sfc: SFT9001/SFN4111T: Check PHY boot status during board initialisation
authorBen Hutchings <bhutchings@solarflare.com>
Fri, 27 Feb 2009 13:06:45 +0000 (13:06 +0000)
committerDavid S. Miller <davem@davemloft.net>
Mon, 2 Mar 2009 11:15:03 +0000 (03:15 -0800)
During SFN4111T initialisation, check whether the PHY boot status
indicates a bad firmware checksum.  If so, prepare to reflash rather
than continuing with normal initialisation.

Remove redundant PHY boot status check from tenxpress_phy_init().

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/sfc/phy.h
drivers/net/sfc/sfe4001.c
drivers/net/sfc/tenxpress.c

index 07e855c148bc3ce6c0eb409ff1cc87ad5e8faf84..f6e47227d24553e5d321bcd11fc641e81c3aaf60 100644 (file)
@@ -18,6 +18,10 @@ extern struct efx_phy_operations falcon_sft9001_phy_ops;
 
 extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
 
+/* Wait for the PHY to boot. Return 0 on success, -EINVAL if the PHY failed
+ * to boot due to corrupt flash, or some other negative error code. */
+extern int sft9001_wait_boot(struct efx_nic *efx);
+
 /****************************************************************************
  * Exported functions from the driver for XFP optical PHYs
  */
index c0e90683162339570a03154b14ae0a46e1ce4855..4eac5da81e5aeab2816222235be680cc6d3607ac 100644 (file)
@@ -399,6 +399,7 @@ static struct i2c_board_info sfn4111t_r5_hwmon_info = {
 
 int sfn4111t_init(struct efx_nic *efx)
 {
+       int i = 0;
        int rc;
 
        efx->board_info.hwmon_client =
@@ -417,13 +418,20 @@ int sfn4111t_init(struct efx_nic *efx)
        if (rc)
                goto fail_hwmon;
 
-       if (efx->phy_mode & PHY_MODE_SPECIAL) {
-               efx_stats_disable(efx);
-               sfn4111t_reset(efx);
-       }
-
-       return 0;
+       do {
+               if (efx->phy_mode & PHY_MODE_SPECIAL) {
+                       /* PHY may not generate a 156.25 MHz clock and MAC
+                        * stats fetch will fail. */
+                       efx_stats_disable(efx);
+                       sfn4111t_reset(efx);
+               }
+               rc = sft9001_wait_boot(efx);
+               if (rc == 0)
+                       return 0;
+               efx->phy_mode = PHY_MODE_SPECIAL;
+       } while (rc == -EINVAL && ++i < 2);
 
+       device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
 fail_hwmon:
        i2c_unregister_device(efx->board_info.hwmon_client);
        return rc;
index 23583ba2e7eb9d28ff356f7c0e44517e22c49b4c..e61dc4d4741c973d59ce4c33c7d332eb0a5fa6fa 100644 (file)
 #define PCS_10GBASET_BLKLK_WIDTH 1
 
 /* Boot status register */
-#define PCS_BOOT_STATUS_REG    53248
-#define PCS_BOOT_FATAL_ERR_LBN (0)
-#define PCS_BOOT_PROGRESS_LBN  (1)
-#define PCS_BOOT_PROGRESS_WIDTH        (2)
-#define PCS_BOOT_COMPLETE_LBN  (3)
-
-#define PCS_BOOT_MAX_DELAY     (100)
-#define PCS_BOOT_POLL_DELAY    (10)
+#define PCS_BOOT_STATUS_REG            53248
+#define PCS_BOOT_FATAL_ERROR_LBN       0
+#define PCS_BOOT_PROGRESS_LBN          1
+#define PCS_BOOT_PROGRESS_WIDTH                2
+#define PCS_BOOT_PROGRESS_INIT         0
+#define PCS_BOOT_PROGRESS_WAIT_MDIO    1
+#define PCS_BOOT_PROGRESS_CHECKSUM     2
+#define PCS_BOOT_PROGRESS_JUMP         3
+#define PCS_BOOT_DOWNLOAD_WAIT_LBN     3
+#define PCS_BOOT_CODE_STARTED_LBN      4
 
 /* 100M/1G PHY registers */
 #define GPHY_XCONTROL_REG      49152
@@ -230,40 +232,62 @@ static ssize_t set_phy_short_reach(struct device *dev,
 static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
                   set_phy_short_reach);
 
-/* Check that the C166 has booted successfully */
-static int tenxpress_phy_check(struct efx_nic *efx)
+int sft9001_wait_boot(struct efx_nic *efx)
 {
-       int phy_id = efx->mii.phy_id;
-       int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
+       unsigned long timeout = jiffies + HZ + 1;
        int boot_stat;
 
-       /* Wait for the boot to complete (or not) */
-       while (count) {
-               boot_stat = mdio_clause45_read(efx, phy_id,
+       for (;;) {
+               boot_stat = mdio_clause45_read(efx, efx->mii.phy_id,
                                               MDIO_MMD_PCS,
                                               PCS_BOOT_STATUS_REG);
-               if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
-                       break;
-               count--;
-               udelay(PCS_BOOT_POLL_DELAY);
-       }
+               if (boot_stat >= 0) {
+                       EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat);
+                       switch (boot_stat &
+                               ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+                                (3 << PCS_BOOT_PROGRESS_LBN) |
+                                (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
+                                (1 << PCS_BOOT_CODE_STARTED_LBN))) {
+                       case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+                             (PCS_BOOT_PROGRESS_CHECKSUM <<
+                              PCS_BOOT_PROGRESS_LBN)):
+                       case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+                             (PCS_BOOT_PROGRESS_INIT <<
+                              PCS_BOOT_PROGRESS_LBN) |
+                             (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
+                               return -EINVAL;
+                       case ((PCS_BOOT_PROGRESS_WAIT_MDIO <<
+                              PCS_BOOT_PROGRESS_LBN) |
+                             (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
+                               return (efx->phy_mode & PHY_MODE_SPECIAL) ?
+                                       0 : -EIO;
+                       case ((PCS_BOOT_PROGRESS_JUMP <<
+                              PCS_BOOT_PROGRESS_LBN) |
+                             (1 << PCS_BOOT_CODE_STARTED_LBN)):
+                       case ((PCS_BOOT_PROGRESS_JUMP <<
+                              PCS_BOOT_PROGRESS_LBN) |
+                             (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
+                             (1 << PCS_BOOT_CODE_STARTED_LBN)):
+                               return (efx->phy_mode & PHY_MODE_SPECIAL) ?
+                                       -EIO : 0;
+                       default:
+                               if (boot_stat & (1 << PCS_BOOT_FATAL_ERROR_LBN))
+                                       return -EIO;
+                               break;
+                       }
+               }
 
-       if (!count) {
-               EFX_ERR(efx, "%s: PHY boot timed out. Last status "
-                       "%x\n", __func__,
-                       (boot_stat >> PCS_BOOT_PROGRESS_LBN) &
-                       ((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
-               return -ETIMEDOUT;
-       }
+               if (time_after_eq(jiffies, timeout))
+                       return -ETIMEDOUT;
 
-       return 0;
+               msleep(50);
+       }
 }
 
 static int tenxpress_init(struct efx_nic *efx)
 {
        int phy_id = efx->mii.phy_id;
        int reg;
-       int rc;
 
        if (efx->phy_type == PHY_TYPE_SFX7101) {
                /* Enable 312.5 MHz clock */
@@ -286,10 +310,6 @@ static int tenxpress_init(struct efx_nic *efx)
                                       false);
        }
 
-       rc = tenxpress_phy_check(efx);
-       if (rc < 0)
-               return rc;
-
        /* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
        if (efx->phy_type == PHY_TYPE_SFX7101) {
                mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
@@ -300,7 +320,7 @@ static int tenxpress_init(struct efx_nic *efx)
                                    PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
        }
 
-       return rc;
+       return 0;
 }
 
 static int tenxpress_phy_init(struct efx_nic *efx)