--- /dev/null
+/*****************************************************************************************
+ * arch/arm/palt-rk/rk-sdmmc-ops.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description: define the gpio for SDMMC module on various platforms
+ *
+ * Author: Michael Xie
+ * E-mail: xbw@rock-chips.com
+ *
+ * History:
+ * ver1.0 Unified function interface for new imoux-API, created at 2013-01-15
+ *
+ ******************************************************************************************/
+
+
+//use the new iomux-API
+#if defined(CONFIG_ARCH_RK3066B)||defined(CONFIG_ARCH_RK3168)||defined(CONFIG_ARCH_RK3188)
+#define SDMMC_USE_NEW_IOMUX_API 1
+#else
+#define SDMMC_USE_NEW_IOMUX_API 0
+#endif
+
+
+#if defined(CONFIG_ARCH_RK3066B) || defined(CONFIG_ARCH_RK3188)
+/*
+* define the gpio for sdmmc0
+*/
+static struct rksdmmc_gpio_board rksdmmc0_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK30_PIN3_PA2,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_clkout",
+ .fgpio = GPIO3_A2,
+ .fmux = MMC0_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK30_PIN3_PA3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_cmd",
+ .fgpio = GPIO3_A3,
+ .fmux = MMC0_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK30_PIN3_PA4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_d0",
+ .fgpio = GPIO3_A4,
+ .fmux = MMC0_D0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK30_PIN3_PA5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_d1",
+ .fgpio = GPIO3_A5,
+ .fmux = MMC0_D1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK30_PIN3_PA6,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_d2",
+ .fgpio = GPIO3_A6,
+ .fmux = MMC0_D2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK30_PIN3_PA7,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc0_d3",
+ .fgpio = GPIO3_A7,
+ .fmux = MMC0_D3,
+ },
+ },
+
+
+ .power_en_gpio = {
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+ .io = RK29SDK_SD_CARD_PWR_EN,
+ .enable = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_PWR_EN_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+
+ .detect_irq = {
+#if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N,
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #ifdef RK29SDK_SD_CARD_DETECT_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_DETECT_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_DETECT_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+
+};
+
+
+/*
+* define the gpio for sdmmc1
+*/
+static struct rksdmmc_gpio_board rksdmmc1_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK30_PIN3_PC5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_clkout",
+ .fgpio = GPIO3_C5,
+ .fmux = MMC1_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK30_PIN3_PC0,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_cmd",
+ .fgpio = GPIO3_C0,
+ .fmux = MMC1_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK30_PIN3_PC1,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_d0",
+ .fgpio = GPIO3_C1,
+ .fmux = MMC1_D0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK30_PIN3_PC2,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_d1",
+ .fgpio = GPIO3_C2,
+ .fmux = MMC1_D1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK30_PIN3_PC3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_d2",
+ .fgpio = GPIO3_C3,
+ .fmux = MMC1_D2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK30_PIN3_PC4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "mmc1_d3",
+ .fgpio = GPIO3_C4,
+ .fmux = MMC1_D3,
+ },
+ },
+};
+// ---end -#if defined(CONFIG_ARCH_RK3066B)
+
+#elif defined(CONFIG_ARCH_RK2928)
+/*
+* define the gpio for sdmmc0
+*/
+static struct rksdmmc_gpio_board rksdmmc0_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK2928_PIN1_PC0,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1C0_MMC0_CLKOUT_NAME,
+ .fgpio = GPIO1C_GPIO1C0,
+ .fmux = GPIO1C_MMC0_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK2928_PIN1_PC7,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1B7_MMC0_CMD_NAME,
+ .fgpio = GPIO1B_GPIO1B7,
+ .fmux = GPIO1B_MMC0_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK2928_PIN1_PC2,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1C2_MMC0_D0_NAME,
+ .fgpio = GPIO1C_GPIO1C2,
+ .fmux = GPIO1C_MMC0_D0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK2928_PIN1_PC3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1C3_MMC0_D1_NAME,
+ .fgpio = GPIO1C_GPIO1C3,
+ .fmux = GPIO1C_MMC0_D1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK2928_PIN1_PC4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1C4_MMC0_D2_NAME,
+ .fgpio = GPIO1C_GPIO1C4,
+ .fmux = GPIO1C_MMC0_D2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK2928_PIN1_PC5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO1C5_MMC0_D3_NAME,
+ .fgpio = GPIO1C_GPIO1C5,
+ .fmux = GPIO1C_MMC0_D3,
+ },
+ },
+
+
+ .power_en_gpio = {
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+ .io = RK29SDK_SD_CARD_PWR_EN,
+ .enable = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_PWR_EN_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+
+ .detect_irq = {
+#if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N,
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #ifdef RK29SDK_SD_CARD_DETECT_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_DETECT_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_DETECT_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+};
+
+
+/*
+* define the gpio for sdmmc1
+*/
+static struct rksdmmc_gpio_board rksdmmc1_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK2928_PIN0_PB1,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B1_MMC1_CLKOUT_NAME,
+ .fgpio = GPIO0B_GPIO0B1,
+ .fmux = GPIO0B_MMC1_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK2928_PIN0_PB0,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B0_MMC1_CMD_NAME,
+ .fgpio = GPIO0B_GPIO0B0,
+ .fmux = GPIO0B_MMC1_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK2928_PIN0_PB3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B3_MMC1_D0_NAME,
+ .fgpio = GPIO0B_GPIO0B3,
+ .fmux = GPIO0B_MMC1_D0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK2928_PIN0_PB4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B4_MMC1_D1_NAME,
+ .fgpio = GPIO0B_GPIO0B4,
+ .fmux = GPIO0B_MMC1_D1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK2928_PIN0_PB5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B5_MMC1_D2_NAME,
+ .fgpio = GPIO0B_GPIO0B5,
