--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_ASHMEM=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_ARCH_RK3026=y
+CONFIG_DDR_FREQ=y
+# CONFIG_DDR_TEST is not set
+CONFIG_MACH_RK3026_TB=y
+CONFIG_ARM_ERRATA_761320=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_FIQ_DEBUGGER=y
+CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
+CONFIG_FIQ_DEBUGGER_CONSOLE=y
+CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_WAKELOCK=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_H323=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_NETBIOS_NS=y
+CONFIG_NF_CONNTRACK_PPTP=y
+CONFIG_NF_CONNTRACK_SANE=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CONNTRACK_TFTP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
+CONFIG_NETFILTER_XT_TARGET_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
+CONFIG_NETFILTER_XT_MATCH_SOCKET=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+CONFIG_NETFILTER_XT_MATCH_TIME=y
+CONFIG_NETFILTER_XT_MATCH_U32=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_PHONET=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_INGRESS=y
+CONFIG_NET_CLS_U32=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_U32=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=y
+CONFIG_NET_ACT_MIRRED=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM4325=y
+CONFIG_BT_AUTOSLEEP=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_RK=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_RKNAND=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_MISC_DEVICES=y
+CONFIG_UID_STAT=y
+CONFIG_APANIC=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN_80211=y
+CONFIG_RKWIFI=y
+CONFIG_USB_USBNET=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_XPAD=y
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=y
+CONFIG_TABLET_USB_AIPTEK=y
+CONFIG_TABLET_USB_GTCO=y
+CONFIG_TABLET_USB_HANWANG=y
+CONFIG_TABLET_USB_KBTAB=y
+CONFIG_TABLET_USB_WACOM=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT8XX=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_KEYCHORD=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_COMPASS_AK8975=y
+CONFIG_GS_MMA8452=y
+CONFIG_GS_LIS3DH=y
+CONFIG_GYRO_L3G4200D=y
+CONFIG_LS_CM3217=y
+CONFIG_SENSOR_DEVICE=y
+CONFIG_GSENSOR_DEVICE=y
+CONFIG_GS_KXTIK=y
+CONFIG_COMPASS_DEVICE=y
+CONFIG_GYROSCOPE_DEVICE=y
+CONFIG_LIGHT_DEVICE=y
+CONFIG_LS_AL3006=y
+CONFIG_LS_STK3171=y
+CONFIG_PROXIMITY_DEVICE=y
+CONFIG_PS_AL3006=y
+CONFIG_PS_STK3171=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_RK29=y
+CONFIG_UART0_RK29=y
+CONFIG_UART0_CTS_RTS_RK29=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C0_CONTROLLER_RK30=y
+CONFIG_I2C1_CONTROLLER_RK30=y
+CONFIG_I2C2_CONTROLLER_RK30=y
+CONFIG_I2C3_CONTROLLER_RK30=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WM831X=y
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+CONFIG_SPI_FPGA_GPIO_NUM=0
+CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
+CONFIG_POWER_SUPPLY=y
+CONFIG_TEST_POWER=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_MFD_TPS65090=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_WM831X=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_RK30_PWM_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2659=y
+CONFIG_VIDEO_RK29=y
+CONFIG_VIDEO_RK29_CAMMEM_ION=y
+CONFIG_ION=y
+CONFIG_ION_ROCKCHIP=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FB_ROCKCHIP=y
+CONFIG_DUAL_LCDC_DUAL_DISP_IN_KERNEL=y
+CONFIG_LCD_B101EW05=y
+CONFIG_RK_TRSM=y
+CONFIG_RGA_RK30=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_RK29_SOC=y
+CONFIG_UHID=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_ACRUX=y
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=y
+CONFIG_HID_ELECOM=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KEYTOUCH=y
+CONFIG_HID_KYE=y
+CONFIG_HID_UCLOGIC=y
+CONFIG_HID_WALTOP=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LCPOWER=y
+CONFIG_HID_LOGITECH=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWII_FF=y
+CONFIG_HID_MAGICMOUSE=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PICOLCD=y
+CONFIG_HID_QUANTA=y
+CONFIG_HID_ROCCAT_ARVO=y
+CONFIG_HID_ROCCAT_KONE=y
+CONFIG_HID_ROCCAT_KONEPLUS=y
+CONFIG_HID_ROCCAT_KOVAPLUS=y
+CONFIG_HID_ROCCAT_PYRA=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_OPTION=y
+CONFIG_USB_GADGET=y
+CONFIG_USB20_HOST=y
+CONFIG_USB20_OTG=y
+CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_EMBEDDED_SDIO=y
+CONFIG_MMC_PARANOID_SD_INIT=y
+CONFIG_MMC_BLOCK_MINORS=12
+CONFIG_SDMMC_RK29=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_TPS65910_RTC=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+# CONFIG_CMMB is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_TWOFISH=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_ASHMEM=y
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_ARCH_RK3026=y
+CONFIG_DDR_FREQ=y
+# CONFIG_DDR_TEST is not set
+CONFIG_MACH_RK3028A_TB=y
+CONFIG_ARM_ERRATA_761320=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_FIQ_DEBUGGER=y
+CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
+CONFIG_FIQ_DEBUGGER_CONSOLE=y
+CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+# CONFIG_SMP_ON_UP is not set
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_WAKELOCK=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_INET_ESP=y
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NETFILTER=y
+# CONFIG_BRIDGE_NETFILTER is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=y
+CONFIG_NF_CT_PROTO_SCTP=y
+CONFIG_NF_CT_PROTO_UDPLITE=y
+CONFIG_NF_CONNTRACK_AMANDA=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_CONNTRACK_H323=y
+CONFIG_NF_CONNTRACK_IRC=y
+CONFIG_NF_CONNTRACK_NETBIOS_NS=y
+CONFIG_NF_CONNTRACK_PPTP=y
+CONFIG_NF_CONNTRACK_SANE=y
+CONFIG_NF_CONNTRACK_SIP=y
+CONFIG_NF_CONNTRACK_TFTP=y
+CONFIG_NF_CT_NETLINK=y
+CONFIG_NETFILTER_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
+CONFIG_NETFILTER_XT_TARGET_MARK=y
+CONFIG_NETFILTER_XT_TARGET_NFLOG=y
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
+CONFIG_NETFILTER_XT_TARGET_TPROXY=y
+CONFIG_NETFILTER_XT_TARGET_TRACE=y
+CONFIG_NETFILTER_XT_MATCH_COMMENT=y
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
+CONFIG_NETFILTER_XT_MATCH_HELPER=y
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
+CONFIG_NETFILTER_XT_MATCH_LENGTH=y
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+CONFIG_NETFILTER_XT_MATCH_MAC=y
+CONFIG_NETFILTER_XT_MATCH_MARK=y
+CONFIG_NETFILTER_XT_MATCH_POLICY=y
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
+CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
+CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
+CONFIG_NETFILTER_XT_MATCH_SOCKET=y
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
+CONFIG_NETFILTER_XT_MATCH_STRING=y
+CONFIG_NETFILTER_XT_MATCH_TIME=y
+CONFIG_NETFILTER_XT_MATCH_U32=y
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_AH=y
+CONFIG_IP_NF_MATCH_ECN=y
+CONFIG_IP_NF_MATCH_TTL=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_NF_NAT=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_NETMAP=y
+CONFIG_IP_NF_TARGET_REDIRECT=y
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_RAW=y
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+CONFIG_IP_NF_ARP_MANGLE=y
+CONFIG_NF_CONNTRACK_IPV6=y
+CONFIG_IP6_NF_IPTABLES=y
+CONFIG_IP6_NF_TARGET_LOG=y
+CONFIG_IP6_NF_FILTER=y
+CONFIG_IP6_NF_TARGET_REJECT=y
+CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
+CONFIG_IP6_NF_MANGLE=y
+CONFIG_IP6_NF_RAW=y
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
+CONFIG_PHONET=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_INGRESS=y
+CONFIG_NET_CLS_U32=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_U32=y
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=y
+CONFIG_NET_ACT_MIRRED=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM4325=y
+CONFIG_BT_AUTOSLEEP=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_RK=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_RKNAND=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_MISC_DEVICES=y
+CONFIG_UID_STAT=y
+CONFIG_APANIC=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN_80211=y
+CONFIG_RKWIFI=y
+CONFIG_USB_USBNET=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_XPAD=y
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=y
+CONFIG_TABLET_USB_AIPTEK=y
+CONFIG_TABLET_USB_GTCO=y
+CONFIG_TABLET_USB_HANWANG=y
+CONFIG_TABLET_USB_KBTAB=y
+CONFIG_TABLET_USB_WACOM=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT8XX=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_KEYCHORD=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_COMPASS_AK8975=y
+CONFIG_GS_MMA8452=y
+CONFIG_GS_LIS3DH=y
+CONFIG_GYRO_L3G4200D=y
+CONFIG_LS_CM3217=y
+CONFIG_SENSOR_DEVICE=y
+CONFIG_GSENSOR_DEVICE=y
+CONFIG_GS_KXTIK=y
+CONFIG_COMPASS_DEVICE=y
+CONFIG_GYROSCOPE_DEVICE=y
+CONFIG_LIGHT_DEVICE=y
+CONFIG_LS_AL3006=y
+CONFIG_LS_STK3171=y
+CONFIG_PROXIMITY_DEVICE=y
+CONFIG_PS_AL3006=y
+CONFIG_PS_STK3171=y
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_RK29=y
+CONFIG_UART0_RK29=y
+CONFIG_UART0_CTS_RTS_RK29=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C0_CONTROLLER_RK30=y
+CONFIG_I2C1_CONTROLLER_RK30=y
+CONFIG_I2C2_CONTROLLER_RK30=y
+CONFIG_I2C3_CONTROLLER_RK30=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WM831X=y
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+CONFIG_SPI_FPGA_GPIO_NUM=0
+CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
+CONFIG_POWER_SUPPLY=y
+CONFIG_TEST_POWER=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_MFD_TPS65090=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TPS65910=y
+CONFIG_REGULATOR_WM831X=y
+CONFIG_REGULATOR_ACT8846=y
+CONFIG_RK30_PWM_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_OV2659=y
+CONFIG_VIDEO_RK29=y
+CONFIG_VIDEO_RK29_CAMMEM_ION=y
+CONFIG_ION=y
+CONFIG_ION_ROCKCHIP=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FB_ROCKCHIP=y
+CONFIG_DUAL_LCDC_DUAL_DISP_IN_KERNEL=y
+CONFIG_LCD_B101EW05=y
+CONFIG_RK_TRSM=y
+CONFIG_RGA_RK30=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_RK29_SOC=y
+CONFIG_UHID=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_ACRUX=y
+CONFIG_HID_ACRUX_FF=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_DRAGONRISE_FF=y
+CONFIG_HID_EMS_FF=y
+CONFIG_HID_ELECOM=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KEYTOUCH=y
+CONFIG_HID_KYE=y
+CONFIG_HID_UCLOGIC=y
+CONFIG_HID_WALTOP=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LCPOWER=y
+CONFIG_HID_LOGITECH=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_LOGIG940_FF=y
+CONFIG_LOGIWII_FF=y
+CONFIG_HID_MAGICMOUSE=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_PICOLCD=y
+CONFIG_HID_QUANTA=y
+CONFIG_HID_ROCCAT_ARVO=y
+CONFIG_HID_ROCCAT_KONE=y
+CONFIG_HID_ROCCAT_KONEPLUS=y
+CONFIG_HID_ROCCAT_KOVAPLUS=y
