iwlwifi: allow probe-after-rx on 2.4 GHz
authorJohannes Berg <johannes.berg@intel.com>
Mon, 4 Oct 2010 12:47:23 +0000 (05:47 -0700)
committerWey-Yi Guy <wey-yi.w.guy@intel.com>
Thu, 14 Oct 2010 16:46:33 +0000 (09:46 -0700)
There are two passive 2.4 GHz channels: 12 and 13.
If you have a hidden SSID on those, you will not
be able to connect to it because we don't send out
probe requests there. We can allow this by using
the firmware's probe-after-rx functionality on
those channels as well.

This fixes
https://bugzilla.kernel.org/show_bug.cgi?id=16462

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
drivers/net/wireless/iwlwifi/iwl-agn-lib.c
drivers/net/wireless/iwlwifi/iwl3945-base.c

index c1a389883af036b872862dca4ca41b54acf19dcd..b555edd533547e3bf98eed8e948a276ef141aace 100644 (file)
@@ -1447,35 +1447,35 @@ int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
                if (priv->cfg->bt_params &&
                    priv->cfg->bt_params->advanced_bt_coexist)
                        scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
-               scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
                break;
        case IEEE80211_BAND_5GHZ:
                rate = IWL_RATE_6M_PLCP;
-               /*
-                * If active scanning is requested but a certain channel is
-                * marked passive, we can do active scanning if we detect
-                * transmissions.
-                *
-                * There is an issue with some firmware versions that triggers
-                * a sysassert on a "good CRC threshold" of zero (== disabled),
-                * on a radar channel even though this means that we should NOT
-                * send probes.
-                *
-                * The "good CRC threshold" is the number of frames that we
-                * need to receive during our dwell time on a channel before
-                * sending out probes -- setting this to a huge value will
-                * mean we never reach it, but at the same time work around
-                * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
-                * here instead of IWL_GOOD_CRC_TH_DISABLED.
-                */
-               scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-                                               IWL_GOOD_CRC_TH_NEVER;
                break;
        default:
                IWL_WARN(priv, "Invalid scan band\n");
                return -EIO;
        }
 
+       /*
+        * If active scanning is requested but a certain channel is
+        * marked passive, we can do active scanning if we detect
+        * transmissions.
+        *
+        * There is an issue with some firmware versions that triggers
+        * a sysassert on a "good CRC threshold" of zero (== disabled),
+        * on a radar channel even though this means that we should NOT
+        * send probes.
+        *
+        * The "good CRC threshold" is the number of frames that we
+        * need to receive during our dwell time on a channel before
+        * sending out probes -- setting this to a huge value will
+        * mean we never reach it, but at the same time work around
+        * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+        * here instead of IWL_GOOD_CRC_TH_DISABLED.
+        */
+       scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+                                       IWL_GOOD_CRC_TH_NEVER;
+
        band = priv->scan_band;
 
        if (priv->cfg->scan_rx_antennas[band])
index 980c6096620a2e56bf205c534b690818f6c33a5a..3ee3e55fa546332e6f97fed63a2e0cc4227abef3 100644 (file)
@@ -2938,18 +2938,10 @@ int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
        case IEEE80211_BAND_2GHZ:
                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
-               scan->good_CRC_th = 0;
                band = IEEE80211_BAND_2GHZ;
                break;
        case IEEE80211_BAND_5GHZ:
                scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
-               /*
-                * If active scaning is requested but a certain channel
-                * is marked passive, we can do active scanning if we
-                * detect transmissions.
-                */
-               scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
-                                               IWL_GOOD_CRC_TH_DISABLED;
                band = IEEE80211_BAND_5GHZ;
                break;
        default:
@@ -2957,6 +2949,14 @@ int iwl3945_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
                return -EIO;
        }
 
+       /*
+        * If active scaning is requested but a certain channel
+        * is marked passive, we can do active scanning if we
+        * detect transmissions.
+        */
+       scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+                                       IWL_GOOD_CRC_TH_DISABLED;
+
        if (!priv->is_internal_short_scan) {
                scan->tx_cmd.len = cpu_to_le16(
                        iwl_fill_probe_req(priv,