+ .fmux = GPIO0B_MMC1_D2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK2928_PIN0_PB6,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO0B6_MMC1_D3_NAME,
+ .fgpio = GPIO0B_GPIO0B6,
+ .fmux = GPIO0B_MMC1_D3,
+ },
+ },
+
+
+};
+// ---end -#if defined(CONFIG_ARCH_RK2928)
+
+#else //default for RK30,RK3066 SDK
+/*
+* define the gpio for sdmmc0
+*/
+struct rksdmmc_gpio_board rksdmmc0_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK30_PIN3_PB0,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B0_SDMMC0CLKOUT_NAME,
+ .fgpio = GPIO3B_GPIO3B0,
+ .fmux = GPIO3B_SDMMC0_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK30_PIN3_PB1,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B1_SDMMC0CMD_NAME,
+ .fgpio = GPIO3B_GPIO3B1,
+ .fmux = GPIO3B_SDMMC0_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK30_PIN3_PB2,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B2_SDMMC0DATA0_NAME,
+ .fgpio = GPIO3B_GPIO3B2,
+ .fmux = GPIO3B_SDMMC0_DATA0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK30_PIN3_PB3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B3_SDMMC0DATA1_NAME,
+ .fgpio = GPIO3B_GPIO3B3,
+ .fmux = GPIO3B_SDMMC0_DATA1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK30_PIN3_PB4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B4_SDMMC0DATA2_NAME,
+ .fgpio = GPIO3B_GPIO3B4,
+ .fmux = GPIO3B_SDMMC0_DATA2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK30_PIN3_PB5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3B5_SDMMC0DATA3_NAME,
+ .fgpio = GPIO3B_GPIO3B5,
+ .fmux = GPIO3B_SDMMC0_DATA3,
+ },
+ },
+
+ .power_en_gpio = {
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+ .io = RK29SDK_SD_CARD_PWR_EN,
+ .enable = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_PWR_EN_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_PWR_EN_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_PWR_EN_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+
+ .detect_irq = {
+#if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N,
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #ifdef RK29SDK_SD_CARD_DETECT_PIN_NAME
+ .iomux = {
+ .name = RK29SDK_SD_CARD_DETECT_PIN_NAME,
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO
+ .fgpio = RK29SDK_SD_CARD_DETECT_IOMUX_FGPIO,
+ #endif
+ #ifdef RK29SDK_SD_CARD_DETECT_IOMUX_FMUX
+ .fmux = RK29SDK_SD_CARD_DETECT_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+#else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+#endif
+ },
+};
+
+
+/*
+* define the gpio for sdmmc1
+*/
+static struct rksdmmc_gpio_board rksdmmc1_gpio_init = {
+
+ .clk_gpio = {
+ .io = RK30_PIN3_PC5,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C5_SDMMC1CLKOUT_NAME,
+ .fgpio = GPIO3C_GPIO3C5,
+ .fmux = GPIO3B_SDMMC0_CLKOUT,
+ },
+ },
+
+ .cmd_gpio = {
+ .io = RK30_PIN3_PC0,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C0_SMMC1CMD_NAME,
+ .fgpio = GPIO3C_GPIO3C0,
+ .fmux = GPIO3B_SDMMC0_CMD,
+ },
+ },
+
+ .data0_gpio = {
+ .io = RK30_PIN3_PC1,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C1_SDMMC1DATA0_NAME,
+ .fgpio = GPIO3C_GPIO3C1,
+ .fmux = GPIO3B_SDMMC0_DATA0,
+ },
+ },
+
+ .data1_gpio = {
+ .io = RK30_PIN3_PC2,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C2_SDMMC1DATA1_NAME,
+ .fgpio = GPIO3C_GPIO3C2,
+ .fmux = GPIO3B_SDMMC0_DATA1,
+ },
+ },
+
+ .data2_gpio = {
+ .io = RK30_PIN3_PC3,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C3_SDMMC1DATA2_NAME,
+ .fgpio = GPIO3C_GPIO3C3,
+ .fmux = GPIO3B_SDMMC0_DATA2,
+ },
+ },
+
+ .data3_gpio = {
+ .io = RK30_PIN3_PC4,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = GPIO3C4_SDMMC1DATA3_NAME,
+ .fgpio = GPIO3C_GPIO3C4,
+ .fmux = GPIO3B_SDMMC0_DATA3,
+ },
+ },
+};
+ // ---end -defualt rk30sdk,rk3066sdk
+
+#endif
+
+
+
+//1.Part 3: The various operations of the SDMMC-SDIO module
+/*************************************************************************
+* define the varaious operations for SDMMC module
+* Generally only the author of SDMMC module will modify this section.
+*************************************************************************/
+
+#if !defined(CONFIG_SDMMC_RK29_OLD)
+static void rk29_sdmmc_gpio_open(int device_id, int on)
+{
+ switch(device_id)
+ {
+ case 0://mmc0
+ {
+ #ifdef CONFIG_SDMMC0_RK29
+ if(on)
+ {
+ gpio_direction_output(rksdmmc0_gpio_init.clk_gpio.io, GPIO_HIGH);//set mmc0-clk to high
+ gpio_direction_output(rksdmmc0_gpio_init.cmd_gpio.io, GPIO_HIGH);// set mmc0-cmd to high.
+ gpio_direction_output(rksdmmc0_gpio_init.data0_gpio.io,GPIO_HIGH);//set mmc0-data0 to high.
+ gpio_direction_output(rksdmmc0_gpio_init.data1_gpio.io,GPIO_HIGH);//set mmc0-data1 to high.
+ gpio_direction_output(rksdmmc0_gpio_init.data2_gpio.io,GPIO_HIGH);//set mmc0-data2 to high.
+ gpio_direction_output(rksdmmc0_gpio_init.data3_gpio.io,GPIO_HIGH);//set mmc0-data3 to high.
+
+ mdelay(30);
+ }
+ else
+ {
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.clk_gpio.iomux.name, rksdmmc0_gpio_init.clk_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.clk_gpio.io, "mmc0-clk");
+ gpio_direction_output(rksdmmc0_gpio_init.clk_gpio.io,GPIO_LOW);//set mmc0-clk to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.cmd_gpio.iomux.name, rksdmmc0_gpio_init.cmd_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.cmd_gpio.io, "mmc0-cmd");
+ gpio_direction_output(rksdmmc0_gpio_init.cmd_gpio.io,GPIO_LOW);//set mmc0-cmd to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data0_gpio.iomux.name, rksdmmc0_gpio_init.data0_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data0_gpio.io, "mmc0-data0");
+ gpio_direction_output(rksdmmc0_gpio_init.data0_gpio.io,GPIO_LOW);//set mmc0-data0 to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data1_gpio.iomux.name, rksdmmc0_gpio_init.data1_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data1_gpio.io, "mmc0-data1");
+ gpio_direction_output(rksdmmc0_gpio_init.data1_gpio.io,GPIO_LOW);//set mmc0-data1 to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data2_gpio.iomux.name, rksdmmc0_gpio_init.data2_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data2_gpio.io, "mmc0-data2");
+ gpio_direction_output(rksdmmc0_gpio_init.data2_gpio.io,GPIO_LOW);//set mmc0-data2 to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data3_gpio.iomux.name, rksdmmc0_gpio_init.data3_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data3_gpio.io, "mmc0-data3");
+ gpio_direction_output(rksdmmc0_gpio_init.data3_gpio.io,GPIO_LOW);//set mmc0-data3 to low.