+CONFIG_HID_ROCCAT_PYRA=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+CONFIG_GREENASIA_FF=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_SMARTJOYPLUS_FF=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_WACOM=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_HID_ZYDACRON=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_OPTION=y
+CONFIG_USB_GADGET=y
+CONFIG_USB20_HOST=y
+CONFIG_USB20_OTG=y
+CONFIG_DWC_OTG_BOTH_HOST_SLAVE=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_EMBEDDED_SDIO=y
+CONFIG_MMC_PARANOID_SD_INIT=y
+CONFIG_MMC_BLOCK_MINORS=12
+CONFIG_SDMMC_RK29=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_TPS65910_RTC=y
+CONFIG_STAGING=y
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+# CONFIG_CMMB is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
+# CONFIG_EXT4_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
+CONFIG_ENABLE_DEFAULT_TRACERS=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_TWOFISH=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
static void usb_uart_init(void)
{
#ifdef DEBUG_UART_BASE
+#ifdef CONFIG_ARCH_RK2928
#ifdef CONFIG_RK_USB_UART
writel_relaxed(0x04000000, RK2928_GRF_BASE + GRF_UOC1_CON4);
if(!(readl_relaxed(RK2928_GRF_BASE + 0x014c) & (1<<10)))//detect id
}
#else
writel_relaxed(0x34000000, RK2928_GRF_BASE + GRF_UOC1_CON4);
-#endif
+#endif // end of CONFIG_RK_USB_UART
writel_relaxed(0x07, DEBUG_UART_BASE + 0x88);
writel_relaxed(0x07, DEBUG_UART_BASE + 0x88);
writel_relaxed(0x00, DEBUG_UART_BASE + 0x04);
writel_relaxed(0x0d, DEBUG_UART_BASE + 0x00);
writel_relaxed(0x00, DEBUG_UART_BASE + 0x04);
writel_relaxed(0x03, DEBUG_UART_BASE + 0x0c);
-#endif
+#endif //end of CONFIG_ARCH_RK2928
+#ifdef CONFIG_ARCH_RK3026
+#ifdef CONFIG_RK_USB_UART
+ if (!(readl_relaxed(RK30_GRF_BASE + GRF_SOC_STATUS0) & (1 << 13))) { //detect id
+ writel_relaxed((0x0300 << 16), RK30_GRF_BASE + GRF_UOC0_CON0);
+ } else {
+ if (!(readl_relaxed(RK30_GRF_BASE + GRF_SOC_STATUS0) & (1 << 10))) { //detect vbus
+ writel_relaxed(((0x01 << 2) | ((0x01 << 2) << 16)), RK30_GRF_BASE + GRF_UOC0_CON2); //software control usb phy enable
+ writel_relaxed((0x2A | (0x3F << 16)), RK30_GRF_BASE + GRF_UOC0_CON3); //usb phy enter suspend
+ writel_relaxed((0x0300 | (0x0300 << 16)), RK30_GRF_BASE + GRF_UOC0_CON0);
+ } else {
+ writel_relaxed((0x0300 << 16), RK30_GRF_BASE + GRF_UOC0_CON0);
+ }
+ }
+#else
+ writel_relaxed((0x0300 << 16), RK30_GRF_BASE + GRF_UOC0_CON0);
+#endif //end of CONFIG_RK_USB_UART
+#endif //end of CONFIG_ARCH_RK3026
+#endif //end of DEBUG_UART_BASE
}
void __init rk2928_map_io(void)
rk2928_l2_cache_init();
ddr_init(DDR_TYPE, ddr_freq);
// clk_disable_unused();
+#ifdef CONFIG_ARCH_RK2928
rk2928_iomux_init();
+#endif
+#ifdef CONFIG_ARCH_RK3026
+ iomux_init();
+#endif
rk2928_boot_mode_init();
}
};
#endif
+#ifdef CONFIG_EMMC_RK
+static struct resource resources_emmc[] = {
+ {
+ .start = IRQ_EMMC,
+ .end = IRQ_EMMC,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = RK2928_EMMC_PHYS,
+ .end = RK2928_EMMC_PHYS + RK2928_EMMC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device device_emmc = {
+ .name = "emmc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resources_emmc),
+ .resource = resources_emmc,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+#endif
+
#ifdef CONFIG_SDMMC0_RK29
static struct resource resources_sdmmc0[] = {
{
#endif
static void __init rk2928_init_sdmmc(void)
{
+#ifdef CONFIG_EMMC_RK
+ platform_device_register(&device_emmc);
+#endif
#ifdef CONFIG_SDMMC0_RK29
platform_device_register(&device_sdmmc0);
#endif
rk30_pwm_logic_suspend_voltage();
board_pmu_suspend();
sram_printch('7');
-
+#ifdef CONFIG_ARCH_RK2928
grf_uoc1_con = grf_readl(GRF_UOC1_CON4);
grf_writel(0x30000000,GRF_UOC1_CON4);
+#endif
for (i = 0; i < CRU_CLKGATES_CON_CNT; i++) {
clkgt_regs[i] = cru_readl(CRU_CLKGATES_CON(i));
}
cru_writel(clkgt_regs[i] | 0xffff0000, CRU_CLKGATES_CON(i));
}
+#ifdef CONFIG_ARCH_RK2928
grf_writel(0x30000000|grf_uoc1_con,GRF_UOC1_CON4);
+#endif
sram_printch('7');
board_pmu_resume();
rk30_pwm_logic_resume_voltage();
obj-y += clock_data.o
obj-y += ../mach-rk2928/ddr.o
obj-y += ../mach-rk2928/reset.o
-obj-$(CONFIG_PM) += ../mach-rk30/pm.o
+obj-$(CONFIG_PM) += ../mach-rk2928/pm.o
endif
obj-y += ../mach-rk2928/common.o
CFLAGS_common.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
obj-$(CONFIG_HOTPLUG_CPU) += ../mach-rk30/hotplug.o
obj-$(CONFIG_CPU_IDLE) += ../mach-rk30/cpuidle.o
obj-$(CONFIG_CPU_FREQ) += ../mach-rk3188/cpufreq.o
-obj-$(CONFIG_DVFS) += dvfs.o
+obj-$(CONFIG_DVFS) += ../mach-rk2928/dvfs.o
obj-$(CONFIG_RK30_I2C_INSRAM) += ../mach-rk30/i2c_sram.o
obj-y += board.o
--- /dev/null
+#ifdef CONFIG_VIDEO_RK29
+#include <plat/rk_camera.h>
+/* Notes:
+
+Simple camera device registration:
+
+ new_camera_device(sensor_name,\ // sensor name, it is equal to CONFIG_SENSOR_X
+ face,\ // sensor face information, it can be back or front
+ pwdn_io,\ // power down gpio configuration, it is equal to CONFIG_SENSOR_POWERDN_PIN_XX
+ flash_attach,\ // sensor is attach flash or not
+ mir,\ // sensor image mirror and flip control information
+ i2c_chl,\ // i2c channel which the sensor attached in hardware, it is equal to CONFIG_SENSOR_IIC_ADAPTER_ID_X
+ cif_chl) \ // cif channel which the sensor attached in hardware, it is equal to CONFIG_SENSOR_CIF_INDEX_X
+
+Comprehensive camera device registration:
+
+ new_camera_device_ex(sensor_name,\
+ face,\
+ ori,\ // sensor orientation, it is equal to CONFIG_SENSOR_ORIENTATION_X
+ pwr_io,\ // sensor power gpio configuration, it is equal to CONFIG_SENSOR_POWER_PIN_XX
+ pwr_active,\ // sensor power active level, is equal to CONFIG_SENSOR_RESETACTIVE_LEVEL_X
+ rst_io,\ // sensor reset gpio configuration, it is equal to CONFIG_SENSOR_RESET_PIN_XX
+ rst_active,\ // sensor reset active level, is equal to CONFIG_SENSOR_RESETACTIVE_LEVEL_X
+ pwdn_io,\
+ pwdn_active,\ // sensor power down active level, is equal to CONFIG_SENSOR_POWERDNACTIVE_LEVEL_X
+ flash_attach,\
+ res,\ // sensor resolution, this is real resolution or resoltuion after interpolate
+ mir,\
+ i2c_chl,\
+ i2c_spd,\ // i2c speed , 100000 = 100KHz
+ i2c_addr,\ // the i2c slave device address for sensor
+ cif_chl,\
+ mclk)\ // sensor input clock rate, 24 or 48
+
+*/
+static struct rkcamera_platform_data new_camera[] = {
+ new_camera_device(RK29_CAM_SENSOR_OV5642,
+ back,
+ RK2928_PIN3_PB3,
+ 0,
+ 0,
+ 0,
+ 0),
+ new_camera_device_end
+};
+/*---------------- Camera Sensor Macro Define Begin ------------------------*/
+/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
+#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5642 /* back camera sensor */
+#define CONFIG_SENSOR_IIC_ADDR_0 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 0
+#define CONFIG_SENSOR_CIF_INDEX_0 0
+#define CONFIG_SENSOR_ORIENTATION_0 90
+#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_0 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_0 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_0 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_0 30000
+
+#define CONFIG_SENSOR_01 RK29_CAM_SENSOR_OV5642 /* back camera sensor 1 */
+#define CONFIG_SENSOR_IIC_ADDR_01 0x00
+#define CONFIG_SENSOR_CIF_INDEX_01 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_01 4
+#define CONFIG_SENSOR_ORIENTATION_01 90
+#define CONFIG_SENSOR_POWER_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_01 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_01 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_01 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_01 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_01 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_01 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_01 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_01 30000
+
+#define CONFIG_SENSOR_02 RK29_CAM_SENSOR_OV5640 /* back camera sensor 2 */
+#define CONFIG_SENSOR_IIC_ADDR_02 0x00
+#define CONFIG_SENSOR_CIF_INDEX_02 0
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_02 4
+#define CONFIG_SENSOR_ORIENTATION_02 90
+#define CONFIG_SENSOR_POWER_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_02 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_02 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_02 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_02 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_02 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_02 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_02 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_02 30000
+
+#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_OV2659 /* front camera sensor 0 */
+#define CONFIG_SENSOR_IIC_ADDR_1 0// 0x60
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3
+#define CONFIG_SENSOR_CIF_INDEX_1 0
+#define CONFIG_SENSOR_ORIENTATION_1 270
+#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_1 RK2928_PIN3_PB3
+#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_1 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_1 30000
+
+#define CONFIG_SENSOR_11 RK29_CAM_SENSOR_OV2659 /* front camera sensor 1 */
+#define CONFIG_SENSOR_IIC_ADDR_11 0x00
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_11 3
+#define CONFIG_SENSOR_CIF_INDEX_11 0
+#define CONFIG_SENSOR_ORIENTATION_11 270
+#define CONFIG_SENSOR_POWER_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_11 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_11 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_11 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_11 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_11 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_11 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_11 30000
+
+#define CONFIG_SENSOR_12 RK29_CAM_SENSOR_OV2659//RK29_CAM_SENSOR_OV2655 /* front camera sensor 2 */
+#define CONFIG_SENSOR_IIC_ADDR_12 0x00
+#define CONFIG_SENSOR_IIC_ADAPTER_ID_12 3
+#define CONFIG_SENSOR_CIF_INDEX_12 0
+#define CONFIG_SENSOR_ORIENTATION_12 270
+#define CONFIG_SENSOR_POWER_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_RESET_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_POWERDN_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_FALSH_PIN_12 INVALID_GPIO
+#define CONFIG_SENSOR_POWERACTIVE_LEVEL_12 RK29_CAM_POWERACTIVE_L
+#define CONFIG_SENSOR_RESETACTIVE_LEVEL_12 RK29_CAM_RESETACTIVE_L
+#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_12 RK29_CAM_POWERDNACTIVE_H
+#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_12 RK29_CAM_FLASHACTIVE_L
+
+#define CONFIG_SENSOR_QCIF_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_240X160_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_QVGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_CIF_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_VGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_480P_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_SVGA_FPS_FIXED_12 15000
