Convert with dev_err() and co from snd_printk(), etc.
As there are too deep indirections (e.g. ep->chip->dev->dev),
a few new local macros, usb_audio_err() & co, are introduced.
Also, the device numbers in some messages are dropped, as they are
shown in the prefix automatically.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct usb_interface *iface = usb_ifnum_to_if(dev, interface);
if (!iface) {
- snd_printk(KERN_ERR "%d:%u:%d : does not exist\n",
- dev->devnum, ctrlif, interface);
+ dev_err(&dev->dev, "%u:%d : does not exist\n",
+ ctrlif, interface);
return -EINVAL;
}
}
if (usb_interface_claimed(iface)) {
- snd_printdd(KERN_INFO "%d:%d:%d: skipping, already claimed\n",
- dev->devnum, ctrlif, interface);
+ dev_dbg(&dev->dev, "%d:%d: skipping, already claimed\n",
+ ctrlif, interface);
return -EINVAL;
}
int err = snd_usbmidi_create(chip->card, iface,
&chip->midi_list, NULL);
if (err < 0) {
- snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n",
- dev->devnum, ctrlif, interface);
+ dev_err(&dev->dev,
+ "%u:%d: cannot create sequencer device\n",
+ ctrlif, interface);
return -EINVAL;
}
usb_driver_claim_interface(&usb_audio_driver, iface, (void *)-1L);
if ((altsd->bInterfaceClass != USB_CLASS_AUDIO &&
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) ||
altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING) {
- snd_printdd(KERN_ERR "%d:%u:%d: skipping non-supported interface %d\n",
- dev->devnum, ctrlif, interface, altsd->bInterfaceClass);
+ dev_dbg(&dev->dev,
+ "%u:%d: skipping non-supported interface %d\n",
+ ctrlif, interface, altsd->bInterfaceClass);
/* skip non-supported classes */
return -EINVAL;
}
if (snd_usb_get_speed(dev) == USB_SPEED_LOW) {
- snd_printk(KERN_ERR "low speed audio streaming not supported\n");
+ dev_err(&dev->dev, "low speed audio streaming not supported\n");
return -EINVAL;
}
protocol = altsd->bInterfaceProtocol;
if (!control_header) {
- snd_printk(KERN_ERR "cannot find UAC_HEADER\n");
+ dev_err(&dev->dev, "cannot find UAC_HEADER\n");
return -EINVAL;
}
switch (protocol) {
default:
- snd_printdd(KERN_WARNING "unknown interface protocol %#02x, assuming v1\n",
- protocol);
+ dev_warn(&dev->dev,
+ "unknown interface protocol %#02x, assuming v1\n",
+ protocol);
/* fall through */
case UAC_VERSION_1: {
struct uac1_ac_header_descriptor *h1 = control_header;
if (!h1->bInCollection) {
- snd_printk(KERN_INFO "skipping empty audio interface (v1)\n");
+ dev_info(&dev->dev, "skipping empty audio interface (v1)\n");
return -EINVAL;
}
if (h1->bLength < sizeof(*h1) + h1->bInCollection) {
- snd_printk(KERN_ERR "invalid UAC_HEADER (v1)\n");
+ dev_err(&dev->dev, "invalid UAC_HEADER (v1)\n");
return -EINVAL;
}
}
if (!assoc) {
- snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
+ dev_err(&dev->dev, "Audio class v2 interfaces need an interface association\n");
return -EINVAL;
}
case USB_SPEED_SUPER:
break;
default:
- snd_printk(KERN_ERR "unknown device speed %d\n", snd_usb_get_speed(dev));
+ dev_err(&dev->dev, "unknown device speed %d\n", snd_usb_get_speed(dev));
return -ENXIO;
}
err = snd_card_new(&intf->dev, index[idx], id[idx], THIS_MODULE,
0, &card);
if (err < 0) {
- snd_printk(KERN_ERR "cannot create card instance %d\n", idx);
+ dev_err(&dev->dev, "cannot create card instance %d\n", idx);
return err;
}
for (i = 0; i < SNDRV_CARDS; i++) {
if (usb_chip[i] && usb_chip[i]->dev == dev) {
if (usb_chip[i]->shutdown) {
- snd_printk(KERN_ERR "USB device is in the shutdown state, cannot create a card instance\n");
+ dev_err(&dev->dev, "USB device is in the shutdown state, cannot create a card instance\n");
goto __error;
}
chip = usb_chip[i];
break;
}
if (!chip) {
- printk(KERN_ERR "no available usb audio device\n");
+ dev_err(&dev->dev, "no available usb audio device\n");
goto __error;
}
}
return ret;
if (ret != sizeof(pin)) {
- snd_printk(KERN_ERR
- "usb-audio:%d: setting selector (id %d) unexpected length %d\n",
- chip->dev->devnum, selector_id, ret);
+ usb_audio_err(chip,
+ "setting selector (id %d) unexpected length %d\n",
+ selector_id, ret);
return -EINVAL;
}
return ret;
if (ret != pin) {
- snd_printk(KERN_ERR
- "usb-audio:%d: setting selector (id %d) to %x failed (current: %d)\n",
- chip->dev->devnum, selector_id, pin, ret);
+ usb_audio_err(chip,
+ "setting selector (id %d) to %x failed (current: %d)\n",
+ selector_id, pin, ret);
return -EINVAL;
}
&data, sizeof(data));
if (err < 0) {
- snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
+ dev_warn(&dev->dev,
+ "%s(): cannot get clock validity for id %d\n",
__func__, source_id);
return 0;
}
entity_id &= 0xff;
if (test_and_set_bit(entity_id, visited)) {
- snd_printk(KERN_WARNING
- "%s(): recursive clock topology detected, id %d.\n",
- __func__, entity_id);
+ usb_audio_warn(chip,
+ "%s(): recursive clock topology detected, id %d.\n",
+ __func__, entity_id);
return -EINVAL;
}
if (source) {
entity_id = source->bClockID;
if (validate && !uac_clock_source_is_valid(chip, entity_id)) {
- snd_printk(KERN_ERR "usb-audio:%d: clock source %d is not valid, cannot use\n",
- chip->dev->devnum, entity_id);
+ usb_audio_err(chip,
+ "clock source %d is not valid, cannot use\n",
+ entity_id);
return -ENXIO;
}
return entity_id;
/* Selector values are one-based */
if (ret > selector->bNrInPins || ret < 1) {
- snd_printk(KERN_ERR
+ usb_audio_err(chip,
"%s(): selector reported illegal value, id %d, ret %d\n",
__func__, selector->bClockID, ret);
if (err < 0)
continue;
- snd_printk(KERN_INFO
- "usb-audio:%d: found and selected valid clock source %d\n",
- chip->dev->devnum, ret);
+ usb_audio_info(chip,
+ "found and selected valid clock source %d\n",
+ ret);
return ret;
}
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
data, sizeof(data))) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
- dev->devnum, iface, fmt->altsetting, rate, ep);
+ dev_err(&dev->dev, "%d:%d: cannot set freq %d to ep %#x\n",
+ iface, fmt->altsetting, rate, ep);
return err;
}
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
data, sizeof(data))) < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