+
+ mdelay(30);
+ }
+ #endif
+ }
+ break;
+
+ case 1://mmc1
+ {
+ #ifdef CONFIG_SDMMC1_RK29
+ if(on)
+ {
+ gpio_direction_output(rksdmmc1_gpio_init.clk_gpio.io,GPIO_HIGH);//set mmc1-clk to high
+ gpio_direction_output(rksdmmc1_gpio_init.cmd_gpio.io,GPIO_HIGH);//set mmc1-cmd to high.
+ gpio_direction_output(rksdmmc1_gpio_init.data0_gpio.io,GPIO_HIGH);//set mmc1-data0 to high.
+ gpio_direction_output(rksdmmc1_gpio_init.data1_gpio.io,GPIO_HIGH);//set mmc1-data1 to high.
+ gpio_direction_output(rksdmmc1_gpio_init.data2_gpio.io,GPIO_HIGH);//set mmc1-data2 to high.
+ gpio_direction_output(rksdmmc1_gpio_init.data3_gpio.io,GPIO_HIGH);//set mmc1-data3 to high.
+ mdelay(100);
+ }
+ else
+ {
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc1_gpio_init.clk_gpio.iomux.name, rksdmmc1_gpio_init.clk_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.clk_gpio.io, "mmc1-clk");
+ gpio_direction_output(rksdmmc1_gpio_init.clk_gpio.io,GPIO_LOW);//set mmc1-clk to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc1_gpio_init.cmd_gpio.iomux.name, rksdmmc1_gpio_init.cmd_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.cmd_gpio.io, "mmc1-cmd");
+ gpio_direction_output(rksdmmc1_gpio_init.cmd_gpio.io,GPIO_LOW);//set mmc1-cmd to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc1_gpio_init.data0_gpio.iomux.name, rksdmmc1_gpio_init.data0_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.data0_gpio.io, "mmc1-data0");
+ gpio_direction_output(rksdmmc1_gpio_init.data0_gpio.io,GPIO_LOW);//set mmc1-data0 to low.
+
+ #if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) || defined(CONFIG_MT5931) || defined(CONFIG_MT5931_MT6622)
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk29_mux_api_set(rksdmmc1_gpio_init.data1_gpio.iomux.name, rksdmmc1_gpio_init.data1_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.data1_gpio.io, "mmc1-data1");
+ gpio_direction_output(rksdmmc1_gpio_init.data1_gpio.io,GPIO_LOW);//set mmc1-data1 to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk29_mux_api_set(rksdmmc1_gpio_init.data2_gpio.iomux.name, rksdmmc1_gpio_init.data2_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.data2_gpio.io, "mmc1-data2");
+ gpio_direction_output(rksdmmc1_gpio_init.data2_gpio.io,GPIO_LOW);//set mmc1-data2 to low.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk29_mux_api_set(rksdmmc1_gpio_init.data3_gpio.iomux.name, rksdmmc1_gpio_init.data3_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc1_gpio_init.data3_gpio.io, "mmc1-data3");
+ gpio_direction_output(rksdmmc1_gpio_init.data3_gpio.io,GPIO_LOW);//set mmc1-data3 to low.
+ #endif
+ mdelay(100);
+ }
+ #endif
+ }
+ break;
+
+ case 2: //mmc2
+ break;
+
+ default:
+ break;
+ }
+}
+
+static void rk29_sdmmc_set_iomux_mmc0(unsigned int bus_width)
+{
+ switch (bus_width)
+ {
+
+ case 1://SDMMC_CTYPE_4BIT:
+ {
+ #if SDMMC_USE_NEW_IOMUX_API
+ iomux_set(rksdmmc0_gpio_init.data1_gpio.iomux.fmux);
+ iomux_set(rksdmmc0_gpio_init.data2_gpio.iomux.fmux);
+ iomux_set(rksdmmc0_gpio_init.data3_gpio.iomux.fmux);
+ #else
+ rk30_mux_api_set(rksdmmc0_gpio_init.data1_gpio.iomux.name, rksdmmc0_gpio_init.data1_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc0_gpio_init.data2_gpio.iomux.name, rksdmmc0_gpio_init.data2_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc0_gpio_init.data3_gpio.iomux.name, rksdmmc0_gpio_init.data3_gpio.iomux.fmux);
+ #endif
+ }
+ break;
+
+ case 0x10000://SDMMC_CTYPE_8BIT:
+ break;
+ case 0xFFFF: //gpio_reset
+ {
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.power_en_gpio.iomux.name, rksdmmc0_gpio_init.power_en_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.power_en_gpio.io,"sdmmc-power");
+ gpio_direction_output(rksdmmc0_gpio_init.power_en_gpio.io, !(rksdmmc0_gpio_init.power_en_gpio.enable)); //power-off
+
+ #if 0 //replace the power control into rk29_sdmmc_set_ios(); modifyed by xbw at 2012-08-12
+ rk29_sdmmc_gpio_open(0, 0);
+
+ gpio_direction_output(rksdmmc0_gpio_init.power_en_gpio.io, rksdmmc0_gpio_init.power_en_gpio.enable); //power-on
+
+ rk29_sdmmc_gpio_open(0, 1);
+ #endif
+ }
+ break;
+
+ default: //case 0://SDMMC_CTYPE_1BIT:
+ {
+ #if SDMMC_USE_NEW_IOMUX_API
+ iomux_set(rksdmmc0_gpio_init.cmd_gpio.iomux.fmux);
+ iomux_set(rksdmmc0_gpio_init.clk_gpio.iomux.fmux);
+ iomux_set(rksdmmc0_gpio_init.data0_gpio.iomux.fmux);
+ #else
+ rk30_mux_api_set(rksdmmc0_gpio_init.cmd_gpio.iomux.name, rksdmmc0_gpio_init.cmd_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc0_gpio_init.clk_gpio.iomux.name, rksdmmc0_gpio_init.clk_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc0_gpio_init.data0_gpio.iomux.name, rksdmmc0_gpio_init.data0_gpio.iomux.fmux);
+ #endif
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data1_gpio.iomux.name, rksdmmc0_gpio_init.data1_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data1_gpio.io, "mmc0-data1");
+ gpio_direction_output(rksdmmc0_gpio_init.data1_gpio.io,GPIO_HIGH);//set mmc0-data1 to high.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data2_gpio.iomux.name, rksdmmc0_gpio_init.data2_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data2_gpio.io, "mmc0-data2");
+ gpio_direction_output(rksdmmc0_gpio_init.data2_gpio.io,GPIO_HIGH);//set mmc0-data2 to high.
