Staging: comedi: fix over 80 character coding style issue in ni_labpc.c
authorMaurice Dawson <mauricedawson2699@gmail.com>
Sat, 26 Jun 2010 16:02:25 +0000 (17:02 +0100)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 8 Jul 2010 20:15:15 +0000 (13:15 -0700)
This is a patch to the ni_labpc.c file that fixes up 80 character warnings found by the checkpatch.pl tool

Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/comedi/drivers/ni_labpc.c

index 170bab60555a3b240e893e44fe78df7e65b557ed..3acf7e62bec47c56a1d40fc2ecffd409f6f3d27a 100644 (file)
@@ -1098,7 +1098,10 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
                        err++;
                }
                break;
-               /*  TRIG_EXT doesn't care since it doesn't trigger off a numbered channel */
+               /*
+                * TRIG_EXT doesn't care since it doesn't
+                * trigger off a numbered channel
+                */
        default:
                break;
        }
@@ -1156,25 +1159,35 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        /*  setup hardware conversion counter */
        if (cmd->stop_src == TRIG_EXT) {
-               /*  load counter a1 with count of 3 (pc+ manual says this is minimum allowed) using mode 0 */
+               /*
+                * load counter a1 with count of 3
+                * (pc+ manual says this is minimum allowed) using mode 0
+                */
                ret = labpc_counter_load(dev, dev->iobase + COUNTER_A_BASE_REG,
                                         1, 3, 0);
                if (ret < 0) {
                        comedi_error(dev, "error loading counter a1");
                        return -1;
                }
-       } else                  /*  otherwise, just put a1 in mode 0 with no count to set its output low */
+       } else                  /*
+                                * otherwise, just put a1 in mode 0
+                                * with no count to set its output low
+                                */
                devpriv->write_byte(INIT_A1_BITS,
                                    dev->iobase + COUNTER_A_CONTROL_REG);
 
        /*  figure out what method we will use to transfer data */
        if (devpriv->dma_chan &&        /*  need a dma channel allocated */
-           /*  dma unsafe at RT priority, and too much setup time for TRIG_WAKE_EOS for */
+               /*
+                * dma unsafe at RT priority,
+                * and too much setup time for TRIG_WAKE_EOS for
+                */
            (cmd->flags & (TRIG_WAKE_EOS | TRIG_RT)) == 0 &&
            /*  only available on the isa boards */
            thisboard->bustype == isa_bustype) {
                xfer = isa_dma_transfer;
-       } else if (thisboard->register_layout == labpc_1200_layout &&   /*  pc-plus has no fifo-half full interrupt */
+               /* pc-plus has no fifo-half full interrupt */
+       } else if (thisboard->register_layout == labpc_1200_layout &&
                   /*  wake-end-of-scan should interrupt on fifo not empty */
                   (cmd->flags & TRIG_WAKE_EOS) == 0 &&
                   /*  make sure we are taking more than just a few points */
@@ -1621,7 +1634,10 @@ static int labpc_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
                devpriv->command4_bits |= ADC_DIFF_BIT;
        devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
-       /* initialize pacer counter output to make sure it doesn't cause any problems */
+       /*
+        * initialize pacer counter output to make sure it doesn't
+        * cause any problems
+        */
        devpriv->write_byte(INIT_A0_BITS, dev->iobase + COUNTER_A_CONTROL_REG);
 
        labpc_clear_adc_fifo(dev);
@@ -1846,7 +1862,10 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
                unsigned int scan_period;
 
                scan_period = labpc_ai_scan_period(cmd);
-               /* calculate cascaded counter values that give desired scan timing */
+               /*
+                * calculate cascaded counter values
+                * that give desired scan timing
+                */
                i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
                                               &(devpriv->divisor_b1),
                                               &(devpriv->divisor_b0),
@@ -1857,7 +1876,10 @@ static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)
                unsigned int convert_period;
 
                convert_period = labpc_ai_convert_period(cmd);
-               /* calculate cascaded counter values that give desired conversion timing */
+               /*
+                * calculate cascaded counter values
+                * that give desired conversion timing
+                */
                i8253_cascade_ns_to_timer_2div(LABPC_TIMER_BASE,
                                               &(devpriv->divisor_a0),
                                               &(devpriv->divisor_b0),