+#define CONFIG_SENSOR_720P_FPS_FIXED_12 30000
+
+
+#endif //#ifdef CONFIG_VIDEO_RK29
+/*---------------- Camera Sensor Configuration Macro End------------------------*/
+#include "../../../drivers/media/video/rk2928_camera.c"
+/*---------------- Camera Sensor Macro Define End ---------*/
+
+#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
+/*****************************************************************************************
+ * camera devices
+ * author: ddl@rock-chips.com
+ *****************************************************************************************/
+#ifdef CONFIG_VIDEO_RK29
+#define CONFIG_SENSOR_POWER_IOCTL_USR 0 //define this refer to your board layout
+#define CONFIG_SENSOR_RESET_IOCTL_USR 0
+#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
+#define CONFIG_SENSOR_FLASH_IOCTL_USR 0
+
+static void rk_cif_power(int on)
+{
+ struct regulator *ldo_18,*ldo_28;
+ ldo_28 = regulator_get(NULL, "ldo7"); // vcc28_cif
+ ldo_18 = regulator_get(NULL, "ldo1"); // vcc18_cif
+ if (ldo_28 == NULL || IS_ERR(ldo_28) || ldo_18 == NULL || IS_ERR(ldo_18)){
+ printk("get cif ldo failed!\n");
+ return;
+ }
+ if(on == 0){
+ regulator_disable(ldo_28);
+ regulator_put(ldo_28);
+ regulator_disable(ldo_18);
+ regulator_put(ldo_18);
+ mdelay(500);
+ }
+ else{
+ regulator_set_voltage(ldo_28, 2800000, 2800000);
+ regulator_enable(ldo_28);
+ // printk("%s set ldo7 vcc28_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_28));
+ regulator_put(ldo_28);
+
+ regulator_set_voltage(ldo_18, 1800000, 1800000);
+ // regulator_set_suspend_voltage(ldo, 1800000);
+ regulator_enable(ldo_18);
+ // printk("%s set ldo1 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo_18));
+ regulator_put(ldo_18);
+ }
+}
+
+#if CONFIG_SENSOR_POWER_IOCTL_USR
+static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ //#error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
+ rk_cif_power(on);
+}
+#endif
+
+#if CONFIG_SENSOR_RESET_IOCTL_USR
+static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
+}
+#endif
+
+#if CONFIG_SENSOR_FLASH_IOCTL_USR
+static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on)
+{
+ #error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
+}
+#endif
+
+static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = {
+ #if CONFIG_SENSOR_POWER_IOCTL_USR
+ .sensor_power_cb = sensor_power_usr_cb,
+ #else
+ .sensor_power_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_RESET_IOCTL_USR
+ .sensor_reset_cb = sensor_reset_usr_cb,
+ #else
+ .sensor_reset_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
+ .sensor_powerdown_cb = sensor_powerdown_usr_cb,
+ #else
+ .sensor_powerdown_cb = NULL,
+ #endif
+
+ #if CONFIG_SENSOR_FLASH_IOCTL_USR
+ .sensor_flash_cb = sensor_flash_usr_cb,
+ #else
+ .sensor_flash_cb = NULL,
+ #endif
+};
+
+#if CONFIG_SENSOR_IIC_ADDR_0
+static struct reginfo_t rk_init_data_sensor_reg_0[] =
+{
+ {0x0000, 0x00,0,0}
+ };
+static struct reginfo_t rk_init_data_sensor_winseqreg_0[] ={
+ {0x0000, 0x00,0,0}
+ };
+#endif
+
+#if CONFIG_SENSOR_IIC_ADDR_1
+static struct reginfo_t rk_init_data_sensor_reg_1[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_1[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_01
+static struct reginfo_t rk_init_data_sensor_reg_01[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_01[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_02
+static struct reginfo_t rk_init_data_sensor_reg_02[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_02[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_11
+static struct reginfo_t rk_init_data_sensor_reg_11[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_11[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+#if CONFIG_SENSOR_IIC_ADDR_12
+static struct reginfo_t rk_init_data_sensor_reg_12[] =
+{
+ {0x0000, 0x00,0,0}
+};
+static struct reginfo_t rk_init_data_sensor_winseqreg_12[] =
+{
+ {0x0000, 0x00,0,0}
+};
+#endif
+static rk_sensor_user_init_data_s rk_init_data_sensor[RK_CAM_NUM] =
+{
+ #if CONFIG_SENSOR_IIC_ADDR_0
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_0,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_0,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_0) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_0) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_1
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_1,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_1,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_1) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_1) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_01
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_01,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_01,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_01) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_01) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_02
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_02,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_02,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_02) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_02) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_11
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_11,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_11,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_11) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_11) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+ #if CONFIG_SENSOR_IIC_ADDR_12
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = rk_init_data_sensor_reg_12,
+ .rk_sensor_init_winseq = rk_init_data_sensor_winseqreg_12,
+ .rk_sensor_winseq_size = sizeof(rk_init_data_sensor_winseqreg_12) / sizeof(struct reginfo_t),
+ .rk_sensor_init_data_size = sizeof(rk_init_data_sensor_reg_12) / sizeof(struct reginfo_t),
+ },
+ #else
+ {
+ .rk_sensor_init_width = INVALID_VALUE,
+ .rk_sensor_init_height = INVALID_VALUE,
+ .rk_sensor_init_bus_param = INVALID_VALUE,
+ .rk_sensor_init_pixelcode = INVALID_VALUE,
+ .rk_sensor_init_data = NULL,
+ .rk_sensor_init_winseq = NULL,
+ .rk_sensor_winseq_size = 0,
+ .rk_sensor_init_data_size = 0,
+ },
+ #endif
+
+ };
+#include "../../../drivers/media/video/rk2928_camera.c"
+
+#endif /* CONFIG_VIDEO_RK29 */
--- /dev/null
+/*****************************************************************************************
+ * arch/arm/mach-rkxx/baord-xxx-sdmmc-config.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description:
+ * define the gpio for SD-MMC-SDIO-Wifi functions according to your own projects.
+ *
+ * Author: Michael Xie
+ * 15 Jan,2013
+ * E-mail: xbw@rock-chips.com
+ *
+ ******************************************************************************************/
+
+/*
+** If you select the macro of CONFIG_SDMMC0_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB2 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC0_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_SDMMC1_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PB3 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC1_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_RK29_SDIO_IRQ_FROM_GPIO, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define RK29SDK_WIFI_SDIO_CARD_INT RK30_PIN3_PD2
+
+
+/*
+* define sdcard PowerEn-pin
+*/
+#define RK29SDK_SD_CARD_PWR_EN INVALID_GPIO
+#define RK29SDK_SD_CARD_PWR_EN_LEVEL GPIO_LOW
+int rk31sdk_get_sdmmc0_pin_io_voltage(void)
+{
+ int voltage;
+#define RK31SDK_SET_SDMMC0_PIN_VOLTAGE
+
+ /**************************************************************************************
+ ** Please tell me how much voltage of your SDMMC0-pin in your project.
+ **
+ ** ÀýÈç: ÓеÄÏîÄ¿£¬ËüµÄSDMMC0ËùÔÚµÄRKÖ÷¿ØµÄIO×飬ÏëÓÃ1.8V, ¶ø¿¨±¾ÉíÓÃ3.3V,
+ ** ¶øÖмäͨ¹ý¸öµçƽת»».ÄÇô£¬Äú´Ëʱ£¬Ó¦¸ÃÉèÖÃÏÂÃæµÄvoltageֵΪ 1.8V(¼´1800mv)
+ ***************************************************************************************/
+ voltage = 3300; //default the voltage 3300mv.
+
+ return voltage;
+}
+
+/*
+* define the card-detect-pin.
+*/
+#define RK29SDK_SD_CARD_DETECT_N RK30_PIN2_PA7 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+/*
+* Define wifi module's power and reset gpio, and gpio sensitive level.
+* Please set the value according to your own project.
+*
+* Well, you just own engineering module to set the value in the corresponding module branch.
+* Otherwise, you do not define this macro, eliminate it.
+*
+*/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_LOW//GPIO_HIGH
+
+#elif defined(CONFIG_BCM4330) || defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN2_PA7
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+#elif defined(CONFIG_MT5931_MT6622) || defined(CONFIG_MT5931)
+
+ #ifdef CONFIG_MACH_RK3168_LR097
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ //#define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ //#define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+ #else
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN0_PA5
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ #endif
+
+#elif defined(CONFIG_MT6620)
+ #define COMBO_MODULE_MT6620_CDT 1 // to control antsel2,antsel3 and gps_lan foot when using AcSip or Cdtech chip.
+ //- 1--use Cdtech chip; 0--unuse CDT chip
+
+ //power, PMU_EN
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PC7
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+ //reset, DAIRST,SYSRST_B
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ //VDDIO
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL RK30_PIN0_PD2 //You do not get control of the foot, and you do not need to define the macro
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE GPIO_HIGH
+ //WIFI_INT_B
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B RK30_PIN3_PD2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+ //BGF_INT_B
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B RK30_PIN6_PA7
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE GPIO_HIGH
+ //GPS_SYNC
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE GPIO_HIGH
+
+ #if COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #define RK30SDK_WIFI_GPIO_ANTSEL2 RK30_PIN4_PD4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE GPIO_LOW //use 6620 in CDT chip, LOW--work; High--no work.
+ //ANTSEL3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3 RK30_PIN4_PD3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ //GPS_LAN
+ #define RK30SDK_WIFI_GPIO_GPS_LAN RK30_PIN4_PD6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+#endif
+
+#ifndef RK30SDK_WIFI_GPIO_WIFI_INT_B
+#define RK30SDK_WIFI_GPIO_WIFI_INT_B INVALID_GPIO
+#define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+#endif
+
+int rk31sdk_get_sdio_wifi_voltage(void)
+{
+ int voltage;
+
+ /******************************************************************************
+ ** Please tell me how much wifi-module uses voltage in your project.