+
+ #if !(!!SDMMC_USE_NEW_IOMUX_API)
+ rk30_mux_api_set(rksdmmc0_gpio_init.data3_gpio.iomux.name, rksdmmc0_gpio_init.data3_gpio.iomux.fgpio);
+ #endif
+ gpio_request(rksdmmc0_gpio_init.data3_gpio.io, "mmc0-data3");
+ gpio_direction_output(rksdmmc0_gpio_init.data3_gpio.io,GPIO_HIGH);//set mmc0-data3 to high.
+ }
+ break;
+ }
+}
+
+static void rk29_sdmmc_set_iomux_mmc1(unsigned int bus_width)
+{
+ #if SDMMC_USE_NEW_IOMUX_API
+ iomux_set(rksdmmc1_gpio_init.cmd_gpio.iomux.fmux);
+ iomux_set(rksdmmc1_gpio_init.clk_gpio.iomux.fmux);
+ iomux_set(rksdmmc1_gpio_init.data0_gpio.iomux.fmux);
+ iomux_set(rksdmmc1_gpio_init.data1_gpio.iomux.fmux);
+ iomux_set(rksdmmc1_gpio_init.data2_gpio.iomux.fmux);
+ iomux_set(rksdmmc1_gpio_init.data3_gpio.iomux.fmux);
+ #else
+ rk30_mux_api_set(rksdmmc1_gpio_init.cmd_gpio.iomux.name, rksdmmc1_gpio_init.cmd_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc1_gpio_init.clk_gpio.iomux.name, rksdmmc1_gpio_init.clk_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc1_gpio_init.data0_gpio.iomux.name, rksdmmc1_gpio_init.data0_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc1_gpio_init.data1_gpio.iomux.name, rksdmmc1_gpio_init.data1_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc1_gpio_init.data2_gpio.iomux.name, rksdmmc1_gpio_init.data2_gpio.iomux.fmux);
+ rk30_mux_api_set(rksdmmc1_gpio_init.data3_gpio.iomux.name, rksdmmc1_gpio_init.data3_gpio.iomux.fmux);
+ #endif
+}
+
+static void rk29_sdmmc_set_iomux_mmc2(unsigned int bus_width)
+{
+ ;//
+}
+
+static void rk29_sdmmc_set_iomux(int device_id, unsigned int bus_width)
+{
+ switch(device_id)
+ {
+ case 0:
+ #ifdef CONFIG_SDMMC0_RK29
+ rk29_sdmmc_set_iomux_mmc0(bus_width);
+ #endif
+ break;
+ case 1:
+ #ifdef CONFIG_SDMMC1_RK29
+ rk29_sdmmc_set_iomux_mmc1(bus_width);
+ #endif
+ break;
+ case 2:
+ rk29_sdmmc_set_iomux_mmc2(bus_width);
+ break;
+ default:
+ break;
+ }
+}
+
+#endif
+
+
--- /dev/null
+/******************************************************************************************
+ * arch/arm/palt-rk/rk-sdmmc-wifi.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description: define the varaious operations for Wifi module
+ *
+ * Author: Michael Xie
+ * E-mail: xbw@rock-chips.com
+ *
+ * History:
+ * ver1.0 Unified function interface for new imoux-API, created at 2013-01-15
+ *
+ *******************************************************************************************/
+
+static int rk29sdk_wifi_status(struct device *dev);
+static int rk29sdk_wifi_status_register(void (*callback)(int card_presend, void *dev_id), void *dev_id);
+
+#if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+static int rk29sdk_wifi_mmc0_status(struct device *dev);
+static int rk29sdk_wifi_mmc0_status_register(void (*callback)(int card_presend, void *dev_id), void *dev_id);
+static int rk29sdk_wifi_mmc0_cd = 0; /* wifi virtual 'card detect' status */
+static void (*wifi_mmc0_status_cb)(int card_present, void *dev_id);
+static void *wifi_mmc0_status_cb_devid;
+
+int rk29sdk_wifi_power_state = 0;
+int rk29sdk_bt_power_state = 0;
+
+ #if defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+ /////////////////////////////////////////////////////////////////////////////////////
+ // set the gpio to develop wifi EVB if you select the macro of CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD
+ #define USE_SDMMC_CONTROLLER_FOR_WIFI 0
+ #define COMBO_MODULE_MT6620_CDT 0 //- 1--use Cdtech chip; 0--unuse CDT chip
+ //power
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+ #define RK30SDK_WIFI_GPIO_POWER_PIN_NAME GPIO3D0_SDMMC1PWREN_NAME
+ #define RK30SDK_WIFI_GPIO_POWER_IOMUX_FGPIO GPIO3D_GPIO3D0
+ #define RK30SDK_WIFI_GPIO_POWER_IOMUX_FMUX GPIO3D_SDMMC1_PWR_EN
+ //reset
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ #define RK30SDK_WIFI_GPIO_RESET_PIN_NAME GPIO3D1_SDMMC1BACKENDPWR_NAME
+ #define RK30SDK_WIFI_GPIO_RESET_IOMUX_FGPIO GPIO3D_GPIO3D1
+ #define RK30SDK_WIFI_GPIO_RESET_IOMUX_FMUX GPIO3D_SDMMC1_BACKEND_PWR
+ //VDDIO
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL RK30_PIN2_PC5
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE GPIO_HIGH
+ //WIFI_INT_B
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B RK30_PIN3_PD2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_PIN_NAME GPIO3D2_SDMMC1INTN_NAME
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_IOMUX_FGPIO GPIO3D_GPIO3D2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_IOMUX_FMUX GPIO3D_SDMMC1_INT_N
+ //BGF_INT_B
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B RK30_PIN3_PC6
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE GPIO_HIGH
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_PIN_NAME GPIO3C6_SDMMC1DETECTN_NAME
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_IOMUX_FGPIO GPIO3C_GPIO3C6
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_IOMUX_FMUX GPIO3C_SDMMC1_DETECT_N
+ //GPS_SYNC
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC RK30_PIN3_PC7
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE GPIO_HIGH
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_PIN_NAME GPIO3C7_SDMMC1WRITEPRT_NAME
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_IOMUX_FGPIO GPIO3C_GPIO3C7
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_IOMUX_FMUX GPIO3C_SDMMC1_WRITE_PRT
+
+ #if COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #define RK30SDK_WIFI_GPIO_ANTSEL2 RK30_PIN4_PD4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE GPIO_LOW //use 6620 in CDT chip, LOW--work; High--no work.