- dev->devnum, iface, fmt->altsetting, ep);
+ dev_err(&dev->dev, "%d:%d: cannot get freq at ep %#x\n",
+ iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
}
crate = data[0] | (data[1] << 8) | (data[2] << 16);
if (crate != rate) {
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ dev_warn(&dev->dev, "current rate %d is different from the runtime rate %d\n", crate, rate);
// runtime->rate = crate;
}
snd_usb_ctrl_intf(chip) | (clock << 8),
&data, sizeof(data));
if (err < 0) {
- snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2): err %d\n",
- dev->devnum, iface, altsetting, err);
+ dev_warn(&dev->dev, "%d:%d: cannot get freq (v2): err %d\n",
+ iface, altsetting, err);
return 0;
}
snd_usb_ctrl_intf(chip) | (clock << 8),
&data, sizeof(data));
if (err < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2): err %d\n",
- dev->devnum, iface, fmt->altsetting, rate, err);
+ usb_audio_err(chip,
+ "%d:%d: cannot set freq %d (v2): err %d\n",
+ iface, fmt->altsetting, rate, err);
return err;
}
if (cur_rate != rate) {
if (!writeable) {
- snd_printk(KERN_WARNING
- "%d:%d:%d: freq mismatch (RO clock): req %d, clock runs @%d\n",
- dev->devnum, iface, fmt->altsetting, rate, cur_rate);
+ usb_audio_warn(chip,
+ "%d:%d: freq mismatch (RO clock): req %d, clock runs @%d\n",
+ iface, fmt->altsetting, rate, cur_rate);
return -ENXIO;
}
- snd_printd(KERN_WARNING
- "current rate %d is different from the runtime rate %d\n",
- cur_rate, rate);
+ usb_audio_dbg(chip,
+ "current rate %d is different from the runtime rate %d\n",
+ cur_rate, rate);
}
/* Some devices doesn't respond to sample rate changes while the
err = usb_submit_urb(ctx->urb, GFP_ATOMIC);
if (err < 0)
- snd_printk(KERN_ERR "Unable to submit urb #%d: %d (urb %p)\n",
- ctx->index, err, ctx->urb);
+ usb_audio_err(ep->chip,
+ "Unable to submit urb #%d: %d (urb %p)\n",
+ ctx->index, err, ctx->urb);
else
set_bit(ctx->index, &ep->active_mask);
}
if (err == 0)
return;
- snd_printk(KERN_ERR "cannot submit urb (err = %d)\n", err);
+ usb_audio_err(ep->chip, "cannot submit urb (err = %d)\n", err);
//snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
exit_clear:
if (ep->ep_num == ep_num &&
ep->iface == alts->desc.bInterfaceNumber &&
ep->altsetting == alts->desc.bAlternateSetting) {
- snd_printdd(KERN_DEBUG "Re-using EP %x in iface %d,%d @%p\n",
+ usb_audio_dbg(ep->chip,
+ "Re-using EP %x in iface %d,%d @%p\n",
ep_num, ep->iface, ep->altsetting, ep);
goto __exit_unlock;
}
}
- snd_printdd(KERN_DEBUG "Creating new %s %s endpoint #%x\n",
+ usb_audio_dbg(chip, "Creating new %s %s endpoint #%x\n",
is_playback ? "playback" : "capture",
type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
ep_num);
} while (time_before(jiffies, end_time));
if (alive)
- snd_printk(KERN_ERR "timeout: still %d active urbs on EP #%x\n",
- alive, ep->ep_num);
+ usb_audio_err(ep->chip,
+ "timeout: still %d active urbs on EP #%x\n",
+ alive, ep->ep_num);
clear_bit(EP_FLAG_STOPPING, &ep->flags);
return 0;
int err;
if (ep->use_count != 0) {
- snd_printk(KERN_WARNING "Unable to change format on ep #%x: already in use\n",
- ep->ep_num);
+ usb_audio_warn(ep->chip,
+ "Unable to change format on ep #%x: already in use\n",
+ ep->ep_num);
return -EBUSY;
}
err = -EINVAL;
}
- snd_printdd(KERN_DEBUG "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
- ep->ep_num, ep->type, ep->nurbs, err);
+ usb_audio_dbg(ep->chip,
+ "Setting params for ep #%x (type %d, %d urbs), ret=%d\n",
+ ep->ep_num, ep->type, ep->nurbs, err);
return err;
}
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- snd_printk(KERN_ERR "cannot submit urb %d, error %d: %s\n",
- i, err, usb_error_string(err));
+ usb_audio_err(ep->chip,
+ "cannot submit urb %d, error %d: %s\n",
+ i, err, usb_error_string(err));
goto __error;
}
set_bit(i, &ep->active_mask);
if ((pcm_formats == 0) &&
(format == 0 || format == (1 << UAC_FORMAT_TYPE_I_UNDEFINED))) {
/* some devices don't define this correctly... */
- snd_printdd(KERN_INFO "%d:%u:%d : format type 0 is detected, processed as PCM\n",
- chip->dev->devnum, fp->iface, fp->altsetting);
+ usb_audio_info(chip, "%u:%d : format type 0 is detected, processed as PCM\n",
+ fp->iface, fp->altsetting);
format = 1 << UAC_FORMAT_TYPE_I_PCM;
}
if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) {
sample_width == 24 && sample_bytes == 2)
sample_bytes = 3;
else if (sample_width > sample_bytes * 8) {
- snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n",
- chip->dev->devnum, fp->iface, fp->altsetting,
- sample_width, sample_bytes);
+ usb_audio_info(chip, "%u:%d : sample bitwidth %d in over sample bytes %d\n",
+ fp->iface, fp->altsetting,
+ sample_width, sample_bytes);
}
/* check the format byte size */
switch (sample_bytes) {
pcm_formats |= SNDRV_PCM_FMTBIT_S32_LE;
break;
default:
- snd_printk(KERN_INFO "%d:%u:%d : unsupported sample bitwidth %d in %d bytes\n",
- chip->dev->devnum, fp->iface, fp->altsetting,
- sample_width, sample_bytes);
+ usb_audio_info(chip,
+ "%u:%d : unsupported sample bitwidth %d in %d bytes\n",
+ fp->iface, fp->altsetting,
+ sample_width, sample_bytes);
break;
}
}
pcm_formats |= SNDRV_PCM_FMTBIT_MU_LAW;
}
if (format & ~0x3f) {
- snd_printk(KERN_INFO "%d:%u:%d : unsupported format bits %#x\n",
- chip->dev->devnum, fp->iface, fp->altsetting, format);
+ usb_audio_info(chip,
+ "%u:%d : unsupported format bits %#x\n",
+ fp->iface, fp->altsetting, format);
}
pcm_formats |= snd_usb_interface_dsd_format_quirks(chip, fp, sample_bytes);
int nr_rates = fmt[offset];
if (fmt[0] < offset + 1 + 3 * (nr_rates ? nr_rates : 2)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
- chip->dev->devnum, fp->iface, fp->altsetting);
+ usb_audio_err(chip,
+ "%u:%d : invalid UAC_FORMAT_TYPE desc\n",
+ fp->iface, fp->altsetting);
return -EINVAL;
}
fp->rate_table = kmalloc(sizeof(int) * nr_rates, GFP_KERNEL);
if (fp->rate_table == NULL) {
- snd_printk(KERN_ERR "cannot malloc\n");
+ usb_audio_err(chip, "cannot malloc\n");
return -ENOMEM;
}
* get to know how many sample rates we have to expect.