+ ******************************************************************************/
+#if defined(CONFIG_BCM4330) || defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ voltage = 1800 ; //power 1800mV
+
+#elif defined(CONFIG_MT5931_MT6622)||defined(CONFIG_MT5931)
+ voltage = 1800 ; //power 1800V
+#elif defined(CONFIG_MT6620)
+ voltage = 2800 ; //power 2800V
+#elif defined(CONFIG_RDA5990)||defined(CONFIG_RTL8723AS)
+ voltage = 3300 ; //power 3300V
+#else
+ //default, sdio use 3.0V
+ voltage = 3000 ; //power 3000V
+#endif
+
+ return voltage;
+}
+
+
+
--- /dev/null
+/*
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/ion.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/rk_fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/regulator/act8846.h>
+#include <linux/regulator/rk29-pwm-regulator.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/dvfs.h>
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#if defined(CONFIG_SPIM_RK29)
+#include "../../../drivers/spi/rk29_spim.h"
+#endif
+
+#if defined(CONFIG_RK_HDMI)
+ #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
+#endif
+
+#include "board-rk3026-tb-camera.c"
+
+/***********************************************************
+* board config
+************************************************************/
+//system power on
+#define POWER_ON_PIN RK2928_PIN1_PA2 //PWR_HOLD
+
+//touchscreen
+#define TOUCH_RST_PIN RK2928_PIN2_PB0
+#define TOUCH_RST_VALUE GPIO_HIGH
+#define TOUCH_PWR_PIN RK2928_PIN2_PB3
+#define TOUCH_PWR_VALUE GPIO_LOW
+#define TOUCH_INT_PIN RK2928_PIN1_PB0
+
+//backlight
+#define LCD_DISP_ON_PIN
+#define BL_PWM 0 // (0 ~ 2)
+#define PWM_EFFECT_VALUE 1
+#define BL_EN_PIN RK2928_PIN2_PC1
+#define BL_EN_VALUE GPIO_HIGH
+
+//fb
+#define LCD_EN_PIN RK2928_PIN1_PB3
+#define LCD_EN_VALUE GPIO_HIGH
+#define LCD_CS_PIN INVALID_GPIO
+#define LCD_CS_VALUE GPIO_HIGH
+
+//gsensor
+#define GS_INT_PIN RK2928_PIN1_PB2
+
+//sdmmc
+//Reference to board-rk3026-tb-sdmmc-config.c
+
+//keyboard
+//#define RK31XX_MAINBOARD_V1 //if mainboard is RK31XX_MAINBOARD_V1.0
+#define PLAY_ON_PIN RK2928_PIN1_PA4 //wakeup key
+
+//pwm regulator
+#define REG_PWM 1 // (0 ~ 2)
+
+//pmic
+#define PMU_INT_PIN RK2928_PIN1_PB1
+#define PMU_SLEEP_PIN RK2928_PIN1_PA1
+
+//ion reserve memory
+#define ION_RESERVE_SIZE (80 * SZ_1M)
+
+static int pwm_mode[] = {PWM0, PWM1, PWM2};
+static inline int rk_gpio_request(int gpio, int direction, int value, const char *label)
+{
+ int ret = 0;
+ unsigned long flags = 0;
+
+ if(!gpio_is_valid(gpio))
+ return 0;
+
+ if(direction == GPIOF_DIR_IN)
+ flags = GPIOF_IN;
+ else if(value == GPIO_LOW)
+ flags = GPIOF_OUT_INIT_LOW;
+ else
+ flags = GPIOF_OUT_INIT_HIGH;
+
+ ret = gpio_request_one(gpio, flags, label);
+ if(ret < 0)
+ pr_err("Failed to request '%s'\n", label);
+
+ return ret;
+}
+
+static struct spi_board_info board_spi_devices[] = {
+};
+
+/***********************************************************
+* touchscreen
+************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_GT8XX)
+static int goodix_init_platform_hw(void)
+{
+ int ret = 0;
+
+ ret = rk_gpio_request(TOUCH_PWR_PIN, GPIOF_DIR_OUT, TOUCH_PWR_VALUE, "touch_pwr");
+ if(ret < 0)
+ return ret;
+ msleep(100);
+
+ ret = rk_gpio_request(TOUCH_RST_PIN, GPIOF_DIR_OUT, TOUCH_RST_VALUE, "touch_rst");
+ if(ret < 0)
+ return ret;
+ msleep(100);
+
+ return 0;
+}
+
+struct goodix_platform_data goodix_info = {
+ .model = 8105,
+ .irq_pin = TOUCH_INT_PIN,
+ .rest_pin = TOUCH_RST_PIN,
+ .init_platform_hw = goodix_init_platform_hw,
+};
+#endif
+
+/***********************************************************
+* rk30 backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+
+ iomux_set(pwm_mode[BL_PWM]);
+#ifdef LCD_DISP_ON_PIN
+ ret = rk_gpio_request(BL_EN_PIN, GPIOF_DIR_OUT, BL_EN_VALUE, "bl_en");
+ if(ret < 0)
+ return ret;
+#endif
+ return 0;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int pwm_gpio;
+#ifdef LCD_DISP_ON_PIN
+ gpio_free(BL_EN_PIN);
+#endif
+ pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+ return rk_gpio_request(BL_EN_PIN, GPIOF_DIR_OUT, GPIO_LOW, "BL_PWM");
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+ int ret, pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+
+ ret = rk_gpio_request(pwm_gpio, GPIOF_DIR_OUT, GPIO_LOW, "BL_PWM");
+ if(ret < 0)
+ return ret;
+#ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+ int pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+
+ gpio_free(pwm_gpio);
+ iomux_set(pwm_mode[BL_PWM]);
+#ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = BL_PWM,
+ .min_brightness=20,
+ .max_brightness=255,
+ .brightness_mode = BRIGHTNESS_MODE_CONIC,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+static struct platform_device rk29_device_backlight = {
+ .name = "rk29_backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
+};
+#endif
+
+/***********************************************************
+* fb
+************************************************************/
+#ifdef CONFIG_FB_ROCKCHIP
+static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+ int ret = 0;
+
+ ret = rk_gpio_request(LCD_CS_PIN, GPIOF_DIR_OUT, LCD_CS_VALUE, "lcd_cs");
+ if(ret < 0)
+ return ret;
+
+ return rk_gpio_request(LCD_EN_PIN, GPIOF_DIR_OUT, LCD_EN_VALUE, "lcd_en");
+}
+
+static int rk_fb_io_disable(void)
+{
+ gpio_set_value(LCD_CS_PIN, !LCD_CS_VALUE);
+ gpio_set_value(LCD_EN_PIN, !LCD_EN_VALUE);
+
+ return 0;
+}
+
+static int rk_fb_io_enable(void)
+{
+ gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
+ gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
+
+ return 0;
+}
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+struct rk29fb_info lcdc0_screen_info = {
+ #if defined(CONFIG_RK_HDMI)
+ .prop = EXTEND, //extend display device
+ .lcd_info = NULL,
+ .set_screen_info = hdmi_init_lcdc,
+ #endif
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+struct rk29fb_info lcdc1_screen_info = {
+ .prop = PRMRY, //primary display device
+ .io_init = rk_fb_io_init,
+ .io_disable = rk_fb_io_disable,
+ .io_enable = rk_fb_io_enable,
+ .set_screen_info = set_lcd_info,
+
+};
+#endif
+
+static struct resource resource_fb[] = {
+ [0] = {
+ .name = "fb0 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "ipp buf", //for rotate
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "fb2 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device device_fb = {
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
+};
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+static struct resource resource_lcdc0[] = {
+ [0] = {
+ .name = "lcdc0 reg",
+ .start = RK30_LCDC0_PHYS,
+ .end = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "lcdc0 irq",
+ .start = IRQ_LCDC0,
+ .end = IRQ_LCDC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc0 = {
+ .name = "rk30-lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resource_lcdc0),
+ .resource = resource_lcdc0,
+ .dev = {
+ .platform_data = &lcdc0_screen_info,
+ },
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+static struct resource resource_lcdc1[] = {
+ [0] = {
+ .name = "lcdc1 reg",
+ .start = RK30_LCDC1_PHYS,
+ .end = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "lcdc1 irq",
+ .start = IRQ_LCDC1,
+ .end = IRQ_LCDC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc1 = {
+ .name = "rk30-lcdc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resource_lcdc1),
+ .resource = resource_lcdc1,
+ .dev = {
+ .platform_data = &lcdc1_screen_info,
+ },
+};
+#endif
+
+static int rk_platform_add_display_devices(void)
+{
+ struct platform_device *fb = NULL; //fb
+ struct platform_device *lcdc0 = NULL; //lcdc0
+ struct platform_device *lcdc1 = NULL; //lcdc1
+ struct platform_device *bl = NULL; //backlight
+#ifdef CONFIG_FB_ROCKCHIP
+ fb = &device_fb;
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+ lcdc0 = &device_lcdc0,
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+ lcdc1 = &device_lcdc1,
+#endif
+
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ bl = &rk29_device_backlight,
+#endif
+ __rk_platform_add_display_devices(fb,lcdc0,lcdc1,bl);
+
+ return 0;
+}
+
+
+/***********************************************************
+* gsensor
+************************************************************/
+#if defined (CONFIG_GS_MMA8452)
+static int mma8452_init_platform_hw(void)
+{
+ return 0;
+}
+
+static struct sensor_platform_data mma8452_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = mma8452_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, -1, 0, 0, 0, 1},
+};
+#endif
+
+/***********************************************************
+* keyboard
+************************************************************/
+#include <plat/key.h>
+
+static struct rk29_keys_button key_button[] = {
+#ifdef RK31XX_MAINBOARD_V1
+ {
+ .desc = "vol-",
+ .code = KEY_VOLUMEDOWN,
+ .adc_value = 744,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "play",
+ .code = KEY_POWER,
+ .gpio = PLAY_ON_PIN,
+ .active_low = PRESS_LEV_LOW,
+ .wakeup = 1,
+ },
+ {
+ .desc = "vol+",
+ .code = KEY_VOLUMEUP,
+ .adc_value = 558,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "menu",
+ .code = EV_MENU,
+ .adc_value = 1,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "home",
+ .code = KEY_HOME,
+ .adc_value = 354,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "esc",
+ .code = KEY_BACK,
+ .adc_value = 169,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+#else
+ {
+ .desc = "vol-",
+ .code = KEY_VOLUMEDOWN,
+ .adc_value = 900,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "play",
+ .code = KEY_POWER,
+ .gpio = PLAY_ON_PIN,
+ .active_low = PRESS_LEV_LOW,
+ .wakeup = 1,
+ },
+ {
+ .desc = "vol+",
+ .code = KEY_VOLUMEUP,
+ .adc_value = 1,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "menu",
+ .code = EV_MENU,
+ .adc_value = 133,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "home",
+ .code = KEY_HOME,
+ .adc_value = 550,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "esc",
+ .code = KEY_BACK,
+ .adc_value = 333,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "camera",
+ .code = KEY_CAMERA,
+ .adc_value = 742,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+#endif
+};
+
+struct rk29_keys_platform_data rk29_keys_pdata = {
+ .buttons = key_button,
+ .nbuttons = ARRAY_SIZE(key_button),
+ .chn = 1, //chn: 0-7, if do not use ADC,set 'chn' -1
+};
+
+/***********************************************************
+* sdmmc
+************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk3026-tb-sdmmc-config.c"
+#include "../plat-rk/rk-sdmmc-ops.c"
+#include "../plat-rk/rk-sdmmc-wifi.c"
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+#define CONFIG_SDMMC0_USE_DMA
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+ #if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ iomux_set_gpio_mode(iomux_gpio_to_mode(RK29SDK_SD_CARD_DETECT_N));
+ #else
+ iomux_set(MMC0_DETN);
+ #endif
+
+ #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+ #endif
+ return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+
+ .set_iomux = rk29_sdmmc_set_iomux,
+
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) && defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+ .status = rk29sdk_wifi_mmc0_status,
+ .register_status_notify = rk29sdk_wifi_mmc0_status_register,
+#endif
+
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+ .power_en = RK29SDK_SD_CARD_PWR_EN,
+ .power_en_level = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+#else
+ .power_en = INVALID_GPIO,
+ .power_en_level = GPIO_LOW,
+#endif
+ .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+ .write_prt_enalbe_level = SDMMC0_WRITE_PROTECT_ENABLE_VALUE;
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+
+ .det_pin_info = {
+ #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N, //INVALID_GPIO,
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+ #endif
+ },
+
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SDMMC1_RK29
+#define CONFIG_SDMMC1_USE_DMA
+static int rk29_sdmmc1_cfg_gpio(void)
+{
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
+ gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
+#endif
+ return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc1_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34),
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#else
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#endif
+
+ .io_init = rk29_sdmmc1_cfg_gpio,
+
+ .set_iomux = rk29_sdmmc_set_iomux,
+
+ .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_CONTROL_FUNC) || defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+ .status = rk29sdk_wifi_status,
+ .register_status_notify = rk29sdk_wifi_status_register,
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC1_WRITE_PROTECT_PIN,
