phylib: Add Realtek 821x eth PHY support
authorJohnson Leung <r58129@freescale.com>
Sun, 3 Feb 2008 11:50:54 +0000 (03:50 -0800)
committerDavid S. Miller <davem@davemloft.net>
Sun, 3 Feb 2008 12:28:42 +0000 (04:28 -0800)
this PHY present on the MPC8315E and MPC837xE RDB boards.

Signed-off-by: Johnson Leung <r58129@freescale.com>
Signed-off-by: Kevin Lam <r43770@freescale.com>
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/Kconfig
drivers/net/phy/Makefile
drivers/net/phy/realtek.c [new file with mode: 0644]

index 7fe03ce774b1e99d4c07f3b877f6a8a7d3d06841..f4ca0591231d233f63a2d98cb6036f106fde21c4 100644 (file)
@@ -60,6 +60,11 @@ config ICPLUS_PHY
        ---help---
          Currently supports the IP175C PHY.
 
+config REALTEK_PHY
+       tristate "Drivers for Realtek PHYs"
+       ---help---
+         Supports the Realtek 821x PHY.
+
 config FIXED_PHY
        bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
        ---help---
index 3d6cc7b67a800f209fc26b354a69c2eba3e8501c..5997d6ef702b979742d30642099411bb6aea815c 100644 (file)
@@ -12,5 +12,6 @@ obj-$(CONFIG_SMSC_PHY)                += smsc.o
 obj-$(CONFIG_VITESSE_PHY)      += vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)     += broadcom.o
 obj-$(CONFIG_ICPLUS_PHY)       += icplus.o
+obj-$(CONFIG_REALTEK_PHY)      += realtek.o
 obj-$(CONFIG_FIXED_PHY)                += fixed.o
 obj-$(CONFIG_MDIO_BITBANG)     += mdio-bitbang.o
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
new file mode 100644 (file)
index 0000000..a052a67
--- /dev/null
@@ -0,0 +1,80 @@
+/*
+ * drivers/net/phy/realtek.c
+ *
+ * Driver for Realtek PHYs
+ *
+ * Author: Johnson Leung <r58129@freescale.com>
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/phy.h>
+
+#define RTL821x_PHYSR          0x11
+#define RTL821x_PHYSR_DUPLEX   0x2000
+#define RTL821x_PHYSR_SPEED    0xc000
+#define RTL821x_INER           0x12
+#define RTL821x_INER_INIT      0x6400
+#define RTL821x_INSR           0x13
+
+MODULE_DESCRIPTION("Realtek PHY driver");
+MODULE_AUTHOR("Johnson Leung");
+MODULE_LICENSE("GPL");
+
+static int rtl821x_ack_interrupt(struct phy_device *phydev)
+{
+       int err;
+
+       err = phy_read(phydev, RTL821x_INSR);
+
+       return (err < 0) ? err : 0;
+}
+
+static int rtl821x_config_intr(struct phy_device *phydev)
+{
+       int err;
+
+       if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+               err = phy_write(phydev, RTL821x_INER,
+                               RTL821x_INER_INIT);
+       else
+               err = phy_write(phydev, RTL821x_INER, 0);
+
+       return err;
+}
+
+/* RTL8211B */
+static struct phy_driver rtl821x_driver = {
+       .phy_id         = 0x001cc912,
+       .name           = "RTL821x Gigabit Ethernet",
+       .phy_id_mask    = 0x001fffff,
+       .features       = PHY_GBIT_FEATURES,
+       .flags          = PHY_HAS_INTERRUPT,
+       .config_aneg    = &genphy_config_aneg,
+       .read_status    = &genphy_read_status,
+       .ack_interrupt  = &rtl821x_ack_interrupt,
+       .config_intr    = &rtl821x_config_intr,
+       .driver         = { .owner = THIS_MODULE,},
+};
+
+static int __init realtek_init(void)
+{
+       int ret;
+
+       ret = phy_driver_register(&rtl821x_driver);
+
+       return ret;
+}
+
+static void __exit realtek_exit(void)
+{
+       phy_driver_unregister(&rtl821x_driver);
+}
+
+module_init(realtek_init);
+module_exit(realtek_exit);