING_READ(DPLL(pipe));
+
+}
+
+static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+       int dpll = DPLL(pipe);
+       u32 val;
+
+       /* Set PLL en = 0 */
+       val = I915_READ(dpll);
+       val &= ~DPLL_VCO_ENABLE;
+       I915_WRITE(dpll, val);
+
 }
 
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
@@ -4446,10 +4484,14 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
                if (encoder->post_disable)
                        encoder->post_disable(encoder);
 
-       if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
-               vlv_disable_pll(dev_priv, pipe);
-       else if (!IS_VALLEYVIEW(dev))
-               i9xx_disable_pll(dev_priv, pipe);
+       if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) {
+               if (IS_CHERRYVIEW(dev))
+                       chv_disable_pll(dev_priv, pipe);
+               else if (IS_VALLEYVIEW(dev))
+                       vlv_disable_pll(dev_priv, pipe);
+               else
+                       i9xx_disable_pll(dev_priv, pipe);
+       }
 
        intel_crtc->active = false;
        intel_update_watermarks(crtc);