+ .write_prt_enalbe_level = SDMMC1_WRITE_PROTECT_ENABLE_VALUE;
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+
+ #if defined(CONFIG_RK29_SDIO_IRQ_FROM_GPIO)
+ .sdio_INT_gpio = RK29SDK_WIFI_SDIO_CARD_INT,
+ #endif
+
+ .det_pin_info = {
+ #if defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N,
+ #else
+ .io = INVALID_GPIO,
+ #endif
+
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+ #endif
+ },
+ .enable_sd_wakeup = 0,
+};
+#endif //endif--#ifdef CONFIG_SDMMC1_RK29
+
+
+
+/***********************************************************
+* ion
+************************************************************/
+#ifdef CONFIG_ION
+static struct ion_platform_data rk30_ion_pdata = {
+ .nr = 1,
+ .heaps = {
+ {
+ .type = ION_HEAP_TYPE_CARVEOUT,
+ .id = ION_NOR_HEAP_ID,
+ .name = "norheap",
+ .size = ION_RESERVE_SIZE,
+ }
+ },
+};
+
+static struct platform_device device_ion = {
+ .name = "ion-rockchip",
+ .id = 0,
+ .dev = {
+ .platform_data = &rk30_ion_pdata,
+ },
+};
+#endif
+
+/***********************************************************
+* pwm regulator
+************************************************************/
+#ifdef CONFIG_RK30_PWM_REGULATOR
+static int pwm_voltage_map[] = {
+ 800000, 825000, 850000, 875000, 900000, 925000 ,
+ 950000, 975000, 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000, 1200000, 1225000,
+ 1250000, 1275000, 1300000, 1325000, 1350000, 1375000
+};
+
+static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
+ {
+ .supply = "vdd_core",
+ }
+};
+
+struct regulator_init_data pwm_regulator_init_dcdc[1] = {
+ {
+ .constraints = {
+ .name = "PWM_DCDC1",
+ .min_uV = 600000,
+ .max_uV = 1800000, //0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
+ .consumer_supplies = pwm_dcdc1_consumers,
+ },
+};
+
+static struct pwm_platform_data pwm_regulator_info[1] = {
+ {
+ .pwm_id = REG_PWM,
+ .pwm_voltage = 1200000,
+ .suspend_voltage = 1050000,
+ .min_uV = 950000,
+ .max_uV = 1400000,
+ .coefficient = 504, //50.4%
+ .pwm_voltage_map = pwm_voltage_map,
+ .init_data = &pwm_regulator_init_dcdc[0],
+ },
+};
+struct platform_device pwm_regulator_device[1] = {
+ {
+ .name = "pwm-voltage-regulator",
+ .id = 0,
+ .dev = {
+ .platform_data = &pwm_regulator_info[0],
+ }
+ },
+};
+
+static void pwm_regulator_init(void)
+{
+ pwm_regulator_info[0].pwm_gpio = iomux_mode_to_gpio(pwm_mode[REG_PWM]);
+ pwm_regulator_info[0].pwm_iomux_pwm = pwm_mode[REG_PWM];
+ pwm_regulator_info[0].pwm_iomux_gpio = iomux_switch_gpio_mode(pwm_mode[REG_PWM]);
+}
+#endif
+
+int __sramdata pwm_iomux, pwm_do, pwm_dir, pwm_en;
+#define grf_readl(offset) readl_relaxed(RK30_GRF_BASE + offset)
+#define grf_writel(v, offset) do { writel_relaxed(v, RK30_GRF_BASE + offset); dsb(); } while (0)
+
+#define GPIO0_D2_OFFSET 10
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ #if 0
+ /* pwm0: GPIO0_D2, pwm1: GPIO0_D3, pwm2: GPIO0_D4 */
+ int off = GPIO0_D2_OFFSET + REG_PWM;
+
+ sram_udelay(10000);
+ pwm_iomux = grf_readl(GRF_GPIO0D_IOMUX);
+ pwm_dir = grf_readl(GRF_GPIO0H_DIR);
+ pwm_do = grf_readl(GRF_GPIO0H_DO);
+ pwm__en = grf_readl(GRF_GPIO0H_EN);
+
+ grf_writel((1<<(2 * off), GRF_GPIO0D_IOMUX);
+ grf_writel((1<<(16 + off))|(1<<off), GRF_GPIO0H_DIR);
+ grf_writel((1<<(16 + off))|(1<<off), GRF_GPIO0H_DO);
+ #endif
+#endif
+}
+
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ #if 0
+ /* pwm0: GPIO0_D2, pwm1: GPIO0_D3, pwm2: GPIO0_D4 */
+ int off = GPIO0_D2_OFFSET + REG_PWM;
+
+ grf_writel((1<<(2 * off))|pwm_iomux, GRF_GPIO0D_IOMUX);
+ grf_writel(((1<<(16 + off))|pwm_dir), GRF_GPIO0L_DIR);
+ grf_writel(((1<<(16 + off))|pwm_do), GRF_GPIO0L_DO);
+ grf_writel(((1<<(16 + off))|pwm_en), GRF_GPIO0L_EN);
+ sram_udelay(10000);
+ #endif
+#endif
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+
+void rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_suspend_voltage();
+#endif
+}
+
+void rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_resume_voltage();
+#endif
+}
+
+/***********************************************************
+* pmic
+************************************************************/
+int __sramdata g_pmic_type = 0;
+
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ PMU_INT_PIN
+#define PMU_POWER_SLEEP PMU_SLEEP_PIN
+static struct pmu_info tps65910_dcdc_info[] = {
+ {
+ .name = "vdd_cpu",
+ .min_uv = 1200000,
+ .max_uv = 1200000,
+ },
+ {
+ .name = "vdd2",
+ .min_uv = 1200000,
+ .max_uv = 1200000,
+ },
+ {
+ .name = "vio",
+ .min_uv = 3300000,
+ .max_uv = 3300000,
+ },
+};
+
+static struct pmu_info tps65910_ldo_info[] = {
+ {
+ .name = "vpll",
+ .min_uv = 2500000,
+ .max_uv = 2500000,
+ },
+ {
+ .name = "vdig1",
+ .min_uv = 1800000,
+ .max_uv = 1800000,
+ },
+ {
+ .name = "vdac",
+ .min_uv = 1800000,
+ .max_uv = 1800000,
+ },
+};
+#include "../mach-rk30/board-pmu-tps65910.c"
+#endif
+
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_suspend();
+ #endif
+}
+
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_resume();
+ #endif
+}
+
+/***********************************************************
+* i2c
+************************************************************/
+#ifdef CONFIG_I2C0_RK30
+static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_GS_MMA8452)
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1d,
+ .flags = 0,
+ .irq = GS_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C1_RK30
+static struct i2c_board_info __initdata i2c1_info[] = {
+#if defined (CONFIG_MFD_TPS65910)
+ {
+ .type = "tps65910",
+ .addr = TPS65910_I2C_ID0,
+ .flags = 0,
+ .irq = TPS65910_HOST_IRQ,
+ .platform_data = &tps65910_data,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C2_RK30
+static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT8XX)
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags = 0,
+ .irq = TOUCH_INT_PIN,
+ .platform_data = &goodix_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C3_RK30
+static struct i2c_board_info __initdata i2c3_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C_GPIO_RK30
+#define I2C_SDA_PIN INVALID_GPIO// RK2928_PIN2_PD6 //set sda_pin here
+#define I2C_SCL_PIN INVALID_GPIO//RK2928_PIN2_PD7 //set scl_pin here
+static int rk30_i2c_io_init(void)
+{
+ return 0;
+}
+
+struct i2c_gpio_platform_data default_i2c_gpio_data = {
+ .sda_pin = I2C_SDA_PIN,
+ .scl_pin = I2C_SCL_PIN,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(100),
+ .bus_num = 5,
+ .io_init = rk30_i2c_io_init,
+};
+
+static struct i2c_board_info __initdata i2c_gpio_info[] = {
+};
+#endif
+
+static void __init rk30_i2c_register_board_info(void)
+{
+#ifdef CONFIG_I2C0_RK30
+ i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
+#endif
+#ifdef CONFIG_I2C1_RK30
+ i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
+#endif
+#ifdef CONFIG_I2C2_RK30
+ i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
+#endif
+#ifdef CONFIG_I2C3_RK30
+ i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+ i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
+#endif
+}
+
+/***********************************************************
+* board init
+************************************************************/
+static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_ION
+ &device_ion,
+#endif
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ &rk29sdk_wifi_device,
+#endif
+};
+
+static void rk30_pm_power_off(void)
+{
+#if defined(CONFIG_MFD_TPS65910)
+ tps65910_device_shutdown();//tps65910 shutdown
+#endif
+ gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+ while(1);
+}
+
+static void __init machine_rk30_board_init(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_regulator_init();
+#endif
+ avs_init();
+ pm_power_off = rk30_pm_power_off;
+ rk_gpio_request(POWER_ON_PIN, GPIOF_DIR_OUT, GPIO_HIGH, "system power on");
+ rk30_i2c_register_board_info();
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ rk_platform_add_display_devices();
+}
+
+static void __init rk30_reserve(void)
+{
+ //fb reserve
+#ifdef CONFIG_FB_ROCKCHIP
+ resource_fb[0].start = board_mem_reserve_add("fb0 buf", get_fb_size());
+ resource_fb[0].end = resource_fb[0].start + get_fb_size()- 1;
+ #if 0
+ resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
+ resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
+ #endif
+
+ #if defined(CONFIG_FB_ROTATE) || !defined(CONFIG_THREE_FB_BUFFER)
+ resource_fb[2].start = board_mem_reserve_add("fb2 buf",get_fb_size());
+ resource_fb[2].end = resource_fb[2].start + get_fb_size() - 1;
+ #endif
+#endif
+ //ion reserve
+#ifdef CONFIG_ION
+ rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
+#endif
+ board_mem_reserved();
+}
+
+/***********************************************************
+* clock
+************************************************************/
+static struct cpufreq_frequency_table dvfs_arm_table[] = {
+ {.frequency = 312 * 1000, .index = 1200 * 1000},
+ {.frequency = 504 * 1000, .index = 1200 * 1000},
+ {.frequency = 816 * 1000, .index = 1200 * 1000},
+ {.frequency = 1008 * 1000, .index = 1200 * 1000},
+ {.frequency = 1200 * 1000, .index = 1200 * 1000},
+ {.frequency = 1416 * 1000, .index = 1200 * 1000},
+ {.frequency = 1608 * 1000, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_gpu_table[] = {
+ {.frequency = 100 * 1000, .index = 1200 * 1000},
+ {.frequency = 200 * 1000, .index = 1200 * 1000},
+ {.frequency = 266 * 1000, .index = 1200 * 1000},
+ {.frequency = 300 * 1000, .index = 1200 * 1000},
+ {.frequency = 400 * 1000, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_ddr_table[] = {
+ {.frequency = 200 * 1000 + DDR_FREQ_SUSPEND, .index = 1200 * 1000},
+ {.frequency = 300 * 1000 + DDR_FREQ_VIDEO, .index = 1200 * 1000},
+ {.frequency = 400 * 1000 + DDR_FREQ_NORMAL, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+void __init board_clock_init(void)
+{
+ rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
+ //dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "cpu"), dvfs_arm_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
+}
+
+/************************ end *****************************/
+MACHINE_START(RK30, "RK30board")
+ .boot_params = PLAT_PHYS_OFFSET + 0x800,
+ .fixup = rk2928_fixup,
+ .reserve = &rk30_reserve,
+ .map_io = rk2928_map_io,
+ .init_irq = rk2928_init_irq,
+ .timer = &rk2928_timer,
+ .init_machine = machine_rk30_board_init,
+MACHINE_END
--- /dev/null
+/*****************************************************************************************
+ * arch/arm/mach-rkxx/baord-xxx-sdmmc-config.c
+ *
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * Description:
+ * define the gpio for SD-MMC-SDIO-Wifi functions according to your own projects.
+ *
+ * Author: Michael Xie
+ * 15 Jan,2013
+ * E-mail: xbw@rock-chips.com
+ *
+ ******************************************************************************************/
+
+/*
+** If you select the macro of CONFIG_SDMMC0_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB2 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC0_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_SDMMC1_RK29_WRITE_PROTECT, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PB3 //According to your own project to set the value of write-protect-pin.
+//#define SDMMC1_WRITE_PROTECT_ENABLE_VALUE GPIO_HIGH
+
+/*
+** If you select the macro of CONFIG_RK29_SDIO_IRQ_FROM_GPIO, You must define the following values.
+** Otherwise, there is no need to define the following values¡£
+*/
+//#define RK29SDK_WIFI_SDIO_CARD_INT RK30_PIN3_PD2
+
+
+/*
+* define sdcard PowerEn-pin
+*/
+#define RK29SDK_SD_CARD_PWR_EN RK30_PIN3_PA1
+#define RK29SDK_SD_CARD_PWR_EN_LEVEL GPIO_LOW
+int rk31sdk_get_sdmmc0_pin_io_voltage(void)
+{
+ int voltage;
+#define RK31SDK_SET_SDMMC0_PIN_VOLTAGE
+
+ /**************************************************************************************
+ ** Please tell me how much voltage of your SDMMC0-pin in your project.
+ **
+ ** ÀýÈç: ÓеÄÏîÄ¿£¬ËüµÄSDMMC0ËùÔÚµÄRKÖ÷¿ØµÄIO×飬ÏëÓÃ1.8V, ¶ø¿¨±¾ÉíÓÃ3.3V,
+ ** ¶øÖмäͨ¹ý¸öµçƽת»».ÄÇô£¬Äú´Ëʱ£¬Ó¦¸ÃÉèÖÃÏÂÃæµÄvoltageֵΪ 1.8V(¼´1800mv)
+ ***************************************************************************************/
+ voltage = 3300; //default the voltage 3300mv.
+
+ return voltage;
+}
+
+/*
+* define the card-detect-pin.
+*/
+#define RK29SDK_SD_CARD_DETECT_N RK30_PIN3_PB0 //According to your own project to set the value of card-detect-pin.
+#define RK29SDK_SD_CARD_INSERT_LEVEL GPIO_LOW // set the voltage of insert-card. Please pay attention to the default setting.
+
+/*
+* Define wifi module's power and reset gpio, and gpio sensitive level.
+* Please set the value according to your own project.
+*
+* Well, you just own engineering module to set the value in the corresponding module branch.
+* Otherwise, you do not define this macro, eliminate it.
+*
+*/
+#if defined(CONFIG_RTL8192CU) || defined(CONFIG_RTL8188EU)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_LOW//GPIO_HIGH
+
+#elif defined(CONFIG_BCM4330) || defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN2_PA7
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+#elif defined(CONFIG_MT5931_MT6622) || defined(CONFIG_MT5931)
+
+ #ifdef CONFIG_MACH_RK3168_LR097
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ //#define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ //#define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+
+ #else
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN0_PA5
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ #endif
+
+#elif defined(CONFIG_MT6620)
+ #define COMBO_MODULE_MT6620_CDT 1 // to control antsel2,antsel3 and gps_lan foot when using AcSip or Cdtech chip.
+ //- 1--use Cdtech chip; 0--unuse CDT chip
+
+ //power, PMU_EN
+ #define RK30SDK_WIFI_GPIO_POWER_N RK30_PIN3_PC7
+ #define RK30SDK_WIFI_GPIO_POWER_ENABLE_VALUE GPIO_HIGH
+ //reset, DAIRST,SYSRST_B
+ #define RK30SDK_WIFI_GPIO_RESET_N RK30_PIN3_PD1
+ #define RK30SDK_WIFI_GPIO_RESET_ENABLE_VALUE GPIO_HIGH
+ //VDDIO
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL RK30_PIN0_PD2 //You do not get control of the foot, and you do not need to define the macro
+ //#define RK30SDK_WIFI_GPIO_VCCIO_WL_ENABLE_VALUE GPIO_HIGH
+ //WIFI_INT_B
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B RK30_PIN3_PD2
+ #define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+ //BGF_INT_B
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B RK30_PIN6_PA7
+ #define RK30SDK_WIFI_GPIO_BGF_INT_B_ENABLE_VALUE GPIO_HIGH
+ //GPS_SYNC
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC RK30_PIN3_PD0
+ #define RK30SDK_WIFI_GPIO_GPS_SYNC_ENABLE_VALUE GPIO_HIGH
+
+ #if COMBO_MODULE_MT6620_CDT
+ //ANTSEL2
+ #define RK30SDK_WIFI_GPIO_ANTSEL2 RK30_PIN4_PD4
+ #define RK30SDK_WIFI_GPIO_ANTSEL2_ENABLE_VALUE GPIO_LOW //use 6620 in CDT chip, LOW--work; High--no work.
+ //ANTSEL3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3 RK30_PIN4_PD3
+ #define RK30SDK_WIFI_GPIO_ANTSEL3_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ //GPS_LAN
+ #define RK30SDK_WIFI_GPIO_GPS_LAN RK30_PIN4_PD6
+ #define RK30SDK_WIFI_GPIO_GPS_LAN_ENABLE_VALUE GPIO_HIGH //use 6620 in CDT chip, High--work; Low--no work..
+ #endif // #if COMBO_MODULE_MT6620_CDT--#endif
+#endif
+
+#ifndef RK30SDK_WIFI_GPIO_WIFI_INT_B
+#define RK30SDK_WIFI_GPIO_WIFI_INT_B INVALID_GPIO
+#define RK30SDK_WIFI_GPIO_WIFI_INT_B_ENABLE_VALUE GPIO_HIGH
+#endif
+
+int rk31sdk_get_sdio_wifi_voltage(void)
+{
+ int voltage;
+
+ /******************************************************************************
+ ** Please tell me how much wifi-module uses voltage in your project.
+ ******************************************************************************/
+#if defined(CONFIG_BCM4330) || defined(CONFIG_BCM4329) || defined(CONFIG_BCM4319) || defined(CONFIG_RK903) || defined(CONFIG_RK901)
+ voltage = 1800 ; //power 1800mV
+
+#elif defined(CONFIG_MT5931_MT6622)||defined(CONFIG_MT5931)
+ voltage = 1800 ; //power 1800V
+#elif defined(CONFIG_MT6620)
+ voltage = 2800 ; //power 2800V
+#elif defined(CONFIG_RDA5990)||defined(CONFIG_RTL8723AS)
+ voltage = 3300 ; //power 3300V
+#else
+ //default, sdio use 3.0V
+ voltage = 3000 ; //power 3000V
+#endif
+
+ return voltage;
+}
+
+
+
--- /dev/null
+/*
+ * Copyright (C) 2013 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/skbuff.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+#include <linux/ion.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/rk_fb.h>
+#include <linux/regulator/machine.h>
+#include <linux/rfkill-rk.h>
+#include <linux/sensor-dev.h>
+#include <linux/mfd/tps65910.h>
+#include <linux/regulator/act8846.h>
+#include <linux/regulator/rk29-pwm-regulator.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+#include <asm/hardware/gic.h>
+
+#include <mach/dvfs.h>
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#if defined(CONFIG_SPIM_RK29)
+#include "../../../drivers/spi/rk29_spim.h"
+#endif
+
+#if defined(CONFIG_RK_HDMI)
+ #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
+#endif
+
+#include "board-rk3026-tb-camera.c"
+
+/***********************************************************
+* board config
+************************************************************/
+//system power on
+#define POWER_ON_PIN RK2928_PIN0_PD5 //PWR_HOLD
+
+//touchscreen
+#define TOUCH_RST_PIN RK2928_PIN0_PC1
+#define TOUCH_RST_VALUE GPIO_HIGH
+#define TOUCH_PWR_PIN RK2928_PIN2_PC6
+#define TOUCH_PWR_VALUE GPIO_LOW
+#define TOUCH_INT_PIN RK2928_PIN0_PB4
+
+//backlight
+#define LCD_DISP_ON_PIN
+#define BL_PWM 0 // (0 ~ 2)
+#define PWM_EFFECT_VALUE 1
+#define BL_EN_PIN RK2928_PIN0_PC0
+#define BL_EN_VALUE GPIO_HIGH
+
+//fb
+#define LCD_EN_PIN RK2928_PIN0_PB6
+#define LCD_EN_VALUE GPIO_HIGH
+#define LCD_CS_PIN INVALID_GPIO
+#define LCD_CS_VALUE GPIO_HIGH
+
+//gsensor
+#define GS_INT_PIN RK2928_PIN0_PB1
+
+//sdmmc
+//Reference to board-rk3028a-tb-sdmmc-config.c
+
+//keyboard
+//#define RK31XX_MAINBOARD_V1 //if mainboard is RK31XX_MAINBOARD_V1.0
+#define PLAY_ON_PIN RK2928_PIN1_PB4 //wakeup key
+
+//pwm regulator
+#define REG_PWM 1 // (0 ~ 2)
+
+//pmic
+#define PMU_INT_PIN RK2928_PIN0_PB5
+#define PMU_SLEEP_PIN RK2928_PIN1_PB5
+
+//ion reserve memory
+#define ION_RESERVE_SIZE (80 * SZ_1M)
+
+static int pwm_mode[] = {PWM0, PWM1, PWM2};
+static inline int rk_gpio_request(int gpio, int direction, int value, const char *label)
+{
+ int ret = 0;
+ unsigned long flags = 0;
+
+ if(!gpio_is_valid(gpio))
+ return 0;
+
+ if(direction == GPIOF_DIR_IN)
+ flags = GPIOF_IN;
+ else if(value == GPIO_LOW)
+ flags = GPIOF_OUT_INIT_LOW;
+ else
+ flags = GPIOF_OUT_INIT_HIGH;
+
+ ret = gpio_request_one(gpio, flags, label);
+ if(ret < 0)
+ pr_err("Failed to request '%s'\n", label);
+
+ return ret;
+}
+
+static struct spi_board_info board_spi_devices[] = {
+};
+
+/***********************************************************
+* touchscreen
+************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_GT8XX)
+static int goodix_init_platform_hw(void)
+{
+ int ret = 0;
+
+ ret = rk_gpio_request(TOUCH_PWR_PIN, GPIOF_DIR_OUT, TOUCH_PWR_VALUE, "touch_pwr");
+ if(ret < 0)
+ return ret;
+ msleep(100);
+
+ ret = rk_gpio_request(TOUCH_RST_PIN, GPIOF_DIR_OUT, TOUCH_RST_VALUE, "touch_rst");
+ if(ret < 0)
+ return ret;
+ msleep(100);
+
+ return 0;
+}
+
+struct goodix_platform_data goodix_info = {
+ .model = 8105,
+ .irq_pin = TOUCH_INT_PIN,
+ .rest_pin = TOUCH_RST_PIN,
+ .init_platform_hw = goodix_init_platform_hw,
+};
+#endif
+
+/***********************************************************
+* rk30 backlight
+************************************************************/
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+static int rk29_backlight_io_init(void)
+{
+ int ret = 0;
+
+ iomux_set(pwm_mode[BL_PWM]);
+#ifdef LCD_DISP_ON_PIN
+ ret = rk_gpio_request(BL_EN_PIN, GPIOF_DIR_OUT, BL_EN_VALUE, "bl_en");
+ if(ret < 0)
+ return ret;
+#endif
+ return 0;
+}
+
+static int rk29_backlight_io_deinit(void)
+{
+ int pwm_gpio;
+#ifdef LCD_DISP_ON_PIN
+ gpio_free(BL_EN_PIN);
+#endif
+ pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+ return rk_gpio_request(BL_EN_PIN, GPIOF_DIR_OUT, GPIO_LOW, "BL_PWM");
+}
+
+static int rk29_backlight_pwm_suspend(void)
+{
+ int ret, pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+
+ ret = rk_gpio_request(pwm_gpio, GPIOF_DIR_OUT, GPIO_LOW, "BL_PWM");
+ if(ret < 0)
+ return ret;
+#ifdef LCD_DISP_ON_PIN
+ gpio_direction_output(BL_EN_PIN, !BL_EN_VALUE);
+#endif
+ return ret;
+}
+
+static int rk29_backlight_pwm_resume(void)
+{
+ int pwm_gpio = iomux_mode_to_gpio(pwm_mode[BL_PWM]);
+
+ gpio_free(pwm_gpio);
+ iomux_set(pwm_mode[BL_PWM]);
+#ifdef LCD_DISP_ON_PIN
+ msleep(30);
+ gpio_direction_output(BL_EN_PIN, BL_EN_VALUE);
+#endif
+ return 0;
+}
+
+static struct rk29_bl_info rk29_bl_info = {
+ .pwm_id = BL_PWM,
+ .min_brightness=20,
+ .max_brightness=255,
+ .brightness_mode = BRIGHTNESS_MODE_CONIC,
+ .bl_ref = PWM_EFFECT_VALUE,
+ .io_init = rk29_backlight_io_init,
+ .io_deinit = rk29_backlight_io_deinit,
+ .pwm_suspend = rk29_backlight_pwm_suspend,
+ .pwm_resume = rk29_backlight_pwm_resume,
+};
+
+static struct platform_device rk29_device_backlight = {
+ .name = "rk29_backlight",
+ .id = -1,
+ .dev = {
+ .platform_data = &rk29_bl_info,
+ }
+};
+#endif
+
+/***********************************************************
+* fb
+************************************************************/
+#ifdef CONFIG_FB_ROCKCHIP
+static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
+{
+ int ret = 0;
+
+ ret = rk_gpio_request(LCD_CS_PIN, GPIOF_DIR_OUT, LCD_CS_VALUE, "lcd_cs");
+ if(ret < 0)
+ return ret;
+
+ return rk_gpio_request(LCD_EN_PIN, GPIOF_DIR_OUT, LCD_EN_VALUE, "lcd_en");
+}
+
+static int rk_fb_io_disable(void)
+{
+ gpio_set_value(LCD_CS_PIN, !LCD_CS_VALUE);
+ gpio_set_value(LCD_EN_PIN, !LCD_EN_VALUE);
+
+ return 0;
+}
+
+static int rk_fb_io_enable(void)
+{
+ gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
+ gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
+
+ return 0;
+}
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+struct rk29fb_info lcdc0_screen_info = {
+ #if defined(CONFIG_RK_HDMI)
+ .prop = EXTEND, //extend display device
+ .lcd_info = NULL,
+ .set_screen_info = hdmi_init_lcdc,
+ #endif
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+struct rk29fb_info lcdc1_screen_info = {
+ .prop = PRMRY, //primary display device
+ .io_init = rk_fb_io_init,
+ .io_disable = rk_fb_io_disable,
+ .io_enable = rk_fb_io_enable,
+ .set_screen_info = set_lcd_info,
+
+};
+#endif
+
+static struct resource resource_fb[] = {
+ [0] = {
+ .name = "fb0 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "ipp buf", //for rotate
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .name = "fb2 buf",