* Then fp->rate_table can be allocated and filled.
*/
-static int parse_uac2_sample_rate_range(struct audioformat *fp, int nr_triplets,
+static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip,
+ struct audioformat *fp, int nr_triplets,
const unsigned char *data)
{
int i, nr_rates = 0;
nr_rates++;
if (nr_rates >= MAX_NR_RATES) {
- snd_printk(KERN_ERR "invalid uac2 rates\n");
+ usb_audio_err(chip, "invalid uac2 rates\n");
break;
}
int clock = snd_usb_clock_find_source(chip, fp->clock, false);
if (clock < 0) {
- snd_printk(KERN_ERR "%s(): unable to find clock source (clock %d)\n",
+ dev_err(&dev->dev,
+ "%s(): unable to find clock source (clock %d)\n",
__func__, clock);
goto err;
}
tmp, sizeof(tmp));
if (ret < 0) {
- snd_printk(KERN_ERR "%s(): unable to retrieve number of sample rates (clock %d)\n",
+ dev_err(&dev->dev,
+ "%s(): unable to retrieve number of sample rates (clock %d)\n",
__func__, clock);
goto err;
}
data, data_size);
if (ret < 0) {
- snd_printk(KERN_ERR "%s(): unable to retrieve sample rate range (clock %d)\n",
+ dev_err(&dev->dev,
+ "%s(): unable to retrieve sample rate range (clock %d)\n",
__func__, clock);
ret = -EINVAL;
goto err_free;
* will have to deal with. */
kfree(fp->rate_table);
fp->rate_table = NULL;
- fp->nr_rates = parse_uac2_sample_rate_range(fp, nr_triplets, data);
+ fp->nr_rates = parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
if (fp->nr_rates == 0) {
/* SNDRV_PCM_RATE_CONTINUOUS */
/* Call the triplet parser again, but this time, fp->rate_table is
* allocated, so the rates will be stored */
- parse_uac2_sample_rate_range(fp, nr_triplets, data);
+ parse_uac2_sample_rate_range(chip, fp, nr_triplets, data);
err_free:
kfree(data);
}
if (fp->channels < 1) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid channels %d\n",
- chip->dev->devnum, fp->iface, fp->altsetting, fp->channels);
+ usb_audio_err(chip,
+ "%u:%d : invalid channels %d\n",
+ fp->iface, fp->altsetting, fp->channels);
return -EINVAL;
}
fp->formats = SNDRV_PCM_FMTBIT_MPEG;
break;
default:
- snd_printd(KERN_INFO "%d:%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
- chip->dev->devnum, fp->iface, fp->altsetting, format);
+ usb_audio_info(chip,
+ "%u:%d : unknown format tag %#x is detected. processed as MPEG.\n",
+ fp->iface, fp->altsetting, format);
fp->formats = SNDRV_PCM_FMTBIT_MPEG;
break;
}
struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
brate = le16_to_cpu(fmt->wMaxBitRate);
framesize = le16_to_cpu(fmt->wSamplesPerFrame);
- snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
+ usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
fp->frame_size = framesize;
ret = parse_audio_format_rates_v1(chip, fp, _fmt, 8); /* fmt[8..] sample rates */
break;
struct uac_format_type_ii_ext_descriptor *fmt = _fmt;
brate = le16_to_cpu(fmt->wMaxBitRate);
framesize = le16_to_cpu(fmt->wSamplesPerFrame);
- snd_printd(KERN_INFO "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
+ usb_audio_info(chip, "found format II with max.bitrate = %d, frame size=%d\n", brate, framesize);
fp->frame_size = framesize;
ret = parse_audio_format_rates_v2(chip, fp);
break;
err = parse_audio_format_ii(chip, fp, format, fmt);
break;
default:
- snd_printd(KERN_INFO "%d:%u:%d : format type %d is not supported yet\n",
- chip->dev->devnum, fp->iface, fp->altsetting,
- fmt->bFormatType);
+ usb_audio_info(chip,
+ "%u:%d : format type %d is not supported yet\n",
+ fp->iface, fp->altsetting,
+ fmt->bFormatType);
return -ENOTSUPP;
}
fp->fmt_type = fmt->bFormatType;
{
int err = usb_submit_urb(urb, flags);
if (err < 0 && err != -ENODEV)
- snd_printk(KERN_ERR "usb_submit_urb: %d\n", err);
+ dev_err(&urb->dev->dev, "usb_submit_urb: %d\n", err);
return err;
}
/*
* Error handling for URB completion functions.