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_PIN_NAME GPIO4D4_SMCDATA12_TRACEDATA12_NAME
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_IOMUX_FGPIO GPIO4D_GPIO4D4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_IOMUX_FMUX GPIO4D_TRACE_DATA12
+ //ANTSEL3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3 RK30_PIN4_PD3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_PIN_NAME GPIO4D3_SMCDATA11_TRACEDATA11_NAME
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_IOMUX_FGPIO GPIO4D_GPIO4D3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_IOMUX_FMUX GPIO4D_TRACE_DATA11
+ //GPS_LAN
+ #define RK30SDK_WIFI_GPIO_GPS_LAN RK30_PIN4_PD6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_PIN_NAME GPIO4D6_SMCDATA14_TRACEDATA14_NAME
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_IOMUX_FGPIO GPIO4D_GPIO4D6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_IOMUX_FMUX GPIO4D_TRACE_DATA14
+ #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+
+ #endif // #if defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)---#endif
+#endif // #if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) ---#endif
+
+static int rk29sdk_wifi_cd = 0; /* wifi virtual 'card detect' status */
+static void (*wifi_status_cb)(int card_present, void *dev_id);
+static void *wifi_status_cb_devid;
+
+#if defined(CONFIG_RK29_SDIO_IRQ_FROM_GPIO)
+#define RK29SDK_WIFI_SDIO_CARD_INT RK30SDK_WIFI_GPIO_WIFI_INT_B
+#endif
+
+struct rksdmmc_gpio_wifi_moudle rk_platform_wifi_gpio = {
+ .power_n = {
+ .io = RK30SDK_WIFI_GPIO_POWER_N,
+ .enable = RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_POWER_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_POWER_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_POWER_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_POWER_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_POWER_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+
+ #ifdef RK30SDK_WIFI_GPIO_RESET_N
+ .reset_n = {
+ .io = RK30SDK_WIFI_GPIO_RESET_N,
+ .enable = RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_RESET_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_RESET_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_RESET_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_RESET_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_RESET_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_WIFI_INT_B
+ .wifi_int_b = {
+ .io = RK30SDK_WIFI_GPIO_WIFI_INT_B,
+ .enable = RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_WIFI_INT_B_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_WIFI_INT_B_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_WIFI_INT_B_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_WIFI_INT_B_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_WIFI_INT_B_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL
+ .vddio = {
+ .io = RK30SDK_WIFI_GPIO_VCCIO_WL,
+ .enable = RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_VCCIO_WL_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_VCCIO_WL_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_VCCIO_WL_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_BGF_INT_B
+ .bgf_int_b = {
+ .io = RK30SDK_WIFI_GPIO_BGF_INT_B,
+ .enable = RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_BGF_INT_B_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_BGF_INT_B_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_BGF_INT_B_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_BGF_INT_B_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_BGF_INT_B_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_GPS_SYNC
+ .gps_sync = {
+ .io = RK30SDK_WIFI_GPIO_GPS_SYNC,
+ .enable = RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_GPS_SYNC_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_GPS_SYNC_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_GPS_SYNC_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_GPS_SYNC_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_GPS_SYNC_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+#if defined(COMBO_MODULE_MT6620_CDT) && COMBO_MODULE_MT6620_CDT
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL2
+ .ANTSEL2 = {
+ .io = RK30SDK_WIFI_GPIO_ANTSEL2,
+ .enable = RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL2_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_ANTSEL2_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_ANTSEL2_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL2_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_ANTSEL2_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL3
+ .ANTSEL3 = {
+ .io = RK30SDK_WIFI_GPIO_ANTSEL3,
+ .enable = RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL3_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_ANTSEL3_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_ANTSEL3_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL3_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_ANTSEL3_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_GPS_LAN
