mmc: mmci: Add DT bindings for feedback clock pin

The ST Micro variant supports the option of using a feedback clock signal in
favor of the clockout pin when latching incoming signals on the data bus.

Since this is matter of how pins are being routed we need to provide a new DT
binding to be able to configure this through DT.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt
index 9bd2ffa704a7dc92af49f2ed1f256b5b19ae8d8c..2c8756fb7755feb3209b40928f2cea4899415cab 100644 (file)
--- a/Documentation/devicetree/bindings/mmc/mmci.txt
+++ b/Documentation/devicetree/bindings/mmc/mmci.txt
@@ -24,6 +24,7 @@ Optional properties:
 - st,sig-dir-dat31       : bus signal direction pin used for DAT[3] and DAT[1].
 - st,sig-dir-dat74       : bus signal direction pin used for DAT[4] to DAT[7].
 - st,sig-dir-cmd         : cmd signal direction pin used for CMD.
+- st,sig-pin-fbclk       : feedback clock signal pin used.
 
 Example:
 
@@ -47,6 +48,7 @@ sdi0_per1@80126000 {
        st,sig-dir-dat0;
        st,sig-dir-dat2;
        st,sig-dir-cmd;
+       st,sig-pin-fbclk;
 
        vmmc-supply = <&ab8500_ldo_aux3_reg>;
        vqmmc-supply = <&vmmci>;

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index aa26e810b7ad6981144865fd06d2fc1b2f09304a..2ce9111c4627d180fd450457be2458cad0ba253d 100644 (file)
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1402,6 +1402,8 @@ static void mmci_dt_populate_generic_pdata(struct device_node *np,
                pdata->sigdir |= MCI_ST_DATA74DIREN;
        if (of_get_property(np, "st,sig-dir-cmd", NULL))
                pdata->sigdir |= MCI_ST_CMDDIREN;
+       if (of_get_property(np, "st,sig-pin-fbclk", NULL))
+               pdata->sigdir |= MCI_ST_FBCLKEN;
 
        pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
        pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);