*/
-static int snd_usbmidi_urb_error(int status)
+static int snd_usbmidi_urb_error(const struct urb *urb)
{
- switch (status) {
+ switch (urb->status) {
/* manually unlinked, or device gone */
case -ENOENT:
case -ECONNRESET:
case -EILSEQ:
return -EIO;
default:
- snd_printk(KERN_ERR "urb status %d\n", status);
+ dev_err(&urb->dev->dev, "urb status %d\n", urb->status);
return 0; /* continue */
}
}
struct usbmidi_in_port* port = &ep->ports[portidx];
if (!port->substream) {
- snd_printd("unexpected port %d!\n", portidx);
+ dev_dbg(&ep->umidi->dev->dev, "unexpected port %d!\n", portidx);
return;
}
if (!test_bit(port->substream->number, &ep->umidi->input_triggered))
ep->umidi->usb_protocol_ops->input(ep, urb->transfer_buffer,
urb->actual_length);
} else {
- int err = snd_usbmidi_urb_error(urb->status);
+ int err = snd_usbmidi_urb_error(urb);
if (err < 0) {
if (err != -ENODEV) {
ep->error_resubmit = 1;
}
spin_unlock(&ep->buffer_lock);
if (urb->status < 0) {
- int err = snd_usbmidi_urb_error(urb->status);
+ int err = snd_usbmidi_urb_error(urb);
if (err < 0) {
if (err != -ENODEV)
mod_timer(&ep->umidi->error_timer,
struct snd_rawmidi_substream *substream = snd_usbmidi_find_substream(umidi, stream, number);
if (!substream) {
- snd_printd(KERN_ERR "substream %d:%d not found\n", stream, number);
+ dev_err(&umidi->dev->dev, "substream %d:%d not found\n", stream, number);
return;
}
}
}
}
- snd_printdd(KERN_INFO "created %d output and %d input ports\n",
+ dev_dbg(&umidi->dev->dev, "created %d output and %d input ports\n",
out_ports, in_ports);
return 0;
}
ms_header->bLength >= 7 &&
ms_header->bDescriptorType == USB_DT_CS_INTERFACE &&
ms_header->bDescriptorSubtype == UAC_HEADER)
- snd_printdd(KERN_INFO "MIDIStreaming version %02x.%02x\n",
+ dev_dbg(&umidi->dev->dev, "MIDIStreaming version %02x.%02x\n",
ms_header->bcdMSC[1], ms_header->bcdMSC[0]);
else
- snd_printk(KERN_WARNING "MIDIStreaming interface descriptor not found\n");
+ dev_warn(&umidi->dev->dev,
+ "MIDIStreaming interface descriptor not found\n");
epidx = 0;
for (i = 0; i < intfd->bNumEndpoints; ++i) {
if (usb_endpoint_dir_out(ep)) {
if (endpoints[epidx].out_ep) {
if (++epidx >= MIDI_MAX_ENDPOINTS) {
- snd_printk(KERN_WARNING "too many endpoints\n");
+ dev_warn(&umidi->dev->dev,
+ "too many endpoints\n");
break;
}
}
*/
endpoints[epidx].out_interval = 1;
endpoints[epidx].out_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
- snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
+ dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
} else {
if (endpoints[epidx].in_ep) {
if (++epidx >= MIDI_MAX_ENDPOINTS) {
- snd_printk(KERN_WARNING "too many endpoints\n");
+ dev_warn(&umidi->dev->dev,
+ "too many endpoints\n");
break;
}
}
else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
endpoints[epidx].in_interval = 1;
endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
- snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
+ dev_dbg(&umidi->dev->dev, "EP %02X: %d jack(s)\n",
ep->bEndpointAddress, ms_ep->bNumEmbMIDIJack);
}
}
(get_endpoint(hostif, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
return;
- snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n",
+ dev_dbg(&umidi->dev->dev, "switching to altsetting %d with int ep\n",
intfd->bAlternateSetting);
usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
intfd->bAlternateSetting);
* input bulk endpoints (at indices 1 and 3) which aren't used.
*/
if (intfd->bNumEndpoints < (endpoint->out_cables > 0x0001 ? 5 : 3)) {
- snd_printdd(KERN_ERR "not enough endpoints\n");
+ dev_dbg(&umidi->dev->dev, "not enough endpoints\n");
return -ENOENT;
}
epd = get_endpoint(hostif, 0);
if (!usb_endpoint_dir_in(epd) || !usb_endpoint_xfer_int(epd)) {
- snd_printdd(KERN_ERR "endpoint[0] isn't interrupt\n");
+ dev_dbg(&umidi->dev->dev, "endpoint[0] isn't interrupt\n");
return -ENXIO;
}
epd = get_endpoint(hostif, 2);
if (!usb_endpoint_dir_out(epd) || !usb_endpoint_xfer_bulk(epd)) {
- snd_printdd(KERN_ERR "endpoint[2] isn't bulk output\n");
+ dev_dbg(&umidi->dev->dev, "endpoint[2] isn't bulk output\n");
return -ENXIO;
}
if (endpoint->out_cables > 0x0001) {
epd = get_endpoint(hostif, 4);
if (!usb_endpoint_dir_out(epd) ||
!usb_endpoint_xfer_bulk(epd)) {
- snd_printdd(KERN_ERR "endpoint[4] isn't bulk output\n");
+ dev_dbg(&umidi->dev->dev, "endpoint[4] isn't bulk output\n");
return -ENXIO;
}
}
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
default:
- snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
+ dev_err(&umidi->dev->dev, "invalid quirk type %d\n", quirk->type);
err = -ENXIO;
break;
}
goto out;
}
}
- snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, idx, cval->val_type);
+ usb_audio_dbg(chip,
+ "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+ request, validx, idx, cval->val_type);
err = -EINVAL;
out:
if (ret < 0) {
error:
- snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, idx, cval->val_type);
+ usb_audio_err(chip,
+ "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
+ request, validx, idx, cval->val_type);
return ret;
}
err = get_cur_mix_raw(cval, channel, value);
if (err < 0) {
if (!cval->mixer->ignore_ctl_error)
- snd_printd(KERN_ERR "cannot get current value for control %d ch %d: err = %d\n",
+ usb_audio_dbg(cval->mixer->chip,
+ "cannot get current value for control %d ch %d: err = %d\n",
cval->control, channel, err);
return err;
}
/* FIXME */
if (request != UAC_SET_CUR) {
- snd_printdd(KERN_WARNING "RANGE setting not yet supported\n");
+ usb_audio_dbg(chip, "RANGE setting not yet supported\n");
return -EINVAL;
}
goto out;
}
}
- snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
+ usb_audio_dbg(chip, "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
request, validx, idx, cval->val_type, buf[0], buf[1]);
err = -EINVAL;
cval->ch_readonly & (1 << (channel - 1));
if (read_only) {
- snd_printdd(KERN_INFO "%s(): channel %d of control %d is read_only\n",
+ usb_audio_dbg(cval->mixer->chip,
+ "%s(): channel %d of control %d is read_only\n",
__func__, channel, cval->control);
return 0;
}
while (snd_ctl_find_id(mixer->chip->card, &kctl->id))
kctl->id.index++;
if ((err = snd_ctl_add(mixer->chip->card, kctl)) < 0) {
- snd_printd(KERN_ERR "cannot add control (err = %d)\n", err);
+ usb_audio_dbg(mixer->chip, "cannot add control (err = %d)\n", err);
return err;
}
cval->elem_id = &kctl->id;
static void volume_control_quirks(struct usb_mixer_elem_info *cval,