+ .GPS_LAN = {
+ .io = RK30SDK_WIFI_GPIO_GPS_LAN,
+ .enable = RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE,
+ #ifdef RK30SDK_WIFI_GPIO_GPS_LAN_PIN_NAME
+ .iomux = {
+ .name = RK30SDK_WIFI_GPIO_GPS_LAN_PIN_NAME,
+ .fgpio = RK30SDK_WIFI_GPIO_GPS_LAN_IOMUX_FGPIO,
+ #ifdef RK30SDK_WIFI_GPIO_GPS_LAN_IOMUX_FMUX
+ .fmux = RK30SDK_WIFI_GPIO_GPS_LAN_IOMUX_FMUX,
+ #endif
+ },
+ #endif
+ },
+ #endif
+#endif // #if COMBO_MODULE_MT6620_CDT--#endif
+};
+
+
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+#define PREALLOC_WLAN_SEC_NUM 4
+#define PREALLOC_WLAN_BUF_NUM 160
+#define PREALLOC_WLAN_SECTION_HEADER 24
+
+#define WLAN_SECTION_SIZE_0 (PREALLOC_WLAN_BUF_NUM * 128)
+#define WLAN_SECTION_SIZE_1 (PREALLOC_WLAN_BUF_NUM * 128)
+#define WLAN_SECTION_SIZE_2 (PREALLOC_WLAN_BUF_NUM * 512)
+#define WLAN_SECTION_SIZE_3 (PREALLOC_WLAN_BUF_NUM * 1024)
+
+#define WLAN_SKB_BUF_NUM 16
+
+static struct sk_buff *wlan_static_skb[WLAN_SKB_BUF_NUM];
+
+struct wifi_mem_prealloc {
+ void *mem_ptr;
+ unsigned long size;
+};
+
+static struct wifi_mem_prealloc wifi_mem_array[PREALLOC_WLAN_SEC_NUM] = {
+ {NULL, (WLAN_SECTION_SIZE_0 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_1 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_2 + PREALLOC_WLAN_SECTION_HEADER)},
+ {NULL, (WLAN_SECTION_SIZE_3 + PREALLOC_WLAN_SECTION_HEADER)}
+};
+
+static void *rk29sdk_mem_prealloc(int section, unsigned long size)
+{
+ if (section == PREALLOC_WLAN_SEC_NUM)
+ return wlan_static_skb;
+
+ if ((section < 0) || (section > PREALLOC_WLAN_SEC_NUM))
+ return NULL;
+
+ if (wifi_mem_array[section].size < size)
+ return NULL;
+
+ return wifi_mem_array[section].mem_ptr;
+}
+
+static int __init rk29sdk_init_wifi_mem(void)
+{
+ int i;
+ int j;
+
+ for (i = 0 ; i < WLAN_SKB_BUF_NUM ; i++) {
+ wlan_static_skb[i] = dev_alloc_skb(
+ ((i < (WLAN_SKB_BUF_NUM / 2)) ? 4096 : 8192));
+
+ if (!wlan_static_skb[i])
+ goto err_skb_alloc;
+ }
+
+ for (i = 0 ; i < PREALLOC_WLAN_SEC_NUM ; i++) {
+ wifi_mem_array[i].mem_ptr =
+ kmalloc(wifi_mem_array[i].size, GFP_KERNEL);
+
+ if (!wifi_mem_array[i].mem_ptr)
+ goto err_mem_alloc;
+ }
+ return 0;
+
+err_mem_alloc:
+ pr_err("Failed to mem_alloc for WLAN\n");
+ for (j = 0 ; j < i ; j++)
+ kfree(wifi_mem_array[j].mem_ptr);
+
+ i = WLAN_SKB_BUF_NUM;
+
+err_skb_alloc:
+ pr_err("Failed to skb_alloc for WLAN\n");
+ for (j = 0 ; j < i ; j++)
+ dev_kfree_skb(wlan_static_skb[j]);
+
+ return -ENOMEM;
+}
+
+static int rk29sdk_wifi_status(struct device *dev)
+{
+ return rk29sdk_wifi_cd;
+}
+
+static int rk29sdk_wifi_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
+{
+ if(wifi_status_cb)
+ return -EAGAIN;
+ wifi_status_cb = callback;
+ wifi_status_cb_devid = dev_id;
+ return 0;
+}
+
+static int __init rk29sdk_wifi_bt_gpio_control_init(void)
+{
+ rk29sdk_init_wifi_mem();
+ rk29_mux_api_set(rk_platform_wifi_gpio.power_n.iomux.name, rk_platform_wifi_gpio.power_n.iomux.fgpio);
+
+ if (rk_platform_wifi_gpio.power_n.io != INVALID_GPIO) {
+ if (gpio_request(rk_platform_wifi_gpio.power_n.io, "wifi_power")) {
+ pr_info("%s: request wifi power gpio failed\n", __func__);
+ return -1;
+ }
+ }
+
+#ifdef RK30SDK_WIFI_GPIO_RESET_N
+ if (rk_platform_wifi_gpio.reset_n.io != INVALID_GPIO) {
+ if (gpio_request(rk_platform_wifi_gpio.reset_n.io, "wifi reset")) {
+ pr_info("%s: request wifi reset gpio failed\n", __func__);
+ gpio_free(rk_platform_wifi_gpio.power_n.io);
+ return -1;
+ }
+ }
+#endif
+
+ if (rk_platform_wifi_gpio.power_n.io != INVALID_GPIO)
+ gpio_direction_output(rk_platform_wifi_gpio.power_n.io, !(rk_platform_wifi_gpio.power_n.enable) );
+
+#ifdef RK30SDK_WIFI_GPIO_RESET_N
+ if (rk_platform_wifi_gpio.reset_n.io != INVALID_GPIO)
+ gpio_direction_output(rk_platform_wifi_gpio.reset_n.io, !(rk_platform_wifi_gpio.reset_n.enable) );
+#endif
+
+ #if defined(CONFIG_SDMMC1_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+
+ #if !defined(CONFIG_MT5931) && !defined(CONFIG_MT5931_MT6622)
+ rk29_mux_api_set(rksdmmc1_gpio_init.data1_gpio.iomux.name, rksdmmc1_gpio_init.data1_gpio.iomux.fgpio);
+ gpio_request(rksdmmc1_gpio_init.data1_gpio.io, "mmc1-data1");
+ gpio_direction_output(rksdmmc1_gpio_init.data1_gpio.io,GPIO_LOW);//set mmc1-data1 to low.
+
+ rk29_mux_api_set(rksdmmc1_gpio_init.data2_gpio.iomux.name, rksdmmc1_gpio_init.data2_gpio.iomux.fgpio);
+ gpio_request(rksdmmc1_gpio_init.data2_gpio.io, "mmc1-data2");
+ gpio_direction_output(rksdmmc1_gpio_init.data2_gpio.io,GPIO_LOW);//set mmc1-data2 to low.
+
+ rk29_mux_api_set(rksdmmc1_gpio_init.data3_gpio.iomux.name, rksdmmc1_gpio_init.data3_gpio.iomux.fgpio);
+ gpio_request(rksdmmc1_gpio_init.data3_gpio.io, "mmc1-data3");
+ gpio_direction_output(rksdmmc1_gpio_init.data3_gpio.io,GPIO_LOW);//set mmc1-data3 to low.
