ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support
authorBen Dooks <ben@simtec.co.uk>
Thu, 30 Jul 2009 22:23:37 +0000 (23:23 +0100)
committerBen Dooks <ben-linux@fluff.org>
Thu, 30 Jul 2009 22:22:55 +0000 (23:22 +0100)
Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
arch/arm/mach-s3c2412/Kconfig
arch/arm/mach-s3c2412/cpu-freq.c
arch/arm/plat-s3c24xx/Kconfig
arch/arm/plat-s3c24xx/Makefile
arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
arch/arm/plat-s3c24xx/s3c2412-iotiming.c [new file with mode: 0644]

index 79e18340e07404340ea2b476ea6739cef2187c3a..35c1bde89cf263f315eb8e013f34df10444558c1 100644 (file)
@@ -32,9 +32,12 @@ config S3C2412_PM
        help
          Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
 config S3C2412_CPUFREQ
        bool
        depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+       select S3C2412_IOTIMING
        default y
        help
          CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
index 80b20c33447266384ccaea4aba08090aee646389..21a66178d9b71a98c96fcc64a7a0df7861408725 100644 (file)
@@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
        .set_divs       = s3c2412_cpufreq_setdivs,
        .calc_divs      = s3c2412_cpufreq_calcdivs,
 
+       .calc_iotiming  = s3c2412_iotiming_calc,
+       .set_iotiming   = s3c2412_iotiming_set,
+       .get_iotiming   = s3c2412_iotiming_get,
+
        .resume_clocks  = s3c2412_setup_clocks,
 };
 
index ec9921b6848b746fb184b1cb0e39c710e75b48d3..f0b9c73fe0080200e07b3405867901702ccfde40 100644 (file)
@@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS
          Internal node to select timing code that is common to the s3c2410
          and s3c2440/s3c244 cpu frequency support.
 
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+       bool
+       depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+       help
+         Intel node to select io timing code that is common to the s3c2412
+         and the s3c2443.
+
 config MACH_SMDK
        bool
        help
index c60317b3491bf7eb709f28aa34350a72e5e790e0..8759c070fd9ae928e507fb9e5ff7e6e63270227a 100644 (file)
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK)   += s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)      += dma.o
 obj-$(CONFIG_S3C24XX_ADC)      += adc.o
 obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
index 7938fb0bc3874f1ea2a5885b84c24da0aa815050..f02b3c06c1e0690b9c90600781a9a6bda776fc96 100644 (file)
@@ -42,8 +42,44 @@ struct s3c2410_iobank_timing {
        unsigned char   nwait_en;       /* nWait enabled for bank. */
 };
 
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+       unsigned int    idcy;
+       unsigned int    wstrd;
+       unsigned int    wstwr;
+       unsigned int    wstoen;
+       unsigned int    wstwen;
+       unsigned int    wstbrd;
+
+       /* register cache */
+       unsigned char   smbidcyr;
+       unsigned char   smbwstrd;
+       unsigned char   smbwstwr;
+       unsigned char   smbwstoen;
+       unsigned char   smbwstwen;
+       unsigned char   smbwstbrd;
+};
+
 union s3c_iobank {
-         struct s3c2410_iobank_timing  *io_2410;
+       struct s3c2410_iobank_timing    *io_2410;
+       struct s3c2412_iobank_timing    *io_2412;
 };
 
 /**
@@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                               struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                               struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                                struct s3c_iotimings *iot);
+
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644 (file)
index 0000000..a3648cb
--- /dev/null
@@ -0,0 +1,261 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *     http://armlinux.simtec.co.uk/
+ *     Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+       struct s3c2412_iobank_timing *bt;
+       unsigned int bank;
+
+       for (bank = 0; bank < MAX_BANKS; bank++) {
+               bt = iot->bank[bank].io_2412;
+               if (!bt)
+                       continue;
+
+               printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+                      "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+                      print_ns(bt->idcy),
+                      print_ns(bt->wstrd),
+                      print_ns(bt->wstwr),
+                      print_ns(bt->wstoen),
+                      print_ns(bt->wstwen),
+                      print_ns(bt->wstbrd));
+       }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+       return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+                               unsigned int *err)
+{
+       unsigned int ret = to_div(hwtm, clk_tns);
+
+       if (ret > 0xf)
+               *err = -EINVAL;
+
+       return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+                            struct s3c2412_iobank_timing *bt)
+{
+       unsigned int hclk = cfg->freq.hclk_tns;
+       int err = 0;
+
+       bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+       bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+       bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+       bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+       bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+       bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+       return err;
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *iot)
+{
+       struct s3c2412_iobank_timing *bt;
+       int bank;
+       int ret;
+
+       for (bank = 0; bank < MAX_BANKS; bank++) {
+               bt = iot->bank[bank].io_2412;
+               if (!bt)
+                       continue;
+
+               ret = s3c2412_calc_bank(cfg, bt);
+               if (ret) {
+                       printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+                              __func__, bank);
+                       goto err;
+               }
+       }
+
+       return 0;
+ err:
+       return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+                         struct s3c_iotimings *iot)
+{
+       struct s3c2412_iobank_timing *bt;
+       void __iomem *regs;
+       int bank;
+
+       /* set the io timings from the specifier */
+
+       for (bank = 0; bank < MAX_BANKS; bank++) {
+               bt = iot->bank[bank].io_2412;
+               if (!bt)
+                       continue;
+
+               regs = S3C2412_SSMC_BANK(bank);
+
+               __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+               __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+               __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+               __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+               __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+               __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+       }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+       return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+                                    struct s3c2412_iobank_timing *bt,
+                                    unsigned int bank)
+{
+       unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+       void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+       bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+       bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+       bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+       bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+       bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+       if (bank < 2)
+               return true;
+
+       return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+                        struct s3c_iotimings *timings)
+{
+       struct s3c2412_iobank_timing *bt;
+       u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+       unsigned int bank;
+
+       /* look through all banks to see what is currently set. */
+
+       for (bank = 0; bank < MAX_BANKS; bank++) {
+               if (!bank_is_io(bank, bankcfg))
+                       continue;
+
+               bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+               if (!bt) {
+                       printk(KERN_ERR "%s: no memory for bank\n", __func__);
+                       return -ENOMEM;
+               }
+
+               timings->bank[bank].io_2412 = bt;
+               s3c2412_iotiming_getbank(cfg, bt, bank);
+       }
+
+       s3c2412_print_timing("get", timings);
+       return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+       struct s3c_cpufreq_board *board = cfg->board;
+       u32 refresh;
+
+       WARN_ON(board == NULL);
+
+       /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+        * down to ensure that we do not overflow 32 bit numbers.
+        *
+        * This should work for HCLK up to 133MHz and refresh period up
+        * to 30usec.
+        */
+
+       refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+       refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+       refresh &= ((1 << 16) - 1);
+
+       s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+       __raw_writel(refresh, S3C2412_REFRESH);
+}