struct snd_kcontrol *kctl)
{
- switch (cval->mixer->chip->usb_id) {
+ struct snd_usb_audio *chip = cval->mixer->chip;
+ switch (chip->usb_id) {
case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */
case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */
if (strcmp(kctl->id.name, "Effect Duration") == 0) {
- snd_printk(KERN_INFO
- "usb-audio: set quirk for FTU Effect Duration\n");
+ usb_audio_info(chip,
+ "set quirk for FTU Effect Duration\n");
cval->min = 0x0000;
cval->max = 0x7f00;
cval->res = 0x0100;
}
if (strcmp(kctl->id.name, "Effect Volume") == 0 ||
strcmp(kctl->id.name, "Effect Feedback Volume") == 0) {
- snd_printk(KERN_INFO
- "usb-audio: set quirks for FTU Effect Feedback/Volume\n");
+ usb_audio_info(chip,
+ "set quirks for FTU Effect Feedback/Volume\n");
cval->min = 0x00;
cval->max = 0x7f;
break;
*/
if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
cval->min == -15616) {
- snd_printk(KERN_INFO
+ usb_audio_info(chip,
"set volume quirk for UDA1321/N101 chip\n");
cval->max = -256;
}
case USB_ID(0x046d, 0x09a4):
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
+ usb_audio_info(chip,
"set volume quirk for QuickCam E3500\n");
cval->min = 6080;
cval->max = 8768;
* Proboly there is some logitech magic behind this number --fishor
*/
if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
- snd_printk(KERN_INFO
+ usb_audio_info(chip,
"set resolution quirk: cval->res = 384\n");
cval->res = 384;
}
}
if (get_ctl_value(cval, UAC_GET_MAX, (cval->control << 8) | minchn, &cval->max) < 0 ||
get_ctl_value(cval, UAC_GET_MIN, (cval->control << 8) | minchn, &cval->min) < 0) {
- snd_printd(KERN_ERR "%d:%d: cannot get min/max values for control %d (id %d)\n",
+ usb_audio_err(cval->mixer->chip,
+ "%d:%d: cannot get min/max values for control %d (id %d)\n",
cval->id, snd_usb_ctrl_intf(cval->mixer->chip), cval->control, cval->id);
return -EINVAL;
}
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (! cval) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
return;
}
cval->mixer = state->mixer;
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
if (! kctl) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
kfree(cval);
return;
}
* devices. It will definitively catch all buggy Logitech devices.
*/
if (range > 384) {
- snd_printk(KERN_WARNING "usb_audio: Warning! Unlikely big "
+ usb_audio_warn(state->chip, "Warning! Unlikely big "
"volume range (=%u), cval->res is probably wrong.",
range);
- snd_printk(KERN_WARNING "usb_audio: [%d] FU [%s] ch = %d, "
+ usb_audio_warn(state->chip, "[%d] FU [%s] ch = %d, "
"val = %d/%d/%d", cval->id,
kctl->id.name, cval->channels,
cval->min, cval->max, cval->res);
}
- snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
+ usb_audio_dbg(state->chip, "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",
cval->id, kctl->id.name, cval->channels, cval->min, cval->max, cval->res);
snd_usb_mixer_add_control(state->mixer, kctl);
}
if (state->mixer->protocol == UAC_VERSION_1) {
csize = hdr->bControlSize;
if (!csize) {
- snd_printdd(KERN_ERR "usbaudio: unit %u: "
- "invalid bControlSize == 0\n", unitid);
+ usb_audio_dbg(state->chip,
+ "unit %u: invalid bControlSize == 0\n",
+ unitid);
return -EINVAL;
}
channels = (hdr->bLength - 7) / csize - 1;
bmaControls = hdr->bmaControls;
if (hdr->bLength < 7 + csize) {
- snd_printk(KERN_ERR "usbaudio: unit %u: "
- "invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
+ usb_audio_err(state->chip,
+ "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
+ unitid);
return -EINVAL;
}
} else {
channels = (hdr->bLength - 6) / 4 - 1;
bmaControls = ftr->bmaControls;
if (hdr->bLength < 6 + csize) {
- snd_printk(KERN_ERR "usbaudio: unit %u: "
- "invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
+ usb_audio_err(state->chip,
+ "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
+ unitid);
return -EINVAL;
}
}
/* master configuration quirks */
switch (state->chip->usb_id) {
case USB_ID(0x08bb, 0x2702):
- snd_printk(KERN_INFO
- "usbmixer: master volume quirk for PCM2702 chip\n");
+ usb_audio_info(state->chip,
+ "usbmixer: master volume quirk for PCM2702 chip\n");
/* disable non-functional volume control */
master_bits &= ~UAC_CONTROL_BIT(UAC_FU_VOLUME);
break;
case USB_ID(0x1130, 0xf211):
- snd_printk(KERN_INFO
- "usbmixer: volume control quirk for Tenx TP6911 Audio Headset\n");
+ usb_audio_info(state->chip,
+ "usbmixer: volume control quirk for Tenx TP6911 Audio Headset\n");
/* disable non-functional volume control */
channels = 0;
break;
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
if (! kctl) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
kfree(cval);
return;
}
len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
append_ctl_name(kctl, " Volume");
- snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n",
+ usb_audio_dbg(state->chip, "[%d] MU [%s] ch = %d, val = %d/%d\n",
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
snd_usb_mixer_add_control(state->mixer, kctl);
}
int pin, ich, err;
if (desc->bLength < 11 || ! (input_pins = desc->bNrInPins) || ! (num_outs = uac_mixer_unit_bNrChannels(desc))) {
- snd_printk(KERN_ERR "invalid MIXER UNIT descriptor %d\n", unitid);
+ usb_audio_err(state->chip, "invalid MIXER UNIT descriptor %d\n", unitid);
return -EINVAL;
}
/* no bmControls field (e.g. Maya44) -> ignore */
if (desc->bLength <= 10 + input_pins) {
- snd_printdd(KERN_INFO "MU %d has no bmControls field\n", unitid);
+ usb_audio_dbg(state->chip, "MU %d has no bmControls field\n", unitid);
return 0;
}
if (desc->bLength < 13 || desc->bLength < 13 + num_ins ||
desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
- snd_printk(KERN_ERR "invalid %s descriptor (id %d)\n", name, unitid);
+ usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
return -EINVAL;
}
continue;
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (! cval) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
return -ENOMEM;
}
cval->mixer = state->mixer;
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
if (! kctl) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
kfree(cval);
return -ENOMEM;
}
append_ctl_name(kctl, " ");
append_ctl_name(kctl, valinfo->suffix);
- snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n",
+ usb_audio_dbg(state->chip,
+ "[%d] PU [%s] ch = %d, val = %d/%d\n",
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0)
return err;
char **namelist;
if (!desc->bNrInPins || desc->bLength < 5 + desc->bNrInPins) {
- snd_printk(KERN_ERR "invalid SELECTOR UNIT descriptor %d\n", unitid);
+ usb_audio_err(state->chip,
+ "invalid SELECTOR UNIT descriptor %d\n", unitid);
return -EINVAL;
}
cval = kzalloc(sizeof(*cval), GFP_KERNEL);
if (! cval) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
return -ENOMEM;
}
cval->mixer = state->mixer;
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
if (! namelist) {
- snd_printk(KERN_ERR "cannot malloc\n");
+ usb_audio_err(state->chip, "cannot malloc\n");
kfree(cval);
return -ENOMEM;
}
len = 0;
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
if (! namelist[i]) {
- snd_printk(KERN_ERR "cannot malloc\n");
+ usb_audio_err(state->chip, "cannot malloc\n");
while (i--)
kfree(namelist[i]);
kfree(namelist);
kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
if (! kctl) {
- snd_printk(KERN_ERR "cannot malloc kcontrol\n");
+ usb_audio_err(state->chip, "cannot malloc kcontrol\n");
kfree(namelist);
kfree(cval);
return -ENOMEM;
append_ctl_name(kctl, " Playback Source");
}
- snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n",
+ usb_audio_dbg(state->chip, "[%d] SU [%s] items = %d\n",
cval->id, kctl->id.name, desc->bNrInPins);
if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0)
return err;
p1 = find_audio_control_unit(state, unitid);
if (!p1) {
- snd_printk(KERN_ERR "usbaudio: unit %d not found!\n", unitid);
+ usb_audio_err(state->chip, "unit %d not found!\n", unitid);
return -EINVAL;
}
case UAC2_EXTENSION_UNIT_V2:
return parse_audio_extension_unit(state, unitid, p1);
default:
- snd_printk(KERN_ERR "usbaudio: unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
+ usb_audio_err(state->chip,
+ "unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
return -EINVAL;
}
}
__u8 channel = value & 0xff;
if (channel >= MAX_CHANNELS) {
- snd_printk(KERN_DEBUG "%s(): bogus channel number %d\n",
- __func__, channel);
+ usb_audio_dbg(mixer->chip,
+ "%s(): bogus channel number %d\n",
+ __func__, channel);
return;
}
break;
default:
- snd_printk(KERN_DEBUG "unknown attribute %d in interrupt\n",
- attribute);
+ usb_audio_dbg(mixer->chip,
+ "unknown attribute %d in interrupt\n",
+ attribute);
break;
} /* switch */
}
for (status = urb->transfer_buffer;
len >= sizeof(*status);
len -= sizeof(*status), status++) {
- snd_printd(KERN_DEBUG "status interrupt: %02x %02x\n",
+ dev_dbg(&urb->dev->dev, "status interrupt: %02x %02x\n",
status->bStatusType,
status->bOriginator);
up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
- snd_printk(KERN_ERR
- "unable to issue vendor read request (ret = %d)", ret);
+ dev_err(&dev->dev,
+ "unable to issue vendor read request (ret = %d)", ret);
return ret;
}
up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
- snd_printk(KERN_ERR
- "unable to issue vendor write request (ret = %d)", ret);
+ dev_err(&dev->dev,
+ "unable to issue vendor write request (ret = %d)", ret);
return ret;
}
snd_usb_mixer_notify_id(mixer, mixer->rc_cfg->mute_mixer_id);
break;
default:
- snd_printd(KERN_DEBUG "memory change in unknown unit %d\n", unitid);
+ usb_audio_dbg(mixer->chip, "memory change in unknown unit %d\n", unitid);
break;
}
}
USB_TYPE_CLASS|USB_RECIP_ENDPOINT|USB_DIR_OUT,
UAC_EP_CS_ATTR_PITCH_CONTROL << 8, ep,
data, sizeof(data))) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH\n",
- dev->devnum, iface, ep);
+ usb_audio_err(chip, "%d:%d: cannot set enable PITCH\n",
+ iface, ep);
return err;
}
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC2_EP_CS_PITCH << 8, 0,
data, sizeof(data))) < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: cannot set enable PITCH (v2)\n",
- dev->devnum, iface, fmt->altsetting);
+ usb_audio_err(chip, "%d:%d: cannot set enable PITCH (v2)\n",
+ iface, fmt->altsetting);
return err;
}
if (!test_and_set_bit(SUBSTREAM_FLAG_DATA_EP_STARTED, &subs->flags)) {
struct snd_usb_endpoint *ep = subs->data_endpoint;
- snd_printdd(KERN_DEBUG "Starting data EP @%p\n", ep);
+ dev_dbg(&subs->dev->dev, "Starting data EP @%p\n", ep);
ep->data_subs = subs;
err = snd_usb_endpoint_start(ep, can_sleep);
subs->sync_endpoint->altsetting);
if (err < 0) {
clear_bit(SUBSTREAM_FLAG_SYNC_EP_STARTED, &subs->flags);
- snd_printk(KERN_ERR
- "%d:%d:%d: cannot set interface (%d)\n",
- subs->dev->devnum,
+ dev_err(&subs->dev->dev,
+ "%d:%d: cannot set interface (%d)\n",
subs->sync_endpoint->iface,
subs->sync_endpoint->altsetting, err);
return -EIO;
}
}
- snd_printdd(KERN_DEBUG "Starting sync EP @%p\n", ep);
+ dev_dbg(&subs->dev->dev, "Starting sync EP @%p\n", ep);
ep->sync_slave = subs->data_endpoint;
err = snd_usb_endpoint_start(ep, can_sleep);
if ((get_endpoint(alts, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC ||
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
- dev->devnum, fmt->iface, fmt->altsetting,
+ dev_err(&dev->dev,
+ "%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ fmt->iface, fmt->altsetting,
get_endpoint(alts, 1)->bmAttributes,
get_endpoint(alts, 1)->bLength,
get_endpoint(alts, 1)->bSynchAddress);
if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
((is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
(!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
- dev->devnum, fmt->iface, fmt->altsetting,
+ dev_err(&dev->dev,
+ "%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ fmt->iface, fmt->altsetting,
is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
if (subs->interface >= 0 && subs->interface != fmt->iface) {
err = usb_set_interface(subs->dev, subs->interface, 0);
if (err < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
- dev->devnum, fmt->iface, fmt->altsetting, err);
+ dev_err(&dev->dev,
+ "%d:%d: return to setting 0 failed (%d)\n",
+ fmt->iface, fmt->altsetting, err);
return -EIO;
}
subs->interface = -1;
subs->altset_idx != fmt->altset_idx) {
err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
if (err < 0) {
- snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
- dev->devnum, fmt->iface, fmt->altsetting, err);
+ dev_err(&dev->dev,
+ "%d:%d: usb_set_interface failed (%d)\n",
+ fmt->iface, fmt->altsetting, err);
return -EIO;
}
- snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
- fmt->iface, fmt->altsetting);
+ dev_dbg(&dev->dev, "setting usb interface %d:%d\n",
+ fmt->iface, fmt->altsetting);
subs->interface = fmt->iface;
subs->altset_idx = fmt->altset_idx;
* - Requested PCM format is not supported.