+ #endif
+
+ rk29_sdmmc_gpio_open(1, 0); //added by xbw at 2011-10-13
+ #endif
+ pr_info("%s: init finished\n",__func__);
+
+ return 0;
+}
+
+#if (defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU) )&& defined(CONFIG_ARCH_RK2928)
+static int usbwifi_power_status = 1;
+int rk29sdk_wifi_power(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ if (on){
+ if(usbwifi_power_status == 1) {
+ rkusb_wifi_power(0);
+ mdelay(50);
+ }
+ rkusb_wifi_power(1);
+ usbwifi_power_status = 1;
+ pr_info("wifi turn on power\n");
+ }else{
+ rkusb_wifi_power(0);
+ usbwifi_power_status = 0;
+ pr_info("wifi shut off power\n");
+ }
+ return 0;
+}
+#else
+int rk29sdk_wifi_power(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ if (on){
+ gpio_set_value(rk_platform_wifi_gpio.power_n.io, rk_platform_wifi_gpio.power_n.enable);
+ mdelay(50);
+
+ #if defined(CONFIG_SDMMC1_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+ rk29_sdmmc_gpio_open(1, 1); //added by xbw at 2011-10-13
+ #endif
+
+ #ifdef RK30SDK_WIFI_GPIO_RESET_N
+ if (rk_platform_wifi_gpio.reset_n.io != INVALID_GPIO)
+ gpio_set_value(rk_platform_wifi_gpio.reset_n.io, rk_platform_wifi_gpio.reset_n.enable);
+ #endif
+ mdelay(100);
+ pr_info("wifi turn on power\n");
+ }else{
+// if (!rk29sdk_bt_power_state){
+ gpio_set_value(rk_platform_wifi_gpio.power_n.io, !(rk_platform_wifi_gpio.power_n.enable));
+
+ #if defined(CONFIG_SDMMC1_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+ rk29_sdmmc_gpio_open(1, 0); //added by xbw at 2011-10-13
+ #endif
+
+ mdelay(100);
+ pr_info("wifi shut off power\n");
+// }else
+// {
+// pr_info("wifi shouldn't shut off power, bt is using it!\n");
+// }
+#ifdef RK30SDK_WIFI_GPIO_RESET_N
+ if (rk_platform_wifi_gpio.reset_n.io != INVALID_GPIO)
+ gpio_set_value(rk_platform_wifi_gpio.reset_n.io, !(rk_platform_wifi_gpio.reset_n.enable));
+#endif
+ }
+
+// rk29sdk_wifi_power_state = on;
+ return 0;
+}
+#endif
+EXPORT_SYMBOL(rk29sdk_wifi_power);
+
+static int rk29sdk_wifi_reset_state;
+static int rk29sdk_wifi_reset(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ //mdelay(100);
+ rk29sdk_wifi_reset_state = on;
+ return 0;
+}
+
+int rk29sdk_wifi_set_carddetect(int val)
+{
+ pr_info("%s:%d\n", __func__, val);
+ rk29sdk_wifi_cd = val;
+ if (wifi_status_cb){
+ wifi_status_cb(val, wifi_status_cb_devid);
+ }else {
+ pr_warning("%s, nobody to notify\n", __func__);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_set_carddetect);
+
+
+static struct resource resources[] = {
+ {
+ .start = WIFI_HOST_WAKE,
+ .flags = IORESOURCE_IRQ,
+ .name = "bcmdhd_wlan_irq",
+ },
+};
+ //#if defined(CONFIG_WIFI_CONTROL_FUNC)----#elif
+
+///////////////////////////////////////////////////////////////////////////////////
+#elif defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+
+#define debug_combo_system 0
+
+int rk29sdk_wifi_combo_get_BGFgpio(void)
+{
+ return rk_platform_wifi_gpio.bgf_int_b.io;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_combo_get_BGFgpio);
+
+
+int rk29sdk_wifi_combo_get_GPS_SYNC_gpio(void)
+{
+ return rk_platform_wifi_gpio.gps_sync.io;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_combo_get_GPS_SYNC_gpio);
+
+
+static int rk29sdk_wifi_combo_module_gpio_init(void)
+{
+ //VDDIO
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.vddio.iomux.name, rk_platform_wifi_gpio.vddio.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.vddio.io, "combo-VDDIO");
+ gpio_direction_output(rk_platform_wifi_gpio.vddio.io, !(rk_platform_wifi_gpio.power_n.enable));
+ #endif
+
+ //BGF_INT_B
+ #ifdef RK30SDK_WIFI_GPIO_BGF_INT_B_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.bgf_int_b.iomux.name, rk_platform_wifi_gpio.bgf_int_b.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.bgf_int_b.io, "combo-BGFINT");
+ gpio_pull_updown(rk_platform_wifi_gpio.bgf_int_b.io, GPIOPullUp);
+ gpio_direction_input(rk_platform_wifi_gpio.bgf_int_b.io);
+
+ //WIFI_INT_B
+ #ifdef RK30SDK_WIFI_GPIO_WIFI_INT_B_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.bgf_int_b.iomux.name, rk_platform_wifi_gpio.bgf_int_b.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.wifi_int_b.io, "combo-WIFIINT");
+ gpio_pull_updown(rk_platform_wifi_gpio.wifi_int_b.io, GPIOPullUp);
+ gpio_direction_input(rk_platform_wifi_gpio.wifi_int_b.io);
+
+ //reset
+ #ifdef RK30SDK_WIFI_GPIO_RESET_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.reset_n.iomux.name, rk_platform_wifi_gpio.reset_n.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.reset_n.io, "combo-RST");
+ gpio_direction_output(rk_platform_wifi_gpio.reset_n.io, !(rk_platform_wifi_gpio.reset_n.enable));
+
+ //power
+ #ifdef RK30SDK_WIFI_GPIO_POWER_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.power_n.iomux.name, rk_platform_wifi_gpio.power_n.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.power_n.io, "combo-PMUEN");
+ gpio_direction_output(rk_platform_wifi_gpio.power_n.io, !(rk_platform_wifi_gpio.power_n.enable));
+
+ #if defined(COMBO_MODULE_MT6620_CDT) && COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL2
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL2_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.ANTSEL2.iomux.name, rk_platform_wifi_gpio.ANTSEL2.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.ANTSEL2.io, "combo-ANTSEL2");
+ gpio_direction_output(rk_platform_wifi_gpio.ANTSEL2.io, rk_platform_wifi_gpio.ANTSEL2.enable);
+ #endif
+
+ //ANTSEL3
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL3
