obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+ifeq ($(CONFIG_PM),y)
+obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/sleep.S
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/io.h>
-#include <mach/pm.h>
-
-#include "sdrc.h"
-
-/* First address of reserved address space? apparently valid for OMAP2 & 3 */
-#define A_SDRC0_V (0xC0000000)
-
- .text
-
-/*
- * Forces OMAP into idle state
- *
- * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
- * for normal idles.
- *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- * wakes up it continues execution at the point it went to sleep.
- */
-ENTRY(omap24xx_idle_loop_suspend)
- stmfd sp!, {r0, lr} @ save registers on stack
- mov r0, #0 @ clear for mcr setup
- mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
- ldmfd sp!, {r0, pc} @ restore regs and return
-
-ENTRY(omap24xx_idle_loop_suspend_sz)
- .word . - omap24xx_idle_loop_suspend
-
-/*
- * omap242x_cpu_suspend() - Forces OMAP into deep sleep state by completing
- * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
- * SDRC.
- *
- * Input:
- * R0 : DLL ctrl value pre-Sleep
- * R1 : Processor+Revision
- * 2420: 0x21 = 242xES1, 0x26 = 242xES2.2
- * 2430: 0x31 = 2430ES1, 0x32 = 2430ES2
- *
- * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
- * when we get called, but the DLL probably isn't. We will wait a bit more in
- * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
- * if in unlocked mode.
- *
- * For less than 242x-ES2.2 upon wake from a sleep mode where the external
- * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
- * clock can pass into the PRCM can cause problems at DSP and IVA.
- * To work around this the code will switch to the 32kHz source prior to sleep.
- * Post sleep we will shift back to using the DPLL. Apparently,
- * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
- * 3x12MHz + 3x32kHz clocks for a full switch.
- *
- * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
- * at wake
- */
-ENTRY(omap24xx_cpu_suspend)
- stmfd sp!, {r0 - r12, lr} @ save registers on stack
- mov r3, #0x0 @ clear for mrc call
- mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
- nop
- nop
- ldr r3, A_SDRC_POWER @ addr of sdrc power
- ldr r4, [r3] @ value of sdrc power
- orr r4, r4, #0x40 @ enable self refresh on idle req
- mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
- str r4, [r3] @ make it so
- mov r2, #0
- nop
- mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
- nop
-loop:
- subs r5, r5, #0x1 @ awake, wait just a bit
- bne loop
-
- /* The DPLL has on before we take the DDR out of self refresh */
- bic r4, r4, #0x40 @ now clear self refresh bit.
- str r4, [r3] @ put vlaue back.
- ldr r4, A_SDRC0 @ make a clock happen
- ldr r4, [r4]
- nop @ start auto refresh only after clk ok
- movs r0, r0 @ see if DDR or SDR
- ldrne r1, A_SDRC_DLLA_CTRL_S @ get addr of DLL ctrl
- strne r0, [r1] @ rewrite DLLA to force DLL reload
- addne r1, r1, #0x8 @ move to DLLB
- strne r0, [r1] @ rewrite DLLB to force DLL reload
-
- mov r5, #0x1000
-loop2:
- subs r5, r5, #0x1
- bne loop2
- /* resume*/
- ldmfd sp!, {r0 - r12, pc} @ restore regs and return
-
-A_SDRC_POWER:
- .word OMAP242X_SDRC_REGADDR(SDRC_POWER)
-A_SDRC0:
- .word A_SDRC0_V
-A_SDRC_DLLA_CTRL_S:
- .word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
-
-ENTRY(omap24xx_cpu_suspend_sz)
- .word . - omap24xx_cpu_suspend
-
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * (C) Copyright 2006 Nokia Corporation
+ * Fixed idle loop sleep
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/pm.h>
+
+#include <mach/omap24xx.h>
+
+#include "sdrc.h"
+
+/* First address of reserved address space? apparently valid for OMAP2 & 3 */
+#define A_SDRC0_V (0xC0000000)
+
+ .text
+
+/*
+ * Forces OMAP into idle state
+ *
+ * omap24xx_idle_loop_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap24xx_idle_loop_suspend)
+ stmfd sp!, {r0, lr} @ save registers on stack
+ mov r0, #0 @ clear for mcr setup
+ mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
+ ldmfd sp!, {r0, pc} @ restore regs and return
+
+ENTRY(omap24xx_idle_loop_suspend_sz)
+ .word . - omap24xx_idle_loop_suspend
+
+/*
+ * omap24xx_cpu_suspend() - Forces OMAP into deep sleep state by completing
+ * SDRC shutdown then ARM shutdown. Upon wake MPU is back on so just restore
+ * SDRC.
+ *
+ * Input:
+ * R0 : DLL ctrl value pre-Sleep
+ * R1 : SDRC_DLLA_CTRL
+ * R2 : SDRC_POWER
+ *
+ * The if the DPLL is going to AutoIdle. It seems like the DPLL may be back on
+ * when we get called, but the DLL probably isn't. We will wait a bit more in
+ * case the DPLL isn't quite there yet. The code will wait on DLL for DDR even
+ * if in unlocked mode.
+ *
+ * For less than 242x-ES2.2 upon wake from a sleep mode where the external
+ * oscillator was stopped, a timing bug exists where a non-stabilized 12MHz
+ * clock can pass into the PRCM can cause problems at DSP and IVA.
+ * To work around this the code will switch to the 32kHz source prior to sleep.
+ * Post sleep we will shift back to using the DPLL. Apparently,
+ * CM_IDLEST_CLKGEN does not reflect the full clock change so you need to wait
+ * 3x12MHz + 3x32kHz clocks for a full switch.
+ *
+ * The DLL load value is not kept in RETENTION or OFF. It needs to be restored
+ * at wake
+ */
+ENTRY(omap24xx_cpu_suspend)
+ stmfd sp!, {r0 - r12, lr} @ save registers on stack
+ mov r3, #0x0 @ clear for mcr call
+ mcr p15, 0, r3, c7, c10, 4 @ memory barrier, hope SDR/DDR finished
+ nop
+ nop
+ ldr r4, [r2] @ read SDRC_POWER
+ orr r4, r4, #0x40 @ enable self refresh on idle req
+ mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
+ str r4, [r2] @ make it so
+ mov r2, #0
+ nop
+ mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+ nop
+loop:
+ subs r5, r5, #0x1 @ awake, wait just a bit
+ bne loop
+
+ /* The DPLL has to be on before we take the DDR out of self refresh */
+ bic r4, r4, #0x40 @ now clear self refresh bit.
+ str r4, [r2] @ write to SDRC_POWER
+ ldr r4, A_SDRC0 @ make a clock happen
+ ldr r4, [r4] @ read A_SDRC0
+ nop @ start auto refresh only after clk ok
+ movs r0, r0 @ see if DDR or SDR
+ strne r0, [r1] @ rewrite DLLA to force DLL reload
+ addne r1, r1, #0x8 @ move to DLLB
+ strne r0, [r1] @ rewrite DLLB to force DLL reload
+
+ mov r5, #0x1000
+loop2:
+ subs r5, r5, #0x1
+ bne loop2
+ /* resume*/
+ ldmfd sp!, {r0 - r12, pc} @ restore regs and return
+
+A_SDRC0:
+ .word A_SDRC0_V
+
+ENTRY(omap24xx_cpu_suspend_sz)
+ .word . - omap24xx_cpu_suspend
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
projects / firefly-linux-kernel-4.4.55.git / commitdiff