* - Requested sample rate is not supported.
*/
-static int match_endpoint_audioformats(struct audioformat *fp,
- struct audioformat *match, int rate,
- snd_pcm_format_t pcm_format)
+static int match_endpoint_audioformats(struct snd_usb_substream *subs,
+ struct audioformat *fp,
+ struct audioformat *match, int rate,
+ snd_pcm_format_t pcm_format)
{
int i;
int score = 0;
if (fp->channels < 1) {
- snd_printdd("%s: (fmt @%p) no channels\n", __func__, fp);
+ dev_dbg(&subs->dev->dev,
+ "%s: (fmt @%p) no channels\n", __func__, fp);
return 0;
}
if (!(fp->formats & pcm_format_to_bits(pcm_format))) {
- snd_printdd("%s: (fmt @%p) no match for format %d\n", __func__,
+ dev_dbg(&subs->dev->dev,
+ "%s: (fmt @%p) no match for format %d\n", __func__,
fp, pcm_format);
return 0;
}
}
}
if (!score) {
- snd_printdd("%s: (fmt @%p) no match for rate %d\n", __func__,
+ dev_dbg(&subs->dev->dev,
+ "%s: (fmt @%p) no match for rate %d\n", __func__,
fp, rate);
return 0;
}
if (fp->channels == match->channels)
score++;
- snd_printdd("%s: (fmt @%p) score %d\n", __func__, fp, score);
+ dev_dbg(&subs->dev->dev,
+ "%s: (fmt @%p) score %d\n", __func__, fp, score);
return score;
}
/* Try to find the best matching audioformat. */
list_for_each_entry(fp, &sync_subs->fmt_list, list) {
- int score = match_endpoint_audioformats(fp, subs->cur_audiofmt,
+ int score = match_endpoint_audioformats(subs,
+ fp, subs->cur_audiofmt,
subs->cur_rate, subs->pcm_format);
if (score > cur_score) {
}
if (unlikely(sync_fp == NULL)) {
- snd_printk(KERN_ERR "%s: no valid audioformat for sync ep %x found\n",
+ dev_err(&subs->dev->dev,
+ "%s: no valid audioformat for sync ep %x found\n",
__func__, sync_subs->ep_num);
return -EINVAL;
}
if (sync_fp->channels != subs->channels) {
sync_period_bytes = (subs->period_bytes / subs->channels) *
sync_fp->channels;
- snd_printdd("%s: adjusted sync ep period bytes (%d -> %d)\n",
+ dev_dbg(&subs->dev->dev,
+ "%s: adjusted sync ep period bytes (%d -> %d)\n",
__func__, subs->period_bytes, sync_period_bytes);
}
fmt = find_format(subs);
if (!fmt) {
- snd_printd(KERN_DEBUG "cannot set format: format = %#x, rate = %d, channels = %d\n",
+ dev_dbg(&subs->dev->dev,
+ "cannot set format: format = %#x, rate = %d, channels = %d\n",
subs->pcm_format, subs->cur_rate, subs->channels);
return -EINVAL;
}
int ret;
if (! subs->cur_audiofmt) {
- snd_printk(KERN_ERR "usbaudio: no format is specified!\n");
+ dev_err(&subs->dev->dev, "no format is specified!\n");
return -ENXIO;
}
for (i = 0; i < urb->number_of_packets; i++) {
cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset + subs->pkt_offset_adj;
if (urb->iso_frame_desc[i].status && printk_ratelimit()) {
- snd_printdd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
+ dev_dbg(&subs->dev->dev, "frame %d active: %d\n",
+ i, urb->iso_frame_desc[i].status);
// continue;
}
bytes = urb->iso_frame_desc[i].actual_length;
if (bytes % (runtime->sample_bits >> 3) != 0) {
int oldbytes = bytes;
bytes = frames * stride;
- snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n",
+ dev_warn(&subs->dev->dev,
+ "Corrected urb data len. %d->%d\n",
oldbytes, bytes);
}
/* update the current pointer */
* on two reads of a counter updated every ms.