+ #ifdef RK30SDK_WIFI_GPIO_ANTSEL3_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.ANTSEL3.iomux.name, rk_platform_wifi_gpio.ANTSEL3.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.ANTSEL3.io, "combo-ANTSEL3");
+ gpio_direction_output(rk_platform_wifi_gpio.ANTSEL3.io, rk_platform_wifi_gpio.ANTSEL3.enable);
+ #endif
+
+ //GPS_LAN
+ #ifdef RK30SDK_WIFI_GPIO_GPS_LAN
+ #ifdef RK30SDK_WIFI_GPIO_GPS_LAN_PIN_NAME
+ rk30_mux_api_set(rk_platform_wifi_gpio.GPS_LAN.iomux.name, rk_platform_wifi_gpio.GPS_LAN.iomux.fgpio);
+ #endif
+ gpio_request(rk_platform_wifi_gpio.GPS_LAN.io, "combo-GPSLAN");
+ gpio_direction_output(rk_platform_wifi_gpio.GPS_LAN.io, rk_platform_wifi_gpio.GPS_LAN.enable);
+ #endif
+
+ #endif//#if COMBO_MODULE_MT6620_CDT ---#endif
+
+ return 0;
+}
+
+
+int rk29sdk_wifi_combo_module_power(int on)
+{
+ if(on)
+ {
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL
+ gpio_set_value(rk_platform_wifi_gpio.vddio.io, rk_platform_wifi_gpio.vddio.enable);
+ mdelay(10);
+ #endif
+
+ gpio_set_value(rk_platform_wifi_gpio.power_n.io, rk_platform_wifi_gpio.power_n.enable);
+ mdelay(10);
+ pr_info("combo-module turn on power\n");
+ }
+ else
+ {
+ gpio_set_value(rk_platform_wifi_gpio.power_n.io, !(rk_platform_wifi_gpio.power_n.enable) );
+ mdelay(10);
+
+ #ifdef RK30SDK_WIFI_GPIO_VCCIO_WL
+ gpio_set_value(rk_platform_wifi_gpio.vddio.io, !(rk_platform_wifi_gpio.vddio.enable));
+ #endif
+
+ pr_info("combo-module turn off power\n");
+ }
+ return 0;
+
+}
+EXPORT_SYMBOL(rk29sdk_wifi_combo_module_power);
+
+
+int rk29sdk_wifi_combo_module_reset(int on)
+{
+ if(on)
+ {
+ gpio_set_value(rk_platform_wifi_gpio.reset_n.io, rk_platform_wifi_gpio.reset_n.enable);
+ pr_info("combo-module reset out 1\n");
+ }
+ else
+ {
+ gpio_set_value(rk_platform_wifi_gpio.reset_n.io, !(rk_platform_wifi_gpio.reset_n.enable) );
+ pr_info("combo-module reset out 0\n");
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_combo_module_reset);
+
+
+static int rk29sdk_wifi_mmc0_status(struct device *dev)
+{
+ return rk29sdk_wifi_mmc0_cd;
+}
+
+static int rk29sdk_wifi_mmc0_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
+{
+ if(wifi_mmc0_status_cb)
+ return -EAGAIN;
+ wifi_mmc0_status_cb = callback;
+ wifi_mmc0_status_cb_devid = dev_id;
+ return 0;
+}
+
+
+static int rk29sdk_wifi_status(struct device *dev)
+{
+ return rk29sdk_wifi_cd;
+}
+
+static int rk29sdk_wifi_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
+{
+ if(wifi_status_cb)
+ return -EAGAIN;
+ wifi_status_cb = callback;
+ wifi_status_cb_devid = dev_id;
+ return 0;
+}
+
+int rk29sdk_wifi_power(int on)
+{
+ pr_info("%s: %d\n", __func__, on);
+ if (on){
+
+ #if defined(CONFIG_SDMMC1_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+
+ #if defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+ rk29_sdmmc_gpio_open(0, 1);
+ #else
+ rk29_sdmmc_gpio_open(1, 0);
+ mdelay(10);
+ rk29_sdmmc_gpio_open(1, 1);
+ #endif
+ #endif
+
+ mdelay(100);
+ pr_info("wifi turn on power\n");
+ }
+ else
+ {
+#if defined(CONFIG_SDMMC1_RK29) && !defined(CONFIG_SDMMC_RK29_OLD)
+ #if defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+ rk29_sdmmc_gpio_open(0, 0);
+ #else
+ rk29_sdmmc_gpio_open(1, 0);
+ #endif
+#endif
+ mdelay(100);
+ pr_info("wifi shut off power\n");
+
+ }
+
+ rk29sdk_wifi_power_state = on;
+ return 0;
+
+}
+EXPORT_SYMBOL(rk29sdk_wifi_power);
+
+
+int rk29sdk_wifi_reset(int on)
+{
+ return 0;
+}
+EXPORT_SYMBOL(rk29sdk_wifi_reset);
+
+
+#if defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+int rk29sdk_wifi_set_carddetect(int val)
+{
+ pr_info("%s:%d\n", __func__, val);
+ rk29sdk_wifi_mmc0_cd = val;
+ if (wifi_mmc0_status_cb){
+ wifi_mmc0_status_cb(val, wifi_mmc0_status_cb_devid);
+ }else {
+ pr_warning("%s,in mmc0 nobody to notify\n", __func__);
+ }
+ return 0;
+}
+
+#else
+int rk29sdk_wifi_set_carddetect(int val)
+{
+ pr_info("%s:%d\n", __func__, val);
+ rk29sdk_wifi_cd = val;
+ if (wifi_status_cb){
+ wifi_status_cb(val, wifi_status_cb_devid);
+ }else {
+ pr_warning("%s,in mmc1 nobody to notify\n", __func__);
+ }
+ return 0;
+}
+#endif
+
+EXPORT_SYMBOL(rk29sdk_wifi_set_carddetect);
+
+///////////////////////////////////////////////////////////////////////////////////
+#endif //#if defined(CONFIG_WIFI_CONTROL_FUNC)---#elif defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) --#endif
+
+
+
+#if defined(CONFIG_WIFI_CONTROL_FUNC)
+static struct wifi_platform_data rk29sdk_wifi_control = {
+ .set_power = rk29sdk_wifi_power,
+ .set_reset = rk29sdk_wifi_reset,
+ .set_carddetect = rk29sdk_wifi_set_carddetect,
+ .mem_prealloc = rk29sdk_mem_prealloc,
+};
+
+static struct platform_device rk29sdk_wifi_device = {
+ .name = "bcmdhd_wlan",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resources),
+ .resource = resources,
+ .dev = {
+ .platform_data = &rk29sdk_wifi_control,
+ },
+};
+
+#elif defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+
+ #if debug_combo_system
+ static struct combo_module_platform_data rk29sdk_combo_module_control = {
+ .set_power = rk29sdk_wifi_combo_module_power,
+ .set_reset = rk29sdk_wifi_combo_module_reset,
+ };
+
+ static struct platform_device rk29sdk_combo_module_device = {
+ .name = "combo-system",
+ .id = 1,
+ .dev = {
+ .platform_data = &rk29sdk_combo_module_control,
+ },
+ };
+ #endif
+
+static struct wifi_platform_data rk29sdk_wifi_control = {
+ .set_power = rk29sdk_wifi_power,
+ .set_reset = rk29sdk_wifi_reset,
+ .set_carddetect = rk29sdk_wifi_set_carddetect,
+};
+
+static struct platform_device rk29sdk_wifi_device = {
+ .name = "combo-wifi",
+ .id = 1,
+ .dev = {
+ .platform_data = &rk29sdk_wifi_control,
+ },
+};
+
+#endif
+
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff