ARM: dts: sync tinker board dts

Sync our kernel with asus to reduce rebase work.

origin:
https://github.com/TinkerBoard/debian_kernel/blob/linux4.4-rk3288/arch/arm/boot/dts/rk3288-miniarm.dts
with dmc and camera nodes deleted

Change-Id: I7e699ca57465c03f41acb4ae47e5e70794118489
Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com>

diff --git a/arch/arm/boot/dts/rk3288-miniarm.dts b/arch/arm/boot/dts/rk3288-miniarm.dts
index 6d3eb0a0b05b43175670c4b6ab8cba5b2ecd8f83..b746ad79b29166ea5d31190990a12fe20343c212 100644 (file)
--- a/arch/arm/boot/dts/rk3288-miniarm.dts
+++ b/arch/arm/boot/dts/rk3288-miniarm.dts
@@ -39,6 +39,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/rockchip,rk808.h>
 #include "rk3288.dtsi"
 
 / {
@@ -49,6 +50,27 @@
                reg = <0x0 0x0 0x0 0x80000000>;
        };
 
+       wireless-bluetooth {
+               compatible = "bluetooth-platdata";
+               uart_rts_gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default","rts_gpio";
+               pinctrl-0 = <&uart0_rts>;
+               pinctrl-1 = <&uart0_gpios>;
+               BT,reset_gpio    = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+               BT,wake_gpio     = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+               BT,wake_host_irq = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+               status = "okay";
+       };
+
+       wireless-wlan {
+               compatible = "wlan-platdata";
+               rockchip,grf = <&grf>;
+               wifi_chip_type = "ap6212";
+               sdio_vref = <1800>;
+               WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+               status = "okay";
+       };
+
        ext_gmac: external-gmac-clock {
                compatible = "fixed-clock";
                clock-frequency = <125000000>;
@@ -56,6 +78,23 @@
                #clock-cells = <0>;
        };
 
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               clocks = <&rk808 RK808_CLKOUT1>;
+               clock-names = "ext_clock";
+               pinctrl-names = "default";
+               pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
+
+               /*
+                * On the module itself this is one of these (depending
+                * on the actual card populated):
+                * - SDIO_RESET_L_WL_REG_ON
+                * - PDN (power down when low)
+                */
+               reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+                       <&gpio4 27 GPIO_ACTIVE_LOW>;
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
                #address-cells = <1>;
@@ -79,14 +118,19 @@
                compatible = "gpio-leds";
 
                pwr-led {
-                       gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "default-on";
                };
 
                act-led {
-                       gpios=<&gpio2 3 GPIO_ACTIVE_LOW>;
+                       gpios=<&gpio1 24 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger="mmc0";
                };
+
+               led1-led {
+                       gpios=<&gpio1 25 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger="default-off";
+               };
        };
 
        sound {
@@ -149,6 +193,15 @@
        status = "ok";
 };
 
+&dsi0 {
+       status = "disabled";
+       mipi_panel: mipi-panel {
+               compatible ="asus,tc358762";
+               reg = <0>;
+               status = "okay";
+       };
+};
+
 &gpu {
        mali-supply = <&vdd_gpu>;
        status = "okay";
@@ -208,7 +261,7 @@
                                regulator-always-on;
                                regulator-boot-on;
                                regulator-min-microvolt = <750000>;
-                               regulator-max-microvolt = <1350000>;
+                               regulator-max-microvolt = <1450000>;
                                regulator-name = "vdd_arm";
                                regulator-ramp-delay = <6000>;
                                regulator-state-mem {
@@ -368,6 +421,49 @@
 
 &i2c2 {
        status = "okay";
+
+       m24c08@50 {
+               compatible = "at,24c08";
+               reg = <0x50>;
+       };
+};
+
+&i2c1 {
+       status = "okay";
+
+       pcm5122: pcm5122@4c {
+               #sound-dai-cells = <0>;
+               compatible = "ti,pcm5122";
+               reg = <0x4c>;
+               status = "disabled";
+       };
+};
+
+&i2c3 {
+       status = "okay";
+};
+
+&i2c4 {
+       status = "okay";
+};
+
+&spi2 {
+       status = "okay";
+       max-freq = <50000000>;
+
+       spidev@0 {
+               compatible = "rockchip,spi_tinker";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               spi-cpha = <1>;
+       };
+
+       spidev@1 {
+               compatible = "rockchip,spi_tinker";
+               reg = <1>;
+               spi-max-frequency = <50000000>;
+               spi-cpha = <1>;
+       };
 };
 
 &i2s {
@@ -379,13 +475,28 @@
        status = "okay";
 
        sdcard-supply = <&vccio_sd>;
+       wifi-supply = <&vcc_18>;
 };
 
-&pwm0 {
+&sdio0 {
        status = "okay";
+       clock-frequency = <50000000>;
+       clock-freq-min-max = <200000 50000000>;
+       bus-width = <4>;
+       cap-sd-highspeed;
+       cap-sdio-irq;
+       disable-wp;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&sdio_pwrseq>;
+       non-removable;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+       sd-uhs-sdr104;
+       supports-sdio;
 };
 
-&rga {
+&pwm0 {
        status = "okay";
 };
 
@@ -398,6 +509,10 @@
        bus-width = <4>;
        cap-mmc-highspeed;
        cap-sd-highspeed;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
        card-detect-delay = <200>;
        disable-wp;                     /* wp not hooked up */
        num-slots = <1>;
@@ -416,6 +531,8 @@
 };
 
 &uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_xfer>, <&uart0_cts>;
        status = "okay";
 };
 
@@ -522,6 +639,15 @@
                };
        };
 
+       sdio-pwrseq {
+               wifi_enable_h: wifi-enable-h {
+                       rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+               chip_enable_h: chip-enable-h {
+                       rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
        sdmmc {
                /*
                 * Default drive strength isn't enough to achieve even
@@ -556,4 +682,10 @@
                        rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
                };
        };
+
+       wireless-bluetooth {
+               uart0_gpios: uart0-gpios {
+                       rockchip,pins = <4 19 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
 };