+ .start = 0,
+ .end = 0,//RK30_FB0_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device device_fb = {
+ .name = "rk-fb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(resource_fb),
+ .resource = resource_fb,
+};
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+static struct resource resource_lcdc0[] = {
+ [0] = {
+ .name = "lcdc0 reg",
+ .start = RK30_LCDC0_PHYS,
+ .end = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "lcdc0 irq",
+ .start = IRQ_LCDC0,
+ .end = IRQ_LCDC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc0 = {
+ .name = "rk30-lcdc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(resource_lcdc0),
+ .resource = resource_lcdc0,
+ .dev = {
+ .platform_data = &lcdc0_screen_info,
+ },
+};
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+static struct resource resource_lcdc1[] = {
+ [0] = {
+ .name = "lcdc1 reg",
+ .start = RK30_LCDC1_PHYS,
+ .end = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "lcdc1 irq",
+ .start = IRQ_LCDC1,
+ .end = IRQ_LCDC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device device_lcdc1 = {
+ .name = "rk30-lcdc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resource_lcdc1),
+ .resource = resource_lcdc1,
+ .dev = {
+ .platform_data = &lcdc1_screen_info,
+ },
+};
+#endif
+
+static int rk_platform_add_display_devices(void)
+{
+ struct platform_device *fb = NULL; //fb
+ struct platform_device *lcdc0 = NULL; //lcdc0
+ struct platform_device *lcdc1 = NULL; //lcdc1
+ struct platform_device *bl = NULL; //backlight
+#ifdef CONFIG_FB_ROCKCHIP
+ fb = &device_fb;
+#endif
+
+#if defined(CONFIG_LCDC0_RK3066B) || defined(CONFIG_LCDC0_RK3188)
+ lcdc0 = &device_lcdc0,
+#endif
+
+#if defined(CONFIG_LCDC1_RK3066B) || defined(CONFIG_LCDC1_RK3188)
+ lcdc1 = &device_lcdc1,
+#endif
+
+#ifdef CONFIG_BACKLIGHT_RK29_BL
+ bl = &rk29_device_backlight,
+#endif
+ __rk_platform_add_display_devices(fb,lcdc0,lcdc1,bl);
+
+ return 0;
+}
+
+
+/***********************************************************
+* gsensor
+************************************************************/
+#if defined (CONFIG_GS_MMA8452)
+static int mma8452_init_platform_hw(void)
+{
+ return 0;
+}
+
+static struct sensor_platform_data mma8452_info = {
+ .type = SENSOR_TYPE_ACCEL,
+ .irq_enable = 1,
+ .poll_delay_ms = 30,
+ .init_platform_hw = mma8452_init_platform_hw,
+ .orientation = {-1, 0, 0, 0, -1, 0, 0, 0, 1},
+};
+#endif
+
+/***********************************************************
+* keyboard
+************************************************************/
+#include <plat/key.h>
+
+static struct rk29_keys_button key_button[] = {
+#ifdef RK31XX_MAINBOARD_V1
+ {
+ .desc = "vol-",
+ .code = KEY_VOLUMEDOWN,
+ .adc_value = 744,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "play",
+ .code = KEY_POWER,
+ .gpio = PLAY_ON_PIN,
+ .active_low = PRESS_LEV_LOW,
+ .wakeup = 1,
+ },
+ {
+ .desc = "vol+",
+ .code = KEY_VOLUMEUP,
+ .adc_value = 558,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "menu",
+ .code = EV_MENU,
+ .adc_value = 1,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "home",
+ .code = KEY_HOME,
+ .adc_value = 354,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "esc",
+ .code = KEY_BACK,
+ .adc_value = 169,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+#else
+ {
+ .desc = "vol-",
+ .code = KEY_VOLUMEDOWN,
+ .adc_value = 900,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "play",
+ .code = KEY_POWER,
+ .gpio = PLAY_ON_PIN,
+ .active_low = PRESS_LEV_LOW,
+ .wakeup = 1,
+ },
+ {
+ .desc = "vol+",
+ .code = KEY_VOLUMEUP,
+ .adc_value = 1,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "menu",
+ .code = EV_MENU,
+ .adc_value = 133,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "home",
+ .code = KEY_HOME,
+ .adc_value = 550,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "esc",
+ .code = KEY_BACK,
+ .adc_value = 333,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+ {
+ .desc = "camera",
+ .code = KEY_CAMERA,
+ .adc_value = 742,
+ .gpio = INVALID_GPIO,
+ .active_low = PRESS_LEV_LOW,
+ },
+#endif
+};
+
+struct rk29_keys_platform_data rk29_keys_pdata = {
+ .buttons = key_button,
+ .nbuttons = ARRAY_SIZE(key_button),
+ .chn = 1, //chn: 0-7, if do not use ADC,set 'chn' -1
+};
+
+/***********************************************************
+* sdmmc
+************************************************************/
+#ifdef CONFIG_SDMMC_RK29
+#include "board-rk3028a-tb-sdmmc-config.c"
+#include "../plat-rk/rk-sdmmc-ops.c"
+#include "../plat-rk/rk-sdmmc-wifi.c"
+#endif //endif ---#ifdef CONFIG_SDMMC_RK29
+
+#ifdef CONFIG_SDMMC0_RK29
+#define CONFIG_SDMMC0_USE_DMA
+static int rk29_sdmmc0_cfg_gpio(void)
+{
+ rk29_sdmmc_set_iomux(0, 0xFFFF);
+ #if defined(CONFIG_SDMMC0_RK29_SDCARD_DET_FROM_GPIO)
+ iomux_set_gpio_mode(iomux_gpio_to_mode(RK29SDK_SD_CARD_DETECT_N));
+ #else
+ iomux_set(MMC0_DETN);
+ #endif
+
+ #if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
+ gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
+ #endif
+ return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+ .io_init = rk29_sdmmc0_cfg_gpio,
+
+ .set_iomux = rk29_sdmmc_set_iomux,
+
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC) && defined(CONFIG_USE_SDMMC0_FOR_WIFI_DEVELOP_BOARD)
+ .status = rk29sdk_wifi_mmc0_status,
+ .register_status_notify = rk29sdk_wifi_mmc0_status_register,
+#endif
+
+#if defined(RK29SDK_SD_CARD_PWR_EN) || (INVALID_GPIO != RK29SDK_SD_CARD_PWR_EN)
+ .power_en = RK29SDK_SD_CARD_PWR_EN,
+ .power_en_level = RK29SDK_SD_CARD_PWR_EN_LEVEL,
+#else
+ .power_en = INVALID_GPIO,
+ .power_en_level = GPIO_LOW,
+#endif
+ .enable_sd_wakeup = 0,
+
+#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC0_WRITE_PROTECT_PIN,
+ .write_prt_enalbe_level = SDMMC0_WRITE_PROTECT_ENABLE_VALUE;
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+
+ .det_pin_info = {
+ #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N, //INVALID_GPIO,
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+ #endif
+ },
+
+};
+#endif // CONFIG_SDMMC0_RK29
+
+#ifdef CONFIG_SDMMC1_RK29
+#define CONFIG_SDMMC1_USE_DMA
+static int rk29_sdmmc1_cfg_gpio(void)
+{
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
+ gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
+#endif
+ return 0;
+}
+
+struct rk29_sdmmc_platform_data default_sdmmc1_data = {
+ .host_ocr_avail =
+ (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
+ MMC_VDD_33_34),
+
+#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#else
+ .host_caps =
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+#endif
+
+ .io_init = rk29_sdmmc1_cfg_gpio,
+
+ .set_iomux = rk29_sdmmc_set_iomux,
+
+ .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+
+#if defined(CONFIG_WIFI_CONTROL_FUNC) || defined(CONFIG_WIFI_COMBO_MODULE_CONTROL_FUNC)
+ .status = rk29sdk_wifi_status,
+ .register_status_notify = rk29sdk_wifi_status_register,
+#endif
+
+#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
+ .write_prt = SDMMC1_WRITE_PROTECT_PIN,
+ .write_prt_enalbe_level = SDMMC1_WRITE_PROTECT_ENABLE_VALUE;
+#else
+ .write_prt = INVALID_GPIO,
+#endif
+
+ #if defined(CONFIG_RK29_SDIO_IRQ_FROM_GPIO)
+ .sdio_INT_gpio = RK29SDK_WIFI_SDIO_CARD_INT,
+ #endif
+
+ .det_pin_info = {
+ #if defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
+ #if defined(RK29SDK_SD_CARD_DETECT_N) || (INVALID_GPIO != RK29SDK_SD_CARD_DETECT_N)
+ .io = RK29SDK_SD_CARD_DETECT_N,
+ #else
+ .io = INVALID_GPIO,
+ #endif
+
+ .enable = RK29SDK_SD_CARD_INSERT_LEVEL,
+ #else
+ .io = INVALID_GPIO,
+ .enable = GPIO_LOW,
+ #endif
+ },
+ .enable_sd_wakeup = 0,
+};
+#endif //endif--#ifdef CONFIG_SDMMC1_RK29
+
+/***********************************************************
+* rfkill
+************************************************************/
+#ifdef CONFIG_RFKILL_RK
+// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
+static struct rfkill_rk_platform_data rfkill_rk_platdata = {
+ .type = RFKILL_TYPE_BLUETOOTH,
+
+ .poweron_gpio = { // BT_REG_ON
+ .io = INVALID_GPIO, //RK2928_PIN3_PC7,
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "bt_poweron",
+ //.fgpio = GPIO3_C7,
+ },
+ },
+
+ .reset_gpio = { // BT_RST
+ .io = RK2928_PIN1_PB3, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = "bt_reset",
+ .fgpio = GPIO1_B3,
+ },
+ },
+
+ .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
+ .io = RK2928_PIN1_PB2, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_HIGH,
+ .iomux = {
+ .name = "bt_wake",
+ .fgpio = GPIO1_B2,
+ },
+ },
+
+ .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
+ .gpio = {
+ .io = RK2928_PIN0_PA4, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
+ .iomux = {
+ .name = "bt_wake_host",
+ //.fgpio = GPIO0_A4,
+ },
+ },
+ },
+
+ .rts_gpio = { // UART_RTS, enable or disable BT's data coming
+ .io = RK2928_PIN1_PA3, // set io to INVALID_GPIO for disable it
+ .enable = GPIO_LOW,
+ .iomux = {
+ .name = "bt_rts",
+ .fgpio = GPIO1_A3,
+ .fmux = UART0_RTSN,
+ },
+ }
+};
+
+static struct platform_device device_rfkill_rk = {
+ .name = "rfkill_rk",
+ .id = -1,
+ .dev = {
+ .platform_data = &rfkill_rk_platdata,
+ },
+};
+#endif
+
+/***********************************************************
+* ion
+************************************************************/
+#ifdef CONFIG_ION
+static struct ion_platform_data rk30_ion_pdata = {
+ .nr = 1,
+ .heaps = {
+ {
+ .type = ION_HEAP_TYPE_CARVEOUT,
+ .id = ION_NOR_HEAP_ID,
+ .name = "norheap",
+ .size = ION_RESERVE_SIZE,
+ }
+ },
+};
+
+static struct platform_device device_ion = {
+ .name = "ion-rockchip",
+ .id = 0,
+ .dev = {
+ .platform_data = &rk30_ion_pdata,
+ },
+};
+#endif
+
+/***********************************************************
+* pwm regulator
+************************************************************/
+#ifdef CONFIG_RK30_PWM_REGULATOR
+static int pwm_voltage_map[] = {
+ 800000, 825000, 850000, 875000, 900000, 925000 ,
+ 950000, 975000, 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000, 1200000, 1225000,