*/
if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
- snd_printk(KERN_DEBUG "delay: estimated %d, actual %d\n",
+ dev_dbg(&subs->dev->dev,
+ "delay: estimated %d, actual %d\n",
est_delay, subs->last_delay);
if (!subs->running) {
altsd = get_iface_desc(alts);
err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
if (err < 0) {
- snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
+ usb_audio_err(chip, "cannot setup if %d: error %d\n",
altsd->bInterfaceNumber, err);
return err;
}
fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
if (!fp) {
- snd_printk(KERN_ERR "cannot memdup\n");
+ usb_audio_err(chip, "cannot memdup\n");
return -ENOMEM;
}
if (fp->nr_rates > MAX_NR_RATES) {
fp->rate_max = fp->rate_min = 96000;
break;
default:
- snd_printk(KERN_ERR "unknown sample rate\n");
+ usb_audio_err(chip, "unknown sample rate\n");
kfree(fp);
return -ENXIO;
}
if (quirk->type < QUIRK_TYPE_COUNT) {
return quirk_funcs[quirk->type](chip, iface, driver, quirk);
} else {
- snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
+ usb_audio_err(chip, "invalid quirk type %d\n", quirk->type);
return -ENXIO;
}
}
if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
- snd_printdd("sending Extigy boot sequence...\n");
+ dev_dbg(&dev->dev, "sending Extigy boot sequence...\n");
/* Send message to force it to reconnect with full interface. */
err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
- if (err < 0) snd_printdd("error sending boot message: %d\n", err);
+ if (err < 0)
+ dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
&dev->descriptor, sizeof(dev->descriptor));
config = dev->actconfig;
- if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
+ if (err < 0)
+ dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
err = usb_reset_configuration(dev);
- if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
- snd_printdd("extigy_boot: new boot length = %d\n",
+ if (err < 0)
+ dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
+ dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n",
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
return -ENODEV; /* quit this anyway */
}
int err;
if (dev->actconfig->desc.bConfigurationValue == 1) {
- snd_printk(KERN_INFO "usb-audio: "
+ dev_info(&dev->dev,
"Fast Track Pro switching to config #2\n");
/* This function has to be available by the usb core module.
* if it is not avialable the boot quirk has to be left out
*/
err = usb_driver_set_configuration(dev, 2);
if (err < 0)
- snd_printdd("error usb_driver_set_configuration: %d\n",
- err);
+ dev_dbg(&dev->dev,
+ "error usb_driver_set_configuration: %d\n",
+ err);
/* Always return an error, so that we stop creating a device
that will just be destroyed and recreated with a new
configuration */
return -ENODEV;
} else
- snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
+ dev_info(&dev->dev, "Fast Track Pro config OK\n");
return 0;
}
fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
if (fwsize != MBOX2_FIRMWARE_SIZE) {
- snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
+ dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize);
return -ENODEV;
}
- snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
+ dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n");
count = 0;
bootresponse[0] = MBOX2_BOOT_LOADING;
0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
if (bootresponse[0] == MBOX2_BOOT_READY)
break;
- snd_printd("usb-audio: device not ready, resending boot sequence...\n");
+ dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n");
count++;
}
if (bootresponse[0] != MBOX2_BOOT_READY) {
- snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
+ dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
return -ENODEV;
}
- snd_printdd("usb-audio: device initialised!\n");
+ dev_dbg(&dev->dev, "device initialised!\n");
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
&dev->descriptor, sizeof(dev->descriptor));
config = dev->actconfig;
if (err < 0)
- snd_printd("error usb_get_descriptor: %d\n", err);
+ dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
err = usb_reset_configuration(dev);
if (err < 0)
- snd_printd("error usb_reset_configuration: %d\n", err);
- snd_printdd("mbox2_boot: new boot length = %d\n",
+ dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
+ dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n",
le16_to_cpu(get_cfg_desc(config)->wTotalLength));
mbox2_setup_48_24_magic(dev);
- snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
+ dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz");
return 0; /* Successful boot */
}
return 1; /* skip this altsetting */
}
}
- snd_printdd(KERN_INFO
+ usb_audio_dbg(chip,
"using altsetting %d for interface %d config %d\n",
altno, iface, chip->setup);
return 0; /* keep this altsetting */
return 1;
}
- snd_printdd(KERN_INFO
+ usb_audio_dbg(chip,
"using altsetting %d for interface %d config %d\n",
altno, iface, chip->setup);
return 0; /* keep this altsetting */
if (!csep || csep->bLength < 7 ||
csep->bDescriptorSubtype != UAC_EP_GENERAL) {
- snd_printk(KERN_WARNING "%d:%u:%d : no or invalid"
- " class specific endpoint descriptor\n",
- chip->dev->devnum, iface_no,
- altsd->bAlternateSetting);
+ usb_audio_warn(chip,
+ "%u:%d : no or invalid class specific endpoint descriptor\n",
+ iface_no, altsd->bAlternateSetting);
return 0;
}
/* get audio formats */
switch (protocol) {
default:
- snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
- dev->devnum, iface_no, altno, protocol);
+ dev_dbg(&dev->dev, "%u:%d: unknown interface protocol %#02x, assuming v1\n",
+ iface_no, altno, protocol);
protocol = UAC_VERSION_1;
/* fall through */
struct uac_input_terminal_descriptor *iterm;
if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ iface_no, altno);
continue;
}
if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : invalid UAC_AS_GENERAL desc\n",
+ iface_no, altno);
continue;
}
snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
if (!as) {
- snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : UAC_AS_GENERAL descriptor not found\n",
+ iface_no, altno);
continue;
}
if (as->bLength < sizeof(*as)) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : invalid UAC_AS_GENERAL desc\n",
+ iface_no, altno);
continue;
}
break;
}
- snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n",
- dev->devnum, iface_no, altno, as->bTerminalLink);
+ dev_err(&dev->dev,
+ "%u:%d : bogus bTerminalLink %d\n",
+ iface_no, altno, as->bTerminalLink);
continue;
}
}
/* get format type */
fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE);
if (!fmt) {
- snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : no UAC_FORMAT_TYPE desc\n",
+ iface_no, altno);
continue;
}
if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) ||
((protocol == UAC_VERSION_2) && (fmt->bLength < 6))) {
- snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n",
- dev->devnum, iface_no, altno);
+ dev_err(&dev->dev,
+ "%u:%d : invalid UAC_FORMAT_TYPE desc\n",
+ iface_no, altno);
continue;
}
fp = kzalloc(sizeof(*fp), GFP_KERNEL);
if (! fp) {
- snd_printk(KERN_ERR "cannot malloc\n");
+ dev_err(&dev->dev, "cannot malloc\n");
return -ENOMEM;
}
chconfig = 0;
fp->chmap = convert_chmap(fp->channels, chconfig, protocol);
- snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint);
+ dev_dbg(&dev->dev, "%u:%d: add audio endpoint %#x\n", iface_no, altno, fp->endpoint);
err = snd_usb_add_audio_stream(chip, stream, fp);
if (err < 0) {
kfree(fp->rate_table);
struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
+#define usb_audio_err(chip, fmt, args...) \
+ dev_err(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_warn(chip, fmt, args...) \
+ dev_warn(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_info(chip, fmt, args...) \
+ dev_info(&(chip)->dev->dev, fmt, ##args)
+#define usb_audio_dbg(chip, fmt, args...) \
+ dev_dbg(&(chip)->dev->dev, fmt, ##args)
+
/*
* Information about devices with broken descriptors
*/
projects / firefly-linux-kernel-4.4.55.git / commitdiff