+ 1250000, 1275000, 1300000, 1325000, 1350000, 1375000
+};
+
+static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
+ {
+ .supply = "vdd_core",
+ }
+};
+
+struct regulator_init_data pwm_regulator_init_dcdc[1] = {
+ {
+ .constraints = {
+ .name = "PWM_DCDC1",
+ .min_uV = 600000,
+ .max_uV = 1800000, //0.6-1.8V
+ .apply_uV = true,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
+ .consumer_supplies = pwm_dcdc1_consumers,
+ },
+};
+
+static struct pwm_platform_data pwm_regulator_info[1] = {
+ {
+ .pwm_id = REG_PWM,
+ .pwm_voltage = 1200000,
+ .suspend_voltage = 1050000,
+ .min_uV = 950000,
+ .max_uV = 1400000,
+ .coefficient = 504, //50.4%
+ .pwm_voltage_map = pwm_voltage_map,
+ .init_data = &pwm_regulator_init_dcdc[0],
+ },
+};
+struct platform_device pwm_regulator_device[1] = {
+ {
+ .name = "pwm-voltage-regulator",
+ .id = 0,
+ .dev = {
+ .platform_data = &pwm_regulator_info[0],
+ }
+ },
+};
+
+static void pwm_regulator_init(void)
+{
+ pwm_regulator_info[0].pwm_gpio = iomux_mode_to_gpio(pwm_mode[REG_PWM]);
+ pwm_regulator_info[0].pwm_iomux_pwm = pwm_mode[REG_PWM];
+ pwm_regulator_info[0].pwm_iomux_gpio = iomux_switch_gpio_mode(pwm_mode[REG_PWM]);
+}
+#endif
+
+int __sramdata pwm_iomux, pwm_do, pwm_dir, pwm_en;
+#define grf_readl(offset) readl_relaxed(RK30_GRF_BASE + offset)
+#define grf_writel(v, offset) do { writel_relaxed(v, RK30_GRF_BASE + offset); dsb(); } while (0)
+
+#define GPIO0_D2_OFFSET 10
+void __sramfunc rk30_pwm_logic_suspend_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ #if 0
+ /* pwm0: GPIO0_D2, pwm1: GPIO0_D3, pwm2: GPIO0_D4 */
+ int off = GPIO0_D2_OFFSET + REG_PWM;
+
+ sram_udelay(10000);
+ pwm_iomux = grf_readl(GRF_GPIO0D_IOMUX);
+ pwm_dir = grf_readl(GRF_GPIO0H_DIR);
+ pwm_do = grf_readl(GRF_GPIO0H_DO);
+ pwm__en = grf_readl(GRF_GPIO0H_EN);
+
+ grf_writel((1<<(2 * off), GRF_GPIO0D_IOMUX);
+ grf_writel((1<<(16 + off))|(1<<off), GRF_GPIO0H_DIR);
+ grf_writel((1<<(16 + off))|(1<<off), GRF_GPIO0H_DO);
+ #endif
+#endif
+}
+
+void __sramfunc rk30_pwm_logic_resume_voltage(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ #if 0
+ /* pwm0: GPIO0_D2, pwm1: GPIO0_D3, pwm2: GPIO0_D4 */
+ int off = GPIO0_D2_OFFSET + REG_PWM;
+
+ grf_writel((1<<(2 * off))|pwm_iomux, GRF_GPIO0D_IOMUX);
+ grf_writel(((1<<(16 + off))|pwm_dir), GRF_GPIO0L_DIR);
+ grf_writel(((1<<(16 + off))|pwm_do), GRF_GPIO0L_DO);
+ grf_writel(((1<<(16 + off))|pwm_en), GRF_GPIO0L_EN);
+ sram_udelay(10000);
+ #endif
+#endif
+}
+extern void pwm_suspend_voltage(void);
+extern void pwm_resume_voltage(void);
+
+void rk30_pwm_suspend_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_suspend_voltage();
+#endif
+}
+
+void rk30_pwm_resume_voltage_set(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_resume_voltage();
+#endif
+}
+
+/***********************************************************
+* pmic
+************************************************************/
+int __sramdata g_pmic_type = 0;
+
+#ifdef CONFIG_MFD_TPS65910
+#define TPS65910_HOST_IRQ PMU_INT_PIN
+#define PMU_POWER_SLEEP PMU_SLEEP_PIN
+static struct pmu_info tps65910_dcdc_info[] = {
+ {
+ .name = "vdd_cpu",
+ .min_uv = 1200000,
+ .max_uv = 1200000,
+ },
+ {
+ .name = "vdd2",
+ .min_uv = 1200000,
+ .max_uv = 1200000,
+ },
+ {
+ .name = "vio",
+ .min_uv = 3300000,
+ .max_uv = 3300000,
+ },
+};
+
+static struct pmu_info tps65910_ldo_info[] = {
+ {
+ .name = "vpll",
+ .min_uv = 2500000,
+ .max_uv = 2500000,
+ },
+ {
+ .name = "vdig1",
+ .min_uv = 1800000,
+ .max_uv = 1800000,
+ },
+ {
+ .name = "vdac",
+ .min_uv = 1800000,
+ .max_uv = 1800000,
+ },
+};
+#include "../mach-rk30/board-pmu-tps65910.c"
+#endif
+
+void __sramfunc board_pmu_suspend(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_suspend();
+ #endif
+}
+
+void __sramfunc board_pmu_resume(void)
+{
+ #if defined (CONFIG_MFD_TPS65910)
+ if(pmic_is_tps65910())
+ board_pmu_tps65910_resume();
+ #endif
+}
+
+/***********************************************************
+* i2c
+************************************************************/
+#ifdef CONFIG_I2C0_RK30
+static struct i2c_board_info __initdata i2c0_info[] = {
+#if defined (CONFIG_GS_MMA8452)
+ {
+ .type = "gs_mma8452",
+ .addr = 0x1d,
+ .flags = 0,
+ .irq = GS_INT_PIN,
+ .platform_data = &mma8452_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C1_RK30
+static struct i2c_board_info __initdata i2c1_info[] = {
+#if defined (CONFIG_MFD_TPS65910)
+ {
+ .type = "tps65910",
+ .addr = TPS65910_I2C_ID0,
+ .flags = 0,
+ .irq = TPS65910_HOST_IRQ,
+ .platform_data = &tps65910_data,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C2_RK30
+static struct i2c_board_info __initdata i2c2_info[] = {
+#if defined (CONFIG_TOUCHSCREEN_GT8XX)
+ {
+ .type = "Goodix-TS",
+ .addr = 0x55,
+ .flags = 0,
+ .irq = TOUCH_INT_PIN,
+ .platform_data = &goodix_info,
+ },
+#endif
+};
+#endif
+
+#ifdef CONFIG_I2C3_RK30
+static struct i2c_board_info __initdata i2c3_info[] = {
+};
+#endif
+
+#ifdef CONFIG_I2C_GPIO_RK30
+#define I2C_SDA_PIN INVALID_GPIO// RK2928_PIN2_PD6 //set sda_pin here
+#define I2C_SCL_PIN INVALID_GPIO//RK2928_PIN2_PD7 //set scl_pin here
+static int rk30_i2c_io_init(void)
+{
+ return 0;
+}
+
+struct i2c_gpio_platform_data default_i2c_gpio_data = {
+ .sda_pin = I2C_SDA_PIN,
+ .scl_pin = I2C_SCL_PIN,
+ .udelay = 5, // clk = 500/udelay = 100Khz
+ .timeout = 100,//msecs_to_jiffies(100),
+ .bus_num = 5,
+ .io_init = rk30_i2c_io_init,
+};
+
+static struct i2c_board_info __initdata i2c_gpio_info[] = {
+};
+#endif
+
+static void __init rk30_i2c_register_board_info(void)
+{
+#ifdef CONFIG_I2C0_RK30
+ i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
+#endif
+#ifdef CONFIG_I2C1_RK30
+ i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
+#endif
+#ifdef CONFIG_I2C2_RK30
+ i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
+#endif
+#ifdef CONFIG_I2C3_RK30
+ i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
+#endif
+#ifdef CONFIG_I2C_GPIO_RK30
+ i2c_register_board_info(4, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
+#endif
+}
+
+/***********************************************************
+* board init
+************************************************************/
+static struct platform_device *devices[] __initdata = {
+#ifdef CONFIG_ION
+ &device_ion,
+#endif
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+ &rk29sdk_wifi_device,
+#endif
+#ifdef CONFIG_RFKILL_RK
+ &device_rfkill_rk,
+#endif
+};
+
+static void rk30_pm_power_off(void)
+{
+#if defined(CONFIG_MFD_TPS65910)
+ tps65910_device_shutdown();//tps65910 shutdown
+#endif
+ gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
+ while(1);
+}
+
+static void __init machine_rk30_board_init(void)
+{
+#ifdef CONFIG_RK30_PWM_REGULATOR
+ pwm_regulator_init();
+#endif
+ avs_init();
+ pm_power_off = rk30_pm_power_off;
+ rk_gpio_request(POWER_ON_PIN, GPIOF_DIR_OUT, GPIO_HIGH, "system power on");
+ rk30_i2c_register_board_info();
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ rk_platform_add_display_devices();
+}
+
+static void __init rk30_reserve(void)
+{
+ //fb reserve
+#ifdef CONFIG_FB_ROCKCHIP
+ resource_fb[0].start = board_mem_reserve_add("fb0 buf", get_fb_size());
+ resource_fb[0].end = resource_fb[0].start + get_fb_size()- 1;
+ #if 0
+ resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
+ resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
+ #endif
+
+ #if defined(CONFIG_FB_ROTATE) || !defined(CONFIG_THREE_FB_BUFFER)
+ resource_fb[2].start = board_mem_reserve_add("fb2 buf",get_fb_size());
+ resource_fb[2].end = resource_fb[2].start + get_fb_size() - 1;
+ #endif
+#endif
+ //ion reserve
+#ifdef CONFIG_ION
+ rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
+#endif
+ board_mem_reserved();
+}
+
+/***********************************************************
+* clock
+************************************************************/
+static struct cpufreq_frequency_table dvfs_arm_table[] = {
+ {.frequency = 312 * 1000, .index = 1200 * 1000},
+ {.frequency = 504 * 1000, .index = 1200 * 1000},
+ {.frequency = 816 * 1000, .index = 1200 * 1000},
+ {.frequency = 1008 * 1000, .index = 1200 * 1000},
+ {.frequency = 1200 * 1000, .index = 1200 * 1000},
+ {.frequency = 1416 * 1000, .index = 1200 * 1000},
+ {.frequency = 1608 * 1000, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_gpu_table[] = {
+ {.frequency = 100 * 1000, .index = 1200 * 1000},
+ {.frequency = 200 * 1000, .index = 1200 * 1000},
+ {.frequency = 266 * 1000, .index = 1200 * 1000},
+ {.frequency = 300 * 1000, .index = 1200 * 1000},
+ {.frequency = 400 * 1000, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table dvfs_ddr_table[] = {
+ {.frequency = 200 * 1000 + DDR_FREQ_SUSPEND, .index = 1200 * 1000},
+ {.frequency = 300 * 1000 + DDR_FREQ_VIDEO, .index = 1200 * 1000},
+ {.frequency = 400 * 1000 + DDR_FREQ_NORMAL, .index = 1200 * 1000},
+ {.frequency = CPUFREQ_TABLE_END},
+};
+
+void __init board_clock_init(void)
+{
+ rk2928_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
+ //dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "cpu"), dvfs_arm_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
+ dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
+}
+
+/************************ end *****************************/
+MACHINE_START(RK30, "RK30board")
+ .boot_params = PLAT_PHYS_OFFSET + 0x800,
+ .fixup = rk2928_fixup,
+ .reserve = &rk30_reserve,
+ .map_io = rk2928_map_io,
+ .init_irq = rk2928_init_irq,
+ .timer = &rk2928_timer,
+ .init_machine = machine_rk30_board_init,
+MACHINE_END
#ifndef __MACH_PMU_H
#define __MACH_PMU_H
+#include <linux/io.h>
#include <mach/cru.h>
enum pmu_power_domain {
config EMMC_RK
tristate "RK emmc controller suppport"
- depends on ARCH_RK3188 || ARCH_RK3066B
+ depends on ARCH_RK3188 || ARCH_RK3066B || ARCH_RK3026
help
This selects the RK EMMC controller
projects / firefly-linux-kernel-4.4.55